| View previous topic :: View next topic |
| Author |
Message |
NewBlackDak
Guru
Joined: 02 Nov 2003
Posts: 512
Location: Utah County, UT
|
 Posted: Wed Jul 12, 2006 3:18 am Post subject: Ultra 5 with PCI XVR-100 |
 |
|
I've found one for cheap, and I'm trying to make it work in my Ultra 5 since the onboard graphics have been acting strange lately.
I can't make the monitor light up when attached to the Radeon though. What am I doing wrong? I'm an OBP noob, so it could be something there.
lspci:
| Code: | 00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIi
00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13)
00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13)
01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01)
01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01)
01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c)
01:03.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 03)
02:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
02:02.0 USB Controller: OPTi Inc. 82C861 (rev 10)
|
in OBP show-devs shows:
| Code: | | /pci@1f,0/pci@1/SUNW,XVR-100@1 |
I can do the following, and the onboard comes up still:
| Code: | devalias screen /pci@1f,0/pci@1/SUNW,XVR-100@1
reset-all |
silo entry:
| Code: | image = /vmlinux
label = Linux
append = "video=radeonfb" |
dmesg:
| Code: |
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 3.31.0 2001/07/25 20:36
[ 0.000000] Linux version 2.6.16-gentoo-r6 (root@sparky) (gcc version 3.4.6 (Gentoo Linux 3.4.6)) #4 Sun May 21 20:45:59 CDT 2006
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 08:00:20:a8:11:3d
[ 0.000000] On node 0 totalpages: 64865
[ 0.000000] DMA zone: 64865 pages, LIFO batch:15
[ 0.000000] DMA32 zone: 0 pages, LIFO batch:0
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] CPU[0]: Caches D[sz(16384):line_sz(32)] I[sz(16384):line_sz(32)] E[sz(2097152):line_sz(64)]
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda4 video=radeonfb
[ 0.000000] PID hash table entries: 2048 (order: 11, 65536 bytes)
[ 11.091904] Console: colour dummy device 80x25
[ 11.095259] Dentry cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 11.098239] Inode-cache hash table entries: 32768 (order: 5, 262144 bytes)
[ 11.126778] Memory: 513776k available (2752k kernel code, 944k data, 128k init) [fffff80000000000,000000001ff20000]
[ 11.127231] Calibrating delay loop... 663.55 BogoMIPS (lpj=1327104)
[ 11.219573] Mount-cache hash table entries: 512
[ 11.222735] NET: Registered protocol family 16
[ 11.225333] PCI: Probing for controllers.
[ 11.228018] PCI: Found SABRE, main regs at 000001fe00000000
[ 11.228057] SABRE: Shared PCI config space at 000001fe01000000
[ 11.231778] SABRE: DVMA at c0000000 [20000000]
[ 11.238177] PCI: Address space collision on region 1 [000001fe02000400:000001fe020004ff] of device 0000:02:01.0
[ 11.238357] PCI-IRQ: Routing bus[ 2] slot[ 1] map[0] to INO[10]
[ 11.238503] PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[14]
[ 11.238561] PCI0(PBMA): Bus running at 33MHz
[ 11.241111] PCI-IRQ: Routing bus[ 1] slot[ 1] map[0] to INO[21]
[ 11.241273] PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[0f]
[ 11.241432] PCI-IRQ: Routing bus[ 1] slot[ 3] map[0] to INO[20]
[ 11.241486] PCI0(PBMB): Bus running at 33MHz
[ 11.241680] ebus0: [auxio] [power] [SUNW,pll] [se] [su] [su] [ecpp] [fdthree] [eeprom] [flashprom] [SUNW,CS4231]
[ 11.247332] power: Control reg at 000001fff1724000 ... powerd running.
[ 11.250185] SCSI subsystem initialized
[ 11.253242] usbcore: registered new driver usbfs
[ 11.253537] usbcore: registered new driver hub
[ 11.263571] Total HugeTLB memory allocated, 0
[ 11.264236] VFS: Disk quotas dquot_6.5.1
[ 11.264455] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 11.265174] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.301860] Initializing Cryptographic API
[ 11.301928] io scheduler noop registered (default)
[ 11.301998] io scheduler deadline registered
[ 11.316157] rtc_init: no PC rtc found
[ 11.316522] atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
[ 11.318161] atyfb: 4M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
[ 11.407498] Console: switching to colour frame buffer device 144x56
[ 11.407736] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 11.408482] radeonfb: Found Open Firmware ROM Image
[ 12.895317] xtal calculation failed: 450
[ 12.895469] radeonfb: Used default PLL infos
[ 12.895637] radeonfb: Reference=27.00 MHz (RefDiv=24) Memory=166.00 Mhz, System=166.00 MHz
[ 12.895927] radeonfb: PLL min 12000 max 35000
[ 14.095319] radeonfb: Monitor 1 type CRT found
[ 14.095492] radeonfb: EDID probed
[ 14.095621] radeonfb: Monitor 2 type no found
[ 14.131552] radeonfb (0000:02:01.0): ATI Radeon QY
[ 14.140379] su0 at 0x000001fff13062f8 (irq = 4,7ea) is a 16550A
[ 14.140668] su1 at 0x000001fff13083f8 (irq = 9,7e9) is a 16550A
[ 14.141714] mice: PS/2 mouse device common for all mice
[ 14.144044] loop: loaded (max 8 devices)
[ 14.144531] isa bounce pool size: 16 pages
[ 14.145008] nbd: registered device at major 43
[ 14.148934] sunhme.c:v2.02 8/24/03 David S. Miller (davem@redhat.com)
[ 14.150351] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:a8:11:3d
[ 14.151032] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 14.151274] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 14.151807] CMD646: IDE controller at PCI slot 0000:01:03.0
[ 14.152038] CMD646: chipset revision 3
[ 14.152187] CMD646: chipset revision 0x03, MultiWord DMA Force Limited
[ 14.152471] CMD646: 100% native mode on irq 4,7e0
[ 14.152668] ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio
[ 14.153068] ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio
[ 14.158465] Probing IDE interface ide0...
[ 14.447492] hda: Maxtor 5T020H2, ATA DISK drive
[ 14.791840] input: Sun Type 5 keyboard as /class/input/input0
[ 14.798254] input: Sun Mouse as /class/input/input1
[ 15.123579] ide0 at 0x1fe02c00000-0x1fe02c00007,0x1fe02c0000a on irq 4,7e0
[ 15.129575] Probing IDE interface ide1...
[ 15.527463] hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
[ 16.203366] ide1 at 0x1fe02c00010-0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide0)
[ 16.211043] hda: max request size: 128KiB
[ 16.220365] hda: 40021632 sectors (20491 MB) w/2048KiB Cache, CHS=39704/16/63, (U)DMA
[ 16.227213] hda: cache flushes not supported
[ 16.234365] hda: hda1 hda2 hda3 hda4
[ 16.250300] hdc: ATAPI 32X CD-ROM drive, 128kB Cache
[ 16.257594] Uniform CD-ROM driver Revision: 3.20
[ 16.266704] rtc_sun_init: Registered Mostek RTC driver.
[ 16.274764] aoe: aoe_init: AoE v2.6-14 initialised.
[ 16.282614] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 16.282832] ohci_hcd 0000:02:02.0: OHCI Host Controller
[ 16.291041] ohci_hcd 0000:02:02.0: new USB bus registered, assigned bus number 1
[ 16.299075] ohci_hcd 0000:02:02.0: irq 10,7d4, io mem 0x1ff10040000
[ 16.361711] usb usb1: configuration #1 chosen from 1 choice
[ 16.370179] hub 1-0:1.0: USB hub found
[ 16.378657] hub 1-0:1.0: 2 ports detected
[ 16.487660] USB Universal Host Controller Interface driver v2.3
[ 16.751329] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 16.918318] usb 1-2: configuration #1 chosen from 1 choice
[ 16.929827] usbcore: registered new driver hiddev
[ 16.946656] input: HID 062a:0000 as /class/input/input2
[ 16.956084] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:02:02.0-2
[ 16.965265] usbcore: registered new driver usbhid
[ 16.974310] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 16.983710] NET: Registered protocol family 2
[ 17.031590] IP route cache hash table entries: 4096 (order: 2, 32768 bytes)
[ 17.041822] TCP established hash table entries: 16384 (order: 4, 131072 bytes)
[ 17.051904] TCP bind hash table entries: 16384 (order: 4, 131072 bytes)
[ 17.062061] TCP: Hash tables configured (established 16384 bind 16384)
[ 17.071457] TCP reno registered
[ 17.081312] TCP bic registered
[ 17.090637] NET: Registered protocol family 1
[ 17.100037] NET: Registered protocol family 17
[ 17.129748] kjournald starting. Commit interval 5 seconds
[ 17.139223] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.148936] VFS: Mounted root (ext3 filesystem) readonly.
[ 1.693927] Adding 976736k swap on /dev/hda2. Priority:-1 extents:1 across:976736k
[ 2.173126] EXT3 FS on hda4, internal journal
[ 9.499633] eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
|
_________________
Gentoo systems.
X2 4200+@2.6 - Athy
X2 3600+ - Myth
UltraSparc5 440 - sparcy |
|
| Back to top |
|
 |
Weeve
Retired Dev
Joined: 30 Oct 2002
Posts: 641
|
| Posted: Wed Jul 12, 2006 8:53 pm Post subject: |
|
|
For me, I have to use the VGA port rather than the DVI port or I end up with what you are subscribing. This however is on an Blade 1000 with no onboard video.
You may have to make a new nvalias for the XVR-100 and then set the "output-device" variable in OBP to the new nvalias you made for the XVR-100. |
|
| Back to top |
|
|
NewBlackDak
Guru
Joined: 02 Nov 2003
Posts: 512
Location: Utah County, UT
|
| Posted: Mon Jul 17, 2006 4:18 pm Post subject: |
|
|
I tried to nvalias video /pci@1f,0/pci@1/SUNW,XVR-100@1, and set it as the output device. I had neither video device output anything at that point.
I thought maybe the card was bad, but I put in a K6-2 box. I can't boot from it, but once the OS loads it shows up and works fine as a secondary card.
_________________
Gentoo systems.
X2 4200+@2.6 - Athy
X2 3600+ - Myth
UltraSparc5 440 - sparcy |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on Sparc
