View previous topic :: View next topic |
Author |
Message |
lateralus01 Tux's lil' helper
Joined: 24 Jan 2008 Posts: 86
|
Posted: Sun Jan 27, 2008 9:53 pm Post subject: Can I continue with the installation? |
|
|
I'm trying install Gentoo and Windows Vista on the same hard drive. I've already done this with openSUSE but i deleted openSUSE because I want Gentoo.
The last time i posted about this type of problem my post was redirected to duplicate posts. I really have no idea why because I directed to the post my was supposed to be duplicating but their problem wasn't the same as mine. The weren't putting two operating systems on their hard drive they could format the whole thing, they weren't useing bootit NG and fdisk wasn't giving them the same message as mine was so idk what the deal is. I have made progress since then so please just hear me out.
Anywho here's my situation:
After fdisk wasn't working for me I used a combination of Bootit NG and openSUSE to partition my Hard Drive.
Here's what Bootit NG now shows:
Bootit EMBRM 8 MB Bootit EMBRM
----------- 7146 MB Free Space
Windows Vista 102399 MB HPFS/NTFS
Gentoo 81219 MB Extended
hda1 20481 MB Linux Native
hda2 2055 MB Linux Swap/Solaris
hda3 58683 MB Linux Native
However, when I boot up the installation cd and run fdisk I get this:
Code: |
livecd / # fdisk /dev/hda
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): p
Disk /dev/hda: 4700 MB, 4700372992 bytes
255 heads, 63 sectors/track, 142 cylinders, total 2295104 sectors
Units = sectors of 1 * 2048 bytes = 2048 bytes
Command (m for help):
|
How do i get Gentoo to see my partition table?
Thanks, Lateralus
(By the way, my bios shows nothing about lower-block addressing) |
|
Back to top |
|
|
Nick C Guru
Joined: 18 Mar 2005 Posts: 526 Location: Portsmouth, England
|
Posted: Sun Jan 27, 2008 10:05 pm Post subject: |
|
|
can you post the output of fdisk -l (lowercase L)? _________________ Please add [solved] to the initial post's subject line if you feel your problem is resolved.
www.monkeydust.net |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Sun Jan 27, 2008 10:09 pm Post subject: |
|
|
lateralus01,
You have the new style partition table its not supported by fdisk, nor any of the kernels on the Gentoo liveCD.
As openSUSE can see it, use openSUSE as a liveCD to install Gentoo by hand.
When you come to make you own kernel, it can be band to support this new parttion table format.
You need this Handbook and the knoppix changes in that guide.
Do not write a partition table with fdisk - it will destroy your vista install. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
Habbit Apprentice
Joined: 01 Sep 2007 Posts: 237 Location: 3.7137 W, 40.3873 N
|
Posted: Sun Jan 27, 2008 11:19 pm Post subject: |
|
|
NeddySeagoon wrote: | You have the new style partition table its not supported by fdisk, nor any of the kernels on the Gentoo liveCD. |
What's the "new style partition table"? A variation on MBR? GPT? Windows "dynamic disk" LVM lookalike? _________________
Code: | ~ $ objdump -d ./habbit_mind
90 xchg %rax, %rax
EB FD jmp $-3 |
|
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Mon Jan 28, 2008 6:57 pm Post subject: |
|
|
Habbit,
I can't tell form the information in the post. Its likely to be either GPT or Windows "dynamic disk" as this partition table will have been created with the Windows install.
LVM should never be written to a MBR as its created on top of other partitions. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
|