Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Mouse serial e atkbd.c: Spurious NAK on isa0060/serio0
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Portuguese
View previous topic :: View next topic  
Author Message
ucesario
n00b
n00b


Joined: 27 Sep 2007
Posts: 1
Location: Brasil

PostPosted: Thu Sep 27, 2007 5:56 pm    Post subject: Mouse serial e atkbd.c: Spurious NAK on isa0060/serio0 Reply with quote

Primeiramente, Olá pessoal.

Galera, estou instalando o Gentoo num K6-II que tenho aqui em casa.
O PC está ok, tem um windows2000 funcionando perfeito ( que eu vou apagar )

O meu problema é que o mouse não quer funcionar, é um mouse serial e quando o kernel
inicia apresenta o seguinte erro.

Quote:
input: AT Translated Set 2 keyboard as /class/input/input0
atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.


O perfil é 2006.1 e o kernel é o 2.6.20-r5

O kernel esta compilado com mouse serial e portas I/O serial, ambos but-in
Tb está ativado o event, este como modulo
Estou Usando UDEV

Dou cat /dev/input/mice e nada.

Já tentei ativar o ps/2, só pra testar ( o K6-II utiliza soket Super7 e na placa em questão, apesar de possuir a opção para ps/2 no setup, não possui o conector. dessa forma deixo o ps/2 desativado.)

Possuia o slack rodando nesta maquina, com um kernel 2.6.11, mas sem udev, e tudo funcionava perfeito.

abaixo o dmesg
Quote:
Linux version 2.6.22-gentoo-r5 (root@localhost) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #13 Thu Sep 27 08:37:55 BRT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
192MB LOWMEM available.
Entering add_active_range(0, 0, 49152) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 49152
early_node_map[1] active PFN ranges
0: 0 -> 49152
On node 0 totalpages: 49152
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 352 pages used for memmap
Normal zone: 44704 pages, LIFO batch:7
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 0c000000:f2c00000)
Built 1 zonelists. Total pages: 48768
Kernel command line: BOOT_IMAGE=gentoo ro root=305
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 359.570 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 191712k/196608k available (1668k kernel code, 4456k reserved, 521k data, 148k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffffd000 - 0xfffff000 ( 8 kB)
vmalloc : 0xcc800000 - 0xffffb000 ( 823 MB)
lowmem : 0xc0000000 - 0xcc000000 ( 192 MB)
.init : 0xc0326000 - 0xc034b000 ( 148 kB)
.data : 0xc02a1235 - 0xc0323784 ( 521 kB)
.text : 0xc0100000 - 0xc02a1235 (1668 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 719.48 BogoMIPS (lpj=359742)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 00000000 00000000 00000000
Enabling new style K6 write allocation for 192 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 0080213f 808029bf 00000000 00000002 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb61, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS [1039/0008] at 0000:00:01.0
Time: tsc clocksource has been installed.
pnp: the driver 'system' has been registered
PCI: Bridge: 0000:00:02.0
IO window: c000-cfff
MEM window: f7900000-f79fffff
PREFETCH window: f6700000-f77fffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: checksum for device 1 is not valid (0x8b)
pnp: Calling quirk for 00:02.03
pnp: CMI8330 quirk - fixing interrupts and dma
isapnp: Card 'WIN5602 MODEM LINE INTERFACE CARD.'
isapnp: Card 'CMI8330/C3D Audio Adapter'
isapnp: 2 Plug & Play cards detected total
8139too Fast Ethernet driver 0.9.28
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xdc00, 00:30:cd:81:56:07, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:00.1
PCI: setting IRQ 11 as level-triggered
PCI: Assigned IRQ 11 for device 0000:00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS5591/2 ATA 33 controller
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SV2001H, ATA DISK drive
hda: selected mode 0x42
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: GCR-8523B, ATAPI CD/DVD-ROM drive
hdd: selected mode 0x22
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39179952 sectors (20060 MB) w/1945KiB Cache, CHS=38869/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed
input: AT Translated Set 2 keyboard as /class/input/input0
atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
pnp: the driver 'ns558' has been registered
pnp: match found with the PnP device '00:02.02' and the driver 'ns558'
pnp: Device 00:02.02 activated.
gameport: NS558 PnP Gameport is pnp00:02.02/gameport0, io 0x200, speed 579kHz
EXT3 FS on hda5, internal journal
Adding 305192k swap on /dev/hda6. Priority:-1 extents:1 across:305192k
Real Time Clock Driver v1.12ac

[/quote]
_________________
---------------------
Bira :]]
---------------------
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portuguese All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum