Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[ATI] Problem z akceleracja, jako user
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt
View previous topic :: View next topic  
Author Message
kordin
n00b
n00b


Joined: 20 Dec 2005
Posts: 2

PostPosted: Tue Dec 20, 2005 5:47 pm    Post subject: [ATI] Problem z akceleracja, jako user Reply with quote

Czesc
Mam nastepujacy problem, po wgraniu sterownikow do karty ATI i skonfigurowaniu fglrxconfig (wydalem polecenie, obsluge tego urzadzenia bez zadnych restrykcji dla wszystkich uzytkownikow), a nie moge uruchomic gry pod zwyklym userem, dziala tylko pod root'em. Sterowniki sa skonfigurowane raczej poprawnie, poniewaz pod root'em gra dziala swietnie (dokladnie True Combat Elite). Gdy uruchomie gre jako user, pojawia sie czarny ekran, po chwili pokazuje sie cieniutki pasek na dole ekranu, ktory jest przeklamany tzn, tak jakby scisnac caly obraz na wysokosc jednego pixela. Niestety nie dziala Ctr+Alt+Space, Alt+Tab musze zrestartowac komputer.
System to vidalinux 1.2 z kernelem vmlinuz-2.6.13-vidalinux, srodowisko graficzne to Gnome 2.10.1.

Code:

# File: xorg.conf

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc104"
    Option "XkbLayout"   "pl"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   30-70
    VertRefresh 50-160
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "(null)"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
    Option "GammaCorrectionI"           "0x06419064"
    Option "GammaCorrectionII"          "0x06419064"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    Option "CapabilitiesEx"             "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "yes"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=4153
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###


Code:

$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
    GLX_ATI_render_texture
GLX extensions:
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
    GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9550 Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)
OpenGL extensions:
    GL_ARB_multitexture, GL_EXT_texture_env_add, GL_EXT_compiled_vertex_array,
    GL_S3_s3tc, GL_ARB_depth_texture, GL_ARB_fragment_program,
    GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
    GL_ARB_multisample, GL_ARB_occlusion_query, GL_ARB_point_parameters,
    GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
    GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
    GL_ARB_vertex_blend, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program,
    GL_ARB_vertex_shader, GL_ARB_window_pos, GL_ATI_draw_buffers,
    GL_ATI_element_array, GL_ATI_envmap_bumpmap, GL_ATI_fragment_shader,
    GL_ATI_map_object_buffer, GL_ATI_separate_stencil,
    GL_ATI_texture_env_combine3, GL_ATI_texture_float,
    GL_ATI_texture_mirror_once, GL_ATI_vertex_array_object,
    GL_ATI_vertex_attrib_array_object, GL_ATI_vertex_streams,
    GL_ATIX_texture_env_combine3, GL_ATIX_texture_env_route,
    GL_ATIX_vertex_shader_output_point_size, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_minmax,
    GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_object,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
    GL_EXT_texgen_reflection, GL_EXT_texture3D,
    GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_EXT_vertex_shader, GL_HP_occlusion_test, GL_NV_blend_square,
    GL_NV_occlusion_query, GL_NV_texgen_reflection, GL_SGI_color_matrix,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  1 0 None
0x24 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  1 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  1 0 None
0x26 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  1 0 None
0x27 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  1 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  1 0 None
0x29 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  1 0 None
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  1 0 None
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  1 0 None
0x2c 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  1 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  1 0 None
0x2e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  1 0 None
0x2f 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  1 0 None
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  1 0 None
0x31 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  1 0 None
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  1 0 None


Code:

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9550 Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)

Pozdrawiam
Back to top
View user's profile Send private message
Johnny_Bit
Apprentice
Apprentice


Joined: 30 Aug 2005
Posts: 242
Location: Poland

PostPosted: Tue Dec 20, 2005 6:11 pm    Post subject: Reply with quote

Man, Vida Linux to Nie gentoo... Z resztą, czy skonfigurowałeś wszystko zgodnie z instrukcją, bo widzis, jak się konfiguruje gentoo to jest genialny handbook, wiki, itp i tam zwykle się zagląda, i mi jakoś przy Radeonie 9800 pro nigdy takie kwiatki nie wyskakiwały...
Back to top
View user's profile Send private message
nigdydosc
n00b
n00b


Joined: 20 Sep 2005
Posts: 38
Location: Jaroslaw, Poland

PostPosted: Tue Dec 20, 2005 6:21 pm    Post subject: Reply with quote

Johnny_Bit wrote:
Man, Vida Linux to Nie gentoo... Z resztą, czy skonfigurowałeś wszystko zgodnie z instrukcją, bo widzis, jak się konfiguruje gentoo to jest genialny handbook, wiki, itp i tam zwykle się zagląda, i mi jakoś przy Radeonie 9800 pro nigdy takie kwiatki nie wyskakiwały...


hmm uzywałem kiedys VLOS i jak dla mnie to było prawie gentoo rozniło sie właściwie tylko instalacja po emergach to juz było zwykle gentoo. A co do problemu samego w sobie to nie bardzo wiem jak ci pomoc :/
_________________
Miejsce na Twoją reklamę.
Back to top
View user's profile Send private message
13Homer
Guru
Guru


Joined: 12 Jul 2005
Posts: 461

PostPosted: Wed Dec 21, 2005 8:18 am    Post subject: Reply with quote

Może sprawdź najpierw logi Xorg (/var/log/Xorg.0.log) i popatrz, czy nie masz gdzieś jakichś ostrzeżeń (WW) czy wręcz błędów (EE). Najprawdopodobniej chodzi o uprawnienia.
U mnie nigdy Xorg nie poszedł na configu wygenerowanym przez fglrxconfig, zawsze musiałem coś poprawić. I nie pytaj co, bo robiłem to dość dawno temu i już nie pamiętam :)
_________________
Lenovo ThinkPad R61 / C2D@2.6.24 / nVidia Quatro NVS 140M / 2 GB RAM
Back to top
View user's profile Send private message
Callem
n00b
n00b


Joined: 20 May 2004
Posts: 64

PostPosted: Wed Dec 21, 2005 1:40 pm    Post subject: Reply with quote

Będę strzelał ale może pomoże:
Sprawdź czy masz jako user pełne prawa do katalogu /dev/shm
Upewnij się, że masz załadowany moduł fglrx i ustawiony opengl na ati.

BTW. Jeśli ktoś ma 64bit system i opengl działa jakby chciał a nie mógł to można spróbować:
export LIBGL_DRIVERS_PATH=/usr/lib32/modules/dri
w przypadku ATI. Nie wiem czy z nVidią jest podobnie.
Back to top
View user's profile Send private message
13Homer
Guru
Guru


Joined: 12 Jul 2005
Posts: 461

PostPosted: Wed Dec 21, 2005 2:32 pm    Post subject: Reply with quote

Callem wrote:

Upewnij się, że masz załadowany moduł fglrx i ustawiony opengl na ati.

BTW. Jeśli ktoś ma 64bit system i opengl działa jakby chciał a nie mógł to można spróbować:
export LIBGL_DRIVERS_PATH=/usr/lib32/modules/dri
w przypadku ATI. Nie wiem czy z nVidią jest podobnie.

Ależ jemu działa akceleracja, z tym, że tylko na użytkowniku root. Oznacza to, że konfiguracja jako taka jest OK (włączając to opengl ati).
_________________
Lenovo ThinkPad R61 / C2D@2.6.24 / nVidia Quatro NVS 140M / 2 GB RAM
Back to top
View user's profile Send private message
kordin
n00b
n00b


Joined: 20 Dec 2005
Posts: 2

PostPosted: Sun Dec 25, 2005 9:08 am    Post subject: Reply with quote

A wiec tak, dzieki za wszelkie podpowiedzi. Mam kernela 2.6.14-r5 oraz sterowniki ATI 8.20.8 (te sterowniki od starszych sa u mnie wydajniejsze na glxgears o ok 20% ), sa to x11-drivers/ati-drivers nie x11-apps/ati-drivers-extra
, czy to jest jakas roznica ?. Wiem co zle zrobilem, moze inaczej czego nie zrobilem, a mianowicie nie dodalem modulu "agpgart", taki komuikat (EE) byl w xorg.0.log, wiec
Code:
 # lspci | grep AGP
0000:00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 03)

W sekcji Device Drivers ---> Character devices ---> mam
Code:
--- /dev/agpgart (AGP Support)
---   Intel 440LX/BX/GX, I8xx and E7x05 chipset support

Nie moge tego zaznaczyc, ani jako modul ani na stale, czyli pewnie musze spelniac jakies wymagania (cos nie zaznaczylem ? ;(). I to jest najgorsze ze nie wiem co zaznaczyc, oczywiscie jest help (shift+/), wiec mam:
dla --- /dev/agpgart (AGP Support)
Code:
Symbol: AGP [=y]                                                                                                   
   Prompt: /dev/agpgart (AGP Support)                                                                                 
     Defined at drivers/char/agp/Kconfig:1                                                                             
     Depends on: (ALPHA || IA64 || PPC || X86) && !GART_IOMMU                                                         
     Location:                                                                                                         
       -> Device Drivers                                                                                               
         -> Character devices                                                                                         
     Selected by: FB_I810 && FB && EXPERIMENTAL && PCI && X86 && !X86_64 || FB_INTEL && FB && EXPERIMENTAL && PCI && X │

oraz dla --- Intel 440LX/BX/GX, I8xx and E7x05 chipset support
Code:
Symbol: AGP_INTEL [=y]                                                                                             
   Prompt: Intel 440LX/BX/GX, I8xx and E7x05 chipset support                                                           
     Defined at drivers/char/agp/Kconfig:79                                                                           
     Depends on: AGP && X86                                                                                           
     Location:                                                                                                         
       -> Device Drivers                                                                                               
         -> Character devices                                                                                         
           -> /dev/agpgart (AGP Support) (AGP [=y])                                                                   
     Selected by: FB_I810 && FB && EXPERIMENTAL && PCI && X86 && !X86_64 || FB_INTEL && FB && EXPERIMENTAL && PCI && X


Wczesniej mialem Mandrive 2005 LE, tam wystarczylo miec zrodlo kernela i ten modul sam sie dodawal, tzn nie musialem ingerowac w jajko. Prosze o podpowiedz co z tym zrobic.

Do Johnny_Bit: Zawsze mozna pobrac ISO i zobaczyc

Pozdrawiam
Back to top
View user's profile Send private message
koval_ski
n00b
n00b


Joined: 06 Dec 2005
Posts: 74
Location: Poland, Wrocław

PostPosted: Fri Jan 27, 2006 2:37 am    Post subject: Reply with quote

Miałem prawie identyczny problem, umnie pomogło to: https://forums.gentoo.org/viewtopic-t-424668-highlight-libgl+error+drm+operation+permitted.html
Back to top
View user's profile Send private message
Xax
Guru
Guru


Joined: 24 Jul 2003
Posts: 417
Location: Poland, Gliwice, Trynek

PostPosted: Fri Jan 27, 2006 9:41 am    Post subject: Reply with quote

Podobny do Gentoo czy nie, to forum Gentoo i tylko Gentoo -> szczegoly w apelu (https://forums.gentoo.org/viewtopic-t-262564.html), pkt 3.

Moderatora tu widac jeszcze nie bylo bo jak dotychczas wszyscy artysci z vidalinux dostawali locka. Tym razem ma byc inaczej ?
Back to top
View user's profile Send private message
piotruspan
Apprentice
Apprentice


Joined: 27 Apr 2004
Posts: 155
Location: Otwock Poland

PostPosted: Tue Jan 31, 2006 3:36 am    Post subject: Reply with quote

już im chyba to vidalinux naprawili bo wyszła nowa wersja
Quote:
VLOS 1.2.1-r2 available
Monday, 30 January 2006

i już:
Quote:
Nvidia and Ati drivers working

na szczęście :-)
Back to top
View user's profile Send private message
milu
Bodhisattva
Bodhisattva


Joined: 03 May 2004
Posts: 1122
Location: Poland, Konstancin-Jeziorna

PostPosted: Tue Jan 31, 2006 12:40 pm    Post subject: Reply with quote

@kordin: zanim napiszesz cokolwiek na forum zapoznaj się z Apelem!!

@Xax: faktycznie jakoś umknął mi ten wątek wcześniej.

No a jako że to vidalinux a nie gentoo(mimo że niewielkie różnice) to Lock.
_________________
Pozdrawiam,
Milu
------------------------------------
Registered Linux User: #246079

Zanim zadasz pytanie przeczytaj to dokładnie!!
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum