View previous topic :: View next topic |
Author |
Message |
DawgG l33t
Joined: 17 Sep 2003 Posts: 866
|
Posted: Fri Nov 02, 2007 2:06 pm Post subject: PATA marvell 88SE6101: dvdrw recognized but no device SOLVED |
|
|
i use an intel-965 mobo with an add-on marvell 88SE6101 pata-chip. it's supposed to be supported, but using 2.6.21 and .23 no devices are created and the dvdrw connected to it remains unusable. (cdrecord CAN use it, but users have to use k3b which can't, and reading is impossible). bios-settings are IDE: native and SATA: ahci.
Code: | lspci: 02:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface (rev b1) |
Code: | wsadmin@(none) ~ $ cdrecord --scanbus
Cdrecord-ProDVD-Clone 2.01.01a11 (i686-pc-linux-gnu) Copyright (C) 1995-2006 Jörg Schilling
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'ATA ' 'SAMSUNG HD080HJ ' 'ZH10' Disk
[SNIP]
scsibus6:
6,0,0 600) 'HL-DT-ST' 'DVDRAM GSA-H12N ' 'UL01' Removable CD-ROM
[SNIP] |
as expected i can burn a cd with cdrecord; but in k3b i found no way to add params to cdrecord.
i get this booting w/out any related params with all kernels:
Code: | wsadmin@(none) ~ $ dmesg | grep -i dvd
scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H12N UL01 PQ: 0 ANSI: 5 |
and an aditional line when booting 2.6.23 with all-generic-ide
Code: | wsadmin@(none) ~ $ dmesg | grep -i dvd
ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66
scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H12N UL01 PQ: 0 ANSI: 5 |
the sg-devices always show up:
Code: | wsadmin@(none) ~ $ ls /dev/sg*
/dev/sg0 /dev/sg1 |
i also tried using MAKEDEV, but nothing changed.
pls help me make the device alvailable to ALL users and k3b using a "normal" device like hda or sr0. _________________ DUMM KLICKT GUT.
Last edited by DawgG on Mon Nov 05, 2007 8:27 am; edited 1 time in total |
|
Back to top |
|
|
cyrillic Watchman
Joined: 19 Feb 2003 Posts: 7313 Location: Groton, Massachusetts USA
|
Posted: Sat Nov 03, 2007 3:10 pm Post subject: Re: PATA marvell 88SE6101 : dvdrw recognized but no device |
|
|
DawgG wrote: | pls help me make the device alvailable to ALL users and k3b using a "normal" device like hda or sr0. |
You need to load the "sr_mod" module (SCSI cdrom support), and then you will have /dev/sr0. |
|
Back to top |
|
|
DawgG l33t
Joined: 17 Sep 2003 Posts: 866
|
Posted: Mon Nov 05, 2007 8:24 am Post subject: |
|
|
Quote: | You need to load the "sr_mod" module |
THX a lot! that did the trick. :D _________________ DUMM KLICKT GUT. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|