| View previous topic :: View next topic |
| Author |
Message |
red_over_blue
Guru
Joined: 16 Dec 2002
Posts: 310
|
 Posted: Thu Mar 13, 2003 5:56 pm Post subject: dvd::rip - is this normal??? |
 |
|
Well, after finally getting DVD::RIP to read my DVDs, I now have another delema.
I want to back up my dvd collection to VCD. I rip the track to the HD, and then go to the transcode tab. I select target format (S)VCD and the codec as VCD. I tell it to span two 730 meg disks, and then hit "Transcode + Split"
It starts to encode video title #1, single pass, but the ETA is like 7 minutes. It encodes for the 7 minutes, then restarts title #1 with same approximate ETA.
I checked the logs and am getting:
| Quote: |
Thu Mar 13 08:43:56 2003 Starting job (1): Transcoding video - title #1, single pass
Thu Mar 13 08:43:56 2003 Executing command: dr_exec transcode -a 0 -x vob -i /tmp/we_were/vob/001 -F 1,'-B 251 -S 796 ' --export_asr 2 -b 224 -s 1.138 --a52_drc_off -V -f 24,1 -g 720x480 -M 2 -j 0,32,0,32 -Y -20,0,-20,0 -B 35,38,8 -y mpeg2enc,mp2enc -E 44100 --psu_mode --nav_seek /tmp/we_were/tmp/we_were-001-nav.log --no_split -o /tmp/we_were/avi/001/we_were-001 --print_status 20 && echo DVDRIP_SUCCESS
Thu Mar 13 08:43:57 2003 Job has PID 5913
Thu Mar 13 08:44:56 2003 Transcoding video - title #1, single pass: 10% done.
Thu Mar 13 08:45:50 2003 Transcoding video - title #1, single pass: 20% done.
Thu Mar 13 08:46:46 2003 Transcoding video - title #1, single pass: 30% done.
Thu Mar 13 08:47:43 2003 Transcoding video - title #1, single pass: 40% done.
Thu Mar 13 08:48:00 2003 Aborting command. Sending signal 1 to PID 5913...
Thu Mar 13 08:48:00 2003 Aborting job: Transcoding video - title #1, single pass
Thu Mar 13 08:49:01 2003 This task needs about 4218 MB, 11475 MB are free.
Thu Mar 13 08:49:01 2003 Starting job (1): Transcoding video - title #1, single pass
Thu Mar 13 08:49:01 2003 Executing command: dr_exec transcode -a 0 -x vob -i /tmp/we_were/vob/001 -F 1,'-B 251 -S 796 ' --export_asr 2 -b 224 -s 1.138 --a52_drc_off -V -f 24,1 -g 720x480 -M 2 -j 0,32,0,32 -Y -20,0,-20,0 -B 35,38,8 -y mpeg2enc,mp2enc -E 44100 --psu_mode --nav_seek /tmp/we_were/tmp/we_were-001-nav.log --no_split -o /tmp/we_were/avi/001/we_were-001 --print_status 20 && echo DVDRIP_SUCCESS
Thu Mar 13 08:49:01 2003 Job has PID 5973
Thu Mar 13 08:49:21 2003 Aborting command. Sending signal 1 to PID 5973...
**************************************************
Thu Mar 13 08:49:21 2003 Aborting job: Transcoding video - title #1, single pass
**************************************************
Thu Mar 13 08:50:14 2003 This task needs about 2812 MB, 11502 MB are free.
Thu Mar 13 08:50:14 2003 Starting job (1): Transcoding video - title #1, single pass
Thu Mar 13 08:50:14 2003 Executing command: dr_exec transcode -a 0 -x vob -i /tmp/we_were/vob/001 -F 1,'-B 251 -S 796 ' --export_asr 2 -b 224 -s 1.138 --a52_drc_off -V -f 24,1 -g 720x480 -M 2 -j 0,32,0,32 -Y -20,0,-20,0 -B 35,38,8 -y mpeg2enc,mp2enc -E 44100 --psu_mode --nav_seek /tmp/we_were/tmp/we_were-001-nav.log --no_split -o /tmp/we_were/avi/001/we_were-001 --print_status 20 && echo DVDRIP_SUCCESS
Thu Mar 13 08:50:14 2003 Job has PID 6010
Thu Mar 13 08:51:13 2003 Transcoding video - title #1, single pass: 10% done.
Thu Mar 13 08:52:07 2003 Transcoding video - title #1, single pass: 20% done.
Thu Mar 13 08:53:02 2003 Transcoding video - title #1, single pass: 30% done.
Thu Mar 13 08:53:59 2003 Transcoding video - title #1, single pass: 40% done.
Thu Mar 13 08:54:55 2003 Transcoding video - title #1, single pass: 50% done.
Thu Mar 13 08:55:46 2003 Transcoding video - title #1, single pass: 60% done.
Thu Mar 13 08:56:41 2003 Transcoding video - title #1, single pass: 70% done.
Thu Mar 13 08:57:35 2003 Transcoding video - title #1, single pass: 80% done.
Thu Mar 13 08:58:29 2003 Transcoding video - title #1, single pass: 90% done.
Thu Mar 13 08:59:18 2003 Transcoding video - title #1, single pass: 110% done.
Thu Mar 13 09:15:45 2003 Transcoding video - title #1, single pass: 130% done.
Thu Mar 13 10:59:19 2003 Transcoding video - title #1, single pass: 150% done.
Thu Mar 13 11:52:29 2003 Successfully finished job (1): Transcoding video - title #1, single pass
Thu Mar 13 11:52:31 2003 Starting job (2): Multiplexing MPEG - title #1
|
As you can see where I inserted the asterisks, it is aborting and then restarting the job. Does anyone know why?
If I let it run long enough, it eventually finishes, but I don't want to be wasting time if it isn't supposed to be doing this.
Thanks for any suggestions you can offer. |
|
| Back to top |
|
 |
Beekster
Apprentice
Joined: 26 Nov 2002
Posts: 268
Location: Sydney
|
| Posted: Fri Mar 14, 2003 7:43 am Post subject: |
|
|
I have seen this behaviour as well, and I assume that the progress tracking is only displaying the progress within each chapter of the selected DVD "track".
I suppose it is a bug of sorts, but I have come to see it as normal behaviour... 
Hope this helps. |
|
| Back to top |
|
|
red_over_blue
Guru
Joined: 16 Dec 2002
Posts: 310
|
| Posted: Fri Mar 14, 2003 9:58 pm Post subject: |
|
|
Ok, that takes care of that, but there is something else.
If I encode to VCD, I don't seem to get any errors. However, if I choose SVCD as my codec (to improve quality), the transode goes fine, but then when it tries to multiplex with mplex, I get the following:
| Quote: |
++ WARN: [mplex] Video e0: buf= 17149 frame=049435 sector=00235258
++ WARN: [mplex] Audio c0: buf= 2105 frame=078931 sector=00025145
++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=188898355 required(DTS)=188898069
++ WARN: [mplex] Video e0: buf= 9825 frame=050320 sector=00239561
++ WARN: [mplex] Audio c0: buf= 2413 frame=080344 sector=00025595
++ WARN: [mplex] Stream e0: data will arrive too late sent(SCR)=232114674 required(DTS)=232114242
++ WARN: [mplex] Video e0: buf= 10657 frame=061832 sector=00294347
++ WARN: [mplex] Audio c0: buf= 2157 frame=098726 sector=00031451
**ERROR: [mplex] Too many frame drops -exiting
|
I did some searching for mplex frame drops, but came up emtpy handed. I also tried emerging the latest unstable mplex, but this didn't help either. I don't know for sure if it is mplex having the problem, or if it is working fine and there was an error before that is only being caught now.
LOL - All I want to do is burn a DVD to a descent quality VCD or SVCD, and I can't seem to get anything to work!!! |
|
| Back to top |
|
|
jetblack
Guru
Joined: 15 Jan 2003
Posts: 340
Location: Evanston, IL, USA
|
| Posted: Fri Mar 14, 2003 10:04 pm Post subject: |
|
|
Perhaps you could give myvcd a try. I never got around to trying it, but perhaps it will work better for you than dvd::rip.
It does rely on mplayer, so if you don't have that installed, it might not help. |
|
| Back to top |
|
|
red_over_blue
Guru
Joined: 16 Dec 2002
Posts: 310
|
| Posted: Fri Mar 14, 2003 11:01 pm Post subject: |
|
|
I'll give that a shot.
I'm guessing is uses mencoder rather than transcode? Anyway... thanks for the suggestion. I really like dvd::rip and its interface, but so far it simply has not worked fawlessly. |
|
| Back to top |
|
|
jetblack
Guru
Joined: 15 Jan 2003
Posts: 340
Location: Evanston, IL, USA
|
| Posted: Fri Mar 14, 2003 11:26 pm Post subject: |
|
|
| Yes, I believe it uses MEncoder. I always had more success ripping to divx with MEncoder than dvd::rip. I hope it helps you. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Multimedia
