| View previous topic :: View next topic |
| Author |
Message |
viezevis
n00b
Joined: 10 May 2006
Posts: 2
|
 Posted: Wed May 10, 2006 7:56 pm Post subject: USB transfer becoming extremely slow |
 |
|
I'm running gentoo for about a month now and got everything to work pretty nice. Howere I have a very annoying problem with my USB memory stick. When I plug it in I can mount and access the drive normally, but after a minute or less, it becomes extremely slow(can't copy any faster as 14 KiB/s or so). I already tried searching the forum, disabling sync etc. but nothing seems to help. Anyone knows what the problem might be? Problem is occuring with every stick and they al work fine under windows so...
This is my dmesg output:
| Code: |
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
sd 2:0:0:0: SCSI error: return code = 0x70000
end_request: I/O error, dev sda, sector 40896
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
sd 2:0:0:0: SCSI error: return code = 0x70000
end_request: I/O error, dev sda, sector 40904
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
sd 2:0:0:0: SCSI error: return code = 0x70000
end_request: I/O error, dev sda, sector 40912
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
sd 2:0:0:0: SCSI error: return code = 0x70000
end_request: I/O error, dev sda, sector 40920
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
sd 2:0:0:0: SCSI error: return code = 0x70000
end_request: I/O error, dev sda, sector 40928
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
usb 2-2.2: reset full speed USB device using uhci_hcd and address 6
|
it continues to add stuff like this while copying to the drive...
lspci output:
| Code: | 00:00.0 Host bridge: Intel Corporation 82845 845 (Brookdale) Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corporation 82845 845 (Brookdale) Chipset AGP Bridge (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #2) (rev 12)
01:00.0 VGA compatible controller: nVidia Corporation NV15 [GeForce2 GTS/Pro] (rev a3)
02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
02:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
|
|
|
| Back to top |
|
 |
Mickael
Advocate
Joined: 05 Sep 2005
Posts: 2387
Location: ~Belfort! - France - EU
|
| Posted: Thu May 11, 2006 6:53 am Post subject: |
|
|
Hi,
have you got this crash with an other kernel?
_________________
À LIRE : COMMENT POSTER ET OBTENIR DE L'AIDE ?
Qui suis-je ? Bon j'ai relu, comme d'habitude, je suis bon a rien le vendredi
Qui suis-je ? Je ne serai jamais modo |
|
| Back to top |
|
|
viezevis
n00b
Joined: 10 May 2006
Posts: 2
|
| Posted: Sun May 14, 2006 9:27 pm Post subject: |
|
|
| Already tried 3 different kernels, all gentoo-sources: 2.6.15-r1, 2.6.16-r3 and 2.6.16-r5 |
|
| Back to top |
|
|
Mickael
Advocate
Joined: 05 Sep 2005
Posts: 2387
Location: ~Belfort! - France - EU
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
