Gentoo Forums :: View topic - NEW ati-drivers [8.42.3]

NEW ati-drivers [8.42.3]

View unanswered posts
View posts from last 24 hours

Goto page 1, 2, 3, 4, 5, 6 Next

Gentoo Forums Forum Index

Unsupported Software

View previous topic :: View next topic

Author

Message

rmh3093
Advocate

Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY

Posted: Tue Oct 23, 2007 10:30 pm Post subject: NEW ati-drivers [8.42.3]

Its out!!!!!!!!!!!!!!!!!! EDIT: just rename the 8.41.7 ebuild and patches to 8.42.3 and you will be all set! _________________ Do not meddle in the affairs of wizards, for they are subtle and quick to anger.

nine01a
n00b
n00b

Joined: 09 Aug 2005
Posts: 24
Location: Houston, Texas

Posted: Tue Oct 23, 2007 10:56 pm Post subject:

http://www.phoronix.com/scan.php?page=news_item&px=NjE0Ng Supposedly supports AIGLX, finally =) We'll see. edit: I installed them by just doing `sh ati-*` and it felt really dirty. On a better note, have the best fps I've ever achieved with my crappy x200 mobility. _________________ --name="Zach"

hulmeman
Apprentice

Joined: 02 Jul 2002
Posts: 184
Location: Duchy of Lancaster, England.

Posted: Tue Oct 23, 2007 11:49 pm Post subject:

Bugger!

Quote:

While this driver quite promptly supports X.Org 7.3 / X server 1.4, it does not contain Linux 2.6.23 kernel support. The Linux 2.6.23 support isn't found in fglrx 8.42.3 due to issues with x86_64 support. However, we do expect that fglrx 8.43 will contain the Linux 2.6.23 kernel support.

kernelOfTruth
Watchman

Joined: 20 Dec 2005
Posts: 6111
Location: Vienna, Austria; Germany; hello world :)

Posted: Tue Oct 23, 2007 11:51 pm Post subject:

hulmeman wrote:

Bugger!

Quote:

in phoronix' forums they wrote that you just have to rename the ebuild & 2.6.23 patches then it should work :wink:

https://bugs.gentoo.org/show_bug.cgi?id=196820
_________________
https://github.com/kernelOfTruth/ZFS-for-SystemRescueCD/tree/ZFS-for-SysRescCD-4.9.0
https://github.com/kernelOfTruth/pulseaudio-equalizer-ladspa

Hardcore Gentoo Linux user since 2004

OddFox
Apprentice

Joined: 28 Nov 2002
Posts: 270
Location: Spokane, WA

Posted: Wed Oct 24, 2007 1:39 am Post subject:

kernelOfTruth wrote:

hulmeman wrote:

Bugger!

Quote:

in phoronix' forums they wrote that you just have to rename the ebuild & 2.6.23 patches then it should work :wink:

https://bugs.gentoo.org/show_bug.cgi?id=196820

I'll have to give it a whirl then, but if 2.6.23 truly is out of the question for this driver release I don't think I'll be shedding any tears reverting to 2.6.22 for the time being. Hopefully these drivers give me more reliable 3D than the open-source radeon driver on my X800GTO. Afraid to run Compiz Fusion on the radeon driver because I hate coming back to a frozen desktop that I have to hope I can ssh into.

On a side note, am I finally going to be able to stop moaning and groaning about how I wish I had an NVidia card? Let's hope so.

_________________
Now the rainy season reminds me of Maria
The way she danced, the color of her hair
Now I'm locked inside a stall at the cantina
Eating the bananas and the cocaine off the mirror
Looking for a ticket to take me away from here

rmh3093
Advocate

Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY

Posted: Wed Oct 24, 2007 2:42 am Post subject:

This driver works fine on Xorg 1.4 and 2.6.23.... im currently running 8.43.2 .... the only problem is that compiz dont work cause of an libGL.so issue.... even though glxgears runs like butter and with much higher fps _________________ Do not meddle in the affairs of wizards, for they are subtle and quick to anger.

hulmeman
Apprentice

Joined: 02 Jul 2002
Posts: 184
Location: Duchy of Lancaster, England.

Posted: Wed Oct 24, 2007 3:03 am Post subject:

I've installed ati-drivers-8.42.3, but I'm still getting the block on xorg-server-1.4:

Code:

[blocks B ] x11-drivers/ati-drivers (is blocking x11-base/xorg-server-1.4-r2)

Any ideas how to unblock?

rmh3093
Advocate

Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY

Posted: Wed Oct 24, 2007 3:27 am Post subject:

hulmeman wrote:

I've installed ati-drivers-8.42.3, but I'm still getting the block on xorg-server-1.4:

Code:

[blocks B ] x11-drivers/ati-drivers (is blocking x11-base/xorg-server-1.4-r2)

Any ideas how to unblock?

oh yeah... ati-drivers is blocked in xorg-server-1.4, just edit the xorg-server ebuild and remove the line where is says !ati-drivers

_________________
Do not meddle in the affairs of wizards, for they are subtle and quick to anger.

nine01a
n00b
n00b

Joined: 09 Aug 2005
Posts: 24
Location: Houston, Texas

Posted: Wed Oct 24, 2007 4:52 am Post subject:

I just started experiencing artifacts on about a 100x100-pixel square in the bottom-right corner of my display. I would show a screen but. .it doesn't show up on a screenshot. No idea if this has anything to do with the new ATi driver or not. _________________ --name="Zach"

bunder
Bodhisattva

Joined: 10 Apr 2004
Posts: 5934

Posted: Wed Oct 24, 2007 4:54 am Post subject:

nine01a wrote:

I just started experiencing artifacts on about a 100x100-pixel square in the bottom-right corner of my display. I would show a screen but. .it doesn't show up on a screenshot. No idea if this has anything to do with the new ATi driver or not.

picture perhaps? if it doesn't show up on the screenshot, its probably the driver and/or its interaction with your card.
_________________

Neddyseagoon wrote:

The problem with leaving is that you can only do it once and it reduces your influence.

banned from #gentoo since sept 2017

nine01a
n00b
n00b

Joined: 09 Aug 2005
Posts: 24
Location: Houston, Texas

Posted: Wed Oct 24, 2007 5:04 am Post subject:

http://www.shsu.edu/~zan001/ATi_artifacts.jpg Kinda blurry since it's from my cell phone, in the dark. Don't ask why. (The wife is asleep. .lol) _________________ --name="Zach"

GoingDown
Tux's lil' helper

Joined: 13 Jan 2004
Posts: 117
Location: Finland

Posted: Wed Oct 24, 2007 6:00 am Post subject:

nine01a wrote:

http://www.shsu.edu/~zan001/ATi_artifacts.jpg

Kinda blurry since it's from my cell phone, in the dark. Don't ask why. (The wife is asleep. .lol)

That seems to be place where ATI unofficial drivers are having ATI logo. Did you remeber to update /etc/ati/signature file (etc-update or dispatch-conf)?

Growlizing
Tux's lil' helper

Joined: 25 Jul 2005
Posts: 94

Posted: Wed Oct 24, 2007 8:02 am Post subject:

OddFox wrote:

On a side note, am I finally going to be able to stop moaning and groaning about how I wish I had an NVidia card? Let's hope so.

Let's hope so indeed.

_________________
Is this where I write something clever?

dopt
n00b
n00b

Joined: 06 Mar 2005
Posts: 7
Location: Lithuania

Posted: Wed Oct 24, 2007 10:34 am Post subject:

compiz runs here (xpress 200m), but slow scaling and scrolling makes it unusable. can't remember if i had theses issues with xgl when i tried it last year or so... and yes – no xvideo.

Growlizing
Tux's lil' helper

Joined: 25 Jul 2005
Posts: 94

Posted: Wed Oct 24, 2007 11:05 am Post subject:

Scaling was slow with my Xgl too, but scrolling was fine as far as I can remember. Will try the new driver soon. _________________ Is this where I write something clever?

MoinMan
Tux's lil' helper

Joined: 07 Jan 2007
Posts: 78
Location: Liechtenstein

Posted: Wed Oct 24, 2007 11:28 am Post subject:

Xvideo can be enabled with

Code:

Option "TexturedVideo" "true"

in xorg.conf Device Section
seems to work fine in X1600M

Compiz-fusion doesn't work

compiz-start:

Code:

X Error of failed request: GLXBadContext
Major opcode of failed request: 142 (GLX)
Minor opcode of failed request: 5 (X_GLXMakeCurrent)
Serial number of failed request: 16
Current serial number in output stream: 16
...
compiz(core) - Fatal: GLX_EXT_texture_from_pixmap is missing

dopt
n00b
n00b

Joined: 06 Mar 2005
Posts: 7
Location: Lithuania

Posted: Wed Oct 24, 2007 12:20 pm Post subject:

Growlizing wrote:

Scaling was slow with my Xgl too, but scrolling was fine as far as I can remember. Will try the new driver soon.

Xorg's cpu usage jumps near to 100% while scrolling firefox or openoffice, or else: evidence
and as for XVideo:

Code:

(WW) fglrx(0): Textured Video is currently not supported on IGP hardware.

MoinMan
Tux's lil' helper

Joined: 07 Jan 2007
Posts: 78
Location: Liechtenstein

Posted: Wed Oct 24, 2007 12:32 pm Post subject:

slow scrolling was always an issue with fglrx for me, however Option "XAANoOffscreenPixmaps" helped other OverlayOptions: Option "VideoOverlay" "on" Option "OpenGLOverlay" "on"

Dottout
l33t
l33t

Joined: 07 Mar 2006
Posts: 882

Posted: Wed Oct 24, 2007 1:50 pm Post subject:

compiz fails:

Code:

compiz --replace
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

I tried to put fglrx in whitelist, edit /etc/xdg/compiz/compiz-manager, LIBGL_ALWAYS_INDIRECT=1 compiz --replace and both xorg-server 1.3 and 1.4
this is REALLY annoying.

KaszeL
Apprentice

Joined: 21 Feb 2005
Posts: 190

Posted: Wed Oct 24, 2007 2:11 pm Post subject:

New drivers don't work for me. I get black screen. As far as i can see, my card is properly detected, but X server just doesn't start...

Xorg.0.log

Code:

X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.22-ck1 x86_64
Current Operating System: Linux kaszelws 2.6.22-ck1 #12 SMP PREEMPT Tue Oct 2 00:30:43 CEST 2007 x86_64
Build Date: 02 October 2007 11:47:11AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 24 15:19:10 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Samsung SyncMaster 192T"
(**) | |-->Device "ATI Radeon x1250"
(**) |-->Input Device "Logitech UltraX Flat"
(**) |-->Input Device "Logitech MX500"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/OTF,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1,
/usr/share/fonts/corefonts,
/usr/share/fonts/freefonts,
/usr/share/fonts/sharefonts,
/usr/share/fonts/terminus,
/usr/share/fonts/ttf-bitstream-vera,
/usr/share/fonts/unifont,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/artwiz,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib64/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7b0880
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib64/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,7910 card 1458,5000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1002,7912 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4380 card 1458,b005 rev 00 class 01,06,01 hdr 00
(II) PCI: 00:13:0: chip 1002,4387 card 1458,5004 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4388 card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4389 card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:3: chip 1002,438a card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:4: chip 1002,438b card 1458,5004 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:5: chip 1002,4386 card 1458,5004 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4385 card 1458,4385 rev 14 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,438c card 1458,5002 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:2: chip 1002,4383 card 1458,a002 rev 00 class 04,03,00 hdr 00
(II) PCI: 00:14:3: chip 1002,438d card 1458,5001 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4384 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:05:0: chip 1002,791e card 1458,d001 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:05:2: chip 1002,7919 card 1458,7919 rev 00 class 04,03,00 hdr 00
(II) PCI: 02:0f:0: chip 10ec,8167 card 1458,e000 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(...)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib64/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "type1"
(II) Loading /usr/lib64/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib64/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib64/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.42.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:05:0
(II) ATI Proprietary Linux Driver Version Identifier:8.42.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.423.2
(II) ATI Proprietary Linux Driver Build Date: Oct 19 2007 16:14:11
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x791E) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
(...)
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 5 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Radeon X1200 Series" (Chipset = 0x791e)
(--) fglrx(0): (PciSubVendor = 0x1458, PciSubDevice = 0xd001)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdfe0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib64/xorg/modules//libint10.so
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib64/xorg/modules//libvbe.so
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.48
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RS690
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib64/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.42.3
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: b6 Serial#: 1297035577
(II) fglrx(0): Year: 2003 Week: 46
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) fglrx(0): Sync: Separate Composite SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.40
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.635 redY: 0.345 greenX: 0.295 greenY: 0.600
(II) fglrx(0): blueX: 0.140 blueY: 0.080 whiteX: 0.310 whiteY: 0.330
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HJGWB00697
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2db60039314f4d
(II) fglrx(0): 2e0d01030e261e8c2a9ae6a2584b9923
(II) fglrx(0): 144f54bfef8081800101010101010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000fd00384b1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00484a47574230303639370a2020000a
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Connected Display2: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display2 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: b6 Serial#: 1297035577
(II) fglrx(0): Year: 2003 Week: 46
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) fglrx(0): Gamma: 2.40
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.635 redY: 0.345 greenX: 0.295 greenY: 0.600
(II) fglrx(0): blueX: 0.140 blueY: 0.080 whiteX: 0.310 whiteY: 0.330
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HJGWB00697
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2db60039314f4d
(II) fglrx(0): 2e0d010380261e8c2a9ae6a2584b9923
(II) fglrx(0): 144f54bfef8081800101010101010101
(II) fglrx(0): 010101010101302a009851002a403070
(II) fglrx(0): 1300782d1100001e000000fd00384b1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00484a47574230303639370a20200098
(II) fglrx(0): End of Display2 EDID data --------------------
(WW) fglrx(0): More than one displays are connected,so clone mode is enabled
(II) fglrx(0): Primary Controller - DFP on secondary TMDS
(II) fglrx(0): Secondary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 15 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(...)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib64/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib64/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated with handle 0xdeadbeef
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfdefffff (0x100000) MX[B]
[1] 0 0 0xfdfe0000 - 0xfdfeffff (0x10000) MX[B]
[2] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfddfe000 - 0xfddfe0ff (0x100) MX[B]
[8] -1 0 0xfdffc000 - 0xfdffffff (0x4000) MX[B]
[9] -1 0 0xfe024000 - 0xfe027fff (0x4000) MX[B]
[10] -1 0 0xfe029000 - 0xfe0290ff (0x100) MX[B]
[11] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[B]
[12] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[B]
[13] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[B]
[14] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[B]
[15] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[B]
[16] -1 0 0xfe02f000 - 0xfe02f3ff (0x400) MX[B]
[17] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[B](B)
[18] -1 0 0xfdfe0000 - 0xfdfeffff (0x10000) MX[B](B)
[19] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[23] 0 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[26] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[27] -1 0 0x0000f900 - 0x0000f90f (0x10) IX[B]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
[32] -1 0 0x00000b00 - 0x00000b0f (0x10) IX[B]
[33] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[B]
[34] -1 0 0x0000fc00 - 0x0000fc03 (0x4) IX[B]
[35] -1 0 0x0000fd00 - 0x0000fd07 (0x8) IX[B]
[36] -1 0 0x0000fe00 - 0x0000fe03 (0x4) IX[B]
[37] -1 0 0x0000ff00 - 0x0000ff07 (0x8) IX[B]
[38] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
(...)
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.42.3
(II) fglrx(0): Date: Oct 19 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.22-ck1
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 18.
(II) fglrx(0): Exposed events to the /proc interface

emerge --info

Code:

Portage 2.1.3.16 (default-linux/amd64/2006.1, gcc-4.2.2, glibc-2.6.1-r0, 2.6.22-ck1 x86_64)
=================================================================
System uname: 2.6.22-ck1 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Timestamp of tree: Wed, 24 Oct 2007 04:30:01 +0000
app-shells/bash: 3.2_p17-r1
dev-java/java-config: 1.3.7, 2.1.2-r1
dev-lang/python: 2.4.4-r5, 2.5.1-r2
dev-python/pycrypto: 2.0.1-r6
sys-apps/baselayout: 1.12.10-r5
sys-apps/sandbox: 1.2.18.1-r1
sys-devel/autoconf: 2.13, 2.61-r1
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.18-r1
sys-devel/gcc-config: 1.4.0-r4
sys-devel/libtool: 1.5.24
virtual/os-headers: 2.6.23
ACCEPT_KEYWORDS="amd64 ~amd64"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=athlon64 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/revdep-rebuild /etc/terminfo /etc/texmf/web2c /etc/udev/rules.d"
CXXFLAGS="-march=athlon64 -O2 -pipe"
DISTDIR="/usr/data/distfiles"
FEATURES="distlocks metadata-transfer nodoc noinfo parallel-fetch sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
MAKEOPTS="-j3"
PKGDIR="/usr/data/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/usr/data/tmp"
PORTDIR="/usr/data/portage"
PORTDIR_OVERLAY="/usr/data/overlay/gnome /usr/data/overlay/xeffects"
SYNC="rsync://192.168.1.2/gentoo-portage"
USE="X a52 alsa amd64 arts avi bitmap-fonts bzip2 cairo cdr cli cracklib crypt cups dbus dlloader dri dvd dvdr eds emboss esd fam ffmpeg firefox flac gdbm gif gnome gpm gstreamer gtk gtk2 hal iconv jpeg ldap libg++ mad midi mp3 mp4 mpeg mpeg2 mudflap ncurses nls nptl nptlonly ogg opengl openmp oss pango pcre pdf pdflib perl png python quicktime readline reflection session spell spl ssl svg tiff truetype truetype-fonts type1-fonts udev unicode vorbis xml xorg xv zlib" ALSA_CARDS="hda-intel" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="radeon"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS

_________________
Z poważaniem
Tomasz Stiller

www.WhiteRabbit.pl

n3Cre0
Tux's lil' helper

Joined: 16 Jan 2007
Posts: 129

Posted: Wed Oct 24, 2007 2:29 pm Post subject:

Installed it yesterday. Works great

Finally no XGL (even tho CF in AIGLX feels really sloppy

)

Code:

# grep 'WW' /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72

Everybody else having this too?
_________________
OS: Linux 2.6.26 i686 Gentoo v2.0.0 Sound: HDA Intel
CPU: Intel(R) Pentium(R) M processor 1.73GHz (GenuineIntel)
Disk: 95.23GB Video: ATI Radeon Mobility X700 XL with Catalyst 8.08 RAM: 1011MB

rmh3093
Advocate

Joined: 06 Aug 2003
Posts: 2138
Location: Albany, NY

Posted: Wed Oct 24, 2007 2:42 pm Post subject:

n3Cre0 wrote:

Installed it yesterday. Works great

Finally no XGL (even tho CF in AIGLX feels really sloppy

)

Code:

Everybody else having this too?

yeah I have this!!!! i have not been able to get compiz to work.... but I bet I could get berly running if emerged that
_________________
Do not meddle in the affairs of wizards, for they are subtle and quick to anger.

nicosaturno
n00b
n00b

Joined: 05 Apr 2005
Posts: 57

Posted: Wed Oct 24, 2007 2:54 pm Post subject:

Dottout wrote:

compiz fails:

Code:

compiz --replace
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

I tried to put fglrx in whitelist, edit /etc/xdg/compiz/compiz-manager, LIBGL_ALWAYS_INDIRECT=1 compiz --replace and both xorg-server 1.3 and 1.4
this is REALLY annoying.

same problem here, but i don't know how to change the whitelist...and what I have to change in fglrx in /etc/xdg/compiz/compiz-manager?

thanks

PS
I've got the 3D driver claims problem too...

VinzC
Watchman

Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood

Posted: Wed Oct 24, 2007 2:56 pm Post subject:

nine01a wrote:

That might be what I read to be watermarks with recent ATI drivers.

BTW rotflmao http://www.phoronix.com/forums/archive/index.php/t-3511.html ...
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739!

BlackiWid
n00b
n00b

Joined: 15 May 2003
Posts: 35

Posted: Wed Oct 24, 2007 2:56 pm Post subject:

Dottout wrote:

compiz fails:

Code:

compiz --replace
compiz (core) - Fatal: GLX_EXT_texture_from_pixmap is missing
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0

I tried to put fglrx in whitelist, edit /etc/xdg/compiz/compiz-manager, LIBGL_ALWAYS_INDIRECT=1 compiz --replace and both xorg-server 1.3 and 1.4
this is REALLY annoying.

i have the same problem, could you try glxinfo, i have dri as su but not as user. can you confirm that?

then it must be some rightsproblem?

Display posts from previous:

	Gentoo Forums Forum Index Unsupported Software	All times are GMT Goto page 1, 2, 3, 4, 5, 6 Next
Page 1 of 6

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2024 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy