Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Non emerge più! [Risolto]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 9:41 am    Post subject: Non emerge più! [Risolto] Reply with quote

Ecco in sequenza i casini che ho combinato questa volta sul mio portatile ASUS con processore AMD64:
Ho aggiornato gcc seguendo la guida...Dando
Code:
emerge -uav gcc
ha cercato di reinstallarmi anche le glibc, ma la compilazione falliva...
Sono riuscito a portarla a termine usando la flag USE profile.
Poi ho dato
Code:
emerge -euND system
ed è successo il finimondo: emerge non funzionava più.
Allora ho seguito quest'altra guida per ripristinarlo.
Dopo emerge funzionava di nuovo.
Allora faccio un'altro emerge system e:
Code:
candasus canduc # emerge -euND system
Calculating system dependencies... done!
>>> Verifying ebuild Manifests...

>>> Emerging (1 of 119) sys-apps/portage-2.1.3.19 to /
 * portage-2.1.3.16.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                            [ ok ]
 * portage-2.1.3.19.patch.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                          [ ok ]
 * checking ebuild checksums ;-) ...                                                                                                                   [ ok ]
 * checking auxfile checksums ;-) ...                                                                                                                  [ ok ]
 * checking miscfile checksums ;-) ...                                                                                                                 [ ok ]
 * checking portage-2.1.3.16.tar.bz2 ;-) ...                                                                                                           [ ok ]
 * checking portage-2.1.3.19.patch.bz2 ;-) ...                                                                                                         [ ok ]
>>> Unpacking source...
>>> Unpacking portage-2.1.3.16.tar.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
>>> Unpacking portage-2.1.3.19.patch.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
 * Applying portage-2.1.3.19.patch ...                                                                                                                 [ ok ]
 * Setting portage.VERSION to 2.1.3.19 ...
libsandbox:  Can't resolve getcwd: (null)
 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_unpack
 *                 ebuild.sh, line  817:  Called qa_call 'src_unpack'
 *                 ebuild.sh, line   44:  Called src_unpack
 *   portage-2.1.3.19.ebuild, line   79:  Called die
 * The specific snippet of code:
 *      sed -i "s/^VERSION=.*/VERSION=\"${PVR}\"/" pym/portage.py || \
 *              die "Failed to patch portage.VERSION"
 *  The die message:
 *   Failed to patch portage.VERSION
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.
 *

 * Messages for package sys-apps/portage-2.1.3.19:

 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_unpack
 *                 ebuild.sh, line  817:  Called qa_call 'src_unpack'
 *                 ebuild.sh, line   44:  Called src_unpack
 *   portage-2.1.3.19.ebuild, line   79:  Called die
 * The specific snippet of code:
 *      sed -i "s/^VERSION=.*/VERSION=\"${PVR}\"/" pym/portage.py || \
 *              die "Failed to patch portage.VERSION"
 *  The die message:
 *   Failed to patch portage.VERSION
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.
 *
candasus canduc #
Che cavolo succede?
Perchè seguendo le guide non và mai una mazza? :evil: :evil: :evil:
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)


Last edited by canduc17 on Sat Feb 02, 2008 3:35 pm; edited 3 times in total
Back to top
View user's profile Send private message
koma
Advocate
Advocate


Joined: 06 Jun 2003
Posts: 2702
Location: Italy

PostPosted: Fri Feb 01, 2008 9:47 am    Post subject: Reply with quote

prova a usare -sandbox nelle features
_________________
Remember! Gnu is not Unix!
http://www.youtube.com/watch?v=_yoJI-Tl94g GLORY GLORY HYPNOTOAD
Linux Counter[code:1]
User n° #466586
ID 375005 EkatombeII
ID 375006 Apocalypto
ID 375007 KHP[/code:1]
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 10:12 am    Post subject: Reply with quote

Code:
candasus canduc # emerge --info | grep FEATURES
FEATURES="distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch"
E dopo aver aggiunto
Code:
FEATURES="-sandbox"
a /etc/make.conf ottengo:
Code:
candasus canduc # emerge --info | grep FEATURES
FEATURES="distlocks metadata-transfer sfperms strict unmerge-orphans userfetch"

Però purtroppo:
Code:
candasus canduc # emerge -euND system
Calculating system dependencies... done!
>>> Verifying ebuild Manifests...

>>> Emerging (1 of 119) sys-apps/portage-2.1.3.19 to /
 * portage-2.1.3.16.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                            [ ok ]
 * portage-2.1.3.19.patch.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                          [ ok ]
 * checking ebuild checksums ;-) ...                                                                                                                   [ ok ]
 * checking auxfile checksums ;-) ...                                                                                                                  [ ok ]
 * checking miscfile checksums ;-) ...                                                                                                                 [ ok ]
 * checking portage-2.1.3.16.tar.bz2 ;-) ...                                                                                                           [ ok ]
 * checking portage-2.1.3.19.patch.bz2 ;-) ...                                                                                                         [ ok ]
>>> Unpacking source...
>>> Unpacking portage-2.1.3.16.tar.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
>>> Unpacking portage-2.1.3.19.patch.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
 * Applying portage-2.1.3.19.patch ...                                                                                                                 [ ok ]
 * Setting portage.VERSION to 2.1.3.19 ...                                                                                                             [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/sys-apps/portage-2.1.3.19/work/portage-2.1.3.16 ...
>>> Source compiled.
>>> Test phase [not enabled]: sys-apps/portage-2.1.3.19

>>> Install portage-2.1.3.19 into /var/tmp/portage/sys-apps/portage-2.1.3.19/image/ category sys-apps
patching file make.conf
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 141: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 153: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 153: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 153: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 170: dodir: command not found
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/ebuild': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/emerge': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/portageq': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/repoman': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/tbz2tool': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/xpak': No such file or directory
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 175: dodir: command not found
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/archive-conf': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/dispatch-conf': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/emaint': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/emerge-webrsync': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/env-update': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/etc-update': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/fixpackages': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/quickpkg': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/regenworld': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/update-env': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/update-etc': No such file or directory
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 192: dodir: command not found
/usr/lib64/portage/bin/ebuild.sh: line 421: dodir: command not found
touch: cannot touch `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//etc/portage/.keep_sys-apps_portage-0': No such file or directory
 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_install
 *                 ebuild.sh, line 1138:  Called qa_call 'src_install'
 *                 ebuild.sh, line   44:  Called src_install
 *   portage-2.1.3.19.ebuild, line  193:  Called keepdir '/etc/portage'
 *                 ebuild.sh, line  431:  Called die
 * The specific snippet of code:
 *                      touch "${D}${x}/.keep_${CATEGORY}_${PN}-${SLOT}" || \
 *                              die "Failed to create .keep in ${D}${x}"
 *  The die message:
 *   Failed to create .keep in /var/tmp/portage/sys-apps/portage-2.1.3.19/image//etc/portage
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.
 *

 * Messages for package sys-apps/portage-2.1.3.19:

 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_install
 *                 ebuild.sh, line 1138:  Called qa_call 'src_install'
 *                 ebuild.sh, line   44:  Called src_install
 *   portage-2.1.3.19.ebuild, line  193:  Called keepdir '/etc/portage'
 *                 ebuild.sh, line  431:  Called die
 * The specific snippet of code:
 *                      touch "${D}${x}/.keep_${CATEGORY}_${PN}-${SLOT}" || \
 *                              die "Failed to create .keep in ${D}${x}"
 *  The die message:
 *   Failed to create .keep in /var/tmp/portage/sys-apps/portage-2.1.3.19/image//etc/portage
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.

_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Fri Feb 01, 2008 11:10 am    Post subject: Reply with quote

Probabilmente Portage è andato a $donne_di_facili_costumi.

Prova a seguire la guida Riparare manualmente installazioni di portage non funzionanti.
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 11:20 am    Post subject: Reply with quote

Scen wrote:
Prova a seguire la guida Riparare manualmente installazioni di portage non funzionanti.

L'ho già fatto, l'ho scritto sopra...
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Fri Feb 01, 2008 11:37 am    Post subject: Reply with quote

canduc17 wrote:
Scen wrote:
Prova a seguire la guida Riparare manualmente installazioni di portage non funzionanti.

L'ho già fatto, l'ho scritto sopra...

Ops :oops: , mi era sfuggito!

Comunque scrivi
canduc17 wrote:

Allora ho seguito quest'altra guida per ripristinarlo.
Dopo emerge funzionava di nuovo.

Quindi il ripristino funziona. Però poi c'è qualcosa che rompe nuovamente l'installazione, in base a quanto scrivi.

Leggo inoltre che hai aggiornato GCC: ti dico per esperienza che NON E' ASSOLUTAMENTE NECESSARIO ricompilare tutto system e tutto world, basta seguire i comandi del Codice 2.1.
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 11:43 am    Post subject: Reply with quote

Scen wrote:
Leggo inoltre che hai aggiornato GCC: ti dico per esperienza che NON E' ASSOLUTAMENTE NECESSARIO ricompilare tutto system e tutto world, basta seguire i comandi del Codice 2.1.
Sì, ok...tornando indietro non lo rifarei neanche se mi pagassero...Ma mi sembrava necessario, visto che c'erano un sacco di aggiornamenti...

Il fatto è che adesso non riesco più ad installare una mazza...
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Fri Feb 01, 2008 11:54 am    Post subject: Reply with quote

canduc17 wrote:
Il fatto è che adesso non riesco più ad installare una mazza...

Torniamo all'inizio: ripristinato Portage, riesci ad emergere qualche semplice pacchetto?

L'aggiornamento di GCC l'hai fatto, seguendo i comandi che ti ho evidenziato precedentemente?
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 12:09 pm    Post subject: Reply with quote

Scen wrote:
Torniamo all'inizio: ripristinato Portage, riesci ad emergere qualche semplice pacchetto?
Sì...tipo ho riemerso libtool e sandbox per provare e funzia.
Scen wrote:
L'aggiornamento di GCC l'hai fatto, seguendo i comandi che ti ho evidenziato precedentemente?
Sì, ma l'avevo già fatto prima di aprire il topic...devo rifarlo?!
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Fri Feb 01, 2008 12:49 pm    Post subject: Reply with quote

[quote="canduc17"]
Scen wrote:
tipo ho riemerso libtool e sandbox per provare e funzia

Ok: portage riesce ad auto-reinstallarsi? Ovvero
Code:

emerge portage

va a buon fine?

canduc17 wrote:

Scen wrote:
L'aggiornamento di GCC l'hai fatto, seguendo i comandi che ti ho evidenziato precedentemente?
Sì, ma l'avevo già fatto prima di aprire il topic...devo rifarlo?!

No, non è necessario. Controlla che la versione di GCC che stai utilizzando sia quella corretta (tramite gcc-config -l), dopodichè dovresti essere apposto.

Ripeto, non "intestardirti" a riemerge il metapacchetto system, prosegui con un bel
Code:

emerge -aDuv world

e sei apposto.
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 1:08 pm    Post subject: Reply with quote

Scen wrote:
portage riesce ad auto-reinstallarsi?
No:
Code:
candasus canduc # emerge -v portage

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] sys-apps/portage-2.1.3.19  USE="-build -doc -epydoc (-selinux)" LINGUAS="-pl" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB

>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) sys-apps/portage-2.1.3.19 to /
 * portage-2.1.3.16.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                          [ ok ]
 * portage-2.1.3.19.patch.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                        [ ok ]
 * checking ebuild checksums ;-) ...                                                                                                                 [ ok ]
 * checking auxfile checksums ;-) ...                                                                                                                [ ok ]
 * checking miscfile checksums ;-) ...                                                                                                               [ ok ]
 * checking portage-2.1.3.16.tar.bz2 ;-) ...                                                                                                         [ ok ]
 * checking portage-2.1.3.19.patch.bz2 ;-) ...                                                                                                       [ ok ]
>>> Unpacking source...
>>> Unpacking portage-2.1.3.16.tar.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
>>> Unpacking portage-2.1.3.19.patch.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
 * Applying portage-2.1.3.19.patch ...                                                                                                               [ ok ]
 * Setting portage.VERSION to 2.1.3.19 ...                                                                                                           [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/sys-apps/portage-2.1.3.19/work/portage-2.1.3.16 ...
libsandbox:  Can't resolve access: (null)
 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_compile
 *                 ebuild.sh, line 1039:  Called qa_call 'src_compile'
 *                 ebuild.sh, line   44:  Called src_compile
 *   portage-2.1.3.19.ebuild, line   92:  Called die
 * The specific snippet of code:
 *      $(tc-getCC) ${CFLAGS} ${LDFLAGS} -o tbz2tool tbz2tool.c || \
 *              die "Failed to build tbz2tool"
 *  The die message:
 *   Failed to build tbz2tool
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.
Che poi era il primo pacchetto che tentava di installare dando emerge system

Scen wrote:
Controlla che la versione di GCC che stai utilizzando sia quella corretta
Qui mi sembra vada bene:
Code:
candasus canduc # gcc-config -l
 [1] x86_64-pc-linux-gnu-4.1.2 *
candasus canduc #

Scen wrote:
non "intestardirti" a riemerge il metapacchetto system
Ok
Scen wrote:
...prosegui con un bel
Code:
emerge -aDuv world
e sei apposto.
Lo farei veramente volentieri, se funzionasse
Code:
candasus canduc # emerge -Duv world

These are the packages that would be merged, in order:

Calculating world dependencies... done!
[ebuild     U ] dev-libs/expat-2.0.1 [1.95.8] USE="(-test%)" 0 kB
[ebuild     U ] app-arch/bzip2-1.0.4-r1 [1.0.3-r6] USE="-static (-build%)" 0 kB
[ebuild     U ] dev-util/pkgconfig-0.22 [0.20] USE="-hardened" 0 kB
[ebuild     U ] app-misc/pax-utils-0.1.16 [0.1.15] USE="-caps" 0 kB
[ebuild     U ] sys-libs/timezone-data-2007j [2007c] USE="nls" 0 kB
[ebuild     U ] app-arch/cpio-2.9-r1 [2.6-r5] USE="nls" 0 kB
[ebuild     U ] sys-apps/hdparm-7.7 [6.6] 0 kB
[ebuild     U ] sys-apps/sysvinit-2.86-r10 [2.86-r6] USE="(-ibm) (-selinux) -static" 0 kB
[ebuild  N    ] dev-libs/libpcre-7.4  USE="unicode -doc" 0 kB
[ebuild     U ] net-misc/iputils-20070202 [20060512] USE="ipv6 -doc -static" 0 kB
[ebuild     U ] sys-process/procps-3.2.7 [3.2.6] USE="(-n32)" 0 kB
[ebuild     U ] sys-apps/less-416 [394] USE="unicode" 0 kB
[ebuild     U ] sys-libs/readline-5.2_p7 [5.1_p4] 0 kB
[ebuild     U ] sys-devel/m4-1.4.10 [1.4.7] USE="nls -examples%" 0 kB
[ebuild     U ] sys-apps/man-1.6e-r3 [1.6d] USE="nls" 0 kB
[ebuild     U ] sys-devel/flex-2.5.33-r3 [2.5.33-r2] USE="nls -static" 0 kB
[ebuild     U ] app-editors/nano-2.0.6 [2.0.2] USE="ncurses nls unicode -debug -justify -minimal -slang -spell" 0 kB
[ebuild     U ] sys-apps/findutils-4.3.11 [4.3.2-r1] USE="nls (-selinux) -static" 0 kB
[ebuild     U ] sys-apps/grep-2.5.1a-r1 [2.5.1-r8] USE="nls pcre%* -static (-build%)" 0 kB
[ebuild     U ] sys-apps/net-tools-1.60-r13 [1.60-r12] USE="nls -static" 0 kB
[ebuild     U ] app-arch/gzip-1.3.12 [1.3.5-r10] USE="nls -pic -static (-build%)" 0 kB
[ebuild     U ] sys-apps/kbd-1.13-r1 [1.12-r8] USE="nls" 0 kB
[ebuild     U ] sys-apps/gawk-3.1.5-r5 [3.1.5-r2] USE="nls" 0 kB
[ebuild     U ] app-arch/tar-1.19 [1.16-r2] USE="nls -static" 0 kB
[ebuild     U ] sys-devel/binutils-config-1.9-r4 [1.9-r3] 0 kB
[ebuild  N    ] app-i18n/man-pages-it-2.65  0 kB
[ebuild  N    ] sys-devel/bc-1.06-r6  USE="readline -static" 0 kB
[ebuild     U ] sys-libs/com_err-1.40.3 [1.39] USE="nls" 0 kB
[ebuild     U ] sys-apps/man-pages-2.75 [2.42] USE="nls" 0 kB
[ebuild  NS   ] sys-libs/db-4.5.20_p2  USE="-bootstrap -doc -java -nocxx -tcl -test" 0 kB
[ebuild     U ] sys-apps/diffutils-2.8.7-r2 [2.8.7-r1] USE="nls -static" 0 kB
[ebuild     U ] sys-libs/ss-1.40.3 [1.39] USE="nls" 0 kB
[ebuild     U ] sys-fs/e2fsprogs-1.40.3 [1.39] USE="nls -static" 0 kB
[ebuild     U ] sys-apps/util-linux-2.13-r2 [2.12r-r5] USE="crypt nls -old-linux% (-selinux) (-old-crypt%) (-perl%*) (-static%)" 0 kB
[ebuild     U ] dev-lang/perl-5.8.8-r4 [5.8.8-r2] USE="berkdb gdbm -build -debug -doc -ithreads -perlsuid" 0 kB
[ebuild     U ] sys-devel/autoconf-2.61-r1 [2.61] USE="-emacs" 0 kB
[ebuild     U ] sys-apps/attr-2.4.39 [2.4.32] USE="nls" 0 kB
[ebuild     U ] sys-process/psmisc-22.5-r2 [22.2] USE="X* ipv6 nls (-selinux)" 0 kB
[ebuild     U ] sys-apps/acl-2.2.45 [2.2.39-r1] USE="nls (-nfs)" 0 kB
[ebuild     U ] sys-apps/coreutils-6.9-r1 [6.4] USE="acl nls (-selinux) -static -xattr%" 0 kB
[ebuild     U ] net-misc/rsync-2.6.9-r5 [2.6.9-r1] USE="acl ipv6 -static -xinetd" 0 kB
[ebuild     U ] dev-libs/openssl-0.9.8g [0.9.8d] USE="(sse2) zlib -bindist -emacs -gmp% -kerberos% -test" 0 kB
[ebuild     U ] app-misc/ca-certificates-20070303-r1 [20061027.2] 0 kB
[ebuild     U ] sys-libs/cracklib-2.8.10 [2.8.9-r1] USE="nls python" 0 kB
[ebuild     U ] sys-apps/file-4.21-r1 [4.20-r1] USE="python" 0 kB
[ebuild     U ] sys-libs/pam-0.99.9.0 [0.78-r5] USE="cracklib%* nls%* -audit% (-selinux) -test% -vim-syntax% (-berkdb%*) (-nis%) (-pam_chroot%) (-pam_console%) (-pam_timestamp%) (-pwdb%)" 0 kB
[ebuild     U ] sys-apps/shadow-4.0.18.1-r1 [4.0.18.1] USE="cracklib nls pam -nousuid (-selinux) -skey" 0 kB
[ebuild     U ] sys-apps/busybox-1.8.2 [1.2.2.1] USE="pam%* -debug -make-symlinks -savedconfig (-selinux) -static (-netboot%)" 0 kB
[ebuild     U ] net-misc/openssh-4.7_p1-r1 [4.5_p1-r1] USE="X* pam tcpd -X509 -chroot -hpn -kerberos -ldap -libedit (-selinux) -skey -smartcard -static" 0 kB
[ebuild     U ] sys-apps/module-init-tools-3.4 [3.2.2-r2] USE="-old-linux% (-no-old-linux%)" 0 kB
[ebuild     U ] sys-apps/debianutils-2.25 [2.15-r1] USE="-static (-build%)" 0 kB
[ebuild  N    ] sys-apps/mktemp-1.5  0 kB
[ebuild     U ] sys-apps/baselayout-1.12.10-r5 [1.12.9] USE="unicode -bootstrap -build -static (-ldap%)" 0 kB

Total: 53 packages (48 upgrades, 4 new, 1 in new slot), Size of downloads: 0 kB

>>> Verifying ebuild Manifests...

>>> Emerging (1 of 53) dev-libs/expat-2.0.1 to /
 * expat-2.0.1.tar.gz RMD160 SHA1 SHA256 size ;-) ...                                                                                                [ ok ]
 * checking ebuild checksums ;-) ...                                                                                                                 [ ok ]
 * checking auxfile checksums ;-) ...                                                                                                                [ ok ]
 * checking miscfile checksums ;-) ...                                                                                                               [ ok ]
 * checking expat-2.0.1.tar.gz ;-) ...                                                                                                               [ ok ]
>>> Unpacking source...
>>> Unpacking expat-2.0.1.tar.gz to /var/tmp/portage/dev-libs/expat-2.0.1/work
 * Running elibtoolize in: expat-2.0.1/conftools
 *   Applying install-sh-1.5.patch ...
 *   Applying portage-1.5.10.patch ...
 *   Applying max_cmd_len-1.5.20.patch ...
 *   Applying sed-1.5.6.patch ...
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/dev-libs/expat-2.0.1/work/expat-2.0.1 ...
 * econf: updating expat-2.0.1/conftools/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating expat-2.0.1/conftools/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=x86_64-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --libdir=/usr/lib64 --build=x86_64-pc-linux-gnu
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ANSI C... none needed
libsandbox:  Can't resolve getcwd: (null)
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... libsandbox:  Can't resolve getcwd: (null)
x86_64-pc-linux-gnu-gcc -E
libsandbox:  Can't resolve getcwd: (null)
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for x86_64-pc-linux-gnu-g++... x86_64-pc-linux-gnu-g++
checking whether we are using the GNU C++ compiler... no
checking whether x86_64-pc-linux-gnu-g++ accepts -g... yes
checking how to run the C++ preprocessor... x86_64-pc-linux-gnu-g++ -E
checking for x86_64-pc-linux-gnu-g77... no
checking for x86_64-pc-linux-gnu-f77... no
checking for x86_64-pc-linux-gnu-xlf... no
checking for x86_64-pc-linux-gnu-frt... no
checking for x86_64-pc-linux-gnu-pgf77... no
checking for x86_64-pc-linux-gnu-fort77... no
checking for x86_64-pc-linux-gnu-fl32... no
checking for x86_64-pc-linux-gnu-af77... no
checking for x86_64-pc-linux-gnu-f90... no
checking for x86_64-pc-linux-gnu-xlf90... no
checking for x86_64-pc-linux-gnu-pgf90... no
checking for x86_64-pc-linux-gnu-epcf90... no
checking for x86_64-pc-linux-gnu-f95... no
checking for x86_64-pc-linux-gnu-fort... no
checking for x86_64-pc-linux-gnu-xlf95... no
checking for x86_64-pc-linux-gnu-ifc... no
checking for x86_64-pc-linux-gnu-efc... no
checking for x86_64-pc-linux-gnu-pgf95... no
checking for x86_64-pc-linux-gnu-lf95... no
checking for x86_64-pc-linux-gnu-gfortran... x86_64-pc-linux-gnu-gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether x86_64-pc-linux-gnu-gfortran accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from x86_64-pc-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC
checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC works... yes
checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes
checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... libsandbox:  Can't resolve access: (null)
GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking for x86_64-pc-linux-gnu-g++ option to produce PIC...
checking if x86_64-pc-linux-gnu-g++ static flag  works... yes
checking if x86_64-pc-linux-gnu-g++ supports -c -o file.o... yes
checking whether the x86_64-pc-linux-gnu-g++ linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... unsupported
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for x86_64-pc-linux-gnu-gfortran option to produce PIC... -fPIC
checking if x86_64-pc-linux-gnu-gfortran PIC flag -fPIC works... yes
checking if x86_64-pc-linux-gnu-gfortran static flag -static works... yes
checking if x86_64-pc-linux-gnu-gfortran supports -c -o file.o... libsandbox:  Can't resolve getcwd: (null)
yes
checking whether the x86_64-pc-linux-gnu-gfortran linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for x86_64-pc-linux-gnu-gcc... (cached) x86_64-pc-linux-gnu-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... (cached) yes
checking for x86_64-pc-linux-gnu-gcc option to accept ANSI C... (cached) none needed
checking for a BSD-compatible install... /bin/install -c
checking whether x86_64-pc-linux-gnu-gcc accepts -fexceptions... yes
checking for ANSI C header files... (cached) yes
checking whether byte ordering is bigendian... no
checking for an ANSI C-conforming const... yes
checking for size_t... no
checking for memmove... yes
checking for bcopy... yes
checking fcntl.h usability... no
checking fcntl.h presence... yes
configure: WARNING: fcntl.h: present but cannot be compiled
configure: WARNING: fcntl.h:     check for missing prerequisite headers?
configure: WARNING: fcntl.h: see the Autoconf documentation
configure: WARNING: fcntl.h:     section "Present But Cannot Be Compiled"
configure: WARNING: fcntl.h: proceeding with the preprocessor's result
configure: WARNING: fcntl.h: in the future, the compiler will take precedence
configure: WARNING:     ## -------------------------------------- ##
configure: WARNING:     ## Report this to expat-bugs@libexpat.org ##
configure: WARNING:     ## -------------------------------------- ##
checking for fcntl.h... yes
checking for unistd.h... (cached) yes
checking for off_t... no
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for getpagesize... no
checking for working mmap... no
checking for an ANSI C99-conforming __func__... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating expat_config.h
/bin/sh ./libtool --silent --mode=compile x86_64-pc-linux-gnu-gcc -I./lib -I. -march=k8 -O2 -pipe -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions  -DHAVE_EXPAT_CONFIG_H -o lib/xmlparse.lo -c lib/xmlparse.c
/bin/sh ./libtool --silent --mode=compile x86_64-pc-linux-gnu-gcc -I./lib -I. -march=k8 -O2 -pipe -Wall -Wmissing-prototypes -Wstrict-prototypes -fexceptions  -DHAVE_EXPAT_CONFIG_H -o lib/xmltok.lo -c lib/xmltok.c
In file included from /usr/include/sys/types.h:8,
                 from /usr/include/gentoo-multilib/amd64/stdlib.h:438,
                 from /usr/include/stdlib.h:8,
                 from lib/expat.h:17,
                 from lib/xmlparse.c:24:
/usr/include/gentoo-multilib/amd64/sys/types.h:88: error: two or more data types in declaration specifiers
lib/xmlparse.c: In function 'parserCreate':
lib/xmlparse.c:722: warning: assignment from incompatible pointer type
make: *** [lib/xmlparse.lo] Error 1
make: *** Waiting for unfinished jobs....
 *
 * ERROR: dev-libs/expat-2.0.1 failed.
 * Call stack:
 *   ebuild.sh, line 1701:  Called dyn_compile
 *   ebuild.sh, line 1039:  Called qa_call 'src_compile'
 *   ebuild.sh, line   44:  Called src_compile
 *   ebuild.sh, line  711:  Called die
 * The specific snippet of code:
 *              emake || die "emake failed"
 *  The die message:
 *   emake failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/dev-libs/expat-2.0.1/temp/build.log'.
 *

 * Messages for package dev-libs/expat-2.0.1:

 *
 * ERROR: dev-libs/expat-2.0.1 failed.
 * Call stack:
 *   ebuild.sh, line 1701:  Called dyn_compile
 *   ebuild.sh, line 1039:  Called qa_call 'src_compile'
 *   ebuild.sh, line   44:  Called src_compile
 *   ebuild.sh, line  711:  Called die
 * The specific snippet of code:
 *              emake || die "emake failed"
 *  The die message:
 *   emake failed
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/dev-libs/expat-2.0.1/temp/build.log'.

_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Alakhai
Apprentice
Apprentice


Joined: 16 Oct 2003
Posts: 151

PostPosted: Fri Feb 01, 2008 1:20 pm    Post subject: Reply with quote

Quote:
libsandbox: Can't resolve access: (null)

questo è l'errore che ti impalla, hai provato a emergiare portage senza sandbox?
anteponi al comando emerge FEATURES="-sandbox"
_________________
Gentoo Linux 64Bit User
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 1:33 pm    Post subject: Reply with quote

Alakhai wrote:
hai provato a emergiare portage senza sandbox?
Sì, l'ho fatto sopra, come suggeritomi da koma.
L'output è questo:
Code:
candasus canduc # FEATURES="-sandbox" emerge -v portage

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R   ] sys-apps/portage-2.1.3.19  USE="-build -doc -epydoc (-selinux)" LINGUAS="-pl" 0 kB

Total: 1 package (1 reinstall), Size of downloads: 0 kB

>>> Verifying ebuild Manifests...

>>> Emerging (1 of 1) sys-apps/portage-2.1.3.19 to /
 * portage-2.1.3.16.tar.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                          [ ok ]
 * portage-2.1.3.19.patch.bz2 RMD160 SHA1 SHA256 size ;-) ...                                                                                        [ ok ]
 * checking ebuild checksums ;-) ...                                                                                                                 [ ok ]
 * checking auxfile checksums ;-) ...                                                                                                                [ ok ]
 * checking miscfile checksums ;-) ...                                                                                                               [ ok ]
 * checking portage-2.1.3.16.tar.bz2 ;-) ...                                                                                                         [ ok ]
 * checking portage-2.1.3.19.patch.bz2 ;-) ...                                                                                                       [ ok ]
>>> Unpacking source...
>>> Unpacking portage-2.1.3.16.tar.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
>>> Unpacking portage-2.1.3.19.patch.bz2 to /var/tmp/portage/sys-apps/portage-2.1.3.19/work
 * Applying portage-2.1.3.19.patch ...                                                                                                                 [ ok ]
 * Setting portage.VERSION to 2.1.3.19 ...                                                                                                             [ ok ]
>>> Source unpacked.
>>> Compiling source in /var/tmp/portage/sys-apps/portage-2.1.3.19/work/portage-2.1.3.16 ...
>>> Source compiled.
>>> Test phase [not enabled]: sys-apps/portage-2.1.3.19

>>> Install portage-2.1.3.19 into /var/tmp/portage/sys-apps/portage-2.1.3.19/image/ category sys-apps
patching file make.conf
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 141: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 153: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 153: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 153: dodir: command not found
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 170: dodir: command not found
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/ebuild': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/emerge': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/portageq': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/repoman': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/tbz2tool': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/bin/xpak': No such file or directory
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 175: dodir: command not found
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/archive-conf': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/dispatch-conf': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/emaint': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/emerge-webrsync': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/env-update': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/etc-update': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/fixpackages': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/quickpkg': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/regenworld': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/update-env': No such file or directory
/usr/lib64/portage/bin/dosym: line 12: dodir: command not found
ln: creating symbolic link `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//usr/sbin/update-etc': No such file or directory
/usr/portage/sys-apps/portage/portage-2.1.3.19.ebuild: line 192: dodir: command not found
/usr/lib64/portage/bin/ebuild.sh: line 421: dodir: command not found
touch: cannot touch `/var/tmp/portage/sys-apps/portage-2.1.3.19/image//etc/portage/.keep_sys-apps_portage-0': No such file or directory
 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_install
 *                 ebuild.sh, line 1138:  Called qa_call 'src_install'
 *                 ebuild.sh, line   44:  Called src_install
 *   portage-2.1.3.19.ebuild, line  193:  Called keepdir '/etc/portage'
 *                 ebuild.sh, line  431:  Called die
 * The specific snippet of code:
 *                      touch "${D}${x}/.keep_${CATEGORY}_${PN}-${SLOT}" || \
 *                              die "Failed to create .keep in ${D}${x}"
 *  The die message:
 *   Failed to create .keep in /var/tmp/portage/sys-apps/portage-2.1.3.19/image//etc/portage
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.
 *

 * Messages for package sys-apps/portage-2.1.3.19:

 *
 * ERROR: sys-apps/portage-2.1.3.19 failed.
 * Call stack:
 *                 ebuild.sh, line 1701:  Called dyn_install
 *                 ebuild.sh, line 1138:  Called qa_call 'src_install'
 *                 ebuild.sh, line   44:  Called src_install
 *   portage-2.1.3.19.ebuild, line  193:  Called keepdir '/etc/portage'
 *                 ebuild.sh, line  431:  Called die
 * The specific snippet of code:
 *                      touch "${D}${x}/.keep_${CATEGORY}_${PN}-${SLOT}" || \
 *                              die "Failed to create .keep in ${D}${x}"
 *  The die message:
 *   Failed to create .keep in /var/tmp/portage/sys-apps/portage-2.1.3.19/image//etc/portage
 *
 * If you need support, post the topmost build error, and the call stack if relevant.
 * A complete build log is located at '/var/tmp/portage/sys-apps/portage-2.1.3.19/temp/build.log'.

_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
djinnZ
Advocate
Advocate


Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.

PostPosted: Fri Feb 01, 2008 1:53 pm    Post subject: Reply with quote

forse è il caso di fare un update manuale da pacchetto binario ma non so se suggerirti o meno una soluzione così estrema (e non del tutto pulita oltre che difficile).
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt:wink:
mala tempora currunt...mater stultorum semper pregna est :evil:
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist :wink:
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 1:59 pm    Post subject: Reply with quote

djinnZ wrote:
forse è il caso di fare un update manuale da pacchetto binario ma non so se suggerirti o meno una soluzione così estrema (e non del tutto pulita oltre che difficile).
Suggerisci, suggerisci che c'ho preso gusto a sputtanare il sistema.
Da notare: ho finito di emergere gnome ieri alle 16...poi ho avuto la malsana idea di aggiornare gcc e rendere tutto il più aggiornato possibile.
Bene: NON FATELO MAI!
A meno che non vogliate battere il record di vita minimo di sistemi appena emersi.

Allora...da dove comincio?
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4670
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Fri Feb 01, 2008 2:05 pm    Post subject: Reply with quote

nell'ultima puntata manca il comando dodir.

è un file (bash - di caratteri) del pacchetto portage.
prova a sistemarlo manualmente.

e magari, controlla e/o ripeti il ripristino di portage.
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 2:39 pm    Post subject: Reply with quote

cloc3 wrote:
...manca il comando dodir...prova a sistemarlo manualmente.

Ok, dall'interno del pacchetto ho dato
Code:
candasus bin # cp -v dodir /usr/lib64/portage/bin/   
`dodir' -> `/usr/lib64/portage/bin/dodir'
e dopo la compilazione di portage è andata a buon fine...non ho capito perchè ma sembrava mancare solo quello.
Alla fine della compilazione, portage mi ha dato un Warning, anche se non credo sia fondamentale:
Code:
 * Messages for package sys-apps/portage-2.1.3.19:

 * This package will overwrite one or more files that may belong to other
 * packages (see list below). Add "collision-protect" to FEATURES in
 * make.conf if you would like the merge to abort in cases like this. You
 * can use a command such as `portageq owners / <filename>` to identify
 * the installed package that owns a file. If portageq reports that only
 * one package owns a file then do NOT file a bug report. A bug report is
 * only useful if it identifies at least two or more packages that are
 * known to install the same file(s). If a collision occurs and you can
 * not explain where the file came from then you should simply ignore the
 * collision since there is not enough information to determine if a real
 * problem exists. Please do NOT file a bug report at
 * http://bugs.gentoo.org unless you report exactly which two packages
 * install the same file(s). Once again, please do NOT file a bug report
 * unless you have completely understood the above message.
 *
 * Detected file collision(s):
 *
 *      /usr/lib64/portage/bin/dodir

Ora sono riuscito a lanciare
Code:
FEATURES="-sandbox" emerge -vuNDe system
Ho dovuto usare FEATURE="-sandbox" se no non reinstallava il primo pacchetto (ancora portage...).
Strano perchè prima avevo dato un semplice emerge portage...adesso sta compilando: vediamo se arriva fino in fondo.
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Fri Feb 01, 2008 8:17 pm    Post subject: Reply with quote

Sono basito: è arrivato fino in fondo senza fare una sola storia... 8O
Bene. Alla fine di questa super compilazione, portage mi ha dato un po' di messaggi:
Code:
 Messages for package sys-apps/portage-2.1.3.19:

 *
 * FEATURES="userfetch" is now enabled by default. Depending on your ${DISTDIR}
 * permissions, this may result in Permission Denied errors. If you would like
 * to fetch with superuser privileges, add FEATURES="-userfetch" to make.conf.
 *
 * The world file now supports slot atoms such as 'sys-devel/gcc:3.4'. In some
 * cases, emerge --depclean may remove slots that it would not have removed
 * in the past. The emerge --noreplace command can be used to add an atom to
 * the world file and prevent matching packages from being removed.  A slot
 * atom will be recorded in the world file for any atom that is precise enough
 * to identify a specific slot.
 *
 * For help with using portage please consult the Gentoo Handbook
 * at http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=3
 *

 * Messages for package dev-libs/expat-2.0.1:

 * Please note that the soname of the library changed!
 * If you are upgrading from a previous version you need
 * to fix dynamic linking inconsistencies by executing:
 * revdep-rebuild -X --library libexpat.so.0

 * Messages for package sys-apps/sandbox-1.2.18.1-r2:

 * If configure fails with a 'cannot run C compiled programs' error, try this:
 * FEATURES=-sandbox emerge sandbox

 * Messages for package sys-devel/binutils-2.18-r1:

 * Sorry, but binutils does not support the LINGUAs: it

 * Messages for package net-misc/rsync-2.6.9-r5:

 * The rsyncd.conf file has been moved for you to /etc/rsyncd.conf
 * Please make sure you do NOT disable the rsync server running
 * in a chroot.  Please check /etc/rsyncd.conf and make sure
 * it says: use chroot = yes

 * Messages for package sys-apps/coreutils-6.9-r1:

 * Make sure you run 'hash -r' in your active shells.

 * Messages for package app-editors/nano-2.0.6:

 * More helpful info about nano, visit the GDP page:
 * http://www.gentoo.org/doc/en/nano-basics-guide.xml

 * Messages for package sys-apps/man-1.6e-r3:

 * You have multiple makewhatis cron files installed.
 * You might want to delete all but one of these:
 * //etc/cron.daily/makewhatis //etc/cron.weekly/makewhatis

 * Messages for package sys-libs/com_err-1.40.3:

 * PLEASE PLEASE take note of this
 * Please make *sure* to run revdep-rebuild now
 * Certain things on your system may have linked against a
 * different version of com_err -- those things need to be
 * recompiled.  Sorry for the inconvenience

 * Messages for package dev-lang/python-2.4.4-r6:

 *
 * If you have just upgraded from an older version of python you
 * will need to run:
 *
 * /usr/sbin/python-updater
 *
 * This will automatically rebuild all the python dependent modules
 * to run with python-2.4.
 *
 * Your original Python is still installed and can be accessed via
 * /usr/bin/python2.x.
 *

 * Messages for package sys-apps/shadow-4.0.18.1-r1:

 * Running 'grpck' returned errors.  Please run it by hand, and then
 * run 'grpconv' afterwards!

 * Messages for package sys-apps/busybox-1.8.2:

 * Could not locate user configfile, so we will save a default one
 * Your configuration for sys-apps/busybox-1.8.2 has been saved in
 * /etc/portage/savedconfig/sys-apps/busybox-1.8.2 for your editing pleasure.
 * You can edit these files by hand and remerge this package with
 * USE=savedconfig to customise the configuration.
 * You can rename this file/directory to one of the following for
 * its configuration to apply to multiple versions:
 * ${PORTAGE_CONFIGROOT}/etc/portage/savedconfig/
 * [${CTARGET}|${CHOST}|""]/${CATEGORY}/[${PF}|${P}|${PN}]

 * Messages for package net-misc/openssh-4.7_p1-r1:

 * Remember to merge your config files in /etc/ssh/ and then
 * restart sshd: '/etc/init.d/sshd restart'.
 * Please be aware users need a valid shell in /etc/passwd
 * in order to be allowed to login.

 * Messages for package sys-devel/gcc-4.1.2:

 * If you have issues with packages unable to locate libstdc++.la,
 * then try running 'fix_libtool_files.sh' on the old gcc versions.
 * Regenerating GNU info directory index...
 * Processed 147 info files.
 * IMPORTANT: 34 config files in '/etc' need updating.
 * See the CONFIGURATION FILES section of the emerge
 * man page to learn how to update config files.
Ho seguito tutti i consigli, dato due volte revdep-rebuild, fatto etc-update ed ora mi sembra sia tutto a posto.
Ho provato a dare un
Code:
emerge -euNpvD world
ma mi ripropone di reinstallare tutto il sistema...non ci sono nè pacchetti nuovi nè upgrades da fare.
Per questo io lascerei stare, anche se la guida di aggiornamento di gcc dice di dare anche quel comando.

Voi che ne dite?
E soprattutto: qualcuno mi spiega che differenza c'è tra un
Code:
emerge -vueND system
e un
Code:
emerge -vueND world
?
Nella documentazione che ho letto per risolvere questo malippo, non è spiegato...
Grazie a tutti come sempre :D
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4670
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Fri Feb 01, 2008 8:28 pm    Post subject: Reply with quote

canduc17 wrote:

Ho provato a dare un
Code:
emerge -euNpvD world
ma mi ripropone di reinstallare tutto il sistema

man emerge wrote:

--emptytree (-e)
Reinstalls all world packages and their dependencies to the current USE specifications while differing from the installed set of packages as
little as possible. You should run with --pretend first to make sure the result is what you expect.

bene. oggi è il secondo caso disperato risolto.

temo che serva un aggiornamento del system manager.. sarà mica che ti propone di reinstallare il sistema perché hai chiamato il comando che reinstalla il sistema?

su,su. vai a nanna, che sei stanco :).
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Sat Feb 02, 2008 2:42 pm    Post subject: Reply with quote

Ok.
Visto che adesso sono riposato, mi potete dire che cambia se tolgo il flag -e?
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Tigerwalk
Guru
Guru


Joined: 15 May 2007
Posts: 475
Location: Napoli

PostPosted: Sat Feb 02, 2008 2:56 pm    Post subject: Reply with quote

canduc17 wrote:
Ok.
Visto che adesso sono riposato, mi potete dire che cambia se tolgo il flag -e?

Mi pare che la flag -e ricompili tutti i pacchetti installati sul sistema e non solo quelli da aggiornare, viene di solito usata per ricompilare un sistema dopo ad es. un aggiornamento importante per evitare problemi di incongruenza dovute alla compilazione dei pacchetti e del kernel con un diverso compilatore o cambi di CFLAGS etc.
_________________
Linux user N°447789
Carpe diem (quam minimum credula postero) -Orazio (I,11)
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Sat Feb 02, 2008 3:09 pm    Post subject: Reply with quote

Serve per "ingannare" Portage e fargli credere che non ci sia NESSUN pacchetto installato, ragione per cui emerge vorrà reinstallarli TUTTI, comprese dipendenze e pacchetti di sistema.
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
canduc17
l33t
l33t


Joined: 11 Oct 2005
Posts: 795
Location: Ferrara, Italy

PostPosted: Sat Feb 02, 2008 3:14 pm    Post subject: Reply with quote

Non ci capiamo: scusate se insisto ma voglio dissipare i miei dubbi.
Che differenza c'è tra
emerge world
ed
emerge system
?

Gli oggetti della domanda sono world e system, non le loro flag.
_________________
A cow enters a supermarket, does an handstand and dies. (Public toilet graffito)
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Sat Feb 02, 2008 3:21 pm    Post subject: Reply with quote

Pardon, il post di Tigerwalk mi aveva fuorviato :oops: .


  • world: tutti i pacchetti installati volontariamente (ovvero tramite un emerge <pacchetto>), il cui elenco lo trovi nel file /var/lib/portage/world
  • system: è un metapacchetto, il cui contenuto è specificato nel profilo che stai utilizzando, ed include tutti i pacchetti "di sistema", ovvero quelli che devono essere necessariamente installati, pena un malfunzionamento del sistema stesso.

Ovviamente system è incluso in world, in quanto uno stage3 di Gentoo include già tutti i pacchetti di system.
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
Onip
Advocate
Advocate


Joined: 02 Sep 2004
Posts: 2912
Location: Parma (Italy)

PostPosted: Sat Feb 02, 2008 3:24 pm    Post subject: Reply with quote

'world' considera come pacchetti da esaminare (ad esempio per un aggiornamento ) quelli contenuti in /var/lib/portage/world che, se gentoo è stata mantenuta correttamente, corrispondono ai pacchetti che tu hai esplicitamente scelto di installare. Quindi, ad esempio, se emergi gimp allora gimp andrà in world ma gtk+ (che è una dipendenza) no. Inoltre (credo) è considerato fare parte del world anche il 'meta-pacchetto' system.

'system' sono i pacchetti "base" del sistema che servono per un corretto funzionamento di gentoo, es python, portage, gcc... E' deciso dai developers.
_________________
Linux Registered User n. 373835

Titus Lucretius Carus, De Rerum Natura - Tantum religio potuit suadere malorum
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum