sioz n00b
Joined: 12 Apr 2003 Posts: 3
|
Posted: Fri Apr 18, 2003 4:43 pm Post subject: Mitsumi CD-Writer |
|
|
Hi!
I have a Mitsumi CD-Writer but it just destroys my CDs. I think I use the wrong driver, but I don't know exactly. Here is the lo output (I hope it isn't too long):
Starting burn process.
scsidev: '00,01,00'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 2.01a08 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MITSUMI '
Identifikation : 'CR-48X5TE '
Revision : '1.8A'
Device seems to be: Philips CDD-522.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 647 MB
Total size: 743 MB (73:42.17) = 331663 sectors
Lout start: 744 MB (73:44/13) = 331663 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 28182
Starting to write CD/DVD at speed 8 in real TAO mode for single session.
Performing OPC...
Burning Track Track 01, percent done:
0%: 2 of 647 MB written (fifo 98%) [buf 77%] 18.1x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 05 73 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 2.150s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 2856960 bytes
Writing time: 16.303s
Average write speed 353.8x.
Min drive buffer fill was 77%
Fixating...
Fixating time: 33.794s
/usr/bin/cdrecord: fifo had 109 puts and 46 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 10 times full, min fill was 92%.
Burn failed.
Failed to create Data CD.
Thanks for your help!
Sioz |
|