Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] X si blocca occupando la CPU
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page 1, 2, 3  Next  
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 12:32 pm    Post subject: [Solved] X si blocca occupando la CPU Reply with quote

Salve a tutti. Sono mesi e mesi che ho questo problema e non ho ancora trovato una soluzione. Ho provato dovunque ma nulla, purtroppo è un problema un po' complicato da debuggare e quindi è difficile trovare una soluzione. Magari però voi potete darmi qualche dritta comunque, non si sa mai. Il mio sistema è up 24 al giorno. Sempre con X caricato. Da parecchi mesi a questa parte, ha cominciato a mostrare questo problema: ogni tanto, con periodi di tempo variabili, il processo X porta all'occupazione completa della CPU per un periodo di tempo non limitato. Tipo loop infinito diciamo. Fortunatamente la soluzione al problema non è poi così complessa, do un kill di X e lo faccio ripartire. Però è molto scomodo, e poi spesso mi manda la CPU al 100% per giorni prima che me ne accorga, cosa non so quanto sana, mi rallenta eventuali compilazioni e... beh, il pc è in camera, ed io ci dormo pure qui dentro... fa caldo già di suo ragazzi, da morire :) e continuando così penso aumenti la dispersione di calore, no? Non usando il pc direttamente, neanche mi accorgo subito che parte il problema. Mica qualcuno ha avuto lo stesso problema per caso? Ho controllato parecchie cose, ho fatto downgrade di parecchi pacchetti che ora non ricordo neanche più, son passati mesi, mai nulla. Non mi riesce di capire quale sia il problema. C'è qualche cosa che posso fare per capirlo per caso? Ho sperato che aspettando magari, il pacchetto incriminato sarebbe stato corretto, ma dopo parecchi mesi sono ancora qui con lo stesso problema e pare proprio che sia l'unico.
Grazie per qualsiasi tentativo.


Last edited by Luc484 on Tue Sep 18, 2007 12:29 am; edited 1 time in total
Back to top
View user's profile Send private message
masterbrian
Guru
Guru


Joined: 13 Feb 2004
Posts: 461

PostPosted: Fri Aug 17, 2007 1:22 pm    Post subject: Reply with quote

Ciao,

intanto sarebbe utile qualche info:

ke kernel hai, ke sk video hai, che cpu hai, se usi un arch stable o meno... versioni dei driver video e di X, magari anche la configurazione di X e un dmesg prima dopo e durante un problema aiuterebbero. :)
_________________
[img:f6b0c3bcba]http://www.danasoft.com/sig/MasterBrian.jpg[/img:f6b0c3bcba]
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 1:55 pm    Post subject: Reply with quote

Certo, allora cerco di darti tutte le informazioni che mi hai chiesto.

Versione del kernel
Code:
cluca luca # uname -r
2.6.18-gentoo-r3


Scheda video è una ATI Radeon 7000, ed i driver sono x11-drm 20070314. La CPU è un AMD 2,8GHz. Utilizzo poi xorg-x11 versione 7.2. In make.conf ho impostato x86, ma parecchi pacchetti sono ~x86. Comunque ti do anche questo, tipo riassunto:

Code:
cluca luca # emerge --info
Portage 2.1.3.4 (default-linux/x86/2007.0/desktop, gcc-4.1.2, glibc-2.5-r4, 2.6.18-gentoo-r3 i686)
=================================================================
System uname: 2.6.18-gentoo-r3 i686 AMD Athlon(tm) XP 2800+
Gentoo Base System release 1.12.9
Timestamp of tree: Sun, 12 Aug 2007 10:00:01 +0000
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [disabled]
ccache version 2.4 [enabled]
dev-java/java-config: 1.3.7, 2.0.33-r1
dev-lang/python:     2.3.5-r3, 2.4.4-r4
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache:     2.4-r7
sys-apps/sandbox:    1.2.17
sys-devel/autoconf:  2.13, 2.61
sys-devel/automake:  1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils:  2.17
sys-devel/gcc-config: 1.3.16
sys-devel/libtool:   1.5.23b
virtual/os-headers:  2.6.21
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/gconf /etc/php/apache2-php5/ext-active/ /etc/php/cgi-php5/ext-active/ /etc/php/cli-php5/ext-active/ /etc/revdep-rebuild /etc/splash /etc/terminfo /etc/texmf/web2c"
CXXFLAGS="-march=athlon-xp -O2 -pipe -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="http://gentoo.osuosl.org/ http://gentoo.arcticnetwork.ca/"
LANG="en_US.utf8"
LC_ALL="en_US.utf8"
LDFLAGS="-Wl,-O1"
LINGUAS="en it"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X accessibility acpi addbookmarks aiglx alias alsa amr arts asf authdaemond autoreplace berkdb bitmap-fonts bluetooth branding cairo cdr cli connectionstatus contactnotes cracklib crypt cups dbus dri dvd dvdr dvdread eds emboss encode esd evo fam fasttrack ffmpeg firefox fortran gadu gcj gd gdbm gif gimp gpm groupwise gstreamer gtk hal highlight history iconv ipv6 irc isdnlog jingle jpeg kde kerberos ldap mad midi mikmod mp3 mpeg mudflap musicbrainz ncurses netmeeting nls nowlistening nptl nptlonly nsplugin ogg opengl openmp oss pam pango pcre pdf perl pic png ppds pppd python qt3 qt3support qt4 quicktime readline reflection samba sametime sasl scanner sdk sdl server session sms spell spl ssl statistics svg tcpd texteffect threadsafe tiff translator truetype truetype-fonts type1-fonts unicode usb utempter v4l vorbis webpresence win32codecs winpopup x86 xml xorg xv xvid yahoo zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="en it" USERLAND="GNU" VIDEO_CARDS="radeon"
Unset:  CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


Configurazione di X intendi xorg.conf suppongo no? Mi scuso se il post diventa molto lungo, ma ci sono tutti i commenti originali:

Code:
Section "Extensions"
        Option         "Composite"   "Enable"
EndSection
Section "Module"
    Load   "vnc"
    Load        "dbe"     # Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load       "glx"
    Load       "dri"
EndSection
Section "Files"
    ModulePath "/usr/lib/modules/extensions"
    ModulePath "/usr/lib/xorg/modules"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath    "/usr/share/fonts/ttf-bitstream-vera"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
    Identifier   "Keyboard1"
    Driver   "kbd"
    Option "AutoRepeat" "500 30"
    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "it"
EndSection
Section "InputDevice"
    Identifier   "Mouse1"
    Driver   "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/misc/psaux"
    Option "ZAxisMapping"  "4 5"
    Option "Emulate3Buttons"
EndSection
Section "Monitor"
   Identifier     "HANNS.GHU196D"
   Option      "DPMS"      "true"
   HorizSync   80
   VertRefresh 75
EndSection
Section "Device"
    Identifier   "Standard VGA"
    VendorName   "Unknown"
    BoardName   "Unknown"
    Driver     "vga"
EndSection
Section "Device"
    Identifier  "ATI7000"
    Driver      "radeon"
    Option "InternalAGPGART" "no"
    Option      "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
    Identifier  "Screen 1"
    Device      "ATI7000"
    Monitor     "HANNS.GHU196D"
    DefaultDepth 24
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection
Section "ServerLayout"
    Identifier     "Simple Layout"
    Option         "BlankTime"         "10"
    Option         "AIGLX" "true"
    Screen "Screen 1"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
   Mode 0666
EndSection


Qui viene il complesso. Purtroppo il problema parte ogni qualche giorno di media, quindi per darti quegli output devo aspettare che si ripresenti il problema. Intanto riporto il dmesg che ho adesso, ho dovuto killare X appena un'oretta fa penso, e da quel momento non ho più ricaricato X perché sto ricompilando openoffice, non so se possa essere utile:

Code:
cluca luca # dmesg
ter generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2800+ stepping 00
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf9d60, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 5000-500f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
PCI: Using IRQ router default [1106/3189] at 0000:00:00.0
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: e0000000-e1ffffff
  PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
vesafb: ATI Technologies Inc., R100, 01.00 (OEM: ATI RADEON VE)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5490
vesafb: pmi: set display start = c00c5524, set palette = c00c5570
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: no monitor limits have been set
vesafb: scrolling: redraw
vesafb: VBE state buffer size cannot be determined (eax: 0x0)
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xd8000000, mapped to 0xf0880000, using 10240k, total 65536k
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: WDC WD1600JB-00GVA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdb: max request size: 512KiB
hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2
hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
ide-floppy driver 0.99.newide
st: Version 20050830, fixed bufsize 32768, s/g segs 256
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 10, io mem 0xe2001000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 12, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 11, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 11, io base 0x0000e000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).
ALSA device list:
  No soundcards found.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xd400, IRQ 10, 00:40:33:53:DC:88.
8139too Fast Ethernet driver 0.9.27
eth1: RealTek RTL8139 at 0xf0822000, 00:20:ed:65:88:68, IRQ 11
eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
PCI: Setting latency timer of device 0000:00:11.5 to 64
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 500464k swap on /dev/hda3.  Priority:-1 extents:1 across:500464k
it87: Found IT8705F chip at 0x290, revision 2
it87-isa 9191-0290: Detected broken BIOS defaults, disabling PWM interface
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 24
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 208 bytes per conntrack
[drm] Initialized drm 1.0.1 20051102
PCI: Unable to reserve mem region #1:8000000@d8000000 for device 0000:01:00.0
[drm] Initialized radeon 1.25.0 20060524 on minor 0:
[drm] Used old pci detect: framebuffer loaded
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
spurious 8259A interrupt: IRQ7.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
  Vendor: Toshiba   Model: USB 2.0 Ext. HDD  Rev: 1.21
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
usb 1-6: USB disconnect, address 3
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
scsi 0:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 1560
lost page write due to I/O error on sda1
scsi 0:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 1560
lost page write due to I/O error on sda1
scsi 0:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 1560
lost page write due to I/O error on sda1
scsi 0:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 1560
lost page write due to I/O error on sda1
scsi 0:0:0:0: rejecting I/O to dead device
Buffer I/O error on device sda1, logical block 0
lost page write due to I/O error on sda1
usb 1-6: new high speed USB device using ehci_hcd and address 4
usb 1-6: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-6: USB disconnect, address 4
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 2: 940040000000017a
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
usb 1-6: new high speed USB device using ehci_hcd and address 5
usb 1-6: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
  Vendor: Toshiba   Model: USB 2.0 Ext. HDD  Rev: 1.21
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 0b 00 00 08
sda: assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: Attached scsi disk sda
sd 2:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
usb 1-6: USB disconnect, address 5
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
mtrr: 0xd8000000,0x8000000 overlaps existing 0xd8000000,0x4000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs?


Appena riesco a riprodurre il problema ti procuro il dmesg durante. Grazie per la risposta!


Last edited by Luc484 on Fri Aug 17, 2007 2:14 pm; edited 1 time in total
Back to top
View user's profile Send private message
masterbrian
Guru
Guru


Joined: 13 Feb 2004
Posts: 461

PostPosted: Fri Aug 17, 2007 2:02 pm    Post subject: Reply with quote

Hai notato se il problema si presenta solo quando la macchina e' sotto sforzo?
_________________
[img:f6b0c3bcba]http://www.danasoft.com/sig/MasterBrian.jpg[/img:f6b0c3bcba]
Back to top
View user's profile Send private message
Kernel78
Moderator
Moderator


Joined: 24 Jun 2005
Posts: 3654

PostPosted: Fri Aug 17, 2007 2:02 pm    Post subject: Reply with quote

Giusto per rendere un po' meno kilometrico il post potresti togliere i commenti dalla configurazione di X ?
Puoi usare il comando che ho nella firma.
_________________
Le tre grandi virtù di un programmatore: pigrizia, impazienza e arroganza. (Larry Wall).
Prima di postare un file togli i commenti con
Code:
grep -vE '(^[[:space:]]*($|(#|!|;|//)))'
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 2:21 pm    Post subject: Reply with quote

masterbrian wrote:
Hai notato se il problema si presenta solo quando la macchina e' sotto sforzo?


La macchina non viene quasi mai portata al 100% se non per le compilazioni. E mi pare che si sia sempre bloccata anche quando non faceva nulla di che. Però forse forse mi fai venire il dubbio... nel senso che ora sto cercando di risolvere il famoso problema con expat, e sto compilando di continuo, ed effettivamente si è bloccata 2 volte in 2 giorni, ed in particolare proprio stanotte che stava ricompilando openoffice. Potrebbe essere. Sai cosa, adesso ricompilo di nuovo openoffice, e vedo se per caso si blocca ancora. Magari è proprio sotto sforzo che da il problema.

Kernel78 wrote:
Giusto per rendere un po' meno kilometrico il post potresti togliere i commenti dalla configurazione di X ?
Puoi usare il comando che ho nella firma.


Ecco, perfetto, grazie mille. Volevo proprio farlo ma mi prendeva male dover toglierli tutti uno per uno :)
Back to top
View user's profile Send private message
to.alex
n00b
n00b


Joined: 08 Apr 2007
Posts: 67

PostPosted: Fri Aug 17, 2007 2:29 pm    Post subject: Reply with quote

Luc484 wrote:
masterbrian wrote:
Hai notato se il problema si presenta solo quando la macchina e' sotto sforzo?


La macchina non viene quasi mai portata al 100% se non per le compilazioni. E mi pare che si sia sempre bloccata anche quando non faceva nulla di che. Però forse forse mi fai venire il dubbio... nel senso che ora sto cercando di risolvere il famoso problema con expat, e sto compilando di continuo, ed effettivamente si è bloccata 2 volte in 2 giorni, ed in particolare proprio stanotte che stava ricompilando openoffice. Potrebbe essere. Sai cosa, adesso ricompilo di nuovo openoffice, e vedo se per caso si blocca ancora. Magari è proprio sotto sforzo che da il problema.

Kernel78 wrote:
Giusto per rendere un po' meno kilometrico il post potresti togliere i commenti dalla configurazione di X ?
Puoi usare il comando che ho nella firma.


Ecco, perfetto, grazie mille. Volevo proprio farlo ma mi prendeva male dover toglierli tutti uno per uno :)


Hai KDE con su Superkaramba?
Se si, prova a disattivarlo e vedere se si blocca più.
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 2:33 pm    Post subject: Reply with quote

Si, ho KDE con superkaramba sempre attivi. Ho chiuso superkaramba, adesso vedo se così smette di darmi il problema. Però in realtà ho superkaramba da molto più tempo di quanto non si presenti il problema. Comunque sto provando così ora. Grazie mille.
Back to top
View user's profile Send private message
102376
l33t
l33t


Joined: 19 Mar 2005
Posts: 608

PostPosted: Fri Aug 17, 2007 2:43 pm    Post subject: Re: X si blocca occupando la CPU Reply with quote

Luc484 wrote:
Non usando il pc direttamente, neanche mi accorgo subito che parte il problema.

cosa intendi??? che ci accedi sa ssh, fa tipo server??
se si a che ti serve l'interfaccia grafica!
Back to top
View user's profile Send private message
Kernel78
Moderator
Moderator


Joined: 24 Jun 2005
Posts: 3654

PostPosted: Fri Aug 17, 2007 2:48 pm    Post subject: Re: X si blocca occupando la CPU Reply with quote

zocram wrote:
Luc484 wrote:
Non usando il pc direttamente, neanche mi accorgo subito che parte il problema.

cosa intendi??? che ci accedi sa ssh, fa tipo server??
se si a che ti serve l'interfaccia grafica!

Hai presente le icone, le finestre e tutto il resto ? :lol:
Scherzi a parte, anche io ho il pc a casa sempre acceso con kde anche se capita che faccia giorni senza accederci in locale ma solo via ssh dal ufficio o dai clienti ma kde lo tengo attivo cmq così mia moglie accende il monitor e è subito nel suo utente.
_________________
Le tre grandi virtù di un programmatore: pigrizia, impazienza e arroganza. (Larry Wall).
Prima di postare un file togli i commenti con
Code:
grep -vE '(^[[:space:]]*($|(#|!|;|//)))'
Back to top
View user's profile Send private message
102376
l33t
l33t


Joined: 19 Mar 2005
Posts: 608

PostPosted: Fri Aug 17, 2007 2:50 pm    Post subject: Reply with quote

era solo per risolvere il problema brutalmente!!!!! ;)
cmq io ho installato kde 3.5.7 ed è rimasto accesso per giorni, nussun problema!!!!
Back to top
View user's profile Send private message
Kernel78
Moderator
Moderator


Joined: 24 Jun 2005
Posts: 3654

PostPosted: Fri Aug 17, 2007 2:55 pm    Post subject: Reply with quote

zocram wrote:
era solo per risolvere il problema brutalmente!!!!! ;)
cmq io ho installato kde 3.5.7 ed è rimasto accesso per giorni, nussun problema!!!!

Il mio pc è acceso da quando ho installato kde 3.5.2 e oltre a riavviarlo quando modifico il kernel ho dovuto forzare un reset quando ho giocato troppo con virtualbox e mi si era krashato tutto.

Dubito che il problema sia in kde, più probabile che sia in superkaramba o in uno dei suoi temi o da qualche altra parte ... senza log dettagliati spariamo a caso ...
_________________
Le tre grandi virtù di un programmatore: pigrizia, impazienza e arroganza. (Larry Wall).
Prima di postare un file togli i commenti con
Code:
grep -vE '(^[[:space:]]*($|(#|!|;|//)))'
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 2:55 pm    Post subject: Reply with quote

Si, fino a quando posso faccio via ssh. Però KDE mi serve comunque, uso amarok più di 15 ore al giorno sfruttando il fatto che il pc è acceso per forza. Poi per questioni varie devono sempre essere connessi kopete e skype e sempre acceso kmail perché utilizzo il segnale sonoro per leggere le mail appena arrivano. Sfrutto in vari modi il fatto che il pc sia acceso sempre. Per questo mi serve KDE. Ci ho pensato a non usarlo, ma non mi conviene. Poi per programmare sono comode due schermate del compilatore. Sarebbe proprio il caso che funzionasse. Per non parlare del fatto che uso mldonkey per tutti gli utenti della rete. Quando X impazzisce l'accesso web ad mldonkey diventa una cosa di una lentezza pazzesca. Questo difetto è veramente fastidioso.
E poi... il portatile che uso ha mac... ma io al mio KDE ci sono affezionato :D


Last edited by Luc484 on Fri Aug 17, 2007 3:12 pm; edited 1 time in total
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4787
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Fri Aug 17, 2007 5:54 pm    Post subject: Reply with quote

se tu avessi una scheda nvidia, ti chiederei se usi compiz.

prima di aggiungere l'utente al gruppo video avevo problemi analoghi ai tuoi, e quando finalmente ho mangiato la foglia mi sono sentito più leggero.
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 6:01 pm    Post subject: Reply with quote

Compiz è installato (versione 0.5.2), ma non lo carico mai.
Back to top
View user's profile Send private message
to.alex
n00b
n00b


Joined: 08 Apr 2007
Posts: 67

PostPosted: Fri Aug 17, 2007 6:09 pm    Post subject: Reply with quote

Luc484 wrote:
Si, ho KDE con superkaramba sempre attivi. Ho chiuso superkaramba, adesso vedo se così smette di darmi il problema. Però in realtà ho superkaramba da molto più tempo di quanto non si presenti il problema. Comunque sto provando così ora. Grazie mille.


Prima andavo un po' di corsa. Adesso mi dilungo un po' e ti spiego perché ti ho consigliato di eliminare superkaramba.

Tutto nasce da questa segnalazione di bug http://bugs.kde.org/show_bug.cgi?id=138196 che ho fatto quasi un anno fa. Per un po' è finito nel dimenticatoio, in parte anche perché nella fase iniziale (sotto le feste di Natale) non gli ho potuto dare molta attenzione, per poi tornare in voga "by popular vote".

Al momento (io inizialmente ero riuscito ad attribuire la responsabilità di xorg al 100% a kwin) sembra che il responsabile sia superkaramba. Infatti se lo si termina quando il PC diventa inusabile, tutto torna normale. Si può anche terminare kwin (che sembra legato alla cosa), ma poi diventa un casino lanciarne uno nuovo, e comunque non è lui il vero responsabile.

Adesso ho abbandonato quella segnalazione di bug, sia perché non ho più una SuSE su cui smanettare (e su Gentoo fin'ora, grazie a Dio, non ho avuto sto problema), sia per via di quella fase iniziale travagliata (per un po' ho fornito il materiale che mi si chiedeva ma non venivo caxxto, poi mi sono scocciato, perché per l'appunto nel frattempo ero passato a Gentoo).

Stando così le cose, e in previsione di un KDE 4.0 riscritto (quasi) da zero, ho pensato non fosse il caso di insistere e lasciare che il tempo risolva la cosa da se. Ma se vedi che anche nel tuo caso il responsabile è proprio superkaramba, e vuoi, puoi accodarti anche tu alla segnalazione di bug.

Ciao.
Back to top
View user's profile Send private message
cloc3
Advocate
Advocate


Joined: 13 Jan 2004
Posts: 4787
Location: http://www.gentoo-users.org/user/cloc3/

PostPosted: Fri Aug 17, 2007 6:16 pm    Post subject: Reply with quote

.xsession ti dà qualche suggerimento?
_________________
vu vu vu
gentù
mi piaci tu
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 6:49 pm    Post subject: Reply with quote

to.alex wrote:
Al momento (io inizialmente ero riuscito ad attribuire la responsabilità di xorg al 100% a kwin) sembra che il responsabile sia superkaramba. Infatti se lo si termina quando il PC diventa inusabile, tutto torna normale.


Allora sai che faccio? Vista questa cosa io provo invece a tenerlo superkaramba. Appena succede il fattaccio, perché succederà, provo come dici tu a chiudere superkaramba, in modo tale da vedere se effettivamente è lo stesso problema.
Certo che effettivamente se quello è il problema con KDE4 sarà da vedere.
Grazie mille, provo anche questo e faccio sapere.
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Fri Aug 17, 2007 7:01 pm    Post subject: Reply with quote

cloc3 wrote:
.xsession ti dà qualche suggerimento?


Intendi .xsession-errors? Lo sto guardando ora. Orca miseria, ci fossero le date esatte di ciascuna riga forse potrei risalire alle righe relative a qualche ora fa quando si è presentato il problema. Purtroppo non ci sono i timestamp.
Back to top
View user's profile Send private message
exebeje
n00b
n00b


Joined: 18 Aug 2004
Posts: 38

PostPosted: Sat Aug 18, 2007 8:06 am    Post subject: Reply with quote

scusa la banalità, ma è il caso di avere tutta sta roba?

USE="X accessibility acpi addbookmarks aiglx alias alsa amr arts asf authdaemond autoreplace berkdb bitmap-fonts bluetooth branding cairo cdr cli connectionstatus contactnotes cracklib crypt cups dbus dri dvd dvdr dvdread eds emboss encode esd evo fam fasttrack ffmpeg firefox fortran gadu gcj gd gdbm gif gimp gpm groupwise gstreamer gtk hal highlight history iconv ipv6 irc isdnlog jingle jpeg kde kerberos ldap mad midi mikmod mp3 mpeg mudflap musicbrainz ncurses netmeeting nls nowlistening nptl nptlonly nsplugin ogg opengl openmp oss pam pango pcre pdf perl pic png ppds pppd python qt3 qt3support qt4 quicktime readline reflection samba sametime sasl scanner sdk sdl server session sms spell spl ssl statistics svg tcpd texteffect threadsafe tiff translator truetype truetype-fonts type1-fonts unicode usb utempter v4l vorbis webpresence win32codecs winpopup x86 xml xorg xv xvid yahoo zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"

per curiosità hai guardato il system service di kde? Il dubbio è che tu abbia compilato così tanta roba che si appoggia a kde che le routine vanno a mille per i fatti loro. Se poi hai anche "parecchi" pacchetti ~x86....
Insomma, non per spaventarti, ma parrebbe essere un problema di....DEMONI! :twisted:
_________________
"just because you're paranoid it don't mean they're not after you"
Back to top
View user's profile Send private message
Peach
Advocate
Advocate


Joined: 08 Mar 2003
Posts: 3686
Location: London, UK

PostPosted: Sat Aug 18, 2007 8:25 am    Post subject: Reply with quote

per risalire alla fonte del problema inizia a circoscriverlo. aka inizia a vedere se è veramente kde a darti il problema e lancia X puro e semplice oppure con un gestore di finestre minimale (che ne so, tipo fluxbox o wmii).
se il problema si ripresenta è qualcosa legato a X, altrimenti direi senza dubbio che il problema sta in kde...
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom
Back to top
View user's profile Send private message
randomaze
Bodhisattva
Bodhisattva


Joined: 21 Oct 2003
Posts: 9985

PostPosted: Sat Aug 18, 2007 8:40 am    Post subject: Reply with quote

Peach wrote:
...se il problema si ripresenta è qualcosa legato a X...


Qualcosa legato a X mi fa pensare ai driver dela scheda video....
_________________
Ciao da me!
Back to top
View user's profile Send private message
Peach
Advocate
Advocate


Joined: 08 Mar 2003
Posts: 3686
Location: London, UK

PostPosted: Sat Aug 18, 2007 9:00 am    Post subject: Reply with quote

randomaze wrote:
Peach wrote:
...se il problema si ripresenta è qualcosa legato a X...


Qualcosa legato a X mi fa pensare ai driver dela scheda video....


infatti, era quello che pensavo (ma non volevo dirlo)
_________________
Gentoo user since 2004.
"It's all fun and games, until someone loses an eye" - mom
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Sat Aug 18, 2007 9:56 am    Post subject: Reply with quote

exebeje wrote:
scusa la banalità, ma è il caso di avere tutta sta roba?

USE="X accessibility acpi addbookmarks aiglx alias alsa amr arts asf authdaemond autoreplace berkdb bitmap-fonts bluetooth branding cairo cdr cli connectionstatus contactnotes cracklib crypt cups dbus dri dvd dvdr dvdread eds emboss encode esd evo fam fasttrack ffmpeg firefox fortran gadu gcj gd gdbm gif gimp gpm groupwise gstreamer gtk hal highlight history iconv ipv6 irc isdnlog jingle jpeg kde kerberos ldap mad midi mikmod mp3 mpeg mudflap musicbrainz ncurses netmeeting nls nowlistening nptl nptlonly nsplugin ogg opengl openmp oss pam pango pcre pdf perl pic png ppds pppd python qt3 qt3support qt4 quicktime readline reflection samba sametime sasl scanner sdk sdl server session sms spell spl ssl statistics svg tcpd texteffect threadsafe tiff translator truetype truetype-fonts type1-fonts unicode usb utempter v4l vorbis webpresence win32codecs winpopup x86 xml xorg xv xvid yahoo zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci"

per curiosità hai guardato il system service di kde? Il dubbio è che tu abbia compilato così tanta roba che si appoggia a kde che le routine vanno a mille per i fatti loro. Se poi hai anche "parecchi" pacchetti ~x86....
Insomma, non per spaventarti, ma parrebbe essere un problema di....DEMONI! :twisted:


mmh... tu cosa toglieresti scusa? Le flag di USE le ho messe la prima volta che ho installato il sistema, e poi ne ho aggiunte negli anni ogni volta che mi serviva qualcosa, per cui suppongo che mi siano tutte necessarie, anche se a dire il vero adessi come adesso molte non ti so proprio dire neanche cosa siano né per qual motivo fossero state messe.
Ad ogni modo... tu dici che tutte queste USE flag possono portare ad un comportamento del genere, e che non sarebbe un bug né qualche mio errore di configurazione?
Ad ogni modo, cos'è il system service?
Back to top
View user's profile Send private message
Luc484
Veteran
Veteran


Joined: 26 Mar 2005
Posts: 1035
Location: Italy

PostPosted: Sat Aug 18, 2007 10:09 am    Post subject: Reply with quote

Peach wrote:
per risalire alla fonte del problema inizia a circoscriverlo. aka inizia a vedere se è veramente kde a darti il problema e lancia X puro e semplice oppure con un gestore di finestre minimale (che ne so, tipo fluxbox o wmii).
se il problema si ripresenta è qualcosa legato a X, altrimenti direi senza dubbio che il problema sta in kde...


eh, purtroppo non è mica semplice! Avevo provato tempo fa, l'avevo tenuto un paio di giorni così, ma ovviamente è fermo, non fa nulla, ed il sistema è pure inutilizzabile, il che è un tantino scomodo. Il problema può impiegarci anche parecchi giorni prima di mostrarsi, quindi non è tanto facile dire "sicuramente il problema sta in KDE". Tempo fa ero rimasto parecchio solo con X, solo che poi mi serviva il sistema ed ho dovuto riaprire KDE. Però appunto, difficile dire "sicuramente è KDE". Non è un problema molto deterministico. Speravo che ci potesse essere qualche log che potesse darmi una mano a capire il problema.

randomaze wrote:
Qualcosa legato a X mi fa pensare ai driver dela scheda video....


A me pure. E mi era stato anche consigliato. Difatti mesi e mesi fa provai il downgrade, ma non funzionò, poi evidentemente accertato che non era quello il problema tornai a questa versione. In caso posso riprovare, come verifica, ma almeno questo è escluso penso.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Goto page 1, 2, 3  Next
Page 1 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum