Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Installazione gentoo-macbook
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
nikolis
Tux's lil' helper
Tux's lil' helper


Joined: 21 Aug 2003
Posts: 105
Location: Urbino-Hellas

PostPosted: Tue Jun 12, 2007 9:25 am    Post subject: Installazione gentoo-macbook Reply with quote

Ciao vorrei installare gentoo sul mio macbook
una volta caricato il sistema live non mi permette l'installazione
perche secondo lui non c'e la partizione....
invece winxp riesce ad installarsi.
grazie
Back to top
View user's profile Send private message
djinnZ
Advocate
Advocate


Joined: 02 Nov 2006
Posts: 4831
Location: somewhere in L.O.S.

PostPosted: Tue Jun 12, 2007 11:03 am    Post subject: Reply with quote

:? un tantino generica come richiesta di aiuto. Iniziarei con il dare uno sguardo qui.

Se lo hai già letto ed il problema è che che non ti rileva il disco (ed hai usato un termine improprio) inizia con il postare dmesg.
_________________
scita et risus abundant in ore stultorum sed etiam semper severi insani sunt:wink:
mala tempora currunt...mater stultorum semper pregna est :evil:
Murpy'sLaw:If anything can go wrong, it will - O'Toole's Corollary:Murphy was an optimist :wink:
Back to top
View user's profile Send private message
Cerberos86
Guru
Guru


Joined: 13 Dec 2003
Posts: 581
Location: Padova

PostPosted: Tue Jun 12, 2007 12:47 pm    Post subject: Reply with quote

io ti consiglio vivamente di cercare su gentoo-wiki. C'è una guida completa con tutti i passi e i consigli per l'installazione, dal gestore del boot agli ultimi driver (wifi e webcam comprese)...
Io (e altra gente) hanno installato senza problemi...

Good Luck
_________________
Account jabber: cerberos@jabber.org
"I'm using the hand..." ~ Guybrush Threepwood ~
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Tue Jun 12, 2007 1:39 pm    Post subject: Reply with quote

i mac, come noto, sono macchine particolari. I mac-intel lo sono ancor piu' e a seconda che tu usi bootcamp o altro, dovrai compartarti differentemente... auguri! :twisted:

Coda
Back to top
View user's profile Send private message
Cerberos86
Guru
Guru


Joined: 13 Dec 2003
Posts: 581
Location: Padova

PostPosted: Wed Jun 13, 2007 12:23 am    Post subject: Reply with quote

mah... sinceramente con i mac-tel (come quello in questione) le cose non mi sembrano tanto diverse... l'unica differenza è l'uso dell'EFI non e non del BIOS classico, cosa facilmente risolvibile con ottimi risultati usando refit...

Cheers
_________________
Account jabber: cerberos@jabber.org
"I'm using the hand..." ~ Guybrush Threepwood ~
Back to top
View user's profile Send private message
nikolis
Tux's lil' helper
Tux's lil' helper


Joined: 21 Aug 2003
Posts: 105
Location: Urbino-Hellas

PostPosted: Sat Jun 16, 2007 8:39 am    Post subject: Reply with quote

Scusate il il ritardo
Uso bootcamp ed ho seguito le guide bene ma non capisco dove sbsglio.

gentoo@livecd ~ $ dmesg
Linux version 2.6.19-gentoo-r5 (root@kagome) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Wed Apr 4 05:44:43 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003e0f4000 (usable)
BIOS-e820: 000000003e0f4000 - 000000003e2f5000 (ACPI NVS)
BIOS-e820: 000000003e2f5000 - 000000003eebe000 (ACPI data)
BIOS-e820: 000000003eebe000 - 000000003eeef000 (ACPI NVS)
BIOS-e820: 000000003eeef000 - 000000003ef00000 (ACPI data)
BIOS-e820: 000000003ef00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
96MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 254196) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 254196
early_node_map[1] active PFN ranges
0: 0 -> 254196
On node 0 totalpages: 254196
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 193 pages used for memmap
HighMem zone: 24627 pages, LIFO batch:7
DMI 2.4 present.
ACPI: RSDP (v002 APPLE ) @ 0x000fe020
ACPI: XSDT (v001 APPLE Apple00 0x000000a5 0x01000013) @ 0x3eefd1c0
ACPI: FADT (v003 APPLE Apple00 0x000000a5 Loki 0x0000005f) @ 0x3eefb000
ACPI: HPET (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eefa000
ACPI: MADT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef9000
ACPI: MCFG (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef8000
ACPI: ASF! (v032 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef7000
ACPI: SBST (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef6000
ACPI: ECDT (v001 APPLE Apple00 0x00000001 Loki 0x0000005f) @ 0x3eef5000
ACPI: SSDT (v001 APPLE CpuPm 0x00003000 INTL 0x20050309) @ 0x3eeef000
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050309) @ 0x3eebd000
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050309) @ 0x3eebc000
ACPI: DSDT (v001 APPLE MacBook 0x00020001 INTL 0x20050309) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
Detected 1995.270 MHz processor.
Built 1 zonelists. Total pages: 252211
Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroot initrd=gentoo.igz vga=791 splash=silent,theme:livecd-2007.0 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=gentoo
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0549000 soft=c0529000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 996900k/1016784k available (3162k kernel code, 19176k reserved, 816k data, 236k init, 99280k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04e9000 - 0xc0524000 ( 236 kB)
.data : 0xc0416882 - 0xc04e2894 ( 816 kB)
.text : 0xc0100000 - 0xc0416882 (3162 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Using HPET for base-timer
Calibrating delay using timer specific routine.. 3994.25 BogoMIPS (lpj=19971297)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c054a000 soft=c052a000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.17 BogoMIPS (lpj=19950868)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
Total of 2 processors activated (7984.43 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=22
checking if image is initramfs... it is
Freeing initrd memory: 5327k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 1000-1fff
MEM window: 50200000-502fffff
PREFETCH window: 50500000-505fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: 50100000-501fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: 50000000-500fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1181737818.540:1): initialized
highmem bounce pool size: 64 pages
DLM (built Apr 4 2007 05:42:04) installed
squashfs: version 3.1 (2006/08/19) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Apr 4 2007 05:42:31) installed
Lock_Nolock (built Apr 4 2007 05:42:45) installed
Lock_DLM (built Apr 4 2007 05:42:42) installed
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 3072k, total 16064k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x20b0-0x20b7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x20b8-0x20bf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: MATSHITADVD-R UJ-857D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 236k freed
Time: tsc clocksource has been installed.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0x50445400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00002060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 17, io base 0x00002020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 2-2: configuration #1 chosen from 1 choice
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input0
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input1
input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input2
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
hiddev96: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
input: HID 05ac:1000 as /class/input/input4
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input5
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[50000000-500007ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 2.00 loaded.
ata_piix 0000:00:1f.2: version 2.00ac6
ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
ata_piix 0000:00:1f.2: invalid MAP value 0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x20C8 ctl 0x20EE bmdma 0x20A0 irq 20
ata2: SATA max UDMA/133 cmd 0x20C0 ctl 0x20EA bmdma 0x20A8 irq 20
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0x20CF
ATA: abnormal status 0x7F on port 0x20CF
ata1.01: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.01: ata1: dev 1 multi count 16
ata1.01: configured for UDMA/100
scsi1 : ata_piix
ATA: abnormal status 0x7F on port 0x20C7
scsi 0:0:1:0: Direct-Access ATA FUJITSU MHV2080B 0081 PQ: 0 ANSI: 5
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2d4b0a]
sda1 sda2 sda3
sd 0:0:1:0: Attached scsi disk sda
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
JFS: nTxBlock = 7834, nTxLock = 62674
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
UDF-fs: No partition found (1)
XFS: bad magic number
XFS: SB validate failed
GFS2: Unrecognized block device or mount point /dev/sda<4>GFS2: gfs2 mount does not exist
UDF-fs: No partition found (1)
XFS: bad magic number
XFS: SB validate failed
GFS2: Unrecognized block device or mount point /dev/sda2<4>GFS2: gfs2 mount does not exist
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
GFS2: Unrecognized block device or mount point /dev/sda3<4>GFS2: gfs2 mount does not exist
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 16124K stolen memory.
agpgart: AGP aperture is 256M @ 0x40000000
eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
sd 0:0:1:0: Attached scsi generic sg0 type 0
input: PC Speaker as /class/input/input6
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:01:00.0 to 64
sky2 v1.10 addr 0x50200000 irq 17 Yukon-EC (0xb6) rev 2
sky2 eth1: addr 00:19:e3:62:5a:a4
sky2 eth1: enabling interface
fbsplash: console 0 using theme 'livecd-2007.0'
fbsplash: switched splash state to 'on' on console 0
fbsplash: console 1 using theme 'livecd-2007.0'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'livecd-2007.0'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'livecd-2007.0'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'livecd-2007.0'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'livecd-2007.0'
fbsplash: switched splash state to 'on' on console 5
Bridge firewalling registered
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized i915 1.5.0 20060119 on minor 0
gentoo@livecd ~ $
Back to top
View user's profile Send private message
stefanonafets
l33t
l33t


Joined: 10 Feb 2003
Posts: 644

PostPosted: Wed Jun 20, 2007 4:55 pm    Post subject: Reply with quote

Ok,
saresti in grado di spiegare meglio il problema che incontri?
Che passi fai?
Quali messaggi di errore riscontri?

Quote:

mah... sinceramente con i mac-tel (come quello in questione) le cose non mi sembrano tanto diverse...

Confermo, mi sto trovando benissimo
(mi manca ancora qualche pezzo, ma niente di importante) !!!

La guida su gentoo-wiki segnalata da Cerberos86 la trovi qui: HARDWARE Apple MacBook
_________________
registered Linux user number #411324
sed 's/ke/che/g'

<The Deployment Slave is initializing>
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Mon Dec 03, 2007 12:16 pm    Post subject: Reply with quote

ciao ragazzi, ritiro fuori questa discussione per un problema che sto avendo.
Come saprete, il dual/triple boot secondo bibbia dice che è necessario/consigliabile partizionare da diskutil secondo il comando:

Code:
diskutil /dev/disk0s2 xxG Linux Linux xxG "MS-DOS FAT32" xxG


cosi' da partizionare il disco in 4 partizioni: EFI, OSX, Linux, e DOS/NT

Ora, il problema è che a quanto pare il diskutil di OSX 10.5 non permette piu' la creazione di una partizione di tipo Linux (e infatti, il man diskutil di OSX 10.4 indica come partizioni possibile Linux, Swap, HFS+ etc, mentre il man diskutil di OSX 10.5 indica solo HFS+, FAT32, JFS etc.. senza avere la possibilità di specifica Linux o Swap).

Ora mo', io mi ritrovo, non avendo potuto partizionare come si deve, una partitio table come la seguente:

Code:
codas-macbook:~ coda$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *111.8 Gi   disk0
   1:                        EFI                         200.0 Mi   disk0s1
   2:                  Apple_HFS MacBook                 70.9 Gi    disk0s2
   3:       Microsoft Basic Data                         34.5 Gi    disk0s3
   4:       Microsoft Basic Data BOOTCAMP                6.2 Gi     disk0s4


mentre il partition inspector di rEFIt dichiara:

Code:
*** Report for internal hard disk ***

Current GPT partition table:
 #      Start LBA      End LBA  Type
 1             40       409639  EFI System (FAT)
 2         409640    149045287  Mac OS X HFS+
 3      149045288    221449463  Basic Data
 4      221449464    234441607  Basic Data

Current MBR partition table:
 # A    Start LBA      End LBA  Type
 1              1       409639  ee  EFI Protective
 2         409640    149045287  af  Mac OS X HFS+
 3      149045288    221449463  83  Linux
 4 *    221449464    234441607  07  NTFS/HPFS

MBR contents:
 Boot Code: Unknown, but bootable

Partition at LBA 40:
 Boot Code: None (Non-system disk message)
 File System: FAT32
 Listed in GPT as partition 1, type EFI System (FAT)

Partition at LBA 409640:
 Boot Code: None
 File System: Unknown
 Listed in GPT as partition 2, type Mac OS X HFS+
 Listed in MBR as partition 2, type af  Mac OS X HFS+

Partition at LBA 149045288:
 Boot Code: None
 File System: XFS
 Listed in GPT as partition 3, type Basic Data
 Listed in MBR as partition 3, type 83  Linux

Partition at LBA 221449464:
 Boot Code: Windows NTLDR
 File System: NTFS
 Listed in GPT as partition 4, type Basic Data
 Listed in MBR as partition 4, type 07  NTFS/HPFS, active


E, ovviamente, nonostante tutto sia andato alla meglio, Gentoo non viene manco indicata da rEFIt come possibile OS :?

sospetto che il problema sia che la partizione dedicata a Gentoo viene vista come Microsoft Basic da GPT, ma non posso fare una controprova, non avendo al momento modo di testare un partizionamento con il diskutil di OSX 10.4

Qualcuno potrebbe mica postarmi i comandi "diskutil list" e "partition inspector", cosi' da verificare cosa ci sia di diverso ?

Coda
Back to top
View user's profile Send private message
celine
n00b
n00b


Joined: 11 Jan 2005
Posts: 60
Location: Italy->Florence

PostPosted: Sun Dec 16, 2007 12:49 pm    Post subject: Reply with quote

io ho una gentoo su un ibook g4 installata ormai da molto tempo.
Per creare le partizioni ho utilizzato parted dal live cd... forse puoi usarlo anche tu
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Sun Dec 16, 2007 1:27 pm    Post subject: Reply with quote

celine wrote:
io ho una gentoo su un ibook g4 installata ormai da molto tempo.
Per creare le partizioni ho utilizzato parted dal live cd... forse puoi usarlo anche tu


no, l'ibook g4 è per l'appunto un ppc, e non segue il partizionamento GUID per i mac-intel (non ha la EFI, tanto per dire)

Coda
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Mon Dec 17, 2007 12:39 pm    Post subject: Reply with quote

oookey: ne sto venedo a capo.
Innanzitutto: sembra impossibile partizionare un macbook3,1 con i tool di Tiger. Seconda cosa: a quanto apre il problema è XFS: alcuni dichiarano che XFS è incompatibile con lilo, altri che sia incompatibile con grub, fatto sta che grub non mi rompe le scatole per installarsi su xfs, ma al riavvio non v'e' traccia del sistema operativo (cosa che, ad esempio, non avviene su un pc)

A questo punto sono riuscito a fare un triplo boot usando grub, ma dovendo accontentarmi di ext3.

Coda
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....

PostPosted: Mon Dec 17, 2007 1:02 pm    Post subject: Reply with quote

codadilupo wrote:
oookey: ne sto venedo a capo.
Innanzitutto: sembra impossibile partizionare un macbook3,1 con i tool di Tiger. Seconda cosa: a quanto apre il problema è XFS: alcuni dichiarano che XFS è incompatibile con lilo, altri che sia incompatibile con grub, fatto sta che grub non mi rompe le scatole per installarsi su xfs, ma al riavvio non v'e' traccia del sistema operativo (cosa che, ad esempio, non avviene su un pc)

A questo punto sono riuscito a fare un triplo boot usando grub, ma dovendo accontentarmi di ext3.

Coda


sei sicuro che si tratti di XFS???? io ho su tutte partizioni XFS è nessun problema.....
Back to top
View user's profile Send private message
CarloJekko
Veteran
Veteran


Joined: 31 Mar 2005
Posts: 1315
Location: Baia Domizia :-)

PostPosted: Mon Dec 17, 2007 1:25 pm    Post subject: Reply with quote

Vado un po su OT, ma ho sto dubbio da molto... se io avvesi il cd di installazione di LEOPARD... lo riuscerei ad installare sul mio computer (intel duo ecc.) ? E se inserissi l'hard disk di un mac-intel nel mio pc... partirebbe ??
_________________
C.
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Mon Dec 17, 2007 5:03 pm    Post subject: Reply with quote

crisandbea wrote:
sei sicuro che si tratti di XFS???? io ho su tutte partizioni XFS è nessun problema.....


tu hai un triplo o un doppio boot ? anche la /boot è XFS ? Il portatile è stato partizionato da OSX 10.5 o da OSX 10.4 ?

Sono tutte variabili non da poco, a quanto pare ;-)

Coda


Last edited by codadilupo on Mon Dec 17, 2007 5:05 pm; edited 1 time in total
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Mon Dec 17, 2007 5:04 pm    Post subject: Reply with quote

CarloJekko wrote:
Vado un po su OT, ma ho sto dubbio da molto... se io avvesi il cd di installazione di LEOPARD... lo riuscerei ad installare sul mio computer (intel duo ecc.) ? E se inserissi l'hard disk di un mac-intel nel mio pc... partirebbe ??


è decisamente una violazione dello SLA Apple, ma esisteono degli hack che ti permettono di farlo, a patto che tu abbia macchine con caratteristiche specifiche. Leggi del progetto osx86.org per saperne di piu'.

Coda
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....

PostPosted: Mon Dec 17, 2007 5:14 pm    Post subject: Reply with quote

codadilupo wrote:
crisandbea wrote:
sei sicuro che si tratti di XFS???? io ho su tutte partizioni XFS è nessun problema.....


tu hai un triplo o un doppio boot ? anche la /boot è XFS ? Il portatile è stato partizionato da OSX 10.5 o da OSX 10.4 ?

Sono tutte variabili non da poco, a quanto pare ;-)

Coda


doppio boot, la /boot è anch'essa xfs, è stato partizionato da OSX 10.4, dopo aver smadornato un pò però, ho seguito un pò di guide in giro, ed alla fine è andato tutto, ho utilizzato Bootcamp per partizionare, cosi come se volessi installare Windows, però quando viene richiesto il cd di Windows ho messo quello di Gentoo, dopo andando in un altro terminale(con ctrl+f2) ho installato refit per sincronizzare la partition table sul gpt e sull'mbr.

nb:il macbook era ancora immacolato, quindi se facevo danni non avrei perso nessun dato. ho provato ed è andato.

ciauz
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Mon Dec 17, 2007 5:41 pm    Post subject: Reply with quote

insomma: è tutto diverso ;-)

Il partizionamento lo faccio da leopard (anche perchè se lo faccio da parted comunque leopard mi dice che devo riformattare), metto su un triplo boot e ho una sola partizione a disposizione (e finchè ho tentato di tenermi xfs non ne ha voluto sapere di partire).
l'unica cosa in comune è la marca del produttore e il fatto che usiamo entrambi rEFIt ;-)

Ad ogni modo, visto che anche il mio è ancora immacolato, posso smanacciare quanto voglio, e penso che provero' a fare 5 partizioni primarie.
Suppongo che se lascio che la 4a partizione sia Xp, e metto la terza di 50Mb con solo /boot poi grub non abbia problemi a farmi partire la quinta partizione di / ...

vedremo!

Coda
Back to top
View user's profile Send private message
crisandbea
Veteran
Veteran


Joined: 03 Jul 2005
Posts: 1778
Location: BOSCO (SA) ... ma domiciliato a Bologna....

PostPosted: Mon Dec 17, 2007 7:00 pm    Post subject: Reply with quote

codadilupo wrote:
insomma: è tutto diverso ;-)

Il partizionamento lo faccio da leopard (anche perchè se lo faccio da parted comunque leopard mi dice che devo riformattare), metto su un triplo boot e ho una sola partizione a disposizione (e finchè ho tentato di tenermi xfs non ne ha voluto sapere di partire).
l'unica cosa in comune è la marca del produttore e il fatto che usiamo entrambi rEFIt ;-)

Ad ogni modo, visto che anche il mio è ancora immacolato, posso smanacciare quanto voglio, e penso che provero' a fare 5 partizioni primarie.
Suppongo che se lascio che la 4a partizione sia Xp, e metto la terza di 50Mb con solo /boot poi grub non abbia problemi a farmi partire la quinta partizione di / ...

vedremo!

Coda


prova a dare uno sguardo qui anche se probabilmente lo hai già guardato.

ciauz
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Mon Dec 17, 2007 7:54 pm    Post subject: Reply with quote

crisandbea wrote:
prova a dare uno sguardo qui anche se probabilmente lo hai già guardato.


ehehe, ovviamente, è stato il primo link ;-)

Coda
Back to top
View user's profile Send private message
=DvD=
Veteran
Veteran


Joined: 25 Mar 2004
Posts: 1353

PostPosted: Wed Dec 19, 2007 1:00 pm    Post subject: Reply with quote

Io su un macbook pro ho usato refit come boot loader, e poi mi sono partizionato il disco con gparted da livecd.
Non vedo perche' usare i tools di apple quando quelli nostrani funzionano (meglio) :)
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Wed Dec 19, 2007 1:40 pm    Post subject: Reply with quote

=DvD= wrote:
Io su un macbook pro ho usato refit come boot loader, e poi mi sono partizionato il disco con gparted da livecd.
Non vedo perche' usare i tools di apple quando quelli nostrani funzionano (meglio) :)


Perchè - e non ne so il motivo - se partiziono direttamente da gparted, senza aver prima creato la partizione da diskutil, poi diskutil non funziona piu :-P
Tra l'altro, gparted non è in grado di ridimensionare hfs+ case-sensitivie journaled, per cui è giocoforza farlo da diskutil

P.S.: comunque il problema era riuscire ad usare XFS su /boot, non partizionare il disco... e ad ogni modo, ora il triplo boot funziona :-P

Coda
Back to top
View user's profile Send private message
=DvD=
Veteran
Veteran


Joined: 25 Mar 2004
Posts: 1353

PostPosted: Wed Dec 19, 2007 2:51 pm    Post subject: Reply with quote

codadilupo wrote:

Tra l'altro, gparted non è in grado di ridimensionare hfs+ case-sensitivie journaled, per cui è giocoforza farlo da diskutil


Mi ero scordato del case sentisiive.
Cmq diskutil non funziona piu' neeno a me (ho il triplo boot), ma me ne sono fregato con l'idea che non lo uso (gparted) e che prima o poi facciano un aggiornamento che lo sistemi. :)
Back to top
View user's profile Send private message
codadilupo
Advocate
Advocate


Joined: 05 Aug 2003
Posts: 3135

PostPosted: Wed Dec 19, 2007 10:07 pm    Post subject: Reply with quote

=DvD= wrote:
codadilupo wrote:

Tra l'altro, gparted non è in grado di ridimensionare hfs+ case-sensitivie journaled, per cui è giocoforza farlo da diskutil


Mi ero scordato del case sentisiive.
Cmq diskutil non funziona piu' neeno a me (ho il triplo boot), ma me ne sono fregato con l'idea che non lo uso (gparted) e che prima o poi facciano un aggiornamento che lo sistemi. :)


Eh, ma da quel che m'e' parso di capire, diskutil non funziona perchè non riconosce il partizionamento hibrido GUID/MBR
Facendo come ho fatto, ho perso la possibilità di usare xfs (anche se sembra che ci sia chi c'e' riuscito ;-)), pero' ho la partition table apposto e posso ridimensionare sia hfs+ che ntfs che ext3 (il primo da diskutl, gl'altri da parted ;-))

Ovviamente il pc era intonso, e ho potuto smanacciare due settimane prima di poter - finalmente - scrivere questo post da gentoo ;-)

P.S.: grazie a peach, questo è il mio rEFIt :-P

Coda
Back to top
View user's profile Send private message
=DvD=
Veteran
Veteran


Joined: 25 Mar 2004
Posts: 1353

PostPosted: Fri Dec 21, 2007 7:12 pm    Post subject: Reply with quote

Che figo :)
Il mio ha il pinguino classico :)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum