| View previous topic :: View next topic |
| Author |
Message |
radek-s
Apprentice
Joined: 25 Mar 2006
Posts: 239
|
 Posted: Wed Nov 28, 2007 7:56 pm Post subject: znikające pliki z dysku: padniety dysk? |
 |
|
Witam!
Zdarzyło mi się to już dwa razy w przeciągu tygodnia: raz pliki (iptablesy) się nagle zepsuły i przestały działac, mimo ze nic przy tym nie dłubałem, teraz zniknął jeden plik po restarcie z dysku...czyja to może być wina? dysku czy komputera??
pozdrawiam i dzieki z góry za info! |
|
| Back to top |
|
 |
Dagger
Retired Dev
Joined: 11 Jun 2003
Posts: 765
Location: UK
|
| Posted: Wed Nov 28, 2007 10:36 pm Post subject: |
|
|
przyczyn moze byc wiele
co Ci smartctl podpowiada?
_________________
95% of all computer errors occur between chair and keyboard (TM)
Join the FSF as an Associate Member!
Post under CC license. |
|
| Back to top |
|
|
radek-s
Apprentice
Joined: 25 Mar 2006
Posts: 239
|
| Posted: Thu Nov 29, 2007 2:53 am Post subject: |
|
|
| Dagger wrote: | przyczyn moze byc wiele
co Ci smartctl podpowiada? |
| Code: | # smartctl /dev/hda -a
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3250620A
Serial Number: 9QE0YDPB
Firmware Version: 3.AAE
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Nov 29 03:34:13 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 74) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 096 006 Pre-fail Always - 226018471
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 18
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 090 060 030 Pre-fail Always - 980965978
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 661
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 22
187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Temperature_Celsius 0x0022 064 056 045 Old_age Always - 639434788
194 Temperature_Celsius 0x0022 036 044 000 Old_age Always - 36 (Lifetime Min/Max 0/23)
195 Hardware_ECC_Recovered 0x001a 060 057 000 Old_age Always - 173704702
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. |
|
|
| Back to top |
|
|
|
Polskie forum (Polish)
