| View previous topic :: View next topic |
| Author |
Message |
weedy
Apprentice
Joined: 24 Jun 2005
Posts: 247
|
 Posted: Sat Nov 12, 2005 6:16 am Post subject: [Problem] lirc fails to compile dirver during emerge |
 |
|
Every time i emerge lirc i get this:
| Code: | KBUILD_VERBOSE=1
make[4]: Entering directory `/usr/src/linux-2.6.14-gentoo-r1'
mkdir -p /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/.tmp_versions
make -f scripts/Makefile.build obj=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb
gcc -m32 -Wp,-MD,/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/.lirc_atiusb.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/3.4.4/i
nclude -D__KERNEL__ -Iinclude -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -
pipe -msoft-float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=i686 -mtune=pentium3 -mregparm=3 -Iinclude/asm-i386/mach-default -Wdeclaration-after
-statement -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/../.. -I /
lib/modules/2.6.14-gentoo-r1/build//include/ -DMODULE -DKBUILD_BASENAME=lirc_atiusb -DKBUILD_MODNAME=lirc_atiusb -c -o /var/tmp/portage/lirc-0.7.2/work/lirc-
0.7.2/drivers/lirc_atiusb/.tmp_lirc_atiusb.o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function `send_packet':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:276: error: `URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:276: error: (Each undeclared identifier is reported only once
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:276: error: for each function it appears in.)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function `set_use_dec':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:357: error: `URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function `usb_remote_recv':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:612: error: `URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function `usb_remote_send':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:675: error: `URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function `free_in_endpt':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:723: error: `URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function `free_out_endpt':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:817: error: `URB_ASYNC_UNLINK' undeclared (first use in this function)
make[5]: *** [/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.o] Error 1
make[4]: *** [_module_/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb] Error 2
make[4]: Leaving directory `/usr/src/linux-2.6.14-gentoo-r1'
make[3]: *** [lirc_atiusb.o] Error 2
make[3]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2'
make: *** [all] Error 2
!!! ERROR: app-misc/lirc-0.7.2 failed.
!!! Function src_compile, Line 112, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.
|
help would be good 
Last edited by weedy on Tue Nov 15, 2005 5:49 am; edited 1 time in total |
|
| Back to top |
|
 |
weedy
Apprentice
Joined: 24 Jun 2005
Posts: 247
|
| Posted: Mon Nov 14, 2005 8:55 pm Post subject: |
|
|
| bump |
|
| Back to top |
|
|
weedy
Apprentice
Joined: 24 Jun 2005
Posts: 247
|
| Posted: Tue Nov 15, 2005 1:07 am Post subject: |
|
|
upgraded to 14-r2
| Code: | make -C /lib/modules/2.6.14-gentoo-r1/build/ SUBDIRS=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb modules \
KBUILD_VERBOSE=1
make[4]: Entering directory `/usr/src/linux-2.6.14-gentoo-r1'
mkdir -p /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/.tmp_versions
make -f scripts/Makefile.build obj=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb
gcc -m32 -Wp,-MD,/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/.lirc_atiusb.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/4.0.2/i
nclude -D__KERNEL__ -Iinclude -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -
pipe -msoft-float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=i686 -mtune=pentium3 -mregparm=3 -Iinclude/asm-i386/mach-default -Wdeclaration-after
-statement -Wno-pointer-sign -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_
atiusb/../.. -I /lib/modules/2.6.14-gentoo-r1/build//include/ -DMODULE -DKBUILD_BASENAME=lirc_atiusb -DKBUILD_MODNAME=lirc_atiusb -c -o /var/tmp/portage/lirc
-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/.tmp_lirc_atiusb.o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function 'send_packet':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:276: error: 'URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:276: error: (Each undeclared identifier is reported only once
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:276: error: for each function it appears in.)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function 'set_use_dec':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:357: error: 'URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function 'usb_remote_recv':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:612: error: 'URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function 'usb_remote_send':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:675: error: 'URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function 'free_in_endpt':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:723: error: 'URB_ASYNC_UNLINK' undeclared (first use in this function)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c: In function 'free_out_endpt':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.c:817: error: 'URB_ASYNC_UNLINK' undeclared (first use in this function)
make[5]: *** [/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb/lirc_atiusb.o] Error 1
make[4]: *** [_module_/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb] Error 2
make[4]: Leaving directory `/usr/src/linux-2.6.14-gentoo-r1'
make[3]: *** [lirc_atiusb.o] Error 2
make[3]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_atiusb'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2'
make: *** [all] Error 2
!!! ERROR: app-misc/lirc-0.7.2 failed.
!!! Function src_compile, Line 112, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.
|
|
|
| Back to top |
|
|
ChojinDSL
l33t
Joined: 07 Jul 2003
Posts: 784
|
| Posted: Tue Nov 15, 2005 8:08 pm Post subject: |
|
|
I'm having a similar problem. I think the current version doesnt work properly with gentoo-sources kernel 2.6.14.
In some other thread I've read that downgrading the kernel version to 2.6.13 should fix things.
About to try that myself.
As the saying goes, "if it aint broke, dont fix it."
****UPDATE****
Ok, I downgraded to gentoo-sources 2.6.13-r5 and the compile finished cleanly.
***UPDATE****
I finished rebooting with the new kernel. As suspected, lirc works perfectly again. |
|
| Back to top |
|
|
mcguire
n00b
Joined: 29 Nov 2004
Posts: 19
Location: France
|
| Posted: Wed Nov 16, 2005 12:58 am Post subject: |
|
|
same problem here since I've upgraded my kernel:
cat /proc/version
| Code: | | Linux version 2.6.14-gentoo-r2 (root@xblade) (version gcc 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #3 PREEMPT Sun Nov 13 12:59:50 CET 2005 |
emerge lirc
| Code: | Calculating dependencies ...done!
>>> emerge (1 of 1) app-misc/lirc-0.7.2 to /
>>> md5 files ;-) lirc-0.7.2.ebuild
>>> md5 files ;-) lirc-0.7.0-r1.ebuild
>>> md5 files ;-) lirc-0.7.1.ebuild
>>> md5 files ;-) files/digest-lirc-0.7.0-r1
>>> md5 files ;-) files/lirc-0.7.0_pre2-i2c.patch.gz
>>> md5 files ;-) files/lircd
>>> md5 files ;-) files/lircd.conf
>>> md5 files ;-) files/digest-lirc-0.7.1
>>> md5 files ;-) files/digest-lirc-0.7.2
>>> md5 files ;-) files/lirc-0.7.0-streamzap.patch.bz2
>>> md5 files ;-) files/lircmd
>>> md5 files ;-) files/lirc-0.6.6-gentoo.diff.bz2
>>> md5 files ;-) files/lirc-0.7.0_pre7-configure.patch
>>> md5 files ;-) files/lirc-0.7.0-xbox.patch.bz2
>>> md5 files ;-) files/lirc-0.7.0_pre7-streamzap.patch.bz2
>>> md5 files ;-) files/xbox-lircd.conf
>>> md5 files ;-) files/lirc-0.7.0-configure.in.patch
>>> md5 src_uri ;-) lirc-0.7.2.tar.bz2
[32;01m*[0m Determining the location of the kernel source code
[32;01m*[0m Found kernel source directory:
[32;01m*[0m /usr/src/linux
[32;01m*[0m Found sources for kernel version:
[32;01m*[0m 2.6.14-gentoo-r2
>>> Unpacking source...
>>> Unpacking lirc-0.7.2.tar.bz2 to /var/tmp/portage/lirc-0.7.2/work
>>> Source unpacked.
You should update your `aclocal.m4' by running aclocal.
* econf: updating lirc-0.7.2/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating lirc-0.7.2/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-manage-devices --localstatedir=/var --with-syslog=LOG_DAEMON --enable-sandboxed --disable-debug --with-X --with-driver=hauppauge --build=i686-pc-linux-gnu
creating cache ./config.cache
checking for a BSD compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
checking for gcc... gcc
checking whether the C compiler (gcc -O2 -march=athlon-xp -pipe -Wall ) works... yes
checking whether the C compiler (gcc -O2 -march=athlon-xp -pipe -Wall ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for a BSD compatible install... /bin/install -c
checking whether make sets ${MAKE}... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... /usr/bin/libusb-config
checking whether ln -s works... yes
checking for Cygwin environment... no
checking for mingw32 environment... no
checking how to run the C preprocessor... gcc -E
checking host system type... i686-pc-linux-gnu
checking build system type... i686-pc-linux-gnu
checking for ld used by GCC... /usr/i686-pc-linux-gnu/bin/ld
checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking for a sed that does not truncate output... /bin/sed
checking how to recognise dependent libraries... pass_all
checking for object suffix... o
checking for executable suffix... no
checking command to parse /usr/bin/nm -B output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.lo... yes
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking whether the linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether -lc should be explicitly linked in... no
creating libtool
checking for ANSI C header files... yes
checking whether time.h and sys/time.h may both be included... yes
checking for fcntl.h... yes
checking for limits.h... yes
checking for sys/ioctl.h... yes
checking for sys/time.h... yes
checking for syslog.h... yes
checking for unistd.h... yes
checking for working const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking for vga.h... no
checking for X... libraries , headers
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /lib/modules/2.6.14-gentoo-r2/build/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking for portaudio.h... no
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking for ALSA SB RC hwdep support... yes
checking for scsi/sg.h... yes
checking for linux/input.h... yes
checking for sys/soundcard.h... yes
updating cache ./config.cache
creating ./config.status
creating Makefile
creating drivers/Makefile
creating drivers/lirc_atiusb/Makefile
creating drivers/lirc_bt829/Makefile
creating drivers/lirc_cmdir/Makefile
creating drivers/lirc_dev/Makefile
creating drivers/lirc_gpio/Makefile
creating drivers/lirc_i2c/Makefile
creating drivers/lirc_igorplugusb/Makefile
creating drivers/lirc_imon/Makefile
creating drivers/lirc_it87/Makefile
creating drivers/lirc_mceusb/Makefile
creating drivers/lirc_mceusb2/Makefile
creating drivers/lirc_parallel/Makefile
creating drivers/lirc_sasem/Makefile
creating drivers/lirc_serial/Makefile
creating drivers/lirc_sir/Makefile
creating drivers/lirc_streamzap/Makefile
creating daemons/Makefile
creating tools/Makefile
creating doc/Makefile
creating doc/man/Makefile
creating config.h
You will have to use the lirc_i2c kernel module.
Now enter 'make' and 'make install' to compile and install the package.
[32;01m*[0m Converting lirc-0.7.2/Makefile to use M= instead of SUBDIRS= ...
[A[132C [34;01m[ [32;01mok[34;01m ][0m
cd . && /bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run aclocal
cd . && \
/bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run automake --gnu Makefile
cd . && /bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run autoconf
configure.in:18: warning: do not use m4_patsubst: use patsubst or m4_bpatsubst
aclocal.m4:629: AM_CONFIG_HEADER is expanded from...
configure.in:18: the top level
configure.in:1316: warning: do not use m4_regexp: use regexp or m4_bregexp
aclocal.m4:642: _AM_DIRNAME is expanded from...
configure.in:1316: the top level
/bin/sh ./config.status --recheck
running /bin/sh ./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-manage-devices --localstatedir=/var --with-syslog=LOG_DAEMON --enable-sandboxed --disable-debug --with-X --with-driver=hauppauge --build=i686-pc-linux-gnu --no-create --no-recursion
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for i686-pc-linux-gnu-gcc... i686-pc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether i686-pc-linux-gnu-gcc accepts -g... yes
checking for i686-pc-linux-gnu-gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of i686-pc-linux-gnu-gcc... gcc3
checking for a BSD-compatible install... /bin/install -c
checking whether make sets $(MAKE)... (cached) yes
checking for mknod... /bin/mknod
checking for mkfifo... /bin/mkfifo
checking for depmod... /sbin/depmod
checking for libusb-config... /usr/bin/libusb-config
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by i686-pc-linux-gnu-gcc... /usr/i686-pc-linux-gnu/bin/ld
checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/i686-pc-linux-gnu-nm -B
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... i686-pc-linux-gnu-gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for i686-pc-linux-gnu-g++... i686-pc-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether i686-pc-linux-gnu-g++ accepts -g... yes
checking dependency style of i686-pc-linux-gnu-g++... gcc3
checking how to run the C++ preprocessor... i686-pc-linux-gnu-g++ -E
checking for i686-pc-linux-gnu-g77... i686-pc-linux-gnu-g77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether i686-pc-linux-gnu-g77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/i686-pc-linux-gnu-nm -B output from i686-pc-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for i686-pc-linux-gnu-ar... i686-pc-linux-gnu-ar
checking for i686-pc-linux-gnu-ranlib... i686-pc-linux-gnu-ranlib
checking for i686-pc-linux-gnu-strip... i686-pc-linux-gnu-strip
checking for correct ltmain.sh version... yes
checking if i686-pc-linux-gnu-gcc static flag works... yes
checking if i686-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for i686-pc-linux-gnu-gcc option to produce PIC... -fPIC
checking if i686-pc-linux-gnu-gcc PIC flag -fPIC works... yes
checking if i686-pc-linux-gnu-gcc supports -c -o file.o... yes
checking whether the i686-pc-linux-gnu-gcc linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by i686-pc-linux-gnu-g++... /usr/i686-pc-linux-gnu/bin/ld
checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld... yes
checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking for i686-pc-linux-gnu-g++ option to produce PIC... -fPIC
checking if i686-pc-linux-gnu-g++ PIC flag -fPIC works... yes
checking if i686-pc-linux-gnu-g++ supports -c -o file.o... yes
checking whether the i686-pc-linux-gnu-g++ linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for i686-pc-linux-gnu-g77 option to produce PIC... -fPIC
checking if i686-pc-linux-gnu-g77 PIC flag -fPIC works... yes
checking if i686-pc-linux-gnu-g77 supports -c -o file.o... yes
checking whether the i686-pc-linux-gnu-g77 linker (/usr/i686-pc-linux-gnu/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for unistd.h... (cached) yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for off_t... yes
checking for pid_t... yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for gethostname... yes
checking for gettimeofday... yes
checking for mkfifo... yes
checking for select... yes
checking for socket... yes
checking for strdup... yes
checking for strerror... yes
checking for strtoul... yes
checking for snprintf... yes
checking for strsep... yes
checking for vsyslog... yes
checking for daemon... yes
checking for forkpty... no
checking for forkpty in -lutil... yes
checking vga.h usability... no
checking vga.h presence... no
checking for vga.h... no
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for getopt_long... yes
checking for mktemp... yes
checking for Linux kernel sources... /lib/modules/2.6.14-gentoo-r2/build/
checking for which drivers can be installed on this system...
checking for caraca_init in -lcaraca_client... no
checking for ir_strerror in -lirman... no
checking for ir_strerror in -lirman_sw... no
checking portaudio.h usability... no
checking portaudio.h presence... no
checking for portaudio.h... no
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking for ALSA SB RC hwdep support... yes
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking linux/input.h usability... yes
checking linux/input.h presence... yes
checking for linux/input.h... yes
checking sys/soundcard.h usability... yes
checking sys/soundcard.h presence... yes
checking for sys/soundcard.h... yes
configure: creating ./config.status
You will have to use the lirc_i2c kernel module.
Now enter 'make' and 'make install' to compile and install the package.
cd . && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=Makefile /bin/sh ./config.status
config.status: creating Makefile
config.status: executing default-1 commands
cd . && /bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run autoheader
autoheader-2.59: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader-2.59: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader-2.59: WARNING: is deprecated and discouraged.
autoheader-2.59:
autoheader-2.59: WARNING: Using the third argument of `AC_DEFINE' and
autoheader-2.59: WARNING: `AC_DEFINE_UNQUOTED' allows to define a template without
autoheader-2.59: WARNING: `acconfig.h':
autoheader-2.59:
autoheader-2.59: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader-2.59: [Define if a function `main' is needed.])
autoheader-2.59:
autoheader-2.59: WARNING: More sophisticated templates can also be produced, see the
autoheader-2.59: WARNING: documentation.
configure.in:18: warning: do not use m4_patsubst: use patsubst or m4_bpatsubst
aclocal.m4:629: AM_CONFIG_HEADER is expanded from...
configure.in:18: the top level
configure.in:1316: warning: do not use m4_regexp: use regexp or m4_bregexp
aclocal.m4:642: _AM_DIRNAME is expanded from...
configure.in:1316: the top level
cd . \
&& CONFIG_FILES= CONFIG_HEADERS=config.h \
/bin/sh ./config.status
config.status: creating config.h
config.status: executing default-1 commands
make all-recursive
make[1]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2'
Making all in drivers
make[2]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers'
cd .. && \
/bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run automake --gnu drivers/Makefile
cd .. && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=drivers/Makefile /bin/sh ./config.status
config.status: creating drivers/Makefile
config.status: executing default-1 commands
make[2]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers'
make[2]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers'
Making all in lirc_dev
make[3]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev'
cd ../.. && \
/bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run automake --gnu drivers/lirc_dev/Makefile
cd ../.. && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=drivers/lirc_dev/Makefile /bin/sh ./config.status
config.status: creating drivers/lirc_dev/Makefile
config.status: executing default-1 commands
make[3]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev'
make[3]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev'
mv Makefile Makefile.automake
cp ../Makefile.kernel Makefile
make -C /lib/modules/2.6.14-gentoo-r2/build/ SUBDIRS=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev modules \
KBUILD_VERBOSE=1
make[4]: Entering directory `/usr/src/linux-2.6.14-gentoo-r2'
mkdir -p /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/.tmp_versions
make -f scripts/Makefile.build obj=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev
gcc -m32 -Wp,-MD,/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/.lirc_dev.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/3.4.4/include -D__KERNEL__ -Iinclude -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/../.. -I /lib/modules/2.6.14-gentoo-r2/build//include/ -DMODULE -DKBUILD_BASENAME=lirc_dev -DKBUILD_MODNAME=lirc_dev -c -o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.c
Building modules, stage 2.
make -rR -f /usr/src/linux-2.6.14-gentoo-r2/scripts/Makefile.modpost
scripts/mod/modpost -i /usr/src/linux-2.6.14-gentoo-r2/Module.symvers vmlinux /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.o
gcc -m32 -Wp,-MD,/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/.lirc_dev.mod.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/3.4.4/include -D__KERNEL__ -Iinclude -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -DKBUILD_BASENAME=lirc_dev -DKBUILD_MODNAME=lirc_dev -DMODULE -c -o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.mod.o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.mod.c
ld -m elf_i386 -m elf_i386 -r -o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.ko /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev/lirc_dev.mod.o
make[4]: Leaving directory `/usr/src/linux-2.6.14-gentoo-r2'
mv Makefile.automake Makefile
make[3]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_dev'
Making all in lirc_i2c
make[3]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c'
cd ../.. && \
/bin/sh /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/missing --run automake --gnu drivers/lirc_i2c/Makefile
cd ../.. && \
CONFIG_HEADERS= CONFIG_LINKS= \
CONFIG_FILES=drivers/lirc_i2c/Makefile /bin/sh ./config.status
config.status: creating drivers/lirc_i2c/Makefile
config.status: executing default-1 commands
make[3]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c'
make[3]: Entering directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c'
mv Makefile Makefile.automake
cp ../Makefile.kernel Makefile
make -C /lib/modules/2.6.14-gentoo-r2/build/ SUBDIRS=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c modules \
KBUILD_VERBOSE=1
make[4]: Entering directory `/usr/src/linux-2.6.14-gentoo-r2'
mkdir -p /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/.tmp_versions
make -f scripts/Makefile.build obj=/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c
gcc -m32 -Wp,-MD,/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/.lirc_i2c.o.d -nostdinc -isystem /usr/lib/gcc/i686-pc-linux-gnu/3.4.4/include -D__KERNEL__ -Iinclude -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -ffreestanding -O2 -fomit-frame-pointer -pipe -msoft-float -mpreferred-stack-boundary=2 -fno-unit-at-a-time -march=athlon -Iinclude/asm-i386/mach-default -Wdeclaration-after-statement -DIRCTL_DEV_MAJOR=61 -DEXPORT_SYMTAB -DHAVE_CONFIG_H -I. -I. -I../.. -I /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../.. -I /lib/modules/2.6.14-gentoo-r2/build//include/ -DMODULE -DKBUILD_BASENAME=lirc_i2c -DKBUILD_MODNAME=lirc_i2c -c -o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.o /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c
In file included from include/linux/rcuref.h:36,
from include/linux/fs.h:12,
from /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/lirc_dev/lirc_dev.h:24,
from /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:58:
include/linux/interrupt.h:30: erreur: types conflictuels pour « irqreturn_t »
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/kcompat.h:166: erreur: déclaration précédente de « irqreturn_t » était ici
Dans le fichier inclus à partir de include/linux/rcuref.h:36,
à partir de include/linux/fs.h:12,
à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/lirc_dev/lirc_dev.h:24,
à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:58:
include/linux/interrupt.h:32:1: attention : "IRQ_NONE" redefined
Dans le fichier inclus à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:57:
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/kcompat.h:167:1: attention : this is the location of the previous definition
Dans le fichier inclus à partir de include/linux/rcuref.h:36,
à partir de include/linux/fs.h:12,
à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/lirc_dev/lirc_dev.h:24,
à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:58:
include/linux/interrupt.h:33:1: attention : "IRQ_HANDLED" redefined
Dans le fichier inclus à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:57:
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/kcompat.h:168:1: attention : this is the location of the previous definition
Dans le fichier inclus à partir de include/linux/rcuref.h:36,
à partir de include/linux/fs.h:12,
à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/lirc_dev/lirc_dev.h:24,
à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:58:
include/linux/interrupt.h:34:1: attention : "IRQ_RETVAL" redefined
Dans le fichier inclus à partir de /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:57:
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/../../drivers/kcompat.h:169:1: attention : this is the location of the previous definition
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c: In function `ir_attach':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:426: erreur: « I2C_ALGO_BIT » non déclaré (première utilisation dans cette fonction)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:426: erreur: (Chaque identificateur non déclaré est rapporté une seule fois
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:426: erreur: pour chaque fonction dans laquelle il apparaît.)
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c: In function `ir_probe':
/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c:506: erreur: « I2C_ALGO_BIT » non déclaré (première utilisation dans cette fonction)
make[5]: *** [/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.o] Erreur 1
make[4]: *** [_module_/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c] Erreur 2
make[4]: Leaving directory `/usr/src/linux-2.6.14-gentoo-r2'
make[3]: *** [lirc_i2c.o] Erreur 2
make[3]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c'
make[2]: *** [all-recursive] Erreur 1
make[2]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers'
make[1]: *** [all-recursive] Erreur 1
make[1]: Leaving directory `/var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2'
make: *** [all] Erreur 2
!!! ERROR: app-misc/lirc-0.7.2 failed.
!!! Function src_compile, Line 112, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message. |
/etc/make.conf
| Code: | CFLAGS="-O2 -march=athlon-xp -pipe"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
USE="-3dfx 3dnow 3dnowext X a52 aac -acpi aim alsa apache2 apm arts avi bash-completion browserplugin cdr -cups dts dv dvd flash ftp fuse gd -gnome gpm gtk gtk2 java javascript jpeg2k kde kdeenablefinal lirc matroska mime ming mmx mozcalendar mozdevelop mp3 mpeg msn mysql nls nsplugin nvidia ogg opengl pdflib php qt quicktime real samba sse unicode usb userlocales utf8 v4l vcd vorbis win32codecs -xmms xosd xscreensaver xvid yahoo zlib"
LINGUAS="fr en"
#FEATURES="distcc"
ACCEPT_KEYWORDS="~x86"
ALSA_CARDS="usb-audio"
LIRC_OPTS="--with-driver=hauppauge" |
|
|
| Back to top |
|
|
slopedsideways
n00b
Joined: 20 Nov 2005
Posts: 1
Location: North Dakota
|
| Posted: Sun Nov 20, 2005 6:05 pm Post subject: |
|
|
I am having the same problem trying to emerge lirc.
I'm in the process of downloading the 2.6.13-r5 kernel, hopefully that does work.
But I was wondering if anyone knew of a way around this with the 2.6.14 kernel.
Thanks |
|
| Back to top |
|
|
je_fro
Retired Dev
Joined: 14 Dec 2002
Posts: 236
Location: Republic of Texas
|
| Posted: Thu Nov 24, 2005 4:57 am Post subject: yeah... |
|
|
Emerge lirc. Right after it unpacks the source hit control-Z.
Edit (or patch) /var/tmp/portage/lirc.../work/...i2c_lirc/i2c_lirc.c
with this: http://sourceforge.net/mailarchive/forum.php?thread_id=8621016&forum_id=5339
then hit "fg" and the compile will resume and finish.
Worked for me with 2.6.14-gentoo-r2
After patching, the file will look like this (around line 57)...
| Code: | #include "drivers/lirc_dev/lirc_dev.h"
#include "drivers/kcompat.h"
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,14)
# define I2C_ALGO_BIT 0
#endif
struct IR {
struct lirc_plugin l; |
_________________
Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect.
--Linus Torvalds
My site with some gentoo config files:
http://je-fro.net/page.html |
|
| Back to top |
|
|
je_fro
Retired Dev
Joined: 14 Dec 2002
Posts: 236
Location: Republic of Texas
|
| Posted: Thu Nov 24, 2005 5:25 am Post subject: |
|
|
heh...it built, but doesn't seem to work just yet.
whoops!
_________________
Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect.
--Linus Torvalds
My site with some gentoo config files:
http://je-fro.net/page.html |
|
| Back to top |
|
|
Featherfoot
Veteran
Joined: 28 Dec 2002
Posts: 1108
Location: Stuart, Florida
|
| Posted: Sat Nov 26, 2005 3:40 am Post subject: |
|
|
Same problem here.
dmesg gives the following:
| Code: |
irc_gpio: disagrees about version of symbol struct_module
|
|
|
| Back to top |
|
|
jmercer
Tux's lil' helper
Joined: 15 Nov 2002
Posts: 95
Location: Newfoundland, Canada
|
| Posted: Sat Nov 26, 2005 9:17 pm Post subject: |
|
|
| I was able to cleanly emerge the lirc module on my system, 2.6.14-gentoo-r2, but it wouldn't insmod properly. It was complaining about Unknown symbol verify_area. I used a module created by a guy to get around the same type of problem with the proprietary ATI drivers. After grabbing the code for the work around from http://www.colino.net/wordpress-1.5/archives/2005/10/29/fglrx-unknown-symbol-verify_area/ and make install, everything is now working properly. |
|
| Back to top |
|
|
Grooby
n00b
Joined: 08 Jun 2005
Posts: 47
|
| Posted: Sun Nov 27, 2005 3:30 pm Post subject: |
|
|
| I wasn't able to do neither of those 2 patches. Might just downgrade to 2.6.13 til lirc is fixed? |
|
| Back to top |
|
|
shelby
n00b
Joined: 01 Nov 2005
Posts: 14
Location: Yucaipa, California
|
| Posted: Tue Dec 13, 2005 4:54 pm Post subject: |
|
|
I tried the patches and no go. How would I downgrade to a older version of the kernel?
_________________
Shelby |
|
| Back to top |
|
|
ChojinDSL
l33t
Joined: 07 Jul 2003
Posts: 784
|
| Posted: Wed Dec 14, 2005 2:03 am Post subject: |
|
|
Well you could either try masking a specific kernel version via the portage config files.
Or simply jump into /usr/portage/sys-kernel/gentoo-sources and emerge "gentoo-sources-version" directly. Then just make sure your /usr/src/linux symlink is order and you are good to go. |
|
| Back to top |
|
|
AchilleTalon
Guru
Joined: 11 Apr 2004
Posts: 368
Location: Montreal, Quebec, Canada
|
| Posted: Tue Dec 27, 2005 10:06 pm Post subject: |
|
|
I have the same problem with 2.6.14-r5. However, I downloaded the lirc software directly from www.lirc.org and tried to build the version 0.7.2 of it.
In lirc_i2c.c, I just inverted the order of the following two lines, near line 24:
From,
| Code: |
#include "drivers/kcompat.h"
#include "drivers/lirc_dev/lirc_dev.h"
|
to,
| Code: |
#include "drivers/lirc_dev/lirc_dev.h"
#include "drivers/kcompat.h"
|
lirc_dev.h includes linux/fs.h which includes interrupt.h which defines irqreturn_t, kcompat.h will not redefines irqreturn_t if it is already defined, however, interrupt.h will try to redefines irqreturn_t even if it is already defined. Reversing the order make sure irqreturn_t is defined by <linux/interrupt.h> before kcompat.h is called.
Now I am struggling with another problem with the I2C_ALGO_BIT not defined... Will post when something found on this.
I added in the kcompat.h, at the end before the last #endif the following lines:
| Code: |
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,14)
#define I2C_ALGO_BIT 0
#endif
|
as described above by je_fro, I was then able to compile everthing fine and install. I loaded the driver without any problem since then.
The conclusion for version 0.7.2 of lirc and 2.6.14-r5 of gentoo-kernel is the patch describe by je_fro should work as is. Mine is just a variant of the same thing.
_________________
Achille Talon Hop! |
|
| Back to top |
|
|
amorgen
n00b
Joined: 11 Apr 2005
Posts: 21
Location: Aix en Provence
|
| Posted: Sat Dec 31, 2005 1:39 pm Post subject: |
|
|
Hello all,
Thank you AchilleTalon and je_fro for your explanations. But weedy and I have the same problem: "URB_ASYNC_UNLINK" (see weedy logfile above)
I followed what you said: emerge lirc and type Ctrl+Z when the source is unpacked, then I edited | Code: | | /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/lirc_i2c/lirc_i2c.c |
altering the 2 lines, and finally edited | Code: | | /var/tmp/portage/lirc-0.7.2/work/lirc-0.7.2/drivers/kcompat.h |
adding
| Code: |
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,14)
#define I2C_ALGO_BIT 0
#endif
|
before the last #endif of the file. The "fg" command finishes the process but ends up with the same error for me.
Could you help us one more time please ? Thanks in advance. |
|
| Back to top |
|
|
AchilleTalon
Guru
Joined: 11 Apr 2004
Posts: 368
Location: Montreal, Quebec, Canada
|
| Posted: Tue Jan 03, 2006 4:19 pm Post subject: |
|
|
Your error is from the atiusb filetree for the atiusb driver. Since I didn't built this driver, I cannot help you much with it. I am using the hauppauge driver which didn't required anything from that part (atiusb) of the filetree. What I would try in your case, edit lirc_atiusb/lirc_atiusb.c instead of lirc_i2c/lirc_i2c.c and swap the two lines 59 and 60:
| Code: |
#include "drivers/kcompat.h"
#include "drivers/lirc_dev/lirc_dev.h"
|
to
| Code: |
#include "drivers/lirc_dev/lirc_dev.h"
#include "drivers/kcompat.h"
|
_________________
Achille Talon Hop! |
|
| Back to top |
|
|
coscarart
n00b
Joined: 04 Jun 2003
Posts: 25
|
| Posted: Tue Jan 03, 2006 5:09 pm Post subject: |
|
|
Using 2.6.14 mine compiles cleanly using irman but I am getting unknown symbols
lirc_dev: Unknown symbol class_simple_device_add
lirc_dev: Unknown symbol class_simple_destroy
lirc_dev: Unknown symbol class_simple_device_remove
lirc_dev: Unknown symbol class_simple_create
lirc_serial: Unknown symbol verify_area
lirc_serial: Unknown symbol lirc_unregister_plugin
lirc_serial: Unknown symbol lirc_register_plugin |
|
| Back to top |
|
|
crowbert
Tux's lil' helper
Joined: 28 Apr 2003
Posts: 145
|
| Posted: Tue Jan 03, 2006 8:34 pm Post subject: Use lirc-0.8.0_pre3 |
|
|
I had to upgrade in order to get drivers for new hardware (I bought a new DVB card). With 2.6.14, I had good luck with lirc-0.8.0_pre1. With 2.6.15, that broke, but lirc-0.8.0_pre3 works.
You can get the source at:
http://lirc.sourceforge.net/software/snapshots/
I copied the -0.7.2 ebuild, manually downloaded -0.8.0pre3, renamed it (to add the expected underscore), and added a lien to the src_unpack() function "mv -f lirc-0.?.?pre* ${S}" to correct the directory paths.
So other than Portage expecting -0.8.0_pre3, and the source using -0.8.0pre3, it all installs perfectly.
Now if only they would put in an official ebuild for -0.8.0_pre3, then we would be all set. |
|
| Back to top |
|
|
coscarart
n00b
Joined: 04 Jun 2003
Posts: 25
|
| Posted: Wed Jan 04, 2006 9:11 pm Post subject: |
|
|
I used your instructions and upgraded to lirc-0.8.0_pre3 (Thanks!), and I got the same unknown symbols messages. I am going to go to the lirc website and look for answers.
Edit: I am going to start my own thread so I don't hijack this one |
|
| Back to top |
|
|
salty dog
n00b
Joined: 10 Jun 2004
Posts: 3
|
| Posted: Sat Jan 14, 2006 6:53 pm Post subject: FWIW: 2.6.14-r5, hauppauge PVR150 |
|
|
| Following the gentoo HOWTO wiki for MythTV setup, I needed to add LIRC_OPTS="--with-driver=hauppauge" to /etc/make.conf and the add app-misc/lirc ~x86 to my /etc/portage/package.keywords. Maybe there is a like option for lirc with ATI usb. Then I almost always use emerge -aD. Doing all of this additionally pulled in the dev-libs/libusb in the emerge and everything has compiled cleanly. Still some work todo to know it works... but as postage here in the US has gone up, thought it a good idea to add my 2 cents. HTH. |
|
| Back to top |
|
|
|
Kernel & Hardware
