Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
kt400 e dma
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Thu Apr 10, 2003 5:44 pm    Post subject: kt400 e dma Reply with quote

ciao ragazzi,ho una curiosità che spero qualcuno di voi possa soddisfare.
ho dovuto cambiare la scheda madre,ed ho messo una asus con chipset kt400 che avevo da una parte,visto che con varie distribuzioni non riuscivo a settare ad 1 il dma,se non con le patch 2.4.21-pre.ho ricompilato il kernel con il supporto per il nuovo chipset e il dma va alla grande sia sull'hd che sul lettore dvd,eppure uso il kernel vanilla,che per quello che so io ha problemi con questo chipset,ho sentito diverse altre persone che per farlo andare hanno pure loro applicato le patch.non me lo spiego,come fa a funzionare adesso con gentoo?che fa i miracoli? :roll:
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Fri Apr 11, 2003 6:25 pm    Post subject: Reply with quote

dovrò invecchiare con questo dubbio vero? :roll:
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Fri Apr 11, 2003 6:30 pm    Post subject: Reply with quote

Piu' che altro e' impossibile. Se il kernel non ha il supporto, e' impossibile che gentoo faccia qualcosa.
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Fri Apr 11, 2003 7:01 pm    Post subject: Reply with quote

e infatti non riesco proprio a capire, a meno che le altre volte avevo impostato erroneamente qualche altra opzione mentre adesso no,boh,l'importante è che adesso funziona
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Fri Apr 11, 2003 7:11 pm    Post subject: Reply with quote

sarebbe interessante vedere il dmesg adesso e di "prima".
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
Yans
Apprentice
Apprentice


Joined: 09 Feb 2003
Posts: 171
Location: [TI] Switzerland

PostPosted: Fri Apr 11, 2003 8:18 pm    Post subject: Reply with quote

gia perche non posti il dmesg :roll:
_________________
¿ Which do ARMS obtain, the peace in the future or the nightmare in the past ?
"There are only 10 types of people in the world: Those who understand binary, and those who don't"
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Fri Apr 11, 2003 8:48 pm    Post subject: Reply with quote

questo è il dmesg attuale
tashunka root # dmesg
Linux version 2.4.20 (root@tashunka.witko.it) (gcc version 3.2.2) #2 SMP Thu Apr 10 05:12:45 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
767MB LOWMEM available.
On node 0 totalpages: 196604
zone(0): 4096 pages.
zone(1): 192508 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=gentoo ro root=30b hdb=ide-scsi hdc=ide-scsi
ide_setup: hdb=ide-scsi
ide_setup: hdc=ide-scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 2000.121 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 773668k/786416k available (1854k kernel code, 12360k reserved, 684k data, 124k init, 0k highmem)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU0: AMD Athlon(TM) XP 2400+ stepping 01
per-CPU timeslice cutoff: 731.38 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2000.1599 MHz.
..... host bus clock speed is 266.6880 MHz.
cpu: 0, clocks: 2666880, slice: 1333440
CPU0<T0:2666880,T1:1333440,D:0,S:1333440,C:2666880>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xf1730, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: PIONEER DVD-RW DVR-104, ATAPI CD/DVD-ROM drive
hdc: PHILIPS CDRW2410A, ATAPI CD/DVD-ROM drive
hdd: JLMS DVD-ROM LTD-166S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03eeae4, I/O limit 4095Mb (mask 0xffffffff)
hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63, UDMA(133)
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, (U)DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 < p5 p6 p7 p8 p9 p10 p11 >
floppy0: no floppy controllers found
PPP generic driver version 2.4.2
Linux video capture interface: v1.00
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 690M
agpgart: Unsupported Via chipset (device id: 3189), you might want to try agp_try_unsupported=1.
agpgart: no supported devices found.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PIONEER Model: DVD-RW DVR-104 Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PHILIPS Model: CDRW2410A Rev: B1.6
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
es1371: version v0.30 time 05:05:52 Apr 10 2003
Creative EMU10K1 PCI Audio Driver, version 0.20, 05:05:43 Apr 10 2003
PCI: Found IRQ 10 for device 00:0e.0
emu10k1: EMU10K1 rev 7 model 0x8064 found, IO at 0xd400-0xd41f, IRQ 10
ac97_codec: AC97 Audio codec, id: v8(SigmaTel STAC9708)
emu10k1: SBLive! 5.1 card detected
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:0f.2
PCI: Sharing IRQ 11 with 00:0a.0
PCI: Sharing IRQ 11 with 01:00.0
hcd.c: ehci-hcd @ 00:0f.2, NEC Corporation USB 2.0
hcd.c: irq 11, pci mem f0804000
usb.c: new USB bus registered, assigned bus number 1
hcd/ehci-hcd.c: USB 2.0 support enabled, EHCI rev 0.95
hub.c: USB hub found
hub.c: 5 ports detected
PCI: Found IRQ 3 for device 00:10.3
IRQ routing conflict for 00:10.0, have irq 9, want irq 3
IRQ routing conflict for 00:10.1, have irq 9, want irq 3
IRQ routing conflict for 00:10.2, have irq 9, want irq 3
IRQ routing conflict for 00:10.3, have irq 9, want irq 3
hcd.c: ehci-hcd @ 00:10.3, VIA Technologies, Inc. USB 2.0
hcd.c: irq 9, pci mem f0806000
usb.c: new USB bus registered, assigned bus number 2
hcd/ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 6 ports detected
PCI: Found IRQ 6 for device 00:0f.0
PCI: Sharing IRQ 6 with 00:09.0
usb-ohci.c: USB OHCI at membase 0xf0808000, IRQ 6
usb-ohci.c: usb-00:0f.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 9 for device 00:0f.1
PCI: Sharing IRQ 9 with 00:0c.0
PCI: Sharing IRQ 9 with 00:0c.1
usb-ohci.c: USB OHCI at membase 0xf080a000, IRQ 9
usb-ohci.c: usb-00:0f.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:0f.2-4, assigned address 2
usb.c: USB device 2 (vend/prod 0x5e3/0x702) is not claimed by any active driver.
usb.c: registered new driver usbscanner
scanner.c: 0.4.6:USB Scanner Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: IBM-DJSA Model: -210 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
/dev/scsi/host1/bus0/target0/lun0: p1 < p5 >
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
reiserfs:warning: CONFIG_REISERFS_CHECK is set ON
reiserfs:warning: - it is slow mode for debugging.
reiserfs: checking transaction log (device 03:0b) ...
journal-1153: found in header: first_unflushed_offset 6692, last_flushed_trans_id 81338
journal-1206: Starting replay from offset 6692, trans_id 81339
journal-1299: Setting newest_mount_id to 99
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 124k freed
Adding Swap: 128484k swap-space (priority -1)
PPP Deflate Compression module registered
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:0f.2
PCI: Sharing IRQ 11 with 01:00.0
eth0: RealTek RTL8139 Fast Ethernet at 0xf08e6000, 00:10:a7:1d:27:cc, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 1106:3189 (VIA Technologies, Inc.)
bttv: Bt8xx card found (0).
PCI: Found IRQ 9 for device 00:0c.0
PCI: Sharing IRQ 9 with 00:0c.1
PCI: Sharing IRQ 9 with 00:0f.1
bttv0: Bt878 (rev 2) at 00:0c.0, irq: 9, latency: 32, mmio: 0xe7000000
bttv0: detected: ATI TV Wonder [card=63], PCI subsystem ID is 1002:0001
bttv0: using: BT878(ATI TV-Wonder) [card=63,autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: using tuner=19
bttv0: i2c: checking for MSP34xx @ 0x80... found
i2c-core.o: driver i2c msp3400 driver registered.
msp34xx: init: chip=MSP3415D-B3, has NICAM support
msp3410: daemon started
bttv0: i2c attach [client=MSP3415D-B3,ok]
i2c-core.o: client [MSP3415D-B3] registered to adapter [bt848 #0](pos. 0).
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
bttv0: i2c attach [client=Temic PAL* auto (4006 FN5),ok]
i2c-core.o: client [Temic PAL* auto (4006 FN5)] registered to adapter [bt848 #0](pos. 1).
bttv0: registered device video0
bttv0: registered device vbi0
reiserfs:warning: CONFIG_REISERFS_CHECK is set ON
reiserfs:warning: - it is slow mode for debugging.
reiserfs: checking transaction log (device 03:09) ...
journal-1153: found in header: first_unflushed_offset 1755, last_flushed_trans_id 501
journal-1206: Starting replay from offset 1755, trans_id 502
journal-1299: Setting newest_mount_id to 95
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs:warning: CONFIG_REISERFS_CHECK is set ON
reiserfs:warning: - it is slow mode for debugging.
reiserfs: checking transaction log (device 03:08) ...
journal-1153: found in header: first_unflushed_offset 73, last_flushed_trans_id 31
journal-1206: Starting replay from offset 73, trans_id 32
journal-1299: Setting newest_mount_id to 19
Using r5 hash to sort names
ReiserFS version 3.6.25
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
spurious 8259A interrupt: IRQ7.
NVRM: AGPGART: unable to retrieve symbol table
bttv0: PLL: 28636363 => 35468950 ... ok
tuner: TV freq (0.-6) out of range (44-958)
tuner: TV freq (0.-6) out of range (44-958)
NVRM: AGPGART: unable to retrieve symbol table

almeno se ho impostato male qualcosa approfitto di voi per capire cosa :lol: ,il dmesg vecchio lo tovate qui
https://forums.gentoo.org/viewtopic.php?t=45075&start=25
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Sat Apr 12, 2003 5:53 am    Post subject: Reply with quote

Cambia il driver usato.

Vecchio:
Code:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 15
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS735


Nuovo:
Code:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1


Quindi il kernel non e' proprio lo stesso... oppure ti sbagli!!! ;)
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Sat Apr 12, 2003 9:12 am    Post subject: Reply with quote

mah,io adesso su gentoo stò usando il 2.4.20 vanilla,usando lo stesso kernel su slack e debian quando provavo a settare ad 1 il dma con hdparm mi diceva
operation not permitted
i driver del chipset è normale che non siano i soliti nei due dmesg,ho ricompilato il kernel con il supporto al chipset via quando ho cambiato scheda madre e levato il supporto al sis.mi viene da pensare solo che nei casi precedenti non avevo tenuto conto di altri parametri che influiscono sul dma,peccato non ho i config dei casi in questione ma solo dell'ultimo,ma come già detto,adesso funziona tutto,troppe domande mi bruciano il cervello :lol: ,come al solito vi ringrazio dell'aiuto
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Sat Apr 12, 2003 9:21 am    Post subject: Reply with quote

Non ho capito: e' normale che ora funzioni e prima no, il chipset e' differente! O non ci sto capendo niente io??? in questi giorni tutto e' possibile............
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Sat Apr 12, 2003 11:59 am    Post subject: Reply with quote

probabilmente mi sono spiegato male.mesi fa avevo montato la scheda madre asus con chipset kt400 e con il kernel 2.4.20 su suse,debian e slackware,se provavo con hdparm a settare ad 1 il dma avevo questo messaggio
operation not permitted
chiaramente nel kernel avevo attivato il supporto al chipset via.
cercando in giro mi sono accorto che il supporto per questo chipset con quel kernel era scarso,l'unica era applicare le patch pre 2.4.21.in quel modo sono riuscito ad attivare ad 1 il dma ma ancora c'era qualche problema,specialmente sulle catture video con mencoder,qualcuno mi disse che il supporto era migliorato ma che fino all'uscita del 2.4.21 definitivo il supporto non sarebbe mai stato pieno.allora ho comprato la scheda madre ecs con chipset sis,su questo ero sicuro che il supporto al chipset era totale,infatti non ho avuto problemi di nessun tipo con questa scheda madre.adesso ho dovuto rimontare la asus con kt400,ho ricompilato il kernel per cambiare il chipset attivando il via ed escludendo il sis,riavvio il pc,controllo il dma ed è attivato.il kernel che uso è il 2.4.20 vanilla,cioè quello che nei casi precedenti avevo installato su debian e slackware.ecco quello che non mi spiego,se il kernel 2.4.20-vanilla non ha il supporto per un chipset,il dma non dovrebbe funzionare su nessuna distribuzione a meno di patch,invece a me funziona su gentoo e non funzionava su debian e slackware
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Sat Apr 12, 2003 12:55 pm    Post subject: Reply with quote

Sei sicuro di aver utilizzato un kernel "liscio" sulle altre distribuzioni? Con liscio intendo non "taroccato" dalle distribuzioni in uso (nulla c'entra con le patch pre-21).
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Sat Apr 12, 2003 12:57 pm    Post subject: Reply with quote

si,parlo del kernel scaricato da kernel.org
Back to top
View user's profile Send private message
cerri
Bodhisattva
Bodhisattva


Joined: 05 Mar 2003
Posts: 2957
Location: # init S

PostPosted: Sat Apr 12, 2003 11:19 pm    Post subject: Reply with quote

Beh, allora l'unica cosa che mi viene in mente e' qualche opzione non abilitata a dovere...
_________________
Enjoy your freedom.
Sex is like hacking. You get in, you get out, and you hope you didnt leave something behind that can be traced back to you.
<----------------------->
Andrea Cerrito
Back to top
View user's profile Send private message
almafer
Guru
Guru


Joined: 21 Mar 2003
Posts: 317
Location: Firenze

PostPosted: Sun Apr 13, 2003 1:53 pm    Post subject: Reply with quote

si è la cosa più probabile a questo punto
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum