Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
SGI-O2 LED blinking red
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
tabacco
n00b
n00b


Joined: 29 Nov 2005
Posts: 4

PostPosted: Tue Nov 29, 2005 3:59 am    Post subject: SGI-O2 LED blinking red Reply with quote

Hi there,

I just completed a Gentoo install on an O2 R5000 machine, pretty much following the handbook, since this is my first SGI box and I don't have a lot of experience with them. Right now, I'm having problems with arcboot (I think), where after reading the kernel the machine halts with the front LED flashing red. Here's the transcript:

arcsboot: ARCS Linux ext2fs loader 0.3.8.4


Loading linux from scsi(0)disk(1)rdisk(0)partition(0)

Header says 32-bit
Allocated 0x80 bytes for segments

Loading 32-bit executable
Loading program segment 1 at 0x80004000, offset 0x800, size = 0x2899e8
0x288800
Loading program segment 2 at 0x80290000, offset 0x28c000, size = 0x6a086
0x69000
Zeroing memory at 0x802fa086, size = 0x2
Loading program segment 3 at 0x802fc000, offset=0x2f6000, size = 0x0

Zeroing memory at 0x802fc000, size = 0x2b020
Starting 32-bit kernel

-->> [Freeze and LED blink] <<--


Does anyone have any ideas?
Back to top
View user's profile Send private message
johnathonschade
n00b
n00b


Joined: 30 Apr 2004
Posts: 7
Location: USA

PostPosted: Wed Nov 30, 2005 6:10 am    Post subject: SGI-O2 LED blinking red Reply with quote

well, without more info I don't know for sure what the cause is...
but I had a similar problem (and a similar error) on my first O2 install.. my problem was on a 2.6 kernel I typed the standard:
Code:
make && make modules_install

only to find out I should have used
Code:
make vmlinux.32 && make modules_install

due to the use of a 64 bit kernel...
my thanks go to geoman for pointing that out to me
I hope this helps you in some small way...

:)
_________________
SGI O2 r5k-200Mhz 128MB | Sun X2200 Dual-core Opteron-2.6Ghz 2GB | Pentium 4-1.7Ghz 256MB
Back to top
View user's profile Send private message
tabacco
n00b
n00b


Joined: 29 Nov 2005
Posts: 4

PostPosted: Wed Nov 30, 2005 1:37 pm    Post subject: Reply with quote

It's certainly worth a try. Thanks!
Back to top
View user's profile Send private message
tabacco
n00b
n00b


Joined: 29 Nov 2005
Posts: 4

PostPosted: Sat Dec 03, 2005 7:00 am    Post subject: Reply with quote

Doh... Swapped the existing vmlinux out for the newly built vmlinux.32, and no luck... same thing :(
Back to top
View user's profile Send private message
Redhatter
Retired Dev
Retired Dev


Joined: 20 Sep 2003
Posts: 548
Location: Brisbane, QLD, Australia

PostPosted: Sat Dec 03, 2005 12:19 pm    Post subject: Reply with quote

Where did you get your .config from? By the sounds of things, it's a duff kernel that's making the machine b0rk.

I'd recommend using the /proc/config.gz from the netboot image -- just remember to disable initramfs/embedded ramdisks before you make vmlinux.
_________________
Stuart Longland (a.k.a Redhatter, VK4MSL)
I haven't lost my mind - it's backed up on a tape somewhere...

Gentoo/MIPS Cobalt developer, Mozilla herd member.
Back to top
View user's profile Send private message
tabacco
n00b
n00b


Joined: 29 Nov 2005
Posts: 4

PostPosted: Mon Dec 05, 2005 7:32 am    Post subject: Reply with quote

Success! Thanks :)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum