Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[HARDWARE/DMA]Wyłączenie DMA
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt
View previous topic :: View next topic  
Author Message
Poe
Bodhisattva
Bodhisattva


Joined: 03 Apr 2004
Posts: 2155
Location: Mysłowice/Lublin, Poland

PostPosted: Fri Nov 18, 2005 6:20 pm    Post subject: [HARDWARE/DMA]Wyłączenie DMA Reply with quote

Mam dwa dyski.. moj WD40gb jako PMaster i Segate 120gb ATA (znajomego) jako PSlave (oba bez zworek, bo nie mam, ale na odpowiedniej tasmie, dobrze podpiete, zawsze dzialalo). I problem jest taki, ze nagle, pewnego pieknego dnia, jak odpalalem gentoo zaczelo mi wypluwac jakies bledy zwiazane z tym dyskiem segate (hdb)
Code:

PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
hda: WDC WD400AB-00CBA1, ATA DISK drive
hdb: ST3120022A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb: max request size: 1024KiB
hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
 hdb:hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: DMA disabled
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
 unable to read partition table
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[...potem juz przy starcie, tuz po sprawdzeniu hda wyskakuje mi rameczka, ze dma jest zdiseablowane przez co dysk moze wolniej dzialac.. jakos tak]

a, jeszcze zanim wyskoczy mi ta ramka o niedostepnym dma wywala, ze nie moze zamontowac tych partycji z hdb (mam je w fstabie)
Code:

[...]
/dev/hdb5               /mnt/badur1     ntfs            iocharset=iso8859-2,rw,users,umask=000                  0 0
/dev/hdb6               /mnt/badur2     ntfs            iocharset=iso8859-2,rw,users,umask=000                  0 0
/dev/hdb7               /mnt/badur3     ntfs            iocharset=iso8859-2,rw,users,umask=000                  0 0

zawsze mi dzialalo tak. nie wiem co sie pokrzanilo.... generalnie pod windowsem widzi ten dysk i czyta z niego dane, ale tu sie cos kopnęło.. jak go odepnę, to wszystko dziala normalnie... problem jest ewidentnie z tym dyskiem.. mam nadzieje ze to cos jest nakopane przeze mnie w Gentoo, a nie skrzanilo sie w dysku, bo bde mial przechlapane...

pozdrawiam
_________________
Hardware:HP Pavilion DV6875SE[C2DT5550@1.83GHz_3GB-DDR2_320GB-SATA_GF8400GS]
http://popularcoffee.blogspot.com - Popkulturowa Kawa
RLU#342333
Back to top
View user's profile Send private message
Raku
Bodhisattva
Bodhisattva


Joined: 28 Feb 2004
Posts: 2374
Location: Poland

PostPosted: Sat Nov 19, 2005 11:10 am    Post subject: Reply with quote

mi tak sypało w logach jak była taśma walnięta
_________________
raku

Powered by Archlinux ;-)
Back to top
View user's profile Send private message
Xax
Guru
Guru


Joined: 24 Jul 2003
Posts: 417
Location: Poland, Gliwice, Trynek

PostPosted: Sun Nov 20, 2005 8:58 pm    Post subject: Reply with quote

A ja mialem takie cudenka jak moj maxtor w pracy wyzional ducha. Juz mam nowy dysk, maxtor jest trup :)

[EDIT]
Jezeli nie zmieniales nic w Gentoo, a uscislajac w kernelu i nagle, z dnia na dzien takie kwiatuszki to nie zwalal bym tego na Gentoo a raczj na dysk. Sproboj raczej tylko ten dysk wlozyc i wlaczyc w ustawieniach biosu aby sie wywalal w czasie startu na wszystkich bledach. U mnie przy takich ustawieniach wyzej wymieniony maxtor blokowal start kompa.
Back to top
View user's profile Send private message
Polin
Guru
Guru


Joined: 09 Oct 2004
Posts: 318

PostPosted: Sun Nov 20, 2005 10:28 pm    Post subject: Reply with quote

Mialem bardzo podobne bledy, jak sie okazalo - dysk powoli zdychal, co potwierdzilo smartmontools.
Back to top
View user's profile Send private message
Poe
Bodhisattva
Bodhisattva


Joined: 03 Apr 2004
Posts: 2155
Location: Mysłowice/Lublin, Poland

PostPosted: Mon Nov 21, 2005 6:26 pm    Post subject: Reply with quote

khm... to zescie mnie pocieszyli.. czemu ten dysk akkurat musi padac w moich rekach.... brrr.. oby to byla jednak tasma, jak raku sugeruje... oby..
_________________
Hardware:HP Pavilion DV6875SE[C2DT5550@1.83GHz_3GB-DDR2_320GB-SATA_GF8400GS]
http://popularcoffee.blogspot.com - Popkulturowa Kawa
RLU#342333
Back to top
View user's profile Send private message
Xax
Guru
Guru


Joined: 24 Jul 2003
Posts: 417
Location: Poland, Gliwice, Trynek

PostPosted: Mon Nov 21, 2005 9:56 pm    Post subject: Reply with quote

Poe wrote:
khm... to zescie mnie pocieszyli.. czemu ten dysk akkurat musi padac w moich rekach.... brrr.. oby to byla jednak tasma, jak raku sugeruje... oby..


No w sumie taka nasza rola - pomagac, a jak sie nie da pomoc to chociaz pocieszyc (albo opierniczyc z gory na dol za nieumiejetne wyrazanie mysli w formie pisemnej :lol: )

PS To na bank tasma :?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum