Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
problema GLX con nvidia-drivers
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Fri Sep 28, 2007 3:31 pm    Post subject: problema GLX con nvidia-drivers Reply with quote

Sono passato dal driver via al driver nvidia dopo aver installato una scheda Nvidia PCI-Express e aver ricompilato xorg-server con VIDEO_CARDS="nvidia".
Il problema è questo: GLX sembra non voler funzionare, Xorg restituisce questo errore
Quote:
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0): log file that the GLX module has been loaded in your X
(EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
(EE) NVIDIA(0): you continue to encounter problems, Please try
(EE) NVIDIA(0): reinstalling the NVIDIA driver.
(EE) AIGLX: DRI module not loaded

Uso x11-drivers/nvidia-drivers-100.14.09,
Xorg.conf è configurato così:
Code:
Section "Module"
Load        "dbe"
    SubSection  "extmod"
      Option    "omit xfree86-dga"
    EndSubSection
Load       "glx"
EndSection

Ho cercato risposte sul forum ma niente sembra funzionare, se qualcuno ha suggerimenti saranno davvero apprezzati!
Back to top
View user's profile Send private message
CarloJekko
Veteran
Veteran


Joined: 31 Mar 2005
Posts: 1315
Location: Baia Domizia :-)

PostPosted: Fri Sep 28, 2007 4:45 pm    Post subject: Reply with quote

provato a leggere qui?
http://gentoo-wiki.com/HOWTO_nVidia_Drivers
_________________
C.
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Fri Sep 28, 2007 4:49 pm    Post subject: Reply with quote

Seguito alla lettera!
Back to top
View user's profile Send private message
Scen
Retired Dev
Retired Dev


Joined: 29 Jul 2003
Posts: 2470
Location: Padova, Italy

PostPosted: Fri Sep 28, 2007 7:16 pm    Post subject: Reply with quote

Code:

eselect opengl list

cosa dice?
_________________
I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Fri Sep 28, 2007 8:14 pm    Post subject: Reply with quote

Code:
> eselect opengl list
Available OpenGL implementations:
  [1]   nvidia *
  [2]   xorg-x11
Back to top
View user's profile Send private message
riverdragon
Veteran
Veteran


Joined: 14 Sep 2006
Posts: 1269
Location: Verona

PostPosted: Sun Sep 30, 2007 10:33 am    Post subject: Reply with quote

Hai provato a reinstallare il pacchetto? A volte è l'unica soluzione.
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Sun Sep 30, 2007 11:04 am    Post subject: Reply with quote

Ho reinstalato nvidia-drivers, xorg, ricompilato il kernel... niente!
E` la prima volta che il driver nvidia mi da problemi e non capisco proprio dove sbaglio.
Back to top
View user's profile Send private message
Laux
n00b
n00b


Joined: 25 Apr 2007
Posts: 44
Location: Monkey Island

PostPosted: Sun Sep 30, 2007 11:09 am    Post subject: Reply with quote

A suo tempo mi trovai ad avere problemi con nVidia, ti indico due controllini da fare:
1) Suppongo che i driver nVidia siano supportati dalla tua scheda, ma a volte ci sono dei piccoli problemi: controlla la lista di schede supportate sul sito nVidia.
2) Xorg aggiornato: con un amico dovemmo aggiornare xorg poichè incompatibile con i drive aggiornati nVidia

Giusto per sicurezza ;)
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Sun Sep 30, 2007 11:14 am    Post subject: Reply with quote

La scheda è supportata (6200LE attualmente in commercio), e la versione di xorg-server installata è la più recente.
Back to top
View user's profile Send private message
regisinferni
n00b
n00b


Joined: 30 Sep 2007
Posts: 26

PostPosted: Sun Sep 30, 2007 12:39 pm    Post subject: Reply with quote

prova con un nvidia-xconfig

avevo un problema simile con la mia 6600

Se ti può essere d'aiuto ecco il mio xorg.conf

Code:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (root@evilzpc)  Sat Sep 29 18:57:44 Local time zone must be set--see zic manual page 2007

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder26)  Wed Sep 12 14:29:17 PDT 2007
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
#    Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    Identifier     "Simple Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse1" "CorePointer"
    InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
#    RgbPath   "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
#    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"
# The module search path.  The default path is shown here.
#    ModulePath "/usr/lib/modules"
    FontPath        "/usr/share/fonts/misc/"
    FontPath        "/usr/share/fonts/Type1/"
    FontPath        "/usr/share/fonts/100dpi/"
    FontPath        "/usr/share/fonts/75dpi/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
#    Load        "type1"
# This loads the GLX module
    Load       "glx"
# This loads the DRI module
#    Load       "dri"
    Load           "dbe"     # Double buffer extension
    SubSection     "extmod"
        Option         "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load           "freetype"
#    Load        "xtt"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"

#    Option   "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
    Identifier     "Keyboard1"
    Driver         "kbd"
    Option         "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "logiaccess"
    Option         "XkbLayout" "it"
EndSection

Section "InputDevice"

# Identifier and driver
#    Option "Resolution"   "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"   "9600"
#    Option "SampleRate"   "150"
# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Identifier     "Mouse1"
    Driver         "mouse"
    Option         "Protocol" "Auto"   # Auto detect
    Option         "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
    Option         "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
    Option         "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier     "My Monitor"
    HorizSync       31.5 - 64.3
    VertRefresh     50.0 - 90.0
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "CRT-0"
    HorizSync       31.5 - 64.3
    VertRefresh     50.0 - 90.0
EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset   "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks   25.2 28.3
    Identifier     "Standard VGA"
    Driver         "nvidia"
    VendorName     "Unknown"
    BoardName      "Unknown"
Option   "AddARGBGLXVisuals" "true"
Option   "UseEvents"         "false"
Option   "RenderAccel"       "true"
EndSection

Section "Device"

    VideoRam    262144
    # Insert Clocks lines here if appropriate
    Identifier     "** NVIDIA (generic)                   [nv]"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6600"
EndSection

Section "Screen"
    Identifier     "Screen 1"
    Device         "** NVIDIA (generic)                   [nv]"
    Monitor        "My Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Viewport    0 0
        Depth       8
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       16
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Viewport    0 0
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1024x768_75 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
EndSection

Section "Extensions"
        Option      "Composite"   "enable"
EndSection
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Sun Sep 30, 2007 12:46 pm    Post subject: Reply with quote

Mi sento di escludere un problema procedurale nell'installazione del driver, così come un problema di configurazione di xorg.conf
Back to top
View user's profile Send private message
riverdragon
Veteran
Veteran


Joined: 14 Sep 2006
Posts: 1269
Location: Verona

PostPosted: Sun Sep 30, 2007 1:23 pm    Post subject: Reply with quote

ginsoak wrote:
La scheda è supportata (6200LE attualmente in commercio), e la versione di xorg-server installata è la più recente.

Più recente vuol dire:
più recente stabile = 1.3.0.0
più recente = 1.4-r1
Mi risulta che i driver binari nvidia non supportino ancora correttamente xorg 7.3 (ovvero xorg-server-1.4).
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Sun Sep 30, 2007 1:29 pm    Post subject: Reply with quote

Più recente, stabile, quindi 1.3.0.0 :wink:
Back to top
View user's profile Send private message
regisinferni
n00b
n00b


Joined: 30 Sep 2007
Posts: 26

PostPosted: Sun Sep 30, 2007 6:12 pm    Post subject: Reply with quote

Quote:

Mi risulta che i driver binari nvidia non supportino ancora correttamente xorg 7.3 (ovvero xorg-server-1.4).


I 100.14.19 supportano perfettamente xorg 7.3, e quindi la 1.4-r1. Testati personalmente sulla mia pelle :lol:

Comunque hai provato a dare un
Code:
modprobe -r nvidia
seguito da un
Code:
 modprobe -a nvidia
?
Back to top
View user's profile Send private message
ginsoak
Tux's lil' helper
Tux's lil' helper


Joined: 10 Feb 2005
Posts: 139
Location: Pisa - Italy

PostPosted: Mon Oct 01, 2007 7:29 am    Post subject: Reply with quote

Il modulo si carica correttamente.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum