Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[ OpenGL ] Lancement Return to Castle Wolfenstein
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
Oneal
n00b
n00b


Joined: 19 Dec 2003
Posts: 53
Location: France (42)

PostPosted: Sat Sep 15, 2007 1:43 pm    Post subject: [ OpenGL ] Lancement Return to Castle Wolfenstein Reply with quote

Bonjour à tous !

Je souhaite jouer à Return to Castle Wolfenstein sur mon PC.
Ce n'est pas une bete de cours (Intel I810, 256 Mo RAM, Celeron 2 Ghz), mais je pense qu'il doit pouvoir quand meme arriver à le faire fonctionner car le jeu n'est pas récent.

J'ai suivi les instructions d'installation, mais visiblement j'ai un probleme avec l'openGL.
Voici ce que j'optiens quand je lance le jeu

Code:
6384 files in pk3 files
execing default.cfg
couldn't exec language.cfg
execing wolfconfig_mp.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok

------- Input Initialization -------
Joystick is not active.
------------------------------------
Bypassing CD checks
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
Loaded 714 translation strings from scripts/translation.cfg
Loaded 97 translation strings from translations/rocket.cfg
Loaded 86 translation strings from translations/dam.cfg
Loaded 114 translation strings from translations/tram.cfg
Loaded 57 translation strings from translations/chateau.cfg
Loaded 54 translation strings from translations/keep.cfg
Loaded 73 translation strings from translations/icelab.cfg
Loaded 6 translation strings from translations/translation-1_4.cfg
----- Client Initialization Complete -----
----- R_Init -----
...loading libGL.so.1: Initializing OpenGL display
...setting mode 3: 640 480
Using XFree86-VidModeExtension Version 2.2
XFree86-VidModeExtension Activated at 640x480
Using 4/4/4 Color bits, 16 depth, 0 stencil display.
GL_RENDERER: Mesa GLX Indirect


***********************************************************
 You are using software Mesa (no hardware acceleration)!   
 Driver DLL used: libGL.so.1
 If this is intentional, add
       "+set r_allowSoftwareGL 1"
 to the command line when starting the game.
***********************************************************
...WARNING: could not set the given mode (3)
----- CL_Shutdown -----
RE_Shutdown( 1 )
-----------------------
----- CL_Shutdown -----
-----------------------
Sys_Error: GLimp_Init() - could not load OpenGL subsystem




Voici mon xorg.conf
Code:

gentoo-nec ~ # cat /etc/X11/xorg.conf

# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************
# **********************************************************************
# Server flags section.
# **********************************************************************
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
#    Mode 0666
# EndSection

Section "ServerLayout"

# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
        Identifier     "Simple Layout"
        Screen         "Screen 1" 0 0
        InputDevice    "Mouse1" "CorePointer"
        InputDevice    "Keyboard1" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
#    FontPath   "/usr/share/fonts/TTF/"
#    FontPath   "/usr/share/fonts/OTF"
#    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/100dpi/"
#    FontPath   "/usr/lib/X11/fonts/local/"
#    FontPath   "/usr/lib/X11/fonts/misc/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/100dpi/:unscaled"
#    FontPath   "/usr/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/lib/X11/fonts/Type1/"
#    FontPath   "/usr/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/lib/X11/fonts/freefont/"
#    FontPath   "/usr/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/lib/X11/fonts/100dpi/"
# The module search path.  The default path is shown here.
        FontPath     "/usr/share/fonts/misc/"
        FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"

# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
    Load        "type1"
# This loads the GLX module
    Load       "glx"
# This loads the DRI module
    Load       "dri"
        Load  "dbe"     # Double buffer extension
        SubSection "extmod"
                Option      "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
        Load  "freetype"
#    Load        "xtt"
EndSection

Section "InputDevice"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
#    Option     "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""
#    Option "XkbDisable"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option      "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc104"
        Option      "XkbLayout" "fr"
EndSection

Section "InputDevice"

# Identifier and driver
# the following line.
#    Option "Protocol"  "Xqueue"
# Mouse-speed setting for PS/2 mouse.
#    Option "Resolution"        "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate"  "9600"
#    Option "SampleRate"        "150"
# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "Protocol" "ImPS/2" # Auto detect
        Option      "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
        Option      "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection

Section "Monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#    HorizSync  30-64         # multisync
#    HorizSync  31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync  15-25, 30-50  # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
 ### Comment all HorizSync and VertRefresh values to use DDC:
 ### Comment all HorizSync and VertRefresh values to use DDC:
        Identifier   "My Monitor"
 ### Comment all HorizSync and VertRefresh values to use DDC:
#       HorizSync    31.5 - 57.0
#       VertRefresh  50.0 - 70.0
HorizSync       30-82
VertRefresh     50-85

EndSection

Section "Device"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset    "generic"
# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks     25.2 28.3
        Identifier  "Standard VGA"
        Driver      "vga"
        VendorName  "Unknown"
        BoardName   "Unknown"
EndSection

Section "Device"

    #VideoRam    16384
    # Insert Clocks lines here if appropriate
        Identifier  "** Intel i810 (generic)               [i810]"
        Driver      "i810"
        Card        "** Intel i810 (generic)               [i810]"
EndSection

Section "Screen"
        Identifier "Screen 1"
        Device     "** Intel i810 (generic)               [i810]"
        Monitor    "My Monitor"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     8
                Modes    "1024x768"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes    "1024x768"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1024x768"
        EndSubSection
EndSection
gentoo-nec ~ #
[/quote]
[/code]
Back to top
View user's profile Send private message
julroy67
Apprentice
Apprentice


Joined: 03 Feb 2007
Posts: 209
Location: Alsace >> /dev/null

PostPosted: Sat Sep 15, 2007 3:17 pm    Post subject: Re: [ OpenGL ] Lancement Return to Castle Wolfenstein Reply with quote

Oneal wrote:

----- R_Init -----
...loading libGL.so.1: Initializing OpenGL display
...setting mode 3: 640 480
Using XFree86-VidModeExtension Version 2.2
XFree86-VidModeExtension Activated at 640x480
Using 4/4/4 Color bits, 16 depth, 0 stencil display.
GL_RENDERER: Mesa GLX Indirect


***********************************************************
You are using software Mesa (no hardware acceleration)!
Driver DLL used: libGL.so.1
If this is intentional, add
"+set r_allowSoftwareGL 1"
to the command line when starting the game.
***********************************************************

Section "Device"

#VideoRam 16384
# Insert Clocks lines here if appropriate
Identifier "** Intel i810 (generic) [i810]"
Driver "i810"
Card "** Intel i810 (generic) [i810]"
EndSection


Apparamment tu n'as pas activé l'accéleration 3D, le driver i810 le permet-il ? je ne sais pas moi.
_________________
63n700 L1nux P0w44 !

Intel Core2Quad 6600
Abit FP-IN9 SLI Fatal1ty Nforce 580i
Nvidia GeForce 8600 GTS
2 Go RAM DDR800 Corsair

Actualité des jeux sous Linux
Back to top
View user's profile Send private message
truc
Advocate
Advocate


Joined: 25 Jul 2005
Posts: 3199

PostPosted: Sun Sep 16, 2007 6:40 pm    Post subject: Reply with quote

merci de ne pas nous mettre aveuglément les commentaires contenus dans les fichiers de conf (ici dans xorg.conf): ça n'aide pas, ça fait un post long, que personne n'a envie de lire, et voila :)


:twisted:
_________________
The End of the Internet!
Back to top
View user's profile Send private message
Oneal
n00b
n00b


Joined: 19 Dec 2003
Posts: 53
Location: France (42)

PostPosted: Fri Oct 12, 2007 8:17 pm    Post subject: Reply with quote

La carte graphique supporte l'accélération 3D OpenGL http://www.intel.com/support/graphics/sb/cs-009471.htm

En ce qui concerne le driver i810, je ne sais pas s'il supporte l'accélération 3D.

Comment puis je faire pour faire un test avec les paramètres d'accélération 3D ?
Back to top
View user's profile Send private message
TrizoLakai
Apprentice
Apprentice


Joined: 09 Jun 2006
Posts: 231
Location: Nantes (FRANCE)

PostPosted: Sat Oct 13, 2007 8:49 am    Post subject: Reply with quote

Tu devrais avoir ça :

Code:
~ % glxinfo | grep direct                                          °trizolakai°
direct rendering: Yes
~ %


donc la commande
Code:
glxinfo | grep direct
Back to top
View user's profile Send private message
Oneal
n00b
n00b


Joined: 19 Dec 2003
Posts: 53
Location: France (42)

PostPosted: Sat Oct 13, 2007 11:51 am    Post subject: Reply with quote

Code:
gentoo-nec ~ # glxinfo | grep direct
Error: unable to open display



Il y a peut etre un paramètre qui cloche dans mon xorg.conf ?
Dans la doc d'intel il parle de vbe... j'ai vu des choses similaires dans la doc d'intel.
Back to top
View user's profile Send private message
truc
Advocate
Advocate


Joined: 25 Jul 2005
Posts: 3199

PostPosted: Sat Oct 13, 2007 12:04 pm    Post subject: Reply with quote

Oneal wrote:
Code:
gentoo-nec ~ # glxinfo | grep direct
Error: unable to open display



Il y a peut etre un paramètre qui cloche dans mon xorg.conf ?
Dans la doc d'intel il parle de vbe... j'ai vu des choses similaires dans la doc d'intel.

t'es en 'root' là, faut executer la commande dans X avec l'utilisateur qui a fait startx
_________________
The End of the Internet!
Back to top
View user's profile Send private message
Oneal
n00b
n00b


Joined: 19 Dec 2003
Posts: 53
Location: France (42)

PostPosted: Sat Oct 13, 2007 12:46 pm    Post subject: Reply with quote

Voilà ce que j'obtiens[/code] en mode user

Code:
linou@gentoo-nec ~ $ glxinfo | grep direct
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum