Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Проблемы с загрузкой
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Russian
View previous topic :: View next topic  
Author Message
serg_dsv
n00b
n00b


Joined: 28 Sep 2006
Posts: 12

PostPosted: Wed Oct 04, 2006 9:22 am    Post subject: Проблемы с загрузкой Reply with quote

Имеется сервер HP Proliant DL 145

Загрузился с Лив СД для AMD64

Скомпилил ядро через genkernel all (потом подправил кое какие прараметры через menuconfig)

Установил grub

в конфиге grub.conf написал

default 0
timeout 30
splashimage=(hd0,0)/grub/splash.xpm.gz

title=Gentoo Linux 2.6.17-r8
root (hd0,0)
kernel /kernel-genkernel-x86_64-2.6.17-gentoo-r8 root=/dev/sda1 init=/linuxrc ramdisk=8192 real_root=/d
ev/sda3 udev
initrd /initramfs-genkernel-x86_64-2.6.17-gentoo-r8

После загрузки уже с винта возникает следующая ошибка

>> Determining root device
!! block device /dev/sda3 not a valid root device...
!! the root block device is not specified or not detected...
please specify a device to boot, or "shell" for a shell....
bott() ::


в чем может быть проблема?

Все что связаное с файловыми системами вкомпилил в ядро.


Вот мой dmesg c LiveDC

Bootdata ok (command line is root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squash
fs cdroot initrd=gentoo.igz vga=791 splash=silent,theme:livecd-2006.1 CONSOLE=/dev/tty1 quiet BOOT_IMAG
E=gentoo )
Linux version 2.6.17-gentoo-r7 (root@poseidon) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 SMP Tue Aug 29 01:
41:38 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)
BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000f44b0
ACPI: XSDT (v001 HP OEMXSDT 0x03000407 MSFT 0x00000097) @ 0x000000003fff0100
ACPI: FADT (v003 HP OEMFACP 0x03000407 MSFT 0x00000097) @ 0x000000003fff0281
ACPI: MADT (v001 HP OEMAPIC 0x03000407 MSFT 0x00000097) @ 0x000000003fff0380
ACPI: OEMB (v001 HP OEMBIOS 0x03000407 MSFT 0x00000097) @ 0x000000003ffff040
ACPI: SRAT (v001 HP OEMSRAT 0x03000407 MSFT 0x00000097) @ 0x000000003fff2d20
ACPI: ASF! (v016 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000003fff2e10
ACPI: DSDT (v001 HP 0ABFD08a 0x00000001 INTL 0x02002026) @ 0x0000000000000000
On node 0 totalpages: 257449
DMA zone: 2944 pages, LIFO batch:0
DMA32 zone: 254505 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x5008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:5 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:5 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfebfe000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 17, address 0xfebfe000, GSI 24-27
ACPI: IOAPIC (id[0x04] address[0xfebff000] gsi_base[28])
IOAPIC[2]: apic_id 4, version 17, address 0xfebff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
Checking aperture...
CPU 0: aperture @ 7b4c000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Built 1 zonelists
Kernel command line: root=/dev/ram0 init=/linuxrc dokeymap looptype=squashfs loop=/image.squashfs cdroo
t initrd=gentoo.igz vga=791 splash=silent,theme:livecd-2006.1 CONSOLE=/dev/tty1 quiet BOOT_IMAGE=gentoo

Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Disabling vsyscall due to use of PM timer
time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
time.c: Detected 1592.995 MHz processor.
Speakup v-2.00 CVS: Mon May 1 09:46:33 EDT 2006 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1023208k/1048512k available (2561k kernel code, 24560k reserved, 802k data, 180k init)
Calibrating delay using timer specific routine.. 3188.44 BogoMIPS (lpj=1594223)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
Using local APIC timer interrupts.
result 12445288
Detected 12.445 MHz APIC timer.
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 3185.58 BogoMIPS (lpj=1592794)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD Opteron(tm) Processor 242 stepping 08
CPU 1: Syncing TSC to CPU 0.
CPU 1: synchronized TSC with CPU 0 (last diff -63 cycles, maxerr 911 cycles)
Brought up 2 CPUs
testing NMI watchdog ... OK.
migration_cost=694
checking if image is initramfs... it is
Freeing initrd memory: 4556k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:07: ioport range 0x680-0x6ff has been reserved
pnp: 00:07: ioport range 0x295-0x296 has been reserved
pnp: 00:0a: ioport range 0xca2-0xca3 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: fe200000-feafffff
PREFETCH window: ff500000-ff5fffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: fe100000-fe1fffff
PREFETCH window: ff400000-ff4fffff
PCI: Bridge: 0000:00:06.0
IO window: b000-bfff
MEM window: fc000000-fe0fffff
PREFETCH window: ff300000-ff3fffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
squashfs: version 3.0 (2006/03/15) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for subordinate bus.
Real Time Clock Driver v1.12ac
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 )
Linux agpgart interface v0.101 (c) Dave Jones
vesafb: framebuffer at 0xfd000000, mapped to 0xffffc20000080000, using 3072k, total 8128k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA100 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
logips2pp: Detected unknown logitech mouse model 0
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
hdb: CD-W524E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 1404kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 180k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:01:00.0: OHCI Host Controller
ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:01:00.0: irq 16, io mem 0xfe0fd000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 16
ohci_hcd 0000:01:00.1: OHCI Host Controller
ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:01:00.1: irq 16, io mem 0xfe0fe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
libata version 1.20 loaded.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
JFS: nTxBlock = 8033, nTxLock = 64269
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
tg3.c:v3.59 (June 8, 2006)
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 31 (level, low) -> IRQ 17
eth0: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00
:1a:19:42:a9
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:02:03.1[B] -> GSI 28 (level, low) -> IRQ 18
eth1: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00
:1a:19:42:a8
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
tg3.c:v3.59 (June 8, 2006)
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 31 (level, low) -> IRQ 17
eth0: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00
:1a:19:42:a9
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:02:03.1[B] -> GSI 28 (level, low) -> IRQ 18
eth1: Tigon3 [partno(BCM95704) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00
:1a:19:42:a8
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.09
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 25 (level, low) -> IRQ 19
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator}
scsi0 : ioc0: LSI53C1030, FwRev=01030f00h, Ports=1, MaxQ=222, IRQ=19
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now degraded, enabled
Vendor: LSILOGIC Model: 1030 IM Rev: 1000
Type: Direct-Access ANSI SCSI revision: 02
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now degraded, enabled, resync in progress
SCSI device sda: 71020545 512-byte hdwr sectors (36363 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 71020545 512-byte hdwr sectors (36363 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Vendor: COMPAQ Model: BD03695A27 Rev: HPB6
Type: Direct-Access ANSI SCSI revision: 03
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now degraded, enabled, quiesced, resync in progress
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
mptbase: ioc0: PhysDisk is now online, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
mptbase: ioc0: PhysDisk is now online, out of sync, quiesced
target0:1:0: Beginning Domain Validation
target0:1:0: Ending Domain Validation
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now degraded, enabled, resync in progress
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
mptbase: ioc0: PhysDisk is now online
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
mptbase: ioc0: PhysDisk is now online, out of sync
target0:1:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
Vendor: COMPAQ Model: BD03695A27 Rev: HPB6
Type: Direct-Access ANSI SCSI revision: 03
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now degraded, enabled, quiesced, resync in progress
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
mptbase: ioc0: PhysDisk is now online, quiesced
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
mptbase: ioc0: PhysDisk is now online, out of sync, quiesced
target0:1:8: Beginning Domain Validation
target0:1:8: Ending Domain Validation
mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
mptbase: ioc0: volume is now degraded, enabled, resync in progress
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
mptbase: ioc0: PhysDisk is now online
mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
mptbase: ioc0: PhysDisk is now online, out of sync
target0:1:8: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
input: PC Speaker as /class/input/input2
PM: Writing back config space on device 0000:02:03.0 at offset b (was 164814e4, writing 36c01022)
PM: Writing back config space on device 0000:02:03.0 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:02:03.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:02:03.0 at offset 1 (was 2b00000, writing 2b00146)
fbsplash: console 0 using theme 'livecd-2006.1'
fbsplash: switched splash state to 'on' on console 0
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
PM: Writing back config space on device 0000:02:03.0 at offset b (was 164814e4, writing 36c01022)
PM: Writing back config space on device 0000:02:03.0 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:02:03.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:02:03.0 at offset 1 (was 2b00000, writing 2b00146)
PM: Writing back config space on device 0000:02:03.0 at offset b (was 164814e4, writing 36c01022)
PM: Writing back config space on device 0000:02:03.0 at offset 3 (was 804000, writing 804010)
PM: Writing back config space on device 0000:02:03.0 at offset 2 (was 2000000, writing 2000003)
PM: Writing back config space on device 0000:02:03.0 at offset 1 (was 2b00000, writing 2b00146)
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.


Вот мой fstab


# <fs> <mountpoint> <type> <opts> <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/sda3 / ext3 noatime 0 1
/dev/sda2 none swap sw 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0

# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0







livecd ~ # lsmod
Module Size Used by
ipv6 219744 16
pcspkr 6144 0
mptspi 16656 2
mptscsih 19456 1 mptspi
mptbase 43616 2 mptspi,mptscsih
scsi_transport_spi 20736 1 mptspi
tg3 92420 0
nfs 89808 0
lockd 50448 1 nfs
sunrpc 116936 2 nfs,lockd
jfs 142032 0
dm_mirror 18560 0
dm_mod 42320 1 dm_mirror
pdc_adma 11140 0
sata_mv 18696 0
ata_piix 13188 0
ahci 15748 0
sata_qstor 11396 0
sata_vsc 10244 0
sata_uli 9476 0
sata_sis 9860 0
sata_sx4 14596 0
sata_nv 11012 0
sata_via 10500 0
sata_svw 9732 0
sata_sil24 12804 0
sata_sil 11528 0
sata_promise 13060 0
libata 48152 15 pdc_adma,sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil24,sata_sil,sata_promise
sbp2 22280 0
ohci1394 31048 0
ieee1394 66296 2 sbp2,ohci1394
sl811_hcd 14080 0
ohci_hcd 19844 0
uhci_hcd 22032 0
usb_storage 66112 0
usbhid 35488 0
ehci_hcd 27912 0
usbcore 96800 7 sl811_hcd,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd




livecd ~ # lspci
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
00:01.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:02.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12)
00:02.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07)
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b)
01:04.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 27)
02:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
02:03.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03)
03:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)





livecd ~ # mount
tmpfs on / type tmpfs (rw)
/dev/hdb on /mnt/cdrom type iso9660 (ro)
/dev/loop0 on /mnt/livecd type squashfs (ro)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
udev on /dev type tmpfs (rw,nosuid)
devpts on /dev/pts type devpts (rw)
cachedir on /mnt/livecd/lib64/splash/cache type tmpfs (rw)
tmpfs on /mnt/livecd/lib64/splash/tmp type tmpfs (rw)
tmpfs on /mnt/livecd/lib64 type tmpfs (rw)
tmpfs on /mnt/livecd/usr/portage type tmpfs (rw)
usbfs on /proc/bus/usb type usbfs (rw,devmode=0664,devgid=85)
/dev/sda3 on /mnt/gentoo type ext3 (rw)
/dev/sda1 on /mnt/gentoo/boot type ext2 (rw)
proc on /mnt/gentoo/proc type proc (rw)






В чем может быть проблема? Может быть для рейда надо в грубе указывать еще какието дополнительные параметры?
Back to top
View user's profile Send private message
Laitr Keiows
Moderator
Moderator


Joined: 04 Jul 2005
Posts: 891
Location: Kobe, Japan

PostPosted: Wed Oct 04, 2006 1:13 pm    Post subject: Reply with quote

Что-то много у тебя понаписано. Попробуй собрать ядро вручную без genkernel.
Back to top
View user's profile Send private message
046
Apprentice
Apprentice


Joined: 21 Jul 2004
Posts: 231
Location: Yaroslavl, Russia

PostPosted: Wed Oct 04, 2006 1:37 pm    Post subject: Reply with quote

Включи в ядре поддержку Fusion MPT.

И выкинь ramdisk, они только для livecd хороши :)
Back to top
View user's profile Send private message
ZByte
Tux's lil' helper
Tux's lil' helper


Joined: 18 Aug 2004
Posts: 141
Location: Moscow, Russia

PostPosted: Wed Oct 04, 2006 1:40 pm    Post subject: Reply with quote

А какой RAID котролер стоит?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Russian All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum