| View previous topic :: View next topic |
| Author |
Message |
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
 Posted: Sun Jun 22, 2003 11:23 am Post subject: Fluxbox hangs at startx |
 |
|
Hi
Im new here (and new to Gentoo), so this may be at newbie question.
I ´ve just installed fluxbox (emerge fluxbox)
I ´ve also installed fluxspace (emerge fluxspace), iDesk (emerge iDesk) and fluxconf (emerge fluxconf)
Then I type "startx" X startup, but the screen is black 
If I wait 2 minutes the fluxbox screen appear, but i cant use my mouse and my keyboard.
(Ctrl + alt + backspace doesnt work)
i have tryed to "emerge unmerge fluxbox", and then again "emerge fluxbox" - but it still hangs
EDIT: It says "hostname: unknown hostname" before fluxbox starts
_________________
Encrypt, lock up everything and duct tape the rest
Last edited by GentooBox on Sun Jun 22, 2003 11:48 am; edited 1 time in total |
|
| Back to top |
|
 |
mr_neutron
Tux's lil' helper
Joined: 05 Jan 2003
Posts: 124
Location: Germany
|
| Posted: Sun Jun 22, 2003 11:32 am Post subject: |
|
|
No idea, but posting your ~/.xinitrc would certainly be helpful.
Have you checked in /var/log/XFree86.0.log for error messages? |
|
| Back to top |
|
|
ricril
n00b
Joined: 05 Mar 2003
Posts: 26
Location: New York
|
| Posted: Mon Jun 23, 2003 11:32 am Post subject: |
|
|
Hi,
I have the exact same problem, but with gnome/metacity.
When I startx, I have a black screen and I can't open a new terminal or Ctrl-Alt-Supr. I have no other choice than roughly close the computer.
I really don't know what to do 
here is the /var/log/XFree86.0.log, and then the XF86Config files:
| Quote: |
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gentoo-r5 i686 [ELF]
Build Date: 18 June 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jun 23 10:05:26 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "Monitor 0"
(**) | |-->Device "NVIDIA GeForce2"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "Keyboard 0"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "dell101"
(**) XKB: model: "dell101"
(**) Option "XkbLayout" "us_intl"
(**) XKB: layout: "us_intl"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/truetype/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,244c card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244a card 8086,4541 rev 03 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 03 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0112 card 1028,00e6 rev b2 class 03,00,00 hdr 00
(II) PCI: 02:03:0: chip 125d,1998 card 1028,00e6 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:06:0: chip 1668,0100 card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 02:0f:0: chip 104c,ac42 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:1: chip 104c,ac42 card 4800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:0f:2: chip 104c,8027 card 1028,00e6 rev 00 class 0c,00,10 hdr 80
(II) PCI: 08:04:0: chip 8086,1229 card 1668,1100 rev 08 class 02,00,00 hdr 00
(II) PCI: 08:08:0: chip 11c1,0448 card 1668,2400 rev 01 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,13), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[8] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[9] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[10] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[11] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf2000000 - 0xfbffffff (0xa000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (2:6:0), (2,8, , BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 8 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
(II) Bus 8 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 9: bridge is at (2:15:0), (2,9,12), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 13: bridge is at (2:15:1), (2,13,16), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 Go] rev 178, Mem @ 0xfc000000/24, 0xe0000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[1] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[2] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[3] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[4] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[5] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[6] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[10] -1 0 0x0000ecb8 - 0x0000ecbf (0x8) IX[B]
[11] -1 0 0x0000ecc0 - 0x0000ecff (0x40) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[14] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[1] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[2] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[3] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[4] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[5] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[6] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[10] -1 0 0x0000ecb8 - 0x0000ecbf (0x8) IX[B]
[11] -1 0 0x0000ecc0 - 0x0000ecff (0x40) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[13] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[14] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[6] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[7] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[8] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[9] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[10] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[11] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[17] -1 0 0x0000ecb8 - 0x0000ecbf (0x8) IX[B]
[18] -1 0 0x0000ecc0 - 0x0000ecff (0x40) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[21] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4363
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4363
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-4363 Sat Apr 19 17:49:42 PDT 2003
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[6] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[7] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[8] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[9] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[10] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[11] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[17] -1 0 0x0000ecb8 - 0x0000ecbf (0x8) IX[B]
[18] -1 0 0x0000ecc0 - 0x0000ecff (0x40) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[20] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[21] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[6] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[7] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[8] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[9] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[10] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[11] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[20] -1 0 0x0000ecb8 - 0x0000ecbf (0x8) IX[B]
[21] -1 0 0x0000ecc0 - 0x0000ecff (0x40) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[23] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[24] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "2"
(**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
(**) NVIDIA(0): Option "IgnoreDisplayDevices" "CRT,TV"
(**) NVIDIA(0): Use of AGPGART requested
(**) NVIDIA(0): ConnectedMonitor string: "DFP"
(--) NVIDIA(0): Linear framebuffer at 0xE0000000
(--) NVIDIA(0): MMIO registers at 0xFC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce2 Go
(--) NVIDIA(0): VideoBIOS: 03.11.01.13.12
(--) NVIDIA(0): VideoRAM: 16384 kBytes
(II) NVIDIA(0): Using ConnectedMonitor string "DFP-0"
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 32 bpp: 300 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) NVIDIA(0): Monitor 0: Using hsync range of 31.50-90.00 kHz
(II) NVIDIA(0): Monitor 0: Using vrefresh value of 60.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 300.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x432" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x512" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(WW) (1600x1200,Monitor 0) mode clock 162MHz exceeds DDC maximum 120MHz
(II) NVIDIA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(WW) (1792x1344,Monitor 0) mode clock 204.8MHz exceeds DDC maximum 120MHz
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(WW) (1856x1392,Monitor 0) mode clock 218.3MHz exceeds DDC maximum 120MHz
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(WW) (1920x1440,Monitor 0) mode clock 234MHz exceeds DDC maximum 120MHz
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "416x312" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(WW) (1400x1050,Monitor 0) mode clock 122MHz exceeds DDC maximum 120MHz
(II) NVIDIA(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "700x525" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "960x720" (height 1440 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1050)
(WW) NVIDIA(0): Not using mode "928x696" (height 1392 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1050)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1050)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 1050)
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1400 x 1050
(--) NVIDIA(0): Display dimensions: (300, 230) mm
(--) NVIDIA(0): DPI set to (118, 115)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[1] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf8ffec00 - 0xf8ffecff (0x100) MX[B]
[8] -1 0 0xf8e00000 - 0xf8efffff (0x100000) MX[B]
[9] -1 0 0xf8fff000 - 0xf8ffffff (0x1000) MX[B]
[10] -1 0 0xf6ff8000 - 0xf6ffbfff (0x4000) MX[B]
[11] -1 0 0xf6ffd800 - 0xf6ffdfff (0x800) MX[B]
[12] -1 0 0xf6ffe000 - 0xf6ffffff (0x2000) MX[B]
[13] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[22] -1 0 0x0000ecb8 - 0x0000ecbf (0x8) IX[B]
[23] -1 0 0x0000ecc0 - 0x0000ecff (0x40) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[25] -1 0 0x0000bce0 - 0x0000bcff (0x20) IX[B]
[26] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1400x1050"
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) [GLX]: Initializing GLX extension
(**) Option "Protocol" "Auto"
(**) Touchpad: Protocol: "Auto"
(**) Option "CorePointer"
(**) Touchpad: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Option "Emulate3Buttons"
(**) Touchpad: Emulate3Buttons, Emulate3Timeout: 50
(==) Touchpad: Buttons: 3
(II) Keyboard "Keyboard 0" handled by legacy driver
(II) XINPUT: Adding extended input device "Touchpad" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Kernel Input Handler" (type: Other)
(--) Touchpad: PnP-detected protocol: "PS/2"
(II) Touchpad: ps2EnableDataReporting: succeeded
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
|
XF86Config:
| Quote: | # **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
Load "ddc"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
Load "extmod"
Load "record"
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"
Load "fb"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/truetype/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard 0"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "250 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbVariant" "nodeadkey"
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "dell101"
Option "XkbLayout" "us_intl"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Touchpad"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor 0"
VendorName "Dell"
ModelName "i8000 SXGA Display"
HorizSync 31.5-90
VertRefresh 60
Option "DPMS"
# Modeline "1400x1050" 108.000 1400 1448 1462 1688 1050 1050 1053 1066
# Modeline "1280x1024" 108.000 1400 1448 1462 1688 1050 1050 1053 1066
# Modeline "1024x768" 65.000 1024 1048 1065 1344 768 770 776 806
### DisplaySize 305 230
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
#EndSection
# Device configured by xf86config:
Section "Device"
Identifier "NVIDIA GeForce2"
VendorName "nvidia"
BoardName "GeForce2 Go"
Driver "nvidia"
Option "NvAgp" "2"
BusID "PCI:1:0:0"
Option "IgnoreDisplayDevices" "CRT,TV"
Option "ConnectedMonitor" "DFP"
# VideoRam 16384
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 0"
Device "NVIDIA GeForce2"
Monitor "Monitor 0"
DefaultColorDepth 24
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1280x960" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1400x1050" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 8
Modes "1400x1050" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 0" 0 0
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard 0" "CoreKeyboard"
EndSection
#Section "DRI"
# Mode 0666
#EndSection
|
Thanks for your help!
_________________
Ricril |
|
| Back to top |
|
|
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
| Posted: Mon Jun 23, 2003 1:24 pm Post subject: |
|
|
I am not the only one with that problem:
http://www.justlinux.com/forum/showthread.php?threadid=104842
edit: i cant post my log and XF86config, i dont know how. (i´m sitting on my Windows XP now)
_________________
Encrypt, lock up everything and duct tape the rest |
|
| Back to top |
|
|
ricril
n00b
Joined: 05 Mar 2003
Posts: 26
Location: New York
|
| Posted: Mon Jun 23, 2003 2:36 pm Post subject: |
|
|
It doesn't work, but it seems interesting.
I don't get the black screen anymore but the following error message on the screen (which is the /var/log/XFree86.à.log):
| Quote: | XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gentoo-r5 i686 [ELF]
Build Date: 18 June 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jun 23 13:27:19 2003
(==) Using config file: "/etc/X11/XF86Config"
Parse error on line 162 of section InputDevice in file /etc/X11/XF86Config
This section must have an Identifier line.
(EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
|
Any idea?
_________________
Ricril |
|
| Back to top |
|
|
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
| Posted: Mon Jun 23, 2003 2:47 pm Post subject: |
|
|
I just tryed it myself, i got the same error.
if i add the mouse again then xfree just freeze again.
right now i´m removing all xfree files and folders. then i´m going to emerge xfree again. ("emerge unmerge xfree" does not remove xf86config and so on)
_________________
Encrypt, lock up everything and duct tape the rest |
|
| Back to top |
|
|
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
| Posted: Mon Jun 23, 2003 3:25 pm Post subject: |
|
|
BTW: What version do you have ? (xfree)
stable ? unstable ?
_________________
Encrypt, lock up everything and duct tape the rest |
|
| Back to top |
|
|
ricril
n00b
Joined: 05 Mar 2003
Posts: 26
Location: New York
|
| Posted: Mon Jun 23, 2003 3:34 pm Post subject: |
|
|
Stable:
x11-base/xfree-4.3.0-r2
_________________
Ricril |
|
| Back to top |
|
|
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
| Posted: Mon Jun 23, 2003 4:25 pm Post subject: |
|
|
Okay..
I am running with Xfree86 4.3.0rc4
right now i´m downloading xfree again.
i post if it works. 
_________________
Encrypt, lock up everything and duct tape the rest |
|
| Back to top |
|
|
ricril
n00b
Joined: 05 Mar 2003
Posts: 26
Location: New York
|
| Posted: Tue Jun 24, 2003 11:44 am Post subject: |
|
|
Guys,
Some improvement, or at least new behaviour:
I unmerge the nvidia drivers and got the drivers from http://www.nvidia.com.
Instead of the black screen, startx crashes, and I got the following message:
| Quote: | (EE) Problem parsing the config file
(EE) Error from xf86HandleConfigFile()
Fatal server error:
no screen found
bla, bla..
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests -0 known processed) with 0 event remainig |
If I uncoment the mouse section (to get it back), I have the nvidia logo and then shity lines/colors with the mouse pointer (but can't move it) 
Any insight?
_________________
Ricril |
|
| Back to top |
|
|
ricril
n00b
Joined: 05 Mar 2003
Posts: 26
Location: New York
|
| Posted: Tue Jun 24, 2003 11:45 am Post subject: |
|
|
Oh, by the way
it is still impossible to Ctrl-Alt-Back or run a different terminal
_________________
Ricril |
|
| Back to top |
|
|
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
| Posted: Tue Jun 24, 2003 3:20 pm Post subject: |
|
|
i got it to work again:
i´ve did this:
| Code: |
#updatedb
#locate X11
#locate X11R
#locate xfree
#locate XF
#locate XFree
and i removed all files that have something to do with xfree
then i:
#emerge xfree
then it was finished i typed: startx
and now it works :)
|
hehe... it was the failsafe way to get it to work again.
_________________
Encrypt, lock up everything and duct tape the rest |
|
| Back to top |
|
|
ricril
n00b
Joined: 05 Mar 2003
Posts: 26
Location: New York
|
| Posted: Wed Jun 25, 2003 6:40 am Post subject: |
|
|
emerge unmerge xfree is not supposed to remove all these files?
Then precisely what should I remove?
All directories, subdirectories and files in:
X11
X11R
xfree
XF
XFree
or just a few of them?
Because I did emerge unmerge xfree and emerge xfree again and it doesn't work
Thanks
ps: I'll get that dam' X to work! 
_________________
Ricril |
|
| Back to top |
|
|
GentooBox
Veteran
Joined: 22 Jun 2003
Posts: 1168
Location: Denmark
|
| Posted: Fri Jun 27, 2003 6:53 am Post subject: |
|
|
I got some great news for you.
i fall (not really) over this tread:
https://forums.gentoo.org/viewtopic.php?t=57177&highlight=qpkg
have a look at StuBear´s answer:
| Quote: |
Posted: Sat May 31, 2003 3:55 am Post subject:
--------------------------------------------------------------------------------
To see what kde and xfree stuff you have installed try Code:
qpkg -I -g kde
and Code:
qpkg -I -g x11
This will list all installed (-I) packages in groups with kde and x11 in their name (x11-wm, x11-misc etc).
If you are happy with getting rid of all these then Code:
qpkg -I -nc -g kde | xargs emerge unmerge -p
to make sure that nothing surprising is being unmerged, then remove the -p to unmerge stuff.
Do it again with Code:
qpkg -I -nc -g kde | xargs emerge unmerge -p
.
This will remove almost everything related to kde and xfree, although it will miss stuff in net-mail, net-www etc that may be kde or X apps
|
Just do it with Xfree.. (X11) and then it should work
The way i did it, was the hard way
_________________
Encrypt, lock up everything and duct tape the rest |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
