Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[radeon 7000] problème de configuration
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
FredM
n00b
n00b


Joined: 14 May 2007
Posts: 5

PostPosted: Mon May 14, 2007 9:35 pm    Post subject: [radeon 7000] problème de configuration Reply with quote

Bonjour,

J'ai voulu installer Gnome sur ma Gentoo en suivant la doc
http://www.gentoo.org/doc/fr/gnome-config.xml

Au lancement de startx, j'ai le message suivant :
Quote:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.6.19-gentoo-r5 i686
Current Operating System: Linux localhost 2.6.19-gentoo-r5 #1 SMP Wed Apr 25 16:52:08 CEST 2007 i686
Build Date: 13 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 15 01:28:56 2007
(==) Using config file: "/etc/X11/xorg.conf"

(EE) No devices detected.

Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.


A priori, il me faut renseigner le xorg.conf.
Je suis allé voir la page : http://www.gentoo.org/doc/fr/xorg-config.xml
mais le
Code:
 Xorg -configure

me donne le message d'erreur suivant :

Quote:
Build Operating System: Linux 2.6.19-gentoo-r5 i686
Current Operating System: Linux localhost 2.6.19-gentoo-r5 #1 SMP Wed Apr 25 16:52:08 CEST 2007 i686
Build Date: 13 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 15 01:30:32 2007
List of video drivers:
ark
tseng
fglrx
v4l
s3virge
vmware
nv
neomagic
i740
i128
siliconmotion
dummy
voodoo
apm
i810
trident
cirrus
mga
sisusb
savage
chips
via
nsc
rendition
glint
tga
s3
cyrix
tdfx
imstt
sis
fbdev
vesa
vga

Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80c0264]
1: [0xb7ef7420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x121) [0xb750ace1]
3: Xorg(DoConfigure+0x208) [0x80b1558]
4: Xorg(InitOutput+0x685) [0x809fc65]
5: Xorg(main+0x27b) [0x806e3eb]
6: /lib/libc.so.6(__libc_start_main+0xd8) [0xb7caf878]
7: Xorg(FontFileCompleteXLFD+0xa5) [0x806d921]

Fatal server error:
Caught signal 11. Server aborting


Je ne sais pas comment configurer ce xorg.conf pour ma carte qui est une Radeon 7000.

Dans le make.conf, j'ai mis :
VIDEO_CARDS="fglrx"

Merci de votre aide

Fred


Last edited by FredM on Wed May 16, 2007 6:17 am; edited 1 time in total
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Mon May 14, 2007 10:04 pm    Post subject: Reply with quote

Salut et bienvenue,
Cela semble être un problème de driver...es tu sûr d'avoir installé les drivers propriétaires ATI ? En effet "fglrx" est le nom de ces drivers...essaie déjà avec "vesa" à la place de fglrx ça devrait mieux marcher (mais ça sera pas beau...) et ensuite consultes cette doc là :
http://www.gentoo.org/doc/fr/ati-faq.xml
ça devrait t'aider à faire marcher ta carte :wink:

EDIT: si je comprends bien la doc ta carte (radeo 7000 = R100) n'est pas supporté par le pilote proprio...il faut que tu utilises soit les modules du noyau, soit le paquet x11-drm
(Pour le support Radeon.)
(R100, R200, R250, R280, mais pas R300.)
# VIDEO_CARDS="radeon" emerge x11-drm

_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
_droop_
l33t
l33t


Joined: 30 May 2004
Posts: 957

PostPosted: Tue May 15, 2007 7:39 am    Post subject: Reply with quote

gglaboussole wrote:
(Pour le support Radeon.)
(R100, R200, R250, R280, mais pas R300.)
# VIDEO_CARDS="radeon" emerge x11-drm


Salut,

Je ne sais pas d'où provient ce message. Mais les R300 sont supportés par le driver radéon de xorg-x11 (enfin c'est pas encore parfait mais ça progresse).

Par contre les R400 et les R500 ne le sont pas.

Voilà pour la précision qui n'avait pas grand chose à voir :wink:
Back to top
View user's profile Send private message
FredM
n00b
n00b


Joined: 14 May 2007
Posts: 5

PostPosted: Tue May 15, 2007 9:30 pm    Post subject: Reply with quote

Merci pour vos réponses.
Ma carte est une Radeon 7000 AGP 32 Mb
L'écran 1024x768 32bits 60 Hz

J'ai mis dans le make.conf :
VIDEO_CARDS="radeon"
(le vesa ne passait pas mieux)

et fait un emerge x11-drm

Le lancement de xorgcfg me donne comme pour le X -configure
Quote:

Fatal server error:
Caught signal 11. Server aborting


Il me reste donc xorgconfig.
Je rentre mes paramètres mais le startx ne fonctionne pas mieux

Quote:

Build Date: 13 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 16 01:11:55 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "radeon" (module does not exist, 0)
(EE) No drivers available.

Fatal server error:
no screens found

XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.



Je ne sais pas comment m'en sortir (je suis un novice sous Linux)

Fred
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Tue May 15, 2007 10:30 pm    Post subject: Reply with quote

peux tu poster ton xorg.conf , la sortie entière de ton log de X qui se trouve dans /var/log/Xorg.0.log ainsi que le résutat de emerge -pv xorg-server (afin de voir les USE que tu as d'activées)
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
FredM
n00b
n00b


Joined: 14 May 2007
Posts: 5

PostPosted: Tue May 15, 2007 11:04 pm    Post subject: Reply with quote

Alors voilà mon xorg.conf
Quote:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"

# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# RgbPath "/usr/share/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

FontPath "/usr/share/fonts/misc/"
# FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Mouse-speed setting for PS/2 mouse.

# Option "Resolution" "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

Option "ZAxisMapping" "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Likom"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 31.5 - 48.5

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
Identifier "Radeon7000"
Driver "radeon"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Radeon7000"
Monitor "Likom"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
# Mode 0666
# EndSection


Mon Xorg0.log

[code]

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux 2.6.19-gentoo-r5 i686
Current Operating System: Linux localhost 2.6.19-gentoo-r5 #1 SMP Wed Apr 25 16:52:08 CEST 2007 i686
Build Date: 13 May 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 16 01:13:51 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c5660
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 10b9,5459 card 10a5,5459 rev 00 class 07,03,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1462,7120 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1462,7120 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1462,7120 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1462,7120 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1462,7120 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,7120 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,515a card 17af,2001 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xcfd00000 - 0xdfcfffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon RV100 QZ [Radeon 7000/VE] rev 0, Mem @ 0xd0000000/27, 0xdfef0000/16, I/O @ 0xc800/8, BIOS @ 0xdfec0000/17
List of video drivers:
ark
tseng
fglrx
v4l
s3virge
vmware
nv
neomagic
i740
i128
siliconmotion
dummy
voodoo
apm
i810
trident
cirrus
mga
sisusb
savage
chips
via
nsc
rendition
glint
tga
s3
cyrix
tdfx
imstt
sis
fbdev
vesa
vga
(II) LoadModule: "ark"
(II) Loading /usr/lib/xorg/modules/drivers//ark_drv.so
(II) Module ark: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.6.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "tseng"
(II) Loading /usr/lib/xorg/modules/drivers//tseng_drv.so
(II) Module tseng: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.32.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "v4l"
(II) Loading /usr/lib/xorg/modules/drivers//v4l_drv.so
(II) Module v4l: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.1
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "s3virge"
(II) Loading /usr/lib/xorg/modules/drivers//s3virge_drv.so
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vmware"
(II) Loading /usr/lib/xorg/modules/drivers//vmware_drv.so
(II) Module vmware: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 10.15.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "neomagic"
(II) Loading /usr/lib/xorg/modules/drivers//neomagic_drv.so
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "i740"
(II) Loading /usr/lib/xorg/modules/drivers//i740_drv.so
(II) Module i740: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "i128"
(II) Loading /usr/lib/xorg/modules/drivers//i128_drv.so
(II) Module i128: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib/xorg/modules/drivers//siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dummy"
(II) Loading /usr/lib/xorg/modules/drivers//dummy_drv.so
(II) Module dummy: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "voodoo"
(II) Loading /usr/lib/xorg/modules/drivers//voodoo_drv.so
(II) Module voodoo: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "apm"
(II) Loading /usr/lib/xorg/modules/drivers//apm_drv.so
(II) Module apm: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.7.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "trident"
(II) Loading /usr/lib/xorg/modules/drivers//trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/xorg/modules/drivers//cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "mga"
(II) Loading /usr/lib/xorg/modules/drivers//mga_drv.so
(II) Module mga: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.4.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "sisusb"
(II) Loading /usr/lib/xorg/modules/drivers//sisusb_drv.so
(II) Module sisusb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 2.1.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "chips"
(II) Loading /usr/lib/xorg/modules/drivers//chips_drv.so
(II) Module chips: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "via"
(II) Loading /usr/lib/xorg/modules/drivers//via_drv.so
(II) Module via: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "nsc"
(II) Loading /usr/lib/xorg/modules/drivers//nsc_drv.so
(II) Module nsc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 2.8.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "rendition"
(II) Loading /usr/lib/xorg/modules/drivers//rendition_drv.so
(II) Module rendition: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "glint"
(II) Loading /usr/lib/xorg/modules/drivers//glint_drv.so
(II) Module glint: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "tga"
(II) Loading /usr/lib/xorg/modules/drivers//tga_drv.so
(II) Module tga: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "s3"
(II) Loading /usr/lib/xorg/modules/drivers//s3_drv.so
(II) Module s3: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.5.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "cyrix"
(II) Loading /usr/lib/xorg/modules/drivers//cyrix_drv.so
(II) Module cyrix: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "tdfx"
(II) Loading /usr/lib/xorg/modules/drivers//tdfx_drv.so
(II) Module tdfx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "imstt"
(II) Loading /usr/lib/xorg/modules/drivers//imstt_drv.so
(II) Module imstt: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.3.1
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vga"
(II) Loading /usr/lib/xorg/modules/drivers//vga_drv.so
(II) Module vga: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 4.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.1
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[1] -1 0 0xdfffe000 - 0xdfffefff (0x1000) MX[B]
[2] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[5] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[8] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[9] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[10] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[11] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[1] -1 0 0xdfffe000 - 0xdfffefff (0x1000) MX[B]
[2] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[3] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[4] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[5] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[7] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[8] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[9] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[10] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[11] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[14] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xdffffe00 - 0xdffffeff (0x100) MX[B]
[5] -1 0 0xdfffe000 - 0xdfffefff (0x1000) MX[B]
[6] -1 0 0xdfffff00 - 0xdfffffff (0x100) MX[B]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[8] -1 0 0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
[9] -1 0 0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
[10] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[14] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[15] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[18] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[20] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.32.5
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.32g1
(II) ATI Proprietary Linux Driver Build Date: Dec 12 2006 17:18:27
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.32.2.1.2.3-driver-lnx-x86-x86_64-313294

Backtrace:
0: X(xf86SigHandler+0x84) [0x80c0264]
1: [0xb7f4f420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x121) [0xb7562ce1]
3: X(DoConfigure+0x208) [0x80b1558]
4: X(InitOutput+0x685) [0x809fc65]
5: X(main+0x27b) [0x806e3eb]
6: /lib/libc.so.6(__libc_start_main+0xd8) [0xb7d07878]
7: X(FontFileCompleteXLFD+0xa5) [0x806d921]

Fatal server error:
Caught signal 11. Server aborting
Quote:


et enfin le résutat de emerge -pv xorg-server

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild R ] x11-base/xorg-server-1.2.0-r3 USE="dri ipv6 xorg -3dfx -debug -dmx -kdrive -minimal -nptl -sdl -xprint" INPUT_DEVICES="keyboard mouse -acecad -aiptek -calcomp -citron -digitaledge -dmc -dynapro -elo2300 -elographics -evdev* -fpit -hyperpen -jamstudio -joystick -magellan -microtouch -mutouch -palmax -penmount -spaceorb -summa -synaptics -tek4957 -ur98 -vmmouse -void -wacom" VIDEO_CARDS="radeon* -apm* -ark* -chips* -cirrus* -cyrix* -dummy* -epson -fbdev* -fglrx -glint* -i128* -i740* -i810* (-impact) -imstt* -mach64 -mga* -neomagic* (-newport) -nsc* -nv* -nvidia -r128 -rendition* -s3* -s3virge* -savage* -siliconmotion* -sis* -sisusb* (-sunbw2) (-suncg14) (-suncg3) (-suncg6) (-sunffb) (-sunleo) (-suntcx) -tdfx* -tga* -trident* -tseng* -v4l* -vesa* -vga* -via* -vmware* -voodoo*" 0 kB
[ebuild N ] x11-drivers/xf86-video-ati-6.6.3 USE="dri -debug" 707 kB

Total: 2 packages (1 new, 1 reinstall), Size of downloads: 707 kB


Merci

Fred
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Wed May 16, 2007 5:38 am    Post subject: Reply with quote

une réponse rapide car je me lève juste et je pars au boulot.....: la présence de l' "*" dans VIDEO_CARDS="radeon* résultat de emerge -pv xorg-xerver montre que si tu as bien modifié la variable du make.conf tu n'as en revanche pas recompilé ton xorg-server...(l'astérisque montre les nouvelles use que tu viens juste d'activer...) .c'est indispendable de le faire si tu veux que ton serveur X soit compilé avec le support de ton driver...il te suffit de lancer un emerge -uDN world mais avant, tant qu'à faire, rajoute également "vesa" à ton make.conf pour l'avoir en tant que driver de secours....je regarderais ça plus en détail jeudi..A+ :wink:

EDIT: de plus je te conseille de modifier ton titre (en allant sur ton premier post) et de mettre un truc du style [radeon 7000] problème de configuration afin qu'il accroche le regard des spécialistes de ces types de cartes (suis nvidia moi :) ) car ton xorg.conf, notamment pour la section modules ne me parait pas top top....
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
kwenspc
Advocate
Advocate


Joined: 21 Sep 2003
Posts: 4954

PostPosted: Wed May 16, 2007 8:42 am    Post subject: Reply with quote

hum les drivers drm sont depuis pas mal de temps intégrés au noyau et fonctionnent très bien. pas besoin d'emerge x11-drm donc. Suffit d'aller dans Device Drivers -> Characters Devices et là :
d'énabler l'agpgart, de selectionner le bon driver agp (selon sa carte mère), d'enabler le support dri de x11 et de selectionre ati radeon.
Alors le tou soit en module soit en dur. Perso je mets en modules dans ce cas là. Et sinon oui dans le xorg.conf on met "radeon" comme driver, on load dri, drm et on oublis pas la section dri à décommenter et voilà.
_________________
membre officieux du SAV Ati GEntoo
Back to top
View user's profile Send private message
d2_racing
Bodhisattva
Bodhisattva


Joined: 25 Apr 2005
Posts: 13047
Location: Ste-Foy,Canada

PostPosted: Wed May 16, 2007 11:35 am    Post subject: Reply with quote

Peux-tu poster ton emerge --info s.v.p.

Tu as peux-tu quelque chose qui cloche dans ton /etc/make.conf...
Back to top
View user's profile Send private message
babos
Tux's lil' helper
Tux's lil' helper


Joined: 15 Feb 2006
Posts: 144
Location: Martinique

PostPosted: Wed May 16, 2007 3:10 pm    Post subject: Reply with quote

Et sinon, un détail, puisqu'apparemment ton écran ne tourne pas sous la résolution 1280x1024, je crois, mais je n'en suis pas sûr, que tu devrait retirer cette résolution de tes subsection "display" dans la section "screen" de ton xorg.conf
_________________
Quand le sage montre le ciel, l'idiot regarde son doigt.
Back to top
View user's profile Send private message
FredM
n00b
n00b


Joined: 14 May 2007
Posts: 5

PostPosted: Thu May 17, 2007 2:01 pm    Post subject: Reply with quote

Bon alors voilà, j'ai lancé un emerge -uDN mais échec :
Quote:
* checking ebuild checksums ;-) ... [ ok ]
* checking auxfile checksums ;-) ... [ ok ]
* checking miscfile checksums ;-) ... [ ok ]
* checking glibc-2.3.6.tar.bz2 ;-) ... [ ok ]
* checking glibc-linuxthreads-2.3.6.tar.bz2 ;-) ... [ ok ]
* checking glibc-libidn-2.3.6.tar.bz2 ;-) ... [ ok ]
* checking glibc-2.3.6-patches-1.19.tar.bz2 ;-) ... [ ok ]
* checking glibc-manpages-2.3.6-1.tar.bz2 ;-) ... [ ok ]
* checking glibc-infopages-2.3.6.tar.bz2 ;-) ... [ ok ]
* Sanity check to keep you from breaking your system:
* Downgrading glibc is not supported and a sure way to destruction

!!! ERROR: sys-libs/glibc-2.3.6-r5 failed.
Call stack:
ebuild.sh, line 1630: Called dyn_setup
ebuild.sh, line 702: Called qa_call 'pkg_setup'
ebuild.sh, line 38: Called pkg_setup
glibc-2.3.6-r5.ebuild, line 1037: Called die

!!! aborting to save your system
!!! If you need support, post the topmost build error, and the call stack if relevant.
!!! A complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.3.6-r5/temp/build.log'.



Je n'ai pas su où rajouter "vesa" à mon make.conf pour l'avoir en tant que driver de secours :
Il me mettre dans le make.conf les 2 lignes suivantes ?
Quote:
VIDEO_CARDS="radeon"
VIDEO_CARDS="vesa"



Je vais tester les autres pistes et envoyer un emerge -info

Fred
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Thu May 17, 2007 4:46 pm    Post subject: Reply with quote

*comment ce fait il qu'il veuille te downgrader ta glibc à la glibc 2 2.3.6-r5 ? la version stable actuelle est la 2.5-r2.... ? A mon avis tu aurais besoin de faire emerge --sync avant ton emerge -uDN world...(un emerge -uDNpv world serait mieux d'ailleurs avant de le faire en réel pour voir ce qu'il veut te faire...il ne doit pas te downgrader de paquets, surtout pas la glibc !) et de lire la suite de la doc de l'insatllation intitulée "que faire ensuite?" où le fonctionnement de portage est détaillé et expliqué...

*Recompile xorg-server après avoir mis VIDEO_CARDS="radeon vesa" dans ton make.conf , tout simplement

*Ecoutes les conseils de kwenspc, vu sa signature je pense qu'il sait de quoi il parle ! Tu n'aurais donc pas besoin du paquet x11-drm, le driver étant parfaitement géré par le noyau : donc emerge -C x11-drm et va voir dans ton noyau et :
Quote:
Suffit d'aller dans Device Drivers -> Characters Devices et là :
d'énabler l'agpgart, de selectionner le bon driver agp (selon sa carte mère), d'enabler le support dri de x11 et de selectionre ati radeon.


si la compilation du noyau te pose problème fais moi un pm je veux bien t'aider...

*enfin ton emerge --info ne serait pas du luxe en effet car cette tentative de downgrader ta glibc est bizarre..
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
FredM
n00b
n00b


Joined: 14 May 2007
Posts: 5

PostPosted: Thu May 17, 2007 5:43 pm    Post subject: Reply with quote

Salut,

En fait j'ai installé les patchs de la Release 2 d'OVH pour avoir le même poste que mon Kimsufi et me faire la main à la maison. Cela explique peut-être ce pb de version de glibc...
Question bête mais on recompile comment le xorg-server ?

Autre question du même type, après le emerge -C x11-drm, je ne sais pas où aller voir dans mon noyau... donc la compilation me posera également pb ;))

Voici mon emerge --info :

Quote:

emerge --info
Portage 2.1.2.2 (default-linux/x86/2006.1/desktop, gcc-4.1.1, glibc-2.4-r3, 2.6.19-gentoo-r5 i686)
=================================================================
System uname: 2.6.19-gentoo-r5 i686 AMD Athlon(tm) XP
Gentoo Base System release 1.12.9
Timestamp of tree: Sun, 29 Apr 2007 08:50:01 +0000
dev-lang/python: 2.4.3-r4
dev-python/pycrypto: 2.0.1-r5
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.13, 2.61
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.16.1-r3
sys-devel/gcc-config: 1.3.15-r1
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.17-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb"
CONFIG_PROTECT_MASK="/etc/env.d /etc/gconf /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="distlocks metadata-transfer sfperms strict"
GENTOO_MIRRORS="http://mirror.ovh.net/gentoo-distfiles ftp://mirror.ovh.net/gentoo-distfiles"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/portage/local/layman/ovh /usr/portage/local/layman/ovh /usr/portage/local/layman/ovh /usr/portage/local/layman/ovh /usr/portage/local/layman/ovh /usr/portage/local/layman/ovh"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="X alsa berkdb bitmap-fonts cairo cdr cli cracklib crypt cups dbus dri dvd dvdr eds emboss encode esd fam firefox fortran gdbm gif gnome gpm gstreamer gtk hal iconv ipv6 isdnlog jpeg latin1 ldap libg++ mad midi mikmod mmx mp3 mpeg ncurses nls nptlonly ogg opengl oss pam pcre perl png ppds pppd python quicktime readline reflection session spell spl sse sse2 ssl tcpd tk truetype truetype-fonts type1-fonts unicode vorbis win32codecs x86 xml xorg xv zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" ELIBC="glibc" INPUT_DEVICES="keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="radeon"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS



Merci

Fred
Back to top
View user's profile Send private message
gglaboussole
l33t
l33t


Joined: 17 May 2005
Posts: 641
Location: Monbalen (47),France

PostPosted: Thu May 17, 2007 6:22 pm    Post subject: Reply with quote

j'en reviens à ce que je te disais plus haut....lis la doc !

Je veux bien t'aider mais il faut un minimum de recherches de ta part et d'acquisition de connaissance que personne ne pourra faire pour toi !
pour recompiler xorg-server il te suffit de le réemerger : emerge -1 xorg-server (le -1 pour eviter de polluer ton fichier world, il devrait ainsi le recompiler avec le support des drivers video indiqués dans ton make.conf : radeon et vesa si tu l'a mis)
pour recompiler ton noyau :
http://www.gentoo.org/doc/fr/handbook/handbook-x86.xml?part=1&chap=7
http://www.gentoo.org/doc/fr/gentoo-kernel.xml
http://www.gentoo.org/doc/fr/kernel-config.xml

Edit : sinon ton emerge --info montre que tu utilises encore le profile 2006.0
donc fait un emerge --sync
ensuite eselect profile list (te donnera la liste des profiles avec un numéro devant)
ensuite eselect profile set ...le numéro du profile 2007.0 desktop
ensuite emerge -uDN world et ton système sera à jour pour poursuivre sur de bonnes bases
_________________
On m'a dit que la terre tourne, alors j'attends que ma maison passe par ici...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum