Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
PB de bureau etendu avec xinerama carte intel 915/910
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
westbam
n00b
n00b


Joined: 26 Oct 2006
Posts: 30

PostPosted: Thu Oct 26, 2006 12:00 pm    Post subject: PB de bureau etendu avec xinerama carte intel 915/910 Reply with quote

salut ,
voila mon soucis
j'ai un dell D410 ( ecran 12p 1024*768) sur une station d'acceuil où est branché un ecran LCD de 17p 1280*1024.
le xinerama fonctionne bien ( le 12p est a gauche et le 17p a droite)
le hic c'est que le 17p est bien en 1280*1024 mais avec un bureau etendu de 1600*1200 !!!
comment faire pour que le surface de mon bureau fasse bien 1280*1024 sur l'ecran 17p ??
voici mon xorg.conf

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
Load "dbe" # Double buffer extension
Load "synaptics"
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

Load "type1"
Load "freetype"
Load "glx"
# Load "dri"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"

EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

Option "blank time" "3" # 10 minutes

# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

Option "standby time" "3"
Option "suspend time" "3"
Option "off time" "3"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option "EstimateSizesAggresively" "0"

# Option "RandR" "on"


# Option "DefaultServerLayout" "LFP_Layout"
# Option "DefaultServerLayout" "Clone_CRT_LFP_Layout"
# Option "DefaultServerLayout" "Multihead_CRT_LFP_Layout"
Option "DefaultServerLayout" "Xinerama_CRT_LFP_Layout"
# Option "DefaultServerLayout" "Multihead_TV_LFP_Layout"


EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"

EndSection




Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapMove" "110"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
EndSection







# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"

Identifier "LFP_Monitor"
HorizSync 31.5 - 64.3
VertRefresh 50-100
Modeline "1280*1024" 83.46 1280 1344 1480 1680 800 801 804 828 +HSYNC +VSYNC
Option "DPMS"

EndSection

Section "Monitor"
Identifier "CRT_Monitor"
HorizSync 30 - 100
VertRefresh 50 - 85
ModeLine "1024*768" 80.14 1280 1280 1384 1688 1024 1025 1030 1037
HorizSync 31.5 - 67.0
VertRefresh 50.0 - 75.0
Option "dpms"
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Videocard_Device"
Driver "i810"
EndSection

Section "Device"
Identifier "Videocard_CRT_LFP_0_Device"
Driver "i810"
BusID "PCI:0:2:0"
Screen 0
Option "MonitorLayout" "CRT,LFP"
# Option "dri"
Option "AGPMode" "4"
EndSection

Section "Device"
Identifier "Videocard_CRT_LFP_1_Device"
Driver "i810"
BusID "PCI:0:2:0"
Screen 1
Option "MonitorLayout" "CRT,LFP"
# Option "dri"
Option "AGPMode" "4"
EndSection

Section "Device"
Identifier "Videocard_TV_LFP_0_Device"
Driver "i810"
BusID "PCI:0:2:0"
Screen 0
Option "MonitorLayout" "TV,LFP"
EndSection

Section "Device"
Identifier "Videocard_TV_LFP_1_Device"
Driver "i810"
BusID "PCI:0:2:0"
Screen 1
Option "MonitorLayout" "TV,LFP"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
Identifier "LFP_Screen"
Device "Videocard_Device"
Monitor "LFP_Monitor"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1024*768"
ViewPort 0 0
EndSubsection
EndSection

Section "Screen"
Identifier "CRT_LFP_0_Screen"
Device "Videocard_CRT_LFP_0_Device"
#Device "VideoCard_Device"
Monitor "CRT_Monitor"
DefaultDepth 24
SubSection "Display"
# Viewport 0 0
Depth 24
Modes "1280*1024"

EndSubSection
EndSection

Section "Screen"
Identifier "CRT_LFP_1_Screen"
Device "Videocard_CRT_LFP_1_Device"
#Device "Videocard_Device"
Monitor "LFP_Monitor"
DefaultDepth 24
SubSection "Display"
# Viewport 0 0
Depth 24
Modes "1024*768"
EndSubSection
EndSection

#-----------------------------------------------
Section "ServerLayout"
Identifier "LFP_Layout"
Screen "LFP_Screen"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"

EndSection

Section "ServerLayout"
Identifier "Clone_CRT_LFP_Layout"
Screen "CRT_LFP_1_Screen"
Screen "CRT_LFP_0_Screen"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"

Option "Clone" "on"
Option "CloneRefresh" "60"
Option "DevicePresence" "yes"
EndSection

Section "ServerLayout"
Identifier "Multihead_CRT_LFP_Layout"
Screen "CRT_LFP_1_Screen"
Screen "CRT_LFP_0_Screen" RightOf "CRT_LFP_1_Screen"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"

EndSection

Section "ServerLayout"
Identifier "Xinerama_CRT_LFP_Layout"
Screen "CRT_LFP_1_Screen"
Screen "CRT_LFP_0_Screen" RightOf "CRT_LFP_1_Screen"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
Option "Xinerama" "on"
EndSection

##fin du fichier xorg.conf

merci d'avance pour votre aide
_________________
http://www.netblog.tk
Back to top
View user's profile Send private message
Mickael
Advocate
Advocate


Joined: 05 Sep 2005
Posts: 2383
Location: ~Belfort! - France - EU

PostPosted: Fri Oct 27, 2006 8:58 am    Post subject: Reply with quote

Salut et bienvenue parmis nous,

Je viens de lire en diagonale ton poste et figure toi que nous sommes quelques un ici à posséder des cartes graphiques intel. Nous avons (Blasserre plus précisément) ouvert un htread concernant ce genre de problème. Notre ami BaNaNe à fait quelques tentives réussites sur ce type de configurations et à laisser son fichier de conf dans ce dit thread dont voici le lien.

Juste une petite remarque, afin de faciliter la lecture tu pourrais insérer ton code, tes conf log et autres joyeusetés entre des balises de types Codes :
Quote:
Code:
 une conf


Voilà, merci.

EDIT : tiens j'oubliais, ton titre ne respecte pas nos coventions, regarde ma signature et clic dessus, tu sauras quoi faire j'en suis persuadé.

EDIT 2 : en regardant ta conf tout semble normal, donc pour le moment je miserais sur un problème de modelines, mais c'est juste une première impression. Et mais vraiment ta conf de xorg entre balises, car c'est super chiant à lire sinon. :wink:
_________________
À LIRE : COMMENT POSTER ET OBTENIR DE L'AIDE ?
Qui suis-je ? Bon j'ai relu, comme d'habitude, je suis bon a rien le vendredi
Qui suis-je ? Je ne serai jamais modo
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum