Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[sata] "soft resetting port" Problèmes ?
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
amaury.dg
n00b
n00b


Joined: 05 Feb 2006
Posts: 38
Location: Montigny-Le-Tileul / Belgique

PostPosted: Mon Aug 27, 2007 10:56 am    Post subject: [sata] "soft resetting port" Problèmes ? Reply with quote

Salut,

Voilà je viens de voir comme message dans le kernel ceci:

"ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen" (détails cf. code plus bas + sortie de smartctl)

Je ne sais pas trop ce que cela veut dire et si c'est grave ou non.....

Alors si quelqu'un peut m'éclairer là dessus....

Note: kernel 2.6.22.5 patché cfs 20.4 (arch amd64 SMP)

Merci

Code:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 512 in
         res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA


Sortie de "smartctl -a -d ata /dev/sda" :

Code:

smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3320620AS
Serial Number:    5QF477TS
Firmware Version: 3.AAK
User Capacity:    320.072.933.376 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Aug 27 12:54:11 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 115) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   105   072   006    Pre-fail  Always       -       15224642
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       166
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       3
  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       29863277
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1648
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       166
187 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
189 Unknown_Attribute       0x003a   100   100   000    Old_age   Always       -       0
190 Unknown_Attribute       0x0022   066   053   045    Old_age   Always       -       588644386
194 Temperature_Celsius     0x0022   034   047   000    Old_age   Always       -       34 (Lifetime Min/Max 0/18)
195 Hardware_ECC_Recovered  0x001a   063   045   000    Old_age   Always       -       238306100
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1648         -
# 2  Short offline       Completed without error       00%       914         -
# 3  Extended offline    Completed without error       00%        23         -
# 4  Short offline       Completed without error       00%        22         -
# 5  Extended offline    Interrupted (host reset)      90%        21         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Back to top
View user's profile Send private message
amaury.dg
n00b
n00b


Joined: 05 Feb 2006
Posts: 38
Location: Montigny-Le-Tileul / Belgique

PostPosted: Tue Aug 28, 2007 5:00 pm    Post subject: Reply with quote

up ! :p

Personnes n'as d'idées là dessus ?
Back to top
View user's profile Send private message
El_Goretto
Moderator
Moderator


Joined: 29 May 2004
Posts: 3110
Location: Paris

PostPosted: Tue Aug 28, 2007 9:18 pm    Post subject: Reply with quote

Ben si ça peut te rassurer, j'ai aussi des choses comme çà au boot de mon serveur (chipset VIA) depuis un noyau genre 2.6.19 ou pas loin. Comme j'avais pas de problèe avant, et que j'en ai pas non plus depuis, j'ai laissé de côté la chose :)
_________________
-FreeNAS: µ-serv Gen8 G1610T, 16Go ECC & µ-serv N40L, 8Go ECC
-FreeBSD 11/Vimage/Jails: DS61, i3 2100T, 16Go
-Réseau: ERL-3 + ESL-24 + GS108Tv2
-NAS: RN312
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum