| View previous topic :: View next topic |
| Author |
Message |
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
 Posted: Fri Feb 23, 2007 7:54 am Post subject: Wlan Installation |
 |
|
Hallo,
wollte WLan auf meinem Laptop einrichten.
Habe eine Intel Pro 2200 Mini-PCI Wlan-Modul nach IEEE 802.11 b/g Standard
Habe dafür folgendes bereits aktiviert:
| Code: | Device Drivers ==>
Network device support ==>
* Wireless lan (non hamradio) |
Dann
| Code: | | emerge wireless-tools |
Erledigt
Weiter | Code: | | emerge ipw2200 ipw2200-firmware |
ging nicht, da pakete auf "Masked" stehen, daher auch ein "modprobe ipw2200" nicht möglich, weiter konnte ich nicht versuchen.
| Code: | # emerge ipw2200 ipw2200-firmware
Calculating dependencies -
!!! All ebuilds that could satisfy "ipw2200" have been masked.
!!! One of the following masked packages is required to complete your request:
- net-wireless/ipw2200-1.1.3 (masked by: package.mask)
# Christian Heim <phreak@gentoo.org> (19 Jan 2007)
# Masked, pending removal in 30 days. Please stop using the external package
# and use the in-kernel equivalents
- net-wireless/ipw2200-1.2.0 (masked by: package.mask, ~x86 keyword)
- net-wireless/ipw2200-1.1.2-r1 (masked by: package.mask)
|
Muss ich sonst noch etwas im Kernel aktivieren oder was mach ich sonst falsch?
Danke |
|
| Back to top |
|
 |
Reto Hasler
n00b
Joined: 21 Oct 2006
Posts: 24
|
| Posted: Fri Feb 23, 2007 9:49 am Post subject: |
|
|
Hallo
Schreib mal folgende Zeile in die Datei /etc/portage/packages.keywords:
| Code: | | net-wireless/ipw2200 ~x86 |
Danach versuche es nochmals mit dem letzten emerge, das bei dir nicht funktioniert hat. Eingentlich solltest du so die Treiber installieren können. |
|
| Back to top |
|
|
blu3bird
Retired Dev
Joined: 04 Oct 2003
Posts: 616
Location: Munich, Germany
|
| Posted: Fri Feb 23, 2007 4:20 pm Post subject: |
|
|
Leider können sehr viele Leute kein Englisch, daher übersetz ichs mal:
| Quote: | | Masked, pending removal in 30 days. Please stop using the external package and use the in-kernel equivalents |
Maskiert, ausstehende Löschung in 30 Tagen. Bitte höhr auf das externe Packet zu benutzen und nimm (stattdessen) das Gegenstück im Kernel.
_________________
Black Holes are created when God divides by zero! |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Fri Feb 23, 2007 7:47 pm Post subject: |
|
|
| blu3bird wrote: | Leider können sehr viele Leute kein Englisch, daher übersetz ichs mal:
| Quote: | | Masked, pending removal in 30 days. Please stop using the external package and use the in-kernel equivalents |
Maskiert, ausstehende Löschung in 30 Tagen. Bitte höhr auf das externe Packet zu benutzen und nimm (stattdessen) das Gegenstück im Kernel. |
wo kann ich da dieses Packet finden? |
|
| Back to top |
|
|
blu3bird
Retired Dev
Joined: 04 Oct 2003
Posts: 616
Location: Munich, Germany
|
| Posted: Fri Feb 23, 2007 8:19 pm Post subject: |
|
|
Im Kernel.
Device Drivers ---> Network device support ---> Wireless LAN (non-hamradio) ---> Intel PRO/Wireless 2200BG and 2915ABG Network Connection
_________________
Black Holes are created when God divides by zero! |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Fri Feb 23, 2007 9:02 pm Post subject: |
|
|
das hab ich auch bereits integriert aber wenn ich dann folgende Module aufrufe, kommen Fehlermeldungen:
| Code: | Das Modul ipw2200 sollte sich nun in den Kernel laden lassen:
modprobe ipw2200 <= FATAL: Module ipw2200 not found
Um verschlüsselte Verbindungen zu benutzen sollten noch folgende Module geladen werden:
modprobe ieee80211 <= FATAL: Module ieee80211 not found
modprobe ieee80211_crypt <= FATAL: Module ieee80211_crypt not found
modprobe ieee80211_crypt_wep <= FATAL: Module ieee80211_crypt_wep not found.
modprobe ieee80211_crypt_ccmp <= konnte geladen werden
modprobe ieee80211_crypt_tkip <= konnte geladen werden |
gehe nach diesem wiki vor: http://de.gentoo-wiki.com/Ipw2200
Beim booten erscheint was von ipw2200 load und dann wieder nicht geladen...
... |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Sat Feb 24, 2007 3:21 pm Post subject: |
|
|
| Reto Hasler wrote: | Hallo
Schreib mal folgende Zeile in die Datei /etc/portage/packages.keywords:
| Code: | | net-wireless/ipw2200 ~x86 |
Danach versuche es nochmals mit dem letzten emerge, das bei dir nicht funktioniert hat. Eingentlich solltest du so die Treiber installieren können. |
dass habe ich eingetragen aber gleiche fehler erneut.
habe auch die treiber im kernel aktiviert, aber ohne erfolg |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Tue Feb 27, 2007 1:03 pm Post subject: |
|
|
so, mittlerweile habe ich alle nötigen treiber installiert aber habe erhebliche probleme, mein WLan einzurichten:
meine /etc/conf.d/net schaut so aus:
| Code: | # WLAN
config_eth0=( "dhcp" )
modules=( "wpa_supplicant" )
wpa_supplicant_eth0="Dmadwifi"
wpa_timeout_eth0=60 |
Meine /etc/wpa_supplicant/wpa_supplicant.conf
| Code: | ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
network={
ssid="MeinWlan"
scan_ssid=1
key_mgmt=WPA-PSK
psk=...
}
|
habt ihr noch tips?
Möchte auf jedenfall WPA2 einrichten. |
|
| Back to top |
|
|
big-birdy
Apprentice
Joined: 18 Jan 2005
Posts: 179
Location: Neustadt
|
| Posted: Tue Feb 27, 2007 3:38 pm Post subject: |
|
|
Hi.
Was für ein Notebook hast du? Welche Fehlermeldungen erhälst du? |
|
| Back to top |
|
|
Anarcho
Advocate
Joined: 06 Jun 2004
Posts: 2970
Location: Germany
|
| Posted: Tue Feb 27, 2007 4:30 pm Post subject: |
|
|
Wichtig: Auch den Kernel-internen ipw2200 Treiber als Modul und nicht fest in den Kernel kompilieren. Sonst kommt es zu problemen beim laden der Firmware (diese muss natürlich weiterhin emerged werden), siehe dmesg.
_________________
...it's only Rock'n'Roll, but I like it! |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Tue Feb 27, 2007 5:20 pm Post subject: |
|
|
Die Treiber sind entsprechend als Module im Kernel
Bei iwconfig kommt diese Meldung:
| Code: | lo no wireless extensions.
eth0 no wireless extensions. |
Eigentlich soll meine Wlanverbindung über eth1 laufen, über eth0 läuft das ganze über LAN
Meine /etc/wpa_supplicant/wpa_supplicant.conf schaut so aus:
| Code: | ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
ap_scan=1
network={
ssid="meinessid"
#psk="meinpasswort"
psk=vielebuchstabenundzahlen
}
|
Meine /etc/conf.d/net
| Code: | # WLAN
config_eth1=( "dhcp" )
modules=( "wpa_supplicant" )
wpa_supplicant_eth1="Dmadwifi"
wpa_timeout_eth1=60 |
Last edited by senti on Tue Feb 27, 2007 6:08 pm; edited 1 time in total |
|
| Back to top |
|
|
Finswimmer
Bodhisattva
Joined: 02 Sep 2004
Posts: 5467
Location: Langen (Hessen), Germany
|
| Posted: Tue Feb 27, 2007 5:23 pm Post subject: |
|
|
Es scheint, als findet iwconfig deine eth1 Karte nicht.
Hast du die Module auch geladen? Was sagt ein dmesg|grep net?
Tobi
_________________
Bitte auf Rechtschreibung, korrekte Formatierung und Höflichkeit achten!
Danke |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Tue Feb 27, 2007 5:48 pm Post subject: |
|
|
Ausgabe:
| Code: | dmesg|grep net
ipw2200: failed to register network device
8139too Fast Ethernet driver 0.9.28
|
|
|
| Back to top |
|
|
Finswimmer
Bodhisattva
Joined: 02 Sep 2004
Posts: 5467
Location: Langen (Hessen), Germany
|
| Posted: Tue Feb 27, 2007 7:38 pm Post subject: |
|
|
Du nutzt die Kernel Treiber? Und die 2200er Firmware ausm Portage?
Sicher, dass du eine 2200er Karte hast?
Hast du etwas durcheinander gemixt? Weil du vorher ja das Paket aus Portage nehmen wolltest...
Deinstallier es mal, wenn du es noch drauf haben solltest.
Tobi
_________________
Bitte auf Rechtschreibung, korrekte Formatierung und Höflichkeit achten!
Danke |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Wed Feb 28, 2007 3:49 pm Post subject: |
|
|
| Quote: | | Du nutzt die Kernel Treiber? Und die 2200er Firmware ausm Portage? |
Kerneltreiber: ja
FW aus Portage: nein
| Quote: | | Sicher, dass du eine 2200er Karte hast? |
Ganz sicher
| Quote: | Hast du etwas durcheinander gemixt? Weil du vorher ja das Paket aus Portage nehmen wolltest...
Deinstallier es mal, wenn du es noch drauf haben solltest. |
aus Portage ging nicht, daher auch nicht installiert |
|
| Back to top |
|
|
firefly
Watchman
Joined: 31 Oct 2002
Posts: 5342
|
| Posted: Wed Feb 28, 2007 4:15 pm Post subject: |
|
|
| senti wrote: | | Quote: | | Sicher, dass du eine 2200er Karte hast? |
Ganz sicher |
Um wirklich sicher zu gehen gib mal bitte die ausgabe von
_________________
Ein Ring, sie zu knechten, sie alle zu finden,
Ins Dunkel zu treiben und ewig zu binden
Im Lande Mordor, wo die Schatten drohn. |
|
| Back to top |
|
|
Finswimmer
Bodhisattva
Joined: 02 Sep 2004
Posts: 5467
Location: Langen (Hessen), Germany
|
| Posted: Wed Feb 28, 2007 4:31 pm Post subject: |
|
|
Du brauchst aber noch die FW ausm Portage Tree.
emerge net-wireless/ipw2200-firmware
Tobi
_________________
Bitte auf Rechtschreibung, korrekte Formatierung und Höflichkeit achten!
Danke |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Wed Feb 28, 2007 5:56 pm Post subject: |
|
|
hier die ausgabe:
| Code: | # lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/ O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Grap hics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics De vice (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) U SB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) U SB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) U SB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Co ntroller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (re v 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 0 3)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Cont roller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH 4-L/ICH4-M) AC'97 Audio Controller (rev 03)
01:03.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (re v 02)
01:07.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connec tion (rev 05)
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Cont roller (PHY/Link)
01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139 C+ (rev 10)
|
|
|
| Back to top |
|
|
Finswimmer
Bodhisattva
Joined: 02 Sep 2004
Posts: 5467
Location: Langen (Hessen), Germany
|
| Posted: Wed Feb 28, 2007 6:19 pm Post subject: |
|
|
Hast du die FW draufgemacht?
Was sagt dmesg, direkt nachdem du das Modul geladen hast?
Tobi
_________________
Bitte auf Rechtschreibung, korrekte Formatierung und Höflichkeit achten!
Danke |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Wed Feb 28, 2007 7:30 pm Post subject: |
|
|
so, hoffe, dass nun alles im kernel ist.
ausgabe dmesg
| Code: | Linux version 2.6.19-gentoo-r5 (root@localhost) (gcc-Version 4.1.1 (Gentoo 4.1.1)) #1 SMP Mon Feb 26 21:23:51 GMT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
user-defined physical RAM map:
user: 0000000000000000 - 000000000009fc00 (usable)
user: 000000000009fc00 - 00000000000a0000 (reserved)
user: 00000000000e0000 - 0000000000100000 (reserved)
user: 0000000000100000 - 000000003a200000 (usable)
34MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 238080) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 238080
early_node_map[1] active PFN ranges
0: 0 -> 238080
On node 0 totalpages: 238080
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 68 pages used for memmap
HighMem zone: 8636 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f63b0
ACPI: RSDT (v001 A M I OEMRSDT 0x07000413 MSFT 0x00000097) @ 0x3f7d0000
ACPI: FADT (v002 A M I OEMFACP 0x07000413 MSFT 0x00000097) @ 0x3f7d0200
ACPI: OEMB (v001 A M I AMI_OEM 0x07000413 MSFT 0x00000097) @ 0x3f7df040
ACPI: DSDT (v001 1ABWG 1ABWG001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
Allocating PCI resources starting at 40000000 (gap: 3a200000:c5e00000)
Detected 600.052 MHz processor.
Built 1 zonelists. Total pages: 236220
Kernel command line: vga=864 mem=930m root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3 udev
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Speakup v-2.00 CVS: Sat Oct 7 10:52:29 EDT 2006 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 937004k/952320k available (3027k kernel code, 14736k reserved, 711k data, 264k init, 34816k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04ae000 - 0xc04f0000 ( 264 kB)
.data : 0xc03f4e88 - 0xc04a6b14 ( 711 kB)
.text : 0xc0100000 - 0xc03f4e88 (3027 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1200.94 BogoMIPS (lpj=6004707)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0e28)
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
SMP motherboard not detected.
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 2151k freed
PM: Adding info for No Bus:platform
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
PM: Adding info for acpi:acpi
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PM: Adding info for No Bus:pci0000:00
Boot video device is 0000:00:02.0
PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #02 (-#05) is hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PM: Adding info for pci:0000:00:00.0
PM: Adding info for pci:0000:00:00.1
PM: Adding info for pci:0000:00:00.3
PM: Adding info for pci:0000:00:02.0
PM: Adding info for pci:0000:00:02.1
PM: Adding info for pci:0000:00:1d.0
PM: Adding info for pci:0000:00:1d.1
PM: Adding info for pci:0000:00:1d.2
PM: Adding info for pci:0000:00:1d.7
PM: Adding info for pci:0000:00:1e.0
PM: Adding info for pci:0000:00:1f.0
PM: Adding info for pci:0000:00:1f.1
PM: Adding info for pci:0000:00:1f.3
PM: Adding info for pci:0000:00:1f.5
PM: Adding info for pci:0000:01:03.0
PM: Adding info for pci:0000:01:07.0
PM: Adding info for pci:0000:01:0a.0
PM: Adding info for pci:0000:01:0c.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
PM: Adding info for No Bus:pnp0
PM: Adding info for pnp:00:00
PM: Adding info for pnp:00:01
PM: Adding info for pnp:00:02
PM: Adding info for pnp:00:03
PM: Adding info for pnp:00:04
PM: Adding info for pnp:00:05
PM: Adding info for pnp:00:06
PM: Adding info for pnp:00:07
PM: Adding info for pnp:00:08
PM: Adding info for pnp:00:09
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:08: ioport range 0x1100-0x113f has been reserved
pnp: 00:08: ioport range 0x1254-0x1254 has been reserved
pnp: 00:08: ioport range 0x12d4-0x12d4 has been reserved
pnp: 00:08: ioport range 0x1300-0x1375 has been reserved
pnp: 00:08: ioport range 0x1377-0x137f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bus 2, cardbus bridge: 0000:01:03.0
IO window: 0000c000-0000c0ff
IO window: 0000c400-0000c4ff
PREFETCH window: 40000000-41ffffff
MEM window: 44000000-45ffffff
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: ffb00000-ffbfffff
PREFETCH window: 40000000-41ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:01:03.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
PM: Adding info for platform:pcspkr
highmem bounce pool size: 64 pages
squashfs: version 3.1 (2006/08/19) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler deadline registered (default)
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xf0000000
[drm] Initialized drm 1.0.1 20051102
PM: Adding info for platform:vesafb.0
vesafb: framebuffer at 0xf0000000, mapped to 0xf8980000, using 2000k, total 8000k
vesafb: mode is 1280x800x8, linelength=1280, pages=6
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 160x50
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
PM: Adding info for No Bus:pnp1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
intelfb: intelfb_init
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
intelfb: Version 0.9.4
intelfb: intelfb_setup
intelfb: no options
intelfb: intelfb_pci_register
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
intelfb: fb aperture: 0xf0000000/0x8000000, MMIO region: 0xffe80000/0x80000
intelfb: Cannot reserve FB region.
intelfb: cleanup
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
PM: Adding info for platform:serial8250
PM: Adding info for No Bus:isa
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Linux video capture interface: v2.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG HM100JC, ATA DISK drive
PM: Adding info for No Bus:ide0
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
PM: Adding info for ide:0.0
Probing IDE interface ide1...
hdc: QSI DVDRW SDW-042, ATAPI CD/DVD-ROM drive
PM: Adding info for No Bus:ide1
ide1 at 0x170-0x177,0x376 on irq 15
PM: Adding info for ide:1.0
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
PM: Adding info for serio:serio0
PM: Adding info for serio:serio1
mice: PS/2 mouse device common for all mice
PM: Adding info for serio:serio2
PM: Adding info for platform:eisa.0
PM: Adding info for serio:serio3
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
Intel 810 + AC97 Audio, version 1.01, 21:21:22 Feb 26 2007
PM: Adding info for serio:serio4
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
i810: Intel ICH4 found at IO 0xe400 and 0xe000, MEM 0xffdff800 and 0xffdff400, IRQ 3
i810: Intel ICH4 mmio at 0xf8804800 and 0xf8806400
input: AT Translated Set 2 keyboard as /class/input/input0
i810_audio: Primary codec has ID 0
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
i810_audio: Connection 0 with codec id 0
ac97_codec: AC97 Audio codec, id: VIA97 (Unknown)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
es1371: version v0.32 time 21:21:27 Feb 26 2007
btaudio: driver version 0.7 loaded [digital+analog]
Advanced Linux Sound Architecture Driver Version 1.0.13 (Tue Nov 28 14:07:24 2006 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Testing NMI watchdog ... OK.
Using IPI Shortcut mode
Freeing unused kernel memory: 264k freed
Time: tsc clocksource has been installed.
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0x804719/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xffdffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
PM: Adding info for usb:usb1
PM: Adding info for No Bus:usbdev1.1_ep00
usb usb1: configuration #1 chosen from 1 choice
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
PM: Adding info for No Bus:usbdev1.1_ep81
psmouse.c: Failed to reset mouse on isa0060/serio3
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e480
PM: Adding info for usb:usb2
PM: Adding info for No Bus:usbdev2.1_ep00
usb usb2: configuration #1 chosen from 1 choice
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev2.1_ep81
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e800
PM: Adding info for usb:usb3
PM: Adding info for No Bus:usbdev3.1_ep00
usb usb3: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev3.1_ep81
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 9, io base 0x0000e880
PM: Adding info for usb:usb4
PM: Adding info for No Bus:usbdev4.1_ep00
usb usb4: configuration #1 chosen from 1 choice
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:usbdev4.1_ep81
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 3-1: new low speed USB device using uhci_hcd and address 2
PM: Adding info for usb:3-1
PM: Adding info for No Bus:usbdev3.2_ep00
usb 3-1: configuration #1 chosen from 1 choice
PM: Adding info for usb:3-1:1.0
PM: Adding info for No Bus:usbdev3.2_ep81
usbcore: registered new interface driver hiddev
input: HID 062a:0000 as /class/input/input2
input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.1-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
input: PS/2 Generic Mouse as /class/input/input3
psmouse.c: Failed to enable mouse on isa0060/serio3
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
PM: Adding info for ieee1394:fw-host0
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[ffbfe800-ffbfefff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
JFS: nTxBlock = 7340, nTxLock = 58726
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
PM: Adding info for ieee1394:00030d4922302b9a
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4922302b9a]
PM: Adding info for ieee1394:00030d4922302b9a-0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on hda3, internal journal
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4kdmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:01:07.0 failed with error -5
Adding 915696k swap on /dev/hda2. Priority:-1 extents:1 across:915696k
Real Time Clock Driver v1.12ac
Yenta: CardBus bridge found at 0000:01:03.0 [1584:3200]
Yenta: adjusting diagnostic: 40 -> 60
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:01:03.0, mfunc 0x000c1002, devctl 0x44
Yenta: ISA IRQ mask 0x00d0, PCI irq 3
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#01) from #01 to #05
pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
cs: IO port probe 0xc000-0xcfff: clean.
pcmcia: parent PCI bridge Memory window: 0xffb00000 - 0xffbfffff
pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
eth0: RealTek RTL8139 at 0xf903c400, 00:03:0d:14:e4:cc, IRQ 5
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x800-0x8ff: excluding 0x860-0x867
cs: IO port probe 0x100-0x4ff: excluding 0x200-0x20f 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
[drm] Initialized i915 1.5.0 20060119 on minor 0
[drm] Initialized i915 1.5.0 20060119 on minor 1
|
|
|
| Back to top |
|
|
Knieper
l33t
Joined: 10 Nov 2005
Posts: 846
|
| Posted: Wed Feb 28, 2007 7:38 pm Post subject: |
|
|
| senti wrote: |
meine /etc/conf.d/net schaut so aus:
| Code: | # WLAN
config_eth0=( "dhcp" )
modules=( "wpa_supplicant" )
wpa_supplicant_eth0="Dmadwifi"
wpa_timeout_eth0=60 |
|
Muesste da als Treiber nicht ipw (wpa_supplicant_eth0=-Dipw) statt madwifi stehen? |
|
| Back to top |
|
|
Finswimmer
Bodhisattva
Joined: 02 Sep 2004
Posts: 5467
Location: Langen (Hessen), Germany
|
| Posted: Wed Feb 28, 2007 7:44 pm Post subject: |
|
|
| Code: | #wlan0
modules_eth0=( "wpa_supplicant" )
wpa_supplicant_eth0="-Dwext"
config_eth0=( "dhcp" )
|
So sieht meine aus.
@senti: Was sagt nun ein iwconfig?
Tobi
_________________
Bitte auf Rechtschreibung, korrekte Formatierung und Höflichkeit achten!
Danke |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Wed Feb 28, 2007 9:15 pm Post subject: |
|
|
Bei iwconfig kommt diese Meldung:
| Code: | lo no wireless extensions.
eth0 no wireless extensions. |
|
|
| Back to top |
|
|
MoinMan
Tux's lil' helper
Joined: 07 Jan 2007
Posts: 78
Location: Liechtenstein
|
| Posted: Wed Feb 28, 2007 9:43 pm Post subject: |
|
|
Du hast laut dmesg folgendes Probleme:
| Quote: | ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ipw2200: probe of 0000:01:07.0 failed with error -5
|
ipw2200 kann also die Firmware nicht laden und damit auch nicht starten. Hast du das Paket ipw2200-firmware installiert? Falls ja vielleicht einfach nochmals installieren. |
|
| Back to top |
|
|
senti
n00b
Joined: 29 Jun 2006
Posts: 67
|
| Posted: Thu Mar 01, 2007 11:23 am Post subject: |
|
|
wenn ich installieren mag, kommt:
| Code: | # emerge ipw2200-firmware
Calculating dependencies... done!
!!! Error: the sys-apps/coldplug package conflicts with another package;
!!! the two packages cannot be installed on the same system together.
!!! Please use 'emerge --pretend' to determine blockers.
For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?full=1#blocked
|
mache ich dies:
| Code: | # emerge --pretend ipw2200-firmware
These are the packages that would be merged, in order:
Calculating dependencies... done!
[blocks B ] sys-apps/coldplug (is blocking sys-fs/udev-104-r11)
[blocks B ] >=sys-fs/udev-089 (is blocking sys-apps/coldplug-20040920-r1)
[ebuild U ] sys-fs/udev-104-r11 [087-r1]
[ebuild N ] net-wireless/ipw2200-firmware-3.0 |
weiß nicht sorecht, was ich da zun muss |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
