View previous topic :: View next topic |
Author |
Message |
mcuddy n00b
Joined: 06 Dec 2004 Posts: 71
|
Posted: Mon Jun 16, 2008 4:50 am Post subject: [Solved] Sound won't work [SiS] AC'97 Sound Controller |
|
|
My audio doesn't work
I configured it with http://www.gentoo.org/doc/en/alsa-guide.xml
# rc-config restart alsasound
Restarting init script
* WARNING: you are stopping a boot service.
* Storing ALSA Mixer Levels ... [ ok ]
* Killing processes using ALSA ... [ ok ]
* Unloading ALSA modules ... [ ok ]
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* Loading: snd-seq ... [ ok ]
* Restoring Mixer Levels ...
# lspci -v | grep -i audio
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
enabled in Menuconfig:
<M> Sound card support
< > Open Sound System (DEPRECATED)
| | <M> Advanced Linux Sound Architecture ¿ ¿
¿ ¿ <M> Sequencer support ¿ ¿
¿ ¿ < > Sequencer dummy client ¿ ¿
¿ ¿ <M> OSS Mixer API ¿ ¿
¿ ¿ <M> OSS PCM (digital audio) API ¿ ¿
¿ ¿ [*] OSS PCM (digital audio) API - Include plugin system ¿ ¿
¿ ¿ [ ] OSS Sequencer API ¿ ¿
¿ ¿ [ ] Dynamic device file minor numbers ¿ ¿
¿ ¿ [ ] Support old ALSA API ¿ ¿
¿ ¿ [ ] Verbose procfs contents ¿ ¿
¿ ¿ [ ] Verbose printk ¿ ¿
¿ ¿ [ ] Debug
<M> Intel/SiS/nVidia/AMD/ALi AC97 Controller
<M> VIA 82C686A/B, 8233/8235 AC97 Controller
alsaconf gives:
intel8x0 Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev
legacy Probe Legasy ISA (non-PnP) chips
I selected intel8x0
Running update-modules...
Loading driver...
* Loading ALSA modules ...
* Loading: snd-card-0 ... [ ok ]
* Loading: snd-pcm-oss ... [ ok ]
* Loading: snd-seq ... [ ok ]
* Restoring Mixer Levels ... [ ok ]
Setting default volumes...
===============================================================================
Now ALSA is ready to use.
For adjustment of volumes, use your favorite mixer.
Have a lot of fun!
All local users are in group "audio"
troubleshooting:
# cat /proc/asound/cards
0 [SI7012 ]: ICH - SiS SI7012
SiS SI7012 with AD1888 at irq 23
# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
# cat /proc/asound/oss/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.15 emulation code)
Kernel: Linux SpeedyX.Cuddy.com 2.6.24-gentoo-r8n #3 PREEMPT Sat May 17 23:29:35 MDT 2008 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
SiS SI7012 with AD1888 at irq 23
Audio devices:
0: SiS SI7012 (DUPLEX)
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers:
0: Analog Devices AD1888
dmesg shows:
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 56831 usecs
intel8x0: measured clock 105 rejected
intel8x0: clocking to 48000
ACPI: PCI interrupt for device 0000:00:02.7 disabled
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
AC'97 0 analog subsections not ready
intel8x0_measure_ac97_clock: measured 50243 usecs
intel8x0: measured clock 119 rejected
intel8x0: clocking to 48000
Alsamixer shows:
┌───────────────────────────────────[AlsaMixer v1.0.16 (Press Escape to quit)]────────────────────────────────────────┐
│ Card: SiS SI7012
│ Chip: Analog Devices AD1888
│ View: [Playback] Capture All
│ Item: Master [dB gain=-12.00, -12.00]
Master: 00 74<>74
Master M: 00 74
Master S: MM
Headphon: 00
PCM: 00 74<>74
Surround: MM
Surround: Shared
Center: MM
LFE: MM
Line: 00 71<>71
Line Jac: 00
CD: 00 71<>71
Mic: MM
Mic Boost: 00
Mic Select: Mic1
Phone: 00 71
IEC958: 00
IEC958 P: 67
IEC958 P: AC-Link
Aux: MM
Channel: 2ch
Downmix: off
Exhange: MM
External: MM
High Pass: 00
Spread F: MM
V_REFOUT: 00
Last edited by mcuddy on Wed Jun 18, 2008 3:58 am; edited 1 time in total |
|
Back to top |
|
|
ewaller Apprentice
Joined: 11 Aug 2005 Posts: 264 Location: Pasadena, CA
|
Posted: Tue Jun 17, 2008 4:56 am Post subject: |
|
|
On my system, the headphone jack sense, line jack sense, and microphone jack sense all report MM, not 00. When I set the headphone jack sense to 00, the audio stops. Try setting it to 'MM' _________________ Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday |
|
Back to top |
|
|
mcuddy n00b
Joined: 06 Dec 2004 Posts: 71
|
Posted: Wed Jun 18, 2008 3:58 am Post subject: |
|
|
YAY!!!! Thank you!!! It worked. |
|
Back to top |
|
|
ewaller Apprentice
Joined: 11 Aug 2005 Posts: 264 Location: Pasadena, CA
|
Posted: Thu Jun 19, 2008 2:13 am Post subject: |
|
|
You are welcome. _________________ Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday |
|
Back to top |
|
|
|