cron freezes system?

[DaggyStyle]

can it be? it happened to me twice last night, here is the messages of the specific day:

[code:1:1485ea2509]
Oct 17 19:07:45 NCC-5001-D syslog-ng[5365]: syslog-ng version 1.6.9 starting
Oct 17 19:07:45 NCC-5001-D syslog-ng[5365]: Changing permissions on special file /dev/tty12
Oct 17 19:07:45 NCC-5001-D Bootdata ok (command line is clock=pmtmr root=/dev/sda5)
Oct 17 19:07:45 NCC-5001-D Linux version 2.6.17-gentoo-r8 (root@NCC-5001-D) (gcc version 4.1.1 (Gentoo 4.1.1)) #9 SMP PREEMPT Tue Oct 10 13:49:27 IST 2006
Oct 17 19:07:45 NCC-5001-D BIOS-provided physical RAM map:
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 000000003ff00000 - 000000003ff17000 (ACPI data)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 000000003ff17000 - 000000003ff80000 (ACPI NVS)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 17 19:07:45 NCC-5001-D BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Oct 17 19:07:45 NCC-5001-D DMI present.
Oct 17 19:07:45 NCC-5001-D ACPI: RSDP (v000 HP ) @ 0x00000000000f89a0
Oct 17 19:07:45 NCC-5001-D ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @ 0x000000003ff0fb15
Oct 17 19:07:45 NCC-5001-D ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x000000003ff16cce
Oct 17 19:07:45 NCC-5001-D ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003ff16d42
Oct 17 19:07:45 NCC-5001-D ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x000000003ff16f48
Oct 17 19:07:45 NCC-5001-D ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff16f84
Oct 17 19:07:45 NCC-5001-D ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003ff16fd8
Oct 17 19:07:45 NCC-5001-D ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
Oct 17 19:07:45 NCC-5001-D Scanning NUMA topology in Northbridge 24
Oct 17 19:07:45 NCC-5001-D Number of nodes 1
Oct 17 19:07:45 NCC-5001-D Node 0 MemBase 0000000000000000 Limit 000000003ff00000
Oct 17 19:07:45 NCC-5001-D NUMA: Using 63 for the hash shift.
Oct 17 19:07:45 NCC-5001-D Using node hash shift of 63
Oct 17 19:07:45 NCC-5001-D Bootmem setup node 0 0000000000000000-000000003ff00000
Oct 17 19:07:45 NCC-5001-D On node 0 totalpages: 256125
Oct 17 19:07:45 NCC-5001-D DMA zone: 1857 pages, LIFO batch:0
Oct 17 19:07:45 NCC-5001-D DMA32 zone: 254268 pages, LIFO batch:31
Oct 17 19:07:45 NCC-5001-D Nvidia board detected. Ignoring ACPI timer override.
Oct 17 19:07:45 NCC-5001-D ACPI: PM-Timer IO Port: 0x1008
Oct 17 19:07:45 NCC-5001-D ACPI: Local APIC address 0xfee00000
Oct 17 19:07:45 NCC-5001-D ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 17 19:07:45 NCC-5001-D Processor #0 15:8 APIC version 16
Oct 17 19:07:45 NCC-5001-D ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 17 19:07:45 NCC-5001-D Processor #1 15:8 APIC version 16
Oct 17 19:07:45 NCC-5001-D ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 17 19:07:45 NCC-5001-D ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 17 19:07:45 NCC-5001-D ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 17 19:07:45 NCC-5001-D IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 17 19:07:45 NCC-5001-D ACPI: IRQ9 used by override.
Oct 17 19:07:45 NCC-5001-D Setting APIC routing to physical flat
Oct 17 19:07:45 NCC-5001-D Using ACPI (MADT) for SMP configuration information
Oct 17 19:07:45 NCC-5001-D Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Oct 17 19:07:45 NCC-5001-D Checking aperture...
Oct 17 19:07:45 NCC-5001-D CPU 0: aperture @ e40000000 size 32 MB
Oct 17 19:07:45 NCC-5001-D Aperture from northbridge cpu 0 too small (32 MB)
Oct 17 19:07:45 NCC-5001-D No AGP bridge found
Oct 17 19:07:45 NCC-5001-D SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 17 19:07:45 NCC-5001-D Built 1 zonelists
Oct 17 19:07:45 NCC-5001-D Kernel command line: clock=pmtmr root=/dev/sda5
Oct 17 19:07:45 NCC-5001-D Initializing CPU#0
Oct 17 19:07:45 NCC-5001-D PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct 17 19:07:45 NCC-5001-D Disabling vsyscall due to use of PM timer
Oct 17 19:07:45 NCC-5001-D time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
Oct 17 19:07:45 NCC-5001-D time.c: Detected 2009.164 MHz processor.
Oct 17 19:07:45 NCC-5001-D Console: colour VGA+ 80x25
Oct 17 19:07:45 NCC-5001-D Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 17 19:07:45 NCC-5001-D Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 17 19:07:45 NCC-5001-D Memory: 1022556k/1047552k available (4170k kernel code, 24600k reserved, 1913k data, 216k init)
Oct 17 19:07:45 NCC-5001-D Calibrating delay using timer specific routine.. 4023.04 BogoMIPS (lpj=8046089)
Oct 17 19:07:45 NCC-5001-D Mount-cache hash table entries: 256
Oct 17 19:07:45 NCC-5001-D CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 17 19:07:45 NCC-5001-D CPU: L2 Cache: 512K (64 bytes/line)
Oct 17 19:07:45 NCC-5001-D CPU 0/0(2) -> Node 0 -> Core 0
Oct 17 19:07:45 NCC-5001-D Using local APIC timer interrupts.
Oct 17 19:07:45 NCC-5001-D result 12557293
Oct 17 19:07:45 NCC-5001-D Detected 12.557 MHz APIC timer.
Oct 17 19:07:45 NCC-5001-D Booting processor 1/2 APIC 0x1
Oct 17 19:07:45 NCC-5001-D Initializing CPU#1
Oct 17 19:07:45 NCC-5001-D Calibrating delay using timer specific routine.. 4018.64 BogoMIPS (lpj=8037287)
Oct 17 19:07:45 NCC-5001-D CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 17 19:07:45 NCC-5001-D CPU: L2 Cache: 512K (64 bytes/line)
Oct 17 19:07:45 NCC-5001-D CPU 1/1(2) -> Node 0 -> Core 1
Oct 17 19:07:45 NCC-5001-D AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Oct 17 19:07:45 NCC-5001-D CPU 1: Syncing TSC to CPU 0.
Oct 17 19:07:45 NCC-5001-D CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 526 cycles)
Oct 17 19:07:45 NCC-5001-D Brought up 2 CPUs
Oct 17 19:07:45 NCC-5001-D testing NMI watchdog ... OK.
Oct 17 19:07:45 NCC-5001-D migration_cost=247
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 16
Oct 17 19:07:45 NCC-5001-D ACPI: bus type pci registered
Oct 17 19:07:45 NCC-5001-D PCI: Using configuration type 1
Oct 17 19:07:45 NCC-5001-D ACPI: Subsystem revision 20060127
Oct 17 19:07:45 NCC-5001-D ACPI: Interpreter enabled
Oct 17 19:07:45 NCC-5001-D ACPI: Using IOAPIC for interrupt routing
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 17 19:07:45 NCC-5001-D PCI: Probing PCI hardware (bus 00)
Oct 17 19:07:45 NCC-5001-D ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Oct 17 19:07:45 NCC-5001-D Boot video device is 0000:05:00.0
Oct 17 19:07:45 NCC-5001-D PCI: Transparent bridge - 0000:00:10.0
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 17 19:07:45 NCC-5001-D ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *11
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
Oct 17 19:07:45 NCC-5001-D SCSI subsystem initialized
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver usbfs
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver hub
Oct 17 19:07:45 NCC-5001-D PCI: Using ACPI for IRQ routing
Oct 17 19:07:45 NCC-5001-D PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 23
Oct 17 19:07:45 NCC-5001-D Bluetooth: Core ver 2.8
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 31
Oct 17 19:07:45 NCC-5001-D Bluetooth: HCI device and connection manager initialized
Oct 17 19:07:45 NCC-5001-D Bluetooth: HCI socket layer initialized
Oct 17 19:07:45 NCC-5001-D PCI-DMA: Disabling IOMMU.
Oct 17 19:07:45 NCC-5001-D PCI: Bridge: 0000:00:02.0
Oct 17 19:07:45 NCC-5001-D IO window: 4000-4fff
Oct 17 19:07:45 NCC-5001-D MEM window: c0200000-c03fffff
Oct 17 19:07:45 NCC-5001-D PREFETCH window: c3200000-c33fffff
Oct 17 19:07:45 NCC-5001-D PCI: Bridge: 0000:00:03.0
Oct 17 19:07:45 NCC-5001-D IO window: disabled.
Oct 17 19:07:45 NCC-5001-D MEM window: c0400000-c05fffff
Oct 17 19:07:45 NCC-5001-D PREFETCH window: disabled.
Oct 17 19:07:45 NCC-5001-D PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0
Oct 17 19:07:45 NCC-5001-D PCI: Bridge: 0000:00:04.0
Oct 17 19:07:45 NCC-5001-D IO window: 5000-5fff
Oct 17 19:07:45 NCC-5001-D MEM window: c1000000-c2ffffff
Oct 17 19:07:45 NCC-5001-D PREFETCH window: d0000000-dfffffff
Oct 17 19:07:45 NCC-5001-D PCI: Bridge: 0000:00:10.0
Oct 17 19:07:45 NCC-5001-D IO window: disabled.
Oct 17 19:07:45 NCC-5001-D MEM window: c3000000-c30fffff
Oct 17 19:07:45 NCC-5001-D PREFETCH window: disabled.
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:10.0 to 64
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 2
Oct 17 19:07:45 NCC-5001-D IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 17 19:07:45 NCC-5001-D TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Oct 17 19:07:45 NCC-5001-D TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 17 19:07:45 NCC-5001-D TCP: Hash tables configured (established 131072 bind 65536)
Oct 17 19:07:45 NCC-5001-D TCP reno registered
Oct 17 19:07:45 NCC-5001-D Simple Boot Flag at 0x36 set to 0x1
Oct 17 19:07:45 NCC-5001-D IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Oct 17 19:07:45 NCC-5001-D Total HugeTLB memory allocated, 0
Oct 17 19:07:45 NCC-5001-D Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 17 19:07:45 NCC-5001-D NTFS driver 2.1.27 [Flags: R/W].
Oct 17 19:07:45 NCC-5001-D JFS: nTxBlock = 7988, nTxLock = 63909
Oct 17 19:07:45 NCC-5001-D SGI XFS with large block/inode numbers, no debug enabled
Oct 17 19:07:45 NCC-5001-D Initializing Cryptographic API
Oct 17 19:07:45 NCC-5001-D io scheduler noop registered
Oct 17 19:07:45 NCC-5001-D io scheduler deadline registered
Oct 17 19:07:45 NCC-5001-D io scheduler cfq registered (default)
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 17 19:07:45 NCC-5001-D pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
Oct 17 19:07:45 NCC-5001-D assign_interrupt_mode Found MSI capability
Oct 17 19:07:45 NCC-5001-D Allocate Port Service[0000:00:02.0:pcie00]
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 17 19:07:45 NCC-5001-D pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
Oct 17 19:07:45 NCC-5001-D assign_interrupt_mode Found MSI capability
Oct 17 19:07:45 NCC-5001-D Allocate Port Service[0000:00:03.0:pcie00]
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 17 19:07:45 NCC-5001-D pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
Oct 17 19:07:45 NCC-5001-D assign_interrupt_mode Found MSI capability
Oct 17 19:07:45 NCC-5001-D Allocate Port Service[0000:00:04.0:pcie00]
Oct 17 19:07:45 NCC-5001-D pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 17 19:07:45 NCC-5001-D pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 17 19:07:45 NCC-5001-D Real Time Clock Driver v1.12ac
Oct 17 19:07:45 NCC-5001-D Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
Oct 17 19:07:45 NCC-5001-D Linux agpgart interface v0.101 (c) Dave Jones
Oct 17 19:07:45 NCC-5001-D ACPI: AC Adapter [ACAD] (off-line)
Oct 17 19:07:45 NCC-5001-D ACPI: Battery Slot [BAT0] (battery present)
Oct 17 19:07:45 NCC-5001-D ACPI: Power Button (FF) [PWRF]
Oct 17 19:07:45 NCC-5001-D ACPI: Power Button (CM) [PWRB]
Oct 17 19:07:45 NCC-5001-D ACPI: Sleep Button (CM) [SLPB]
Oct 17 19:07:45 NCC-5001-D ACPI: Lid Switch [LID]
Oct 17 19:07:45 NCC-5001-D ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
Oct 17 19:07:45 NCC-5001-D ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Oct 17 19:07:45 NCC-5001-D ACPI: Thermal Zone [THRM] (39 C)
Oct 17 19:07:45 NCC-5001-D Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Oct 17 19:07:45 NCC-5001-D serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 17 19:07:45 NCC-5001-D serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 17 19:07:45 NCC-5001-D mice: PS/2 mouse device common for all mice
Oct 17 19:07:45 NCC-5001-D input: AT Translated Set 2 keyboard as /class/input/input0
Oct 17 19:07:45 NCC-5001-D Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
Oct 17 19:07:45 NCC-5001-D input: SynPS/2 Synaptics TouchPad as /class/input/input1
Oct 17 19:07:45 NCC-5001-D floppy0: no floppy controllers found
Oct 17 19:07:45 NCC-5001-D RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 17 19:07:45 NCC-5001-D loop: loaded (max 8 devices)
Oct 17 19:07:45 NCC-5001-D forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
Oct 17 19:07:45 NCC-5001-D GSI 16 sharing vector 0xD1 and IRQ 16
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 23 (level, high) -> IRQ 209
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:14.0 to 64
Oct 17 19:07:45 NCC-5001-D forcedeth: using HIGHDMA
Oct 17 19:07:45 NCC-5001-D eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
Oct 17 19:07:45 NCC-5001-D PPP generic driver version 2.4.2
Oct 17 19:07:45 NCC-5001-D tun: Universal TUN/TAP device driver, 1.6
Oct 17 19:07:45 NCC-5001-D tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 17 19:07:45 NCC-5001-D bcm43xx driver
Oct 17 19:07:45 NCC-5001-D netconsole: not configured, aborting
Oct 17 19:07:45 NCC-5001-D Linux video capture interface: v1.00
Oct 17 19:07:45 NCC-5001-D sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.27
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver sn9c102
Oct 17 19:07:45 NCC-5001-D Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 17 19:07:45 NCC-5001-D ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 17 19:07:45 NCC-5001-D NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
Oct 17 19:07:45 NCC-5001-D NFORCE-MCP51: chipset revision 241
Oct 17 19:07:45 NCC-5001-D NFORCE-MCP51: not 100% native mode: will probe irqs later
Oct 17 19:07:45 NCC-5001-D NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
Oct 17 19:07:45 NCC-5001-D NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
Oct 17 19:07:45 NCC-5001-D ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio
Oct 17 19:07:45 NCC-5001-D Probing IDE interface ide0...
Oct 17 19:07:45 NCC-5001-D hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
Oct 17 19:07:45 NCC-5001-D ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 17 19:07:45 NCC-5001-D Probing IDE interface ide1...
Oct 17 19:07:45 NCC-5001-D hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA
Oct 17 19:07:45 NCC-5001-D Uniform CD-ROM driver Revision: 3.20
Oct 17 19:07:45 NCC-5001-D megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
Oct 17 19:07:45 NCC-5001-D megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
Oct 17 19:07:45 NCC-5001-D megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
Oct 17 19:07:45 NCC-5001-D libata version 1.20 loaded.
Oct 17 19:07:45 NCC-5001-D sata_nv 0000:00:0e.0: version 0.8
Oct 17 19:07:45 NCC-5001-D PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
Oct 17 19:07:45 NCC-5001-D GSI 17 sharing vector 0xD9 and IRQ 17
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 22 (level, high) -> IRQ 217
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 17 19:07:45 NCC-5001-D ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 217
Oct 17 19:07:45 NCC-5001-D ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 217
Oct 17 19:07:45 NCC-5001-D ata1: SATA link up 1.5 Gbps (SStatus 113)
Oct 17 19:07:45 NCC-5001-D ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f
Oct 17 19:07:45 NCC-5001-D ata1: dev 0 ATA-7, max UDMA/100, 192426570 sectors: LBA48
Oct 17 19:07:45 NCC-5001-D ata1: dev 0 configured for UDMA/100
Oct 17 19:07:45 NCC-5001-D scsi0 : sata_nv
Oct 17 19:07:45 NCC-5001-D ata2: SATA link down (SStatus 0)
Oct 17 19:07:45 NCC-5001-D scsi1 : sata_nv
Oct 17 19:07:45 NCC-5001-D Vendor: ATA Model: FUJITSU MHV2100B Rev: 0085
Oct 17 19:07:45 NCC-5001-D Type: Direct-Access ANSI SCSI revision: 05
Oct 17 19:07:45 NCC-5001-D SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB)
Oct 17 19:07:45 NCC-5001-D sda: Write Protect is off
Oct 17 19:07:45 NCC-5001-D sda: Mode Sense: 00 3a 00 00
Oct 17 19:07:45 NCC-5001-D SCSI device sda: drive cache: write back
Oct 17 19:07:45 NCC-5001-D SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB)
Oct 17 19:07:45 NCC-5001-D sda: Write Protect is off
Oct 17 19:07:45 NCC-5001-D sda: Mode Sense: 00 3a 00 00
Oct 17 19:07:45 NCC-5001-D SCSI device sda: drive cache: write back
Oct 17 19:07:45 NCC-5001-D sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Oct 17 19:07:45 NCC-5001-D sd 0:0:0:0: Attached scsi disk sda
Oct 17 19:07:45 NCC-5001-D Fusion MPT base driver 3.03.09
Oct 17 19:07:45 NCC-5001-D Copyright (c) 1999-2005 LSI Logic Corporation
Oct 17 19:07:45 NCC-5001-D Fusion MPT SPI Host driver 3.03.09
Oct 17 19:07:45 NCC-5001-D ieee1394: Initialized config rom entry `ip1394'
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 11 (level, high) -> IRQ 11
Oct 17 19:07:45 NCC-5001-D ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c3000000-c30007ff] Max Packet=[2048] IR/IT contexts=[4/4]
Oct 17 19:07:45 NCC-5001-D video1394: Installed video1394 module
Oct 17 19:07:45 NCC-5001-D ieee1394: raw1394: /dev/raw1394 device initialized
Oct 17 19:07:45 NCC-5001-D ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
Oct 17 19:07:45 NCC-5001-D ieee1394: sbp2: Try serialize_io=0 for better performance
Oct 17 19:07:45 NCC-5001-D eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
Oct 17 19:07:45 NCC-5001-D GSI 18 sharing vector 0xE1 and IRQ 18
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 21 (level, high) -> IRQ 225
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:0b.1 to 64
Oct 17 19:07:45 NCC-5001-D ehci_hcd 0000:00:0b.1: EHCI Host Controller
Oct 17 19:07:45 NCC-5001-D ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
Oct 17 19:07:45 NCC-5001-D ehci_hcd 0000:00:0b.1: debug port 1
Oct 17 19:07:45 NCC-5001-D PCI: cache line size of 64 is not supported by device 0000:00:0b.1
Oct 17 19:07:45 NCC-5001-D ehci_hcd 0000:00:0b.1: irq 225, io mem 0xc0005000
Oct 17 19:07:45 NCC-5001-D ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 17 19:07:45 NCC-5001-D usb usb1: configuration #1 chosen from 1 choice
Oct 17 19:07:45 NCC-5001-D hub 1-0:1.0: USB hub found
Oct 17 19:07:45 NCC-5001-D hub 1-0:1.0: 8 ports detected
Oct 17 19:07:45 NCC-5001-D ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
Oct 17 19:07:45 NCC-5001-D GSI 19 sharing vector 0xE9 and IRQ 19
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 20 (level, high) -> IRQ 233
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:0b.0 to 64
Oct 17 19:07:45 NCC-5001-D ohci_hcd 0000:00:0b.0: OHCI Host Controller
Oct 17 19:07:45 NCC-5001-D ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
Oct 17 19:07:45 NCC-5001-D ohci_hcd 0000:00:0b.0: irq 233, io mem 0xc0004000
Oct 17 19:07:45 NCC-5001-D usb usb2: configuration #1 chosen from 1 choice
Oct 17 19:07:45 NCC-5001-D hub 2-0:1.0: USB hub found
Oct 17 19:07:45 NCC-5001-D hub 2-0:1.0: 8 ports detected
Oct 17 19:07:45 NCC-5001-D usb 1-4: new high speed USB device using ehci_hcd and address 3
Oct 17 19:07:45 NCC-5001-D usb 1-4: configuration #1 chosen from 1 choice
Oct 17 19:07:45 NCC-5001-D usb 2-3: new full speed USB device using ohci_hcd and address 2
Oct 17 19:07:45 NCC-5001-D usb 2-3: configuration #1 chosen from 1 choice
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver usblp
Oct 17 19:07:45 NCC-5001-D drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Oct 17 19:07:45 NCC-5001-D Initializing USB Mass Storage driver...
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver usb-storage
Oct 17 19:07:45 NCC-5001-D USB Mass Storage support registered.
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver usbhid
Oct 17 19:07:45 NCC-5001-D drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Oct 17 19:07:45 NCC-5001-D device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
Oct 17 19:07:45 NCC-5001-D sdhci: Secure Digital Host Controller Interface driver, 0.11
Oct 17 19:07:45 NCC-5001-D sdhci: Copyright(c) Pierre Ossman
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 10 (level, high) -> IRQ 10
Oct 17 19:07:45 NCC-5001-D mmc0: SDHCI at 0xc3000800 irq 10 PIO
Oct 17 19:07:45 NCC-5001-D wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.5
Oct 17 19:07:45 NCC-5001-D wbsd: Copyright(c) Pierre Ossman
Oct 17 19:07:45 NCC-5001-D ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc0003cc1af00]
Oct 17 19:07:45 NCC-5001-D oprofile: using NMI interrupt.
Oct 17 19:07:45 NCC-5001-D Netfilter messages via NETLINK v0.30.
Oct 17 19:07:45 NCC-5001-D ip_conntrack version 2.4 (4092 buckets, 32736 max) - 248 bytes per conntrack
Oct 17 19:07:45 NCC-5001-D ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 17 19:07:45 NCC-5001-D TCP bic registered
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 1
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 10
Oct 17 19:07:45 NCC-5001-D IPv6 over IPv4 tunneling driver
Oct 17 19:07:45 NCC-5001-D ip6_tables: (C) 2000-2006 Netfilter Core Team
Oct 17 19:07:45 NCC-5001-D NET: Registered protocol family 17
Oct 17 19:07:45 NCC-5001-D IrCOMM protocol (Dag Brattli)
Oct 17 19:07:45 NCC-5001-D Bluetooth: L2CAP ver 2.8
Oct 17 19:07:45 NCC-5001-D Bluetooth: L2CAP socket layer initialized
Oct 17 19:07:45 NCC-5001-D Bluetooth: SCO (Voice Link) ver 0.5
Oct 17 19:07:45 NCC-5001-D Bluetooth: SCO socket layer initialized
Oct 17 19:07:45 NCC-5001-D Bluetooth: RFCOMM socket layer initialized
Oct 17 19:07:45 NCC-5001-D Bluetooth: RFCOMM TTY layer initialized
Oct 17 19:07:45 NCC-5001-D Bluetooth: RFCOMM ver 1.7
Oct 17 19:07:45 NCC-5001-D Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Oct 17 19:07:45 NCC-5001-D Bluetooth: BNEP filters: protocol multicast
Oct 17 19:07:45 NCC-5001-D Bluetooth: HIDP (Human Interface Emulation) ver 1.1
Oct 17 19:07:45 NCC-5001-D ieee80211: 802.11 data/management/control stack, git-1.1.7
Oct 17 19:07:45 NCC-5001-D ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
Oct 17 19:07:45 NCC-5001-D ieee80211_crypt: registered algorithm 'NULL'
Oct 17 19:07:45 NCC-5001-D ieee80211_crypt: registered algorithm 'WEP'
Oct 17 19:07:45 NCC-5001-D ieee80211_crypt: registered algorithm 'CCMP'
Oct 17 19:07:45 NCC-5001-D ieee80211_crypt: registered algorithm 'TKIP'
Oct 17 19:07:45 NCC-5001-D powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
Oct 17 19:07:45 NCC-5001-D powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12 (1100 mV)
Oct 17 19:07:45 NCC-5001-D powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14 (1050 mV)
Oct 17 19:07:45 NCC-5001-D powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x16 (1000 mV)
Oct 17 19:07:45 NCC-5001-D powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e (800 mV)
Oct 17 19:07:45 NCC-5001-D cpu_init done, current fid 0xc, vid 0x12
Oct 17 19:07:45 NCC-5001-D ACPI wakeup devices:
Oct 17 19:07:45 NCC-5001-D MAC0
Oct 17 19:07:45 NCC-5001-D ACPI: (supports S0 S3 S4 S5)
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda5: found reiserfs format "3.6" with standard journal
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda5: using ordered data mode
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda5: checking transaction log (sda5)
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda5: Using r5 hash to sort names
Oct 17 19:07:45 NCC-5001-D VFS: Mounted root (reiserfs filesystem) readonly.
Oct 17 19:07:45 NCC-5001-D Freeing unused kernel memory: 216k freed
Oct 17 19:07:45 NCC-5001-D ndiswrapper version 1.25 loaded (preempt=yes,smp=yes)
Oct 17 19:07:45 NCC-5001-D ndiswrapper (load_pe_images:577): fixing KI_USER_SHARED_DATA address in the driver
Oct 17 19:07:45 NCC-5001-D ndiswrapper: driver bcmwl5 (Broadcom,03/23/2006, 4.40.19.0) loaded
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 19
Oct 17 19:07:45 NCC-5001-D GSI 20 sharing vector 0x32 and IRQ 20
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 19 (level, high) -> IRQ 50
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:03:00.0 to 64
Oct 17 19:07:45 NCC-5001-D ndiswrapper: using IRQ 50
Oct 17 19:07:45 NCC-5001-D wlan0: vendor: ''
Oct 17 19:07:45 NCC-5001-D wlan0: ethernet device 00:14:a5:e1:a2:e1 using NDIS driver bcmwl5, 14E4:4312.5.conf
Oct 17 19:07:45 NCC-5001-D wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
Oct 17 19:07:45 NCC-5001-D usbcore: registered new driver ndiswrapper
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LK1E] -> GSI 19 (level, high) -> IRQ 50
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:05:00.0 to 64
Oct 17 19:07:45 NCC-5001-D NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8774 Tue Aug 1 21:42:17 PDT 2006
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda6: found reiserfs format "3.6" with standard journal
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda6: using ordered data mode
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda6: checking transaction log (sda6)
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda6: Using r5 hash to sort names
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda7: found reiserfs format "3.6" with standard journal
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda7: using ordered data mode
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda7: checking transaction log (sda7)
Oct 17 19:07:45 NCC-5001-D ReiserFS: sda7: Using r5 hash to sort names
Oct 17 19:07:45 NCC-5001-D Adding 1566296k swap on /dev/sda8. Priority:-1 extents:1 across:1566296k
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 18
Oct 17 19:07:45 NCC-5001-D GSI 21 sharing vector 0x3A and IRQ 21
Oct 17 19:07:45 NCC-5001-D ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 18 (level, high) -> IRQ 58
Oct 17 19:07:45 NCC-5001-D PCI: Setting latency timer of device 0000:00:10.1 to 64
Oct 17 19:07:49 NCC-5001-D eth0: no link during initialization.
Oct 17 19:07:49 NCC-5001-D ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 17 19:07:49 NCC-5001-D ifplugd(eth0)[6004]: ifplugd 0.28 initializing.
Oct 17 19:07:49 NCC-5001-D ifplugd(eth0)[6004]: Using interface eth0/00:16:36:7C:DE:36 with driver <forcedeth> (version: 0.54)
Oct 17 19:07:49 NCC-5001-D ifplugd(eth0)[6004]: Using detection mode: SIOCETHTOOL
Oct 17 19:07:49 NCC-5001-D ifplugd(eth0)[6004]: Initialization complete, link beat not detected.
Oct 17 19:07:50 NCC-5001-D ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 17 19:07:56 NCC-5001-D ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 17 19:08:06 NCC-5001-D cron[7025]: (CRON) STARTUP (V5.0)
Oct 17 19:08:06 NCC-5001-D wlan0: no IPv6 routers present
Oct 17 19:09:58 NCC-5001-D kde(pam_unix)[6784]: session opened for user dagg by (uid=0)
Oct 17 19:10:01 NCC-5001-D cron[7199]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Oct 17 19:10:34 NCC-5001-D (dagg-7382): starting (version 2.14.0), pid 7382 user 'dagg'
Oct 17 19:10:35 NCC-5001-D (dagg-7382): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 17 19:10:35 NCC-5001-D (dagg-7382): Resolved address "xml:readwrite:/home/dagg/.gconf" to a writable configuration source at position 1
Oct 17 19:10:35 NCC-5001-D (dagg-7382): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Oct 17 19:20:01 NCC-5001-D cron[9239]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Oct 17 19:30:01 NCC-5001-D cron[11159]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Oct 17 20:41:56 NCC-5001-D syslog-ng[5385]: syslog-ng version 1.6.9 starting
Oct 17 20:41:56 NCC-5001-D syslog-ng[5385]: Changing permissions on special file /dev/tty12
Oct 17 20:41:56 NCC-5001-D Bootdata ok (command line is clock=pmtmr root=/dev/sda5)
Oct 17 20:41:56 NCC-5001-D Linux version 2.6.17-gentoo-r8 (root@NCC-5001-D) (gcc version 4.1.1 (Gentoo 4.1.1)) #9 SMP PREEMPT Tue Oct 10 13:49:27 IST 2006
Oct 17 20:41:56 NCC-5001-D BIOS-provided physical RAM map:
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 000000003ff00000 - 000000003ff17000 (ACPI data)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 000000003ff17000 - 000000003ff80000 (ACPI NVS)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 17 20:41:56 NCC-5001-D BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Oct 17 20:41:56 NCC-5001-D DMI present.
Oct 17 20:41:56 NCC-5001-D ACPI: RSDP (v000 HP ) @ 0x00000000000f89a0
Oct 17 20:41:56 NCC-5001-D ACPI: RSDT (v001 HP RSDT 0x06040000 LTP 0x00000000) @ 0x000000003ff0fb15
Oct 17 20:41:56 NCC-5001-D ACPI: FADT (v001 HP MCP51M 0x06040000 PTL_ 0x000f4240) @ 0x000000003ff16cce
Oct 17 20:41:56 NCC-5001-D ACPI: SSDT (v001 HP POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000003ff16d42
Oct 17 20:41:56 NCC-5001-D ACPI: MCFG (v001 HP MCFG 0x06040000 LTP 0x00000000) @ 0x000000003ff16f48
Oct 17 20:41:56 NCC-5001-D ACPI: MADT (v001 HP APIC 0x06040000 LTP 0x00000000) @ 0x000000003ff16f84
Oct 17 20:41:56 NCC-5001-D ACPI: BOOT (v001 HP $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000003ff16fd8
Oct 17 20:41:56 NCC-5001-D ACPI: DSDT (v001 HP MCP51M 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
Oct 17 20:41:56 NCC-5001-D Scanning NUMA topology in Northbridge 24
Oct 17 20:41:56 NCC-5001-D Number of nodes 1
Oct 17 20:41:56 NCC-5001-D Node 0 MemBase 0000000000000000 Limit 000000003ff00000
Oct 17 20:41:56 NCC-5001-D NUMA: Using 63 for the hash shift.
Oct 17 20:41:56 NCC-5001-D Using node hash shift of 63
Oct 17 20:41:56 NCC-5001-D Bootmem setup node 0 0000000000000000-000000003ff00000
Oct 17 20:41:56 NCC-5001-D On node 0 totalpages: 256125
Oct 17 20:41:56 NCC-5001-D DMA zone: 1857 pages, LIFO batch:0
Oct 17 20:41:56 NCC-5001-D DMA32 zone: 254268 pages, LIFO batch:31
Oct 17 20:41:56 NCC-5001-D Nvidia board detected. Ignoring ACPI timer override.
Oct 17 20:41:56 NCC-5001-D ACPI: PM-Timer IO Port: 0x1008
Oct 17 20:41:56 NCC-5001-D ACPI: Local APIC address 0xfee00000
Oct 17 20:41:56 NCC-5001-D ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 17 20:41:56 NCC-5001-D Processor #0 15:8 APIC version 16
Oct 17 20:41:56 NCC-5001-D ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 17 20:41:56 NCC-5001-D Processor #1 15:8 APIC version 16
Oct 17 20:41:56 NCC-5001-D ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 17 20:41:56 NCC-5001-D ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 17 20:41:56 NCC-5001-D ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 17 20:41:56 NCC-5001-D IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 17 20:41:56 NCC-5001-D ACPI: IRQ9 used by override.
Oct 17 20:41:56 NCC-5001-D Setting APIC routing to physical flat
Oct 17 20:41:56 NCC-5001-D Using ACPI (MADT) for SMP configuration information
Oct 17 20:41:56 NCC-5001-D Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Oct 17 20:41:56 NCC-5001-D Checking aperture...
Oct 17 20:41:56 NCC-5001-D CPU 0: aperture @ 1a40000000 size 32 MB
Oct 17 20:41:56 NCC-5001-D Aperture from northbridge cpu 0 too small (32 MB)
Oct 17 20:41:56 NCC-5001-D No AGP bridge found
Oct 17 20:41:56 NCC-5001-D SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 17 20:41:56 NCC-5001-D Built 1 zonelists
Oct 17 20:41:56 NCC-5001-D Kernel command line: clock=pmtmr root=/dev/sda5
Oct 17 20:41:56 NCC-5001-D Initializing CPU#0
Oct 17 20:41:56 NCC-5001-D PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct 17 20:41:56 NCC-5001-D Disabling vsyscall due to use of PM timer
Oct 17 20:41:56 NCC-5001-D time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
Oct 17 20:41:56 NCC-5001-D time.c: Detected 2009.162 MHz processor.
Oct 17 20:41:56 NCC-5001-D Console: colour VGA+ 80x25
Oct 17 20:41:56 NCC-5001-D Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 17 20:41:56 NCC-5001-D Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 17 20:41:56 NCC-5001-D Memory: 1022556k/1047552k available (4170k kernel code, 24600k reserved, 1913k data, 216k init)
Oct 17 20:41:56 NCC-5001-D Calibrating delay using timer specific routine.. 4023.10 BogoMIPS (lpj=8046208)
Oct 17 20:41:56 NCC-5001-D Mount-cache hash table entries: 256
Oct 17 20:41:56 NCC-5001-D CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 17 20:41:56 NCC-5001-D CPU: L2 Cache: 512K (64 bytes/line)
Oct 17 20:41:56 NCC-5001-D CPU 0/0(2) -> Node 0 -> Core 0
Oct 17 20:41:56 NCC-5001-D Using local APIC timer interrupts.
Oct 17 20:41:56 NCC-5001-D result 12557280
Oct 17 20:41:56 NCC-5001-D Detected 12.557 MHz APIC timer.
Oct 17 20:41:56 NCC-5001-D Booting processor 1/2 APIC 0x1
Oct 17 20:41:56 NCC-5001-D Initializing CPU#1
Oct 17 20:41:56 NCC-5001-D Calibrating delay using timer specific routine.. 4018.64 BogoMIPS (lpj=8037299)
Oct 17 20:41:56 NCC-5001-D CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 17 20:41:56 NCC-5001-D CPU: L2 Cache: 512K (64 bytes/line)
Oct 17 20:41:56 NCC-5001-D CPU 1/1(2) -> Node 0 -> Core 1
Oct 17 20:41:56 NCC-5001-D AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
Oct 17 20:41:56 NCC-5001-D CPU 1: Syncing TSC to CPU 0.
Oct 17 20:41:56 NCC-5001-D CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 526 cycles)
Oct 17 20:41:56 NCC-5001-D Brought up 2 CPUs
Oct 17 20:41:56 NCC-5001-D testing NMI watchdog ... OK.
Oct 17 20:41:56 NCC-5001-D migration_cost=251
Oct 17 20:41:56 NCC-5001-D NET: Registered protocol family 16
Oct 17 20:41:56 NCC-5001-D ACPI: bus type pci registered
Oct 17 20:41:56 NCC-5001-D PCI: Using configuration type 1
Oct 17 20:41:56 NCC-5001-D ACPI: Subsystem revision 20060127
Oct 17 20:41:56 NCC-5001-D ACPI: Interpreter enabled
Oct 17 20:41:56 NCC-5001-D ACPI: Using IOAPIC for interrupt routing
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 17 20:41:56 NCC-5001-D PCI: Probing PCI hardware (bus 00)
Oct 17 20:41:56 NCC-5001-D ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Oct 17 20:41:56 NCC-5001-D Boot video device is 0000:05:00.0
Oct 17 20:41:56 NCC-5001-D PCI: Transparent bridge - 0000:00:10.0
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 17 20:41:56 NCC-5001-D ACPI: Embedded Controller [EC0] (gpe 16) interrupt mode.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *11
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *10
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LACI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LMCI] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *5
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
Oct 17 20:41:56 NCC-5001-D SCSI subsystem initialized
Oct 17 20:41:56 NCC-5001-D usbcore: registered new driver usbfs
Oct 17 20:41:56 NCC-5001-D usbcore: registered new driver hub
Oct 17 20:41:56 NCC-5001-D PCI: Using ACPI for IRQ routing
Oct 17 20:41:56 NCC-5001-D PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 17 20:41:56 NCC-5001-D NET: Registered protocol family 23
Oct 17 20:41:56 NCC-5001-D Bluetooth: Core ver 2.8
Oct 17 20:41:56 NCC-5001-D NET: Registered protocol family 31
Oct 17 20:41:56 NCC-5001-D Bluetooth: HCI device and connection manager initialized
Oct 17 20:41:56 NCC-5001-D Bluetooth: HCI socket layer initialized
Oct 17 20:41:56 NCC-5001-D PCI-DMA: Disabling IOMMU.
Oct 17 20:41:56 NCC-5001-D PCI: Bridge: 0000:00:02.0
Oct 17 20:41:56 NCC-5001-D IO window: 4000-4fff
Oct 17 20:41:56 NCC-5001-D MEM window: c0200000-c03fffff
Oct 17 20:41:56 NCC-5001-D PREFETCH window: c3200000-c33fffff
Oct 17 20:41:56 NCC-5001-D PCI: Bridge: 0000:00:03.0
Oct 17 20:41:56 NCC-5001-D IO window: disabled.
Oct 17 20:41:56 NCC-5001-D MEM window: c0400000-c05fffff
Oct 17 20:41:56 NCC-5001-D PREFETCH window: disabled.
Oct 17 20:41:56 NCC-5001-D PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:05:00.0
Oct 17 20:41:56 NCC-5001-D PCI: Bridge: 0000:00:04.0
Oct 17 20:41:56 NCC-5001-D IO window: 5000-5fff
Oct 17 20:41:56 NCC-5001-D MEM window: c1000000-c2ffffff
Oct 17 20:41:56 NCC-5001-D PREFETCH window: d0000000-dfffffff
Oct 17 20:41:56 NCC-5001-D PCI: Bridge: 0000:00:10.0
Oct 17 20:41:56 NCC-5001-D IO window: disabled.
Oct 17 20:41:56 NCC-5001-D MEM window: c3000000-c30fffff
Oct 17 20:41:56 NCC-5001-D PREFETCH window: disabled.
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:10.0 to 64
Oct 17 20:41:56 NCC-5001-D NET: Registered protocol family 2
Oct 17 20:41:56 NCC-5001-D IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Oct 17 20:41:56 NCC-5001-D TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Oct 17 20:41:56 NCC-5001-D TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 17 20:41:56 NCC-5001-D TCP: Hash tables configured (established 131072 bind 65536)
Oct 17 20:41:56 NCC-5001-D TCP reno registered
Oct 17 20:41:56 NCC-5001-D Simple Boot Flag at 0x36 set to 0x1
Oct 17 20:41:56 NCC-5001-D IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Oct 17 20:41:56 NCC-5001-D Total HugeTLB memory allocated, 0
Oct 17 20:41:56 NCC-5001-D Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 17 20:41:56 NCC-5001-D NTFS driver 2.1.27 [Flags: R/W].
Oct 17 20:41:56 NCC-5001-D JFS: nTxBlock = 7988, nTxLock = 63909
Oct 17 20:41:56 NCC-5001-D SGI XFS with large block/inode numbers, no debug enabled
Oct 17 20:41:56 NCC-5001-D Initializing Cryptographic API
Oct 17 20:41:56 NCC-5001-D io scheduler noop registered
Oct 17 20:41:56 NCC-5001-D io scheduler deadline registered
Oct 17 20:41:56 NCC-5001-D io scheduler cfq registered (default)
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 17 20:41:56 NCC-5001-D pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
Oct 17 20:41:56 NCC-5001-D assign_interrupt_mode Found MSI capability
Oct 17 20:41:56 NCC-5001-D Allocate Port Service[0000:00:02.0:pcie00]
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:03.0 to 64
Oct 17 20:41:56 NCC-5001-D pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
Oct 17 20:41:56 NCC-5001-D assign_interrupt_mode Found MSI capability
Oct 17 20:41:56 NCC-5001-D Allocate Port Service[0000:00:03.0:pcie00]
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:04.0 to 64
Oct 17 20:41:56 NCC-5001-D pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
Oct 17 20:41:56 NCC-5001-D assign_interrupt_mode Found MSI capability
Oct 17 20:41:56 NCC-5001-D Allocate Port Service[0000:00:04.0:pcie00]
Oct 17 20:41:56 NCC-5001-D pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 17 20:41:56 NCC-5001-D pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 17 20:41:56 NCC-5001-D Real Time Clock Driver v1.12ac
Oct 17 20:41:56 NCC-5001-D Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
Oct 17 20:41:56 NCC-5001-D Linux agpgart interface v0.101 (c) Dave Jones
Oct 17 20:41:56 NCC-5001-D ACPI: AC Adapter [ACAD] (on-line)
Oct 17 20:41:56 NCC-5001-D ACPI: Battery Slot [BAT0] (battery present)
Oct 17 20:41:56 NCC-5001-D ACPI: Power Button (FF) [PWRF]
Oct 17 20:41:56 NCC-5001-D ACPI: Power Button (CM) [PWRB]
Oct 17 20:41:56 NCC-5001-D ACPI: Sleep Button (CM) [SLPB]
Oct 17 20:41:56 NCC-5001-D ACPI: Lid Switch [LID]
Oct 17 20:41:56 NCC-5001-D ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
Oct 17 20:41:56 NCC-5001-D ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Oct 17 20:41:56 NCC-5001-D ACPI: Thermal Zone [THRM] (67 C)
Oct 17 20:41:56 NCC-5001-D Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Oct 17 20:41:56 NCC-5001-D serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 17 20:41:56 NCC-5001-D serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 17 20:41:56 NCC-5001-D mice: PS/2 mouse device common for all mice
Oct 17 20:41:56 NCC-5001-D input: AT Translated Set 2 keyboard as /class/input/input0
Oct 17 20:41:56 NCC-5001-D Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
Oct 17 20:41:56 NCC-5001-D input: SynPS/2 Synaptics TouchPad as /class/input/input1
Oct 17 20:41:56 NCC-5001-D floppy0: no floppy controllers found
Oct 17 20:41:56 NCC-5001-D RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Oct 17 20:41:56 NCC-5001-D loop: loaded (max 8 devices)
Oct 17 20:41:56 NCC-5001-D forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
Oct 17 20:41:56 NCC-5001-D GSI 16 sharing vector 0xD1 and IRQ 16
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 23 (level, high) -> IRQ 209
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:14.0 to 64
Oct 17 20:41:56 NCC-5001-D forcedeth: using HIGHDMA
Oct 17 20:41:56 NCC-5001-D eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
Oct 17 20:41:56 NCC-5001-D PPP generic driver version 2.4.2
Oct 17 20:41:56 NCC-5001-D tun: Universal TUN/TAP device driver, 1.6
Oct 17 20:41:56 NCC-5001-D tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Oct 17 20:41:56 NCC-5001-D bcm43xx driver
Oct 17 20:41:56 NCC-5001-D netconsole: not configured, aborting
Oct 17 20:41:56 NCC-5001-D Linux video capture interface: v1.00
Oct 17 20:41:56 NCC-5001-D sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.27
Oct 17 20:41:56 NCC-5001-D usbcore: registered new driver sn9c102
Oct 17 20:41:56 NCC-5001-D Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 17 20:41:56 NCC-5001-D ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 17 20:41:56 NCC-5001-D NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
Oct 17 20:41:56 NCC-5001-D NFORCE-MCP51: chipset revision 241
Oct 17 20:41:56 NCC-5001-D NFORCE-MCP51: not 100% native mode: will probe irqs later
Oct 17 20:41:56 NCC-5001-D NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
Oct 17 20:41:56 NCC-5001-D NFORCE-MCP51: 0000:00:0d.0 (rev f1) UDMA133 controller
Oct 17 20:41:56 NCC-5001-D ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio
Oct 17 20:41:56 NCC-5001-D Probing IDE interface ide0...
Oct 17 20:41:56 NCC-5001-D hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
Oct 17 20:41:56 NCC-5001-D ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Oct 17 20:41:56 NCC-5001-D Probing IDE interface ide1...
Oct 17 20:41:56 NCC-5001-D hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, (U)DMA
Oct 17 20:41:56 NCC-5001-D Uniform CD-ROM driver Revision: 3.20
Oct 17 20:41:56 NCC-5001-D megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
Oct 17 20:41:56 NCC-5001-D megaraid: 2.20.4.8 (Release Date: Mon Apr 11 12:27:22 EST 2006)
Oct 17 20:41:56 NCC-5001-D megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
Oct 17 20:41:56 NCC-5001-D libata version 1.20 loaded.
Oct 17 20:41:56 NCC-5001-D sata_nv 0000:00:0e.0: version 0.8
Oct 17 20:41:56 NCC-5001-D PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
Oct 17 20:41:56 NCC-5001-D GSI 17 sharing vector 0xD9 and IRQ 17
Oct 17 20:41:56 NCC-5001-D ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 22 (level, high) -> IRQ 217
Oct 17 20:41:56 NCC-5001-D PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 17 20:41:56 NCC-5001-D ata1: SATA max UDMA/133 cmd 0x30C0 ctl 0x30B6 bmdma 0x3090 irq 217
Oct 17 20:41:56 NCC-5001-D ata2: SATA max UDMA/133 cmd 0x30B8 ctl 0x30B2 bmdma 0x3098 irq 217
Oct 17 20:41:56 NCC-5001-D ata1: SATA link up 1.5 Gbps (SStatus 113)
Oct 17 20:41:56 NCC-5001-D ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f
Oct 17 20:41:56 NCC-5001-D ata1: dev 0 ATA-7, max UDMA/100, 192426570 sectors: LBA48
Oct 17 20:41:56 NCC-5001-D ata1: dev 0 configured for UDMA/100
Oct 17 20:41:56 NCC-5001-D scsi0 : sata_nv
Oct 17 20:41:56 NCC-5001-D ata2: SATA link down (SStatus 0)
Oct 17 20:41:56 NCC-5001-D scsi1 : sata_nv
Oct 17 20:41:56 NCC-5001-D Vendor: ATA Model: FUJITSU MHV2100B Rev: 0085
Oct 17 20:41:56 NCC-5001-D Type: Direct-Access ANSI SCSI revision: 05
Oct 17 20:41:56 NCC-5001-D SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB)
Oct 17 20:41:56 NCC-5001-D sda: Write Protect is off
Oct 17 20:41:56 NCC-5001-D sda: Mode Sense: 00 3a 00 00
Oct 17 20:41:56 NCC-5001-D SCSI device sda: drive cache: write back
Oct 17 20:41:56 NCC-5001-D SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB)
Oct 17 20:41:56 NCC-5001-D sda: Write Protect is off
Oct 17 20:41:56 NCC-5001-D sda: Mode Sense: 00 3a 00 00
Oct 17 20:41:56 NCC-5001-D SCSI device sda: drive cache: write back
Oct 17 20:41:56 NCC-5001-D sda&