Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
matroxfb: Problemen met G100 'Productiva'
View unanswered posts
View posts from last 24 hours

Reply to topic    Gentoo Forums Forum Index Dutch
View previous topic :: View next topic  
Author Message

Joined: 01 May 2007
Posts: 1

PostPosted: Tue May 01, 2007 6:56 pm    Post subject: matroxfb: Problemen met G100 'Productiva' Reply with quote

Hey allen,

Ik zit momenteel met een probleem dat ik framebuffer support niet voor elkaar krijg met mijn G100 (4MB/SGRAM):

title=Gentoo Linux 2.6.20-r7
root (hd0,0)
kernel (hd0,0)/vmlinuz ro root=/dev/hda3 video=matroxfb:noinit:xres:640,yres:480,depth:16

Ik heb geprobeerd om diverse opties te gebruiken die gedocumenteerd staat in de readme van matroxfb.

[*] Enable firmware EDID
<*> Support for frame buffer devices
[*] Enable Video Mode Handling Helpers
--- Enable Tile Blitting Support
<*> Matrox acceleration
[ ] Millennium I/II support
[ ] Mystique support
[*] G100/G200/G400/G450/G550 support
< > Matrox I2C support
[ ] Multihead support

Voor alle duidelijkheid, VESA heb ik niet ingeschakeld in de kernel. Is er iemand hier met een oplossing?

Edit: dmesg
Linux version 2.6.20-gentoo-r7 (root@livecd) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 Tue May 1 12:02:06 CEST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 0000000007efd000 end: 0000000007ffd000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 0000000007ffd000 size: 0000000000002000 end: 0000000007fff000 type: 3
copy_e820_map() start: 0000000007fff000 size: 0000000000001000 end: 0000000008000000 type: 4
copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ffd000 (usable)
BIOS-e820: 0000000007ffd000 - 0000000007fff000 (ACPI data)
BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
127MB LOWMEM available.
Entering add_active_range(0, 0, 32765) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32765
early_node_map[1] active PFN ranges
0: 0 -> 32765
On node 0 totalpages: 32765
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 223 pages used for memmap
Normal zone: 28446 pages, LIFO batch:7
DMI 2.0 present.
Using APIC driver default
ACPI: RSDP (v000 ASUS ) @ 0x000f7f30
ACPI: RSDT (v001 ASUS P2B 0x58582e31 ASUS 0x31303030) @ 0x07ffd000
ACPI: FADT (v001 ASUS P2B 0x58582e31 ASUS 0x31303030) @ 0x07ffd080
ACPI: BOOT (v001 ASUS P2B 0x58582e31 ASUS 0x31303030) @ 0x07ffd040
ACPI: DSDT (v001 ASUS P2B 0x00001000 MSFT 0x01000001) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 10000000 (gap: 08000000:f7ff0000)
Detected 451.046 MHz processor.
Built 1 zonelists. Total pages: 32510
Kernel command line: ro root=/dev/hda3 video=matroxfb:noinit:xres:640,yres:480,depth:16
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01101000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126056k/131060k available (2031k kernel code, 4488k reserved, 799k data, 188k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB)
vmalloc : 0xc8800000 - 0xfffb4000 ( 887 MB)
lowmem : 0xc0000000 - 0xc7ffd000 ( 127 MB)
.init : 0xc03c6000 - 0xc03f5000 ( 188 kB)
.data : 0xc02fbcd7 - 0xc03c3990 ( 799 kB)
.text : 0xc0100000 - 0xc02fbcd7 (2031 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 902.81 BogoMIPS (lpj=1805638)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0c00)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
0000:00:04.1: cannot adjust BAR0 (not I/O)
0000:00:04.1: cannot adjust BAR1 (not I/O)
0000:00:04.1: cannot adjust BAR2 (not I/O)
0000:00:04.1: cannot adjust BAR3 (not I/O)
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region e400-e43f claimed by PIIX4 ACPI
PCI quirk: region e800-e80f claimed by PIIX4 SMB
PIIX4 devres B PIO at 0290-0297
PCI: Firmware left 0000:00:09.0 e100 interrupts enabled, disabling
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: e1800000-e2dfffff
PREFETCH window: e2f00000-e3ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
Simple Boot Flag at 0x46 set to 0x1
IA-32 Microcode Update Driver: v1.14a <>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xe4000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
matroxfb: Matrox MGA-G100 (AGP) detected
PInS memtype = 4
matroxfb: MTRR's turned on
matroxfb: 640x480x16bpp (virtual: 640x3276)
matroxfb: framebuffer at 0xE3000000, mapped to 0xc8880000, size 4194304
Console: switching to colour frame buffer device 80x30
fb0: MATROX frame buffer device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2])
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xe1000000, irq 10, MAC addr 00:90:27:A3:1F:3F
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SV0644A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LTN526, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 12504240 sectors (6402 MB) w/490KiB Cache, CHS=13232/15/63, UDMA(33)
hda: hda1 hda2 hda3
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:04.2: UHCI Host Controller
uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:04.2: irq 10, io base 0x0000d400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input2
i2c /dev entries driver
piix4_smbus 0000:00:04.3: Found 0000:00:04.3 device
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
input: ImPS/2 Generic Wheel Mouse as /class/input/input3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
EXT3 FS on hda3, internal journal
Adding 125676k swap on /dev/hda2. Priority:-1 extents:1 across:125676k
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Dutch All times are GMT
Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum