Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
trouble with USB Logitech WheelMouse
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
gentooner
n00b
n00b


Joined: 15 May 2003
Posts: 17

PostPosted: Thu May 22, 2003 7:39 pm    Post subject: trouble with USB Logitech WheelMouse Reply with quote

Hello Y'all. I have a Gateway Solo 5300 Laptop which has had its share of Linux/BSD installs on it, but for some reason I cannot get my USB mouse to load in Gentoo. I read through the instructions on how to get this setup, but I'm stuck on this step:

The first thing that has to be done is the installation of the kernel modules. The modules that will be needed for a USB mouse to work are usbmouse, mousedev, hid, usbcore, usb-uhci, and input. After the necessary kernel configuration is done, insmod the modules.

How do I load these modules into the kernel without recompiling?

When I unplug/replug my mouse, I see this in the kernel log:

hub.c: new USB device 00:07.2-1, assigned address 3
: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:3.0

there are no entires in /dev/input. I think that the step I'm missing is the loading of Kernel modules, but again I'm clueless in this regard.

Any help is greatly appreciated. Thank you!
Back to top
View user's profile Send private message
therandomor
n00b
n00b


Joined: 30 Apr 2003
Posts: 13
Location: West Chester, PA

PostPosted: Fri May 23, 2003 12:10 am    Post subject: HID Reply with quote

I just had a similar situation. What I did was go back into the kernel configuration and make sure that I checked HID as a module. There are some good directions here: http://www.linux-usb.org/USB-guide/x194.html

As far as loading the modules, if you know nothing about it, I suggest 'man modprobe' and 'man insmod' and finally 'man lsmod'. That should get you rolling!
_________________
"I'm a bipolar depressive, from a line of bipolar depressives. That's how I come to write so good."

-Kurt Vonnegut, Jr.
Timequake
Back to top
View user's profile Send private message
gentooner
n00b
n00b


Joined: 15 May 2003
Posts: 17

PostPosted: Fri May 23, 2003 1:47 pm    Post subject: thanks a bunch! Reply with quote

Hey, thanks. You sent me in the right direction. now that I'm more familiar with the documentation I'll probably not need to ask silly questions anymore.
Back to top
View user's profile Send private message
therandomor
n00b
n00b


Joined: 30 Apr 2003
Posts: 13
Location: West Chester, PA

PostPosted: Fri May 23, 2003 3:36 pm    Post subject: You bet Reply with quote

A question isn't silly if you don't know where to look to find the answer. Everyone here seems more than happy to help. I'm glad I could give you a hand.
_________________
"I'm a bipolar depressive, from a line of bipolar depressives. That's how I come to write so good."

-Kurt Vonnegut, Jr.
Timequake
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum