Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Direct Rendering in VMWare 5
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gamers & Players
View previous topic :: View next topic  
Author Message
shadowknight
Tux's lil' helper
Tux's lil' helper


Joined: 03 Aug 2002
Posts: 142

PostPosted: Mon Oct 31, 2005 10:23 pm    Post subject: Direct Rendering in VMWare 5 Reply with quote

I've been trying to convince my dad to give up winblows and make the gentoo switch. I installed to VMWare Workstation 5 with windows xp as host. The Pc is Dell Dimension 2400, little over 1gig ram, on board video (no agp or pci-e :cry: but will be ordering FX5200 256Mb pci within the week :wink: ) New hd is on the way so a legitimate install is in the works, in the meantime however, I can't seem to get direct rendering working. I'm going to post my log and dmesg, also my xorg.conf It's not really a big deal since full install is inevitable, I'm doing this more for the experience now. Any suggestions would be appreciated.

dmesg:

Code:
Linux version 2.6.13-gentoo-r3 (root@Tux) (gcc version 3.3.6 (Gentoo 3.3.6, ssp-3.3.6-1.0, pie-8.7.8)) #1 SMP Mon Oct 31 10:49:45 CST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000027ef0000 (usable)
 BIOS-e820: 0000000027ef0000 - 0000000027efc000 (ACPI data)
 BIOS-e820: 0000000027efc000 - 0000000027f00000 (ACPI NVS)
 BIOS-e820: 0000000027f00000 - 0000000028000000 (usable)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
640MB LOWMEM available.
found SMP MP-table at 000f6ce0
On node 0 totalpages: 163840
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 159744 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6c70
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x27ef8062
ACPI: FADT (v001 INTEL  440BX    0x06040000 PTL  0x000f4240) @ 0x27efbf14
ACPI: MADT (v001 PTLTD      APIC   0x06040000  LTP 0x00000000) @ 0x27efbf88
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x27efbfd8
ACPI: DSDT (v001 PTLTD  Custom   0x06040000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 28000000 (gap: 28000000:d6c00000)
Built 1 zonelists
Kernel command line: vga=ask hda=ide-scsi hdb=ide-scsi root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 udev doscsi
ide_setup: hda=ide-scsi
ide_setup: hdb=ide-scsi
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0483000 soft=c047b000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2404.240 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Tue Aug 16 15:56:58 EDT 2005 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 642940k/655360k available (2574k kernel code, 11664k reserved, 741k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4852.15 BogoMIPS (lpj=9704316)
Mount-cache hash table entries: 512
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: 0febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0febfbff 00000000 00000000 00000080 00000000 00000000 00000000
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 08
Total of 1 processors activated (4852.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1477k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9a0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:00:0f.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 4 of device 0000:00:07.1
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
Simple Boot Flag at 0x36 set to 0x1
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xec000000
vesafb: VMware, Inc, VMware virtual machine, 2.0 (OEM: V M ware, Inc. VBE support 2.0)
vesafb: VBE version: 2.0
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
mtrr: your processor doesn't support write-combining
Console: switching to colour frame buffer device 100x37
vesafb: framebuffer at 0xf0000000, mapped to 0xe8880000, using 16384k, total 16384k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
intelfb: Version 0.9.2
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1470-0x1477, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
hdb: VMware Virtual IDE CDROM Drive, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 16
scsi: ***** BusLogic SCSI Driver Version 2.1.16 of 18 July 2002 *****
scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter
scsi0:   Firmware Version: 5.07B, I/O Address: 0x1440, IRQ Channel: 16/Level
scsi0:   PCI Bus: 0, Device: 16, Address: 0xE8800000, Host Adapter SCSI ID: 7
scsi0:   Parity Checking: Enabled, Extended Translation: Enabled
scsi0:   Synchronous Negotiation: Ultra, Wide Negotiation: Enabled
scsi0:   Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled
scsi0:   Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211
scsi0:   Driver Queue Depth: 211, Host Adapter Queue Depth: 192
scsi0:   Tagged Queue Depth: Automatic, Untagged Queue Depth: 3
scsi0: *** BusLogic BT-958 Initialized Successfully ***
scsi0 : BusLogic BT-958
  Vendor: VMware,   Model: VMware Virtual S  Rev: 1.0
  Type:   Direct-Access                      ANSI SCSI revision: 02
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 16
GDT-HA: Storage RAID Controller Driver. Version: 3.04
GDT-HA: Found 0 PCI Storage RAID Controllers
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: _NEC      Model: DVD_RW ND-2500A   Rev: 1.06
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi2 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: _NEC      Model: DVD_RW ND-3540A   Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 02
libata version 1.12 loaded.
SCSI device sda: 31457280 512-byte hdwr sectors (16106 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 31457280 512-byte hdwr sectors (16106 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
 sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 5
SCSI Media Changer driver v0.25
aoe: aoe_init: AoE v2.6-10 initialised.
pd: pd version 1.05, major 45, cluster 64, nice 0
pda: Autoprobe failed
pd: no valid drive found
pcd: pcd version 1.07, major 46, nice 0
pcd0: Autoprobe failed
pcd: No CD-ROM drive found
pf: pf version 1.04, major 47, cluster 64, nice 0
pf: No ATAPI disk detected
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 224k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 17
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 17, io base 0x00001060
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
NCR53c406a: no available ports found
scsi: <fdomain> Detection failed (no card)
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
NCR53c406a: no available ports found
imm: Version 2.05 (for Linux 2.4.0)
sym53c416.c: Version 1.0.0-ac
ReiserFS: sda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda3
VFS: Can't find ext3 filesystem on dev sda3.
VFS: Can't find an ext2 filesystem on dev sda3.
SQUASHFS error: Can't find a SQUASHFS superblock on sda3
FAT: bogus number of FAT structure
VFS: Can't find a valid FAT filesystem on dev sda3.
scsi0: Tagged Queuing now active for Target 0
Unable to identify CD-ROM format.
UDF-fs: No VRS found
XFS mounting filesystem sda3
Ending clean XFS mount for filesystem: sda3
sr0: Hmm, seems the drive doesn't support multisession CD's
Adding 498004k swap on /dev/sda2.  Priority:-1 extents:1


Xorg.0.log:

Code:

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13-gentoo-r3 i686 [ELF]
Current Operating System: Linux Tux 2.6.13-gentoo-r3 #1 SMP Mon Oct 31 10:49:45 CST 2005 i686
Build Date: 23 October 2005
   Before reporting problems, check http://wiki.X.Org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 31 14:11:53 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "vmware"
(**) |   |-->Device "VMware SVGA"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbModel" "dell101"
(**) XKB: model: "dell101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) The directory "/usr/share/fonts/CID/" does not exist.
   Entry deleted from font path.
(==) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(==) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.2
   X.Org Video Driver: 0.7
   X.Org XInput driver : 0.4
   X.Org Server Extension : 0.2
   X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Video Driver, version 0.7
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 15ad,1976 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 01 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 15ad,1976 rev 08 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 15ad,1976 rev 01 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 15ad,1976 rev 00 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 15ad,1976 rev 08 class 06,80,00 hdr 80
(II) PCI: 00:0f:0: chip 15ad,0405 card 15ad,0405 rev 00 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 104b,1040 card 104b,1040 rev 01 class 01,00,00 hdr 00
(II) PCI: 00:11:0: chip 1022,2000 card 1022,2000 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:12:0: chip 1274,1371 card 1274,1371 rev 02 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:15:0) VMWare Inc unknown chipset (0x0405) rev 0, Mem @ 0xf0000000/27, 0xe8000000/23, I/O @ 0x1460/4
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xec000000 from 0xefffffff to 0xebffffff
(II) Active PCI resource ranges:
   [0] -1   0   0xe8800000 - 0xe880001f (0x20) MX[B]
   [1] -1   0   0xec000000 - 0xebffffff (0x0) MX[B]O
   [2] -1   0   0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
   [3] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [4] -1   0   0x00001400 - 0x0000143f (0x40) IX[B]
   [5] -1   0   0x00001080 - 0x000010ff (0x80) IX[B]
   [6] -1   0   0x00001440 - 0x0000145f (0x20) IX[B]
   [7] -1   0   0x00001060 - 0x0000107f (0x20) IX[B]
   [8] -1   0   0x00001470 - 0x0000147f (0x10) IX[B]
   [9] -1   0   0x00001460 - 0x0000146f (0x10) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xe8800000 - 0xe880001f (0x20) MX[B]
   [1] -1   0   0xec000000 - 0xebffffff (0x0) MX[B]O
   [2] -1   0   0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
   [3] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [4] -1   0   0x00001400 - 0x0000143f (0x40) IX[B]
   [5] -1   0   0x00001080 - 0x000010ff (0x80) IX[B]
   [6] -1   0   0x00001440 - 0x0000145f (0x20) IX[B]
   [7] -1   0   0x00001060 - 0x0000107f (0x20) IX[B]
   [8] -1   0   0x00001470 - 0x0000147f (0x10) IX[B]
   [9] -1   0   0x00001460 - 0x0000146f (0x10) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xe8800000 - 0xe880001f (0x20) MX[B]
   [6] -1   0   0xec000000 - 0xebffffff (0x0) MX[B]O
   [7] -1   0   0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
   [8] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [9] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [10] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [11] -1   0   0x00001400 - 0x0000143f (0x40) IX[B]
   [12] -1   0   0x00001080 - 0x000010ff (0x80) IX[B]
   [13] -1   0   0x00001440 - 0x0000145f (0x20) IX[B]
   [14] -1   0   0x00001060 - 0x0000107f (0x20) IX[B]
   [15] -1   0   0x00001470 - 0x0000147f (0x10) IX[B]
   [16] -1   0   0x00001460 - 0x0000146f (0x10) IX[B](B)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
   compiled for 6.8.2, module version = 2.1.0
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vmware"
(II) Loading /usr/lib/modules/drivers/vmware_drv.o
(II) Module vmware: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 10.10.2
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vmmouse"
(II) Loading /usr/lib/modules/input/vmmouse_drv.o
(II) Module vmmouse: vendor="X.Org Foundation"
   compiled for 4.3.99.902, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) VMWARE(0): VMMOUSE module was loaded
(II) Loading sub module "mouse"
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.4
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(II) Primary Device is: PCI 00:0f:0
(--) Assigning device section with no busID to primary device
(--) Chipset vmware0405 found
(II) resource ranges after xf86ClaimFixedResources() call:
   [0] 0   0   0x000b8000 - 0x000bffff (0x8000) MX[B]
   [1] 0   0   0x000b0000 - 0x000b7fff (0x8000) MX[B]
   [2] 0   0   0x000a0000 - 0x000affff (0x10000) MX[B]
   [3] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [4] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xe8800000 - 0xe880001f (0x20) MX[B]
   [9] -1   0   0xec000000 - 0xebffffff (0x0) MX[B]O
   [10] -1   0   0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
   [11] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [12] 0   0   0x000003c0 - 0x000003df (0x20) IX[B]
   [13] 0   0   0x000003b0 - 0x000003bb (0xc) IX[B]
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x00001400 - 0x0000143f (0x40) IX[B]
   [17] -1   0   0x00001080 - 0x000010ff (0x80) IX[B]
   [18] -1   0   0x00001440 - 0x0000145f (0x20) IX[B]
   [19] -1   0   0x00001060 - 0x0000107f (0x20) IX[B]
   [20] -1   0   0x00001470 - 0x0000147f (0x10) IX[B]
   [21] -1   0   0x00001460 - 0x0000146f (0x10) IX[B](B)
(II) resource ranges after probing:
   [0] 0   0   0x000b8000 - 0x000bffff (0x8000) MX[B]
   [1] 0   0   0x000b0000 - 0x000b7fff (0x8000) MX[B]
   [2] 0   0   0x000a0000 - 0x000affff (0x10000) MX[B]
   [3] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [4] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xe8800000 - 0xe880001f (0x20) MX[B]
   [9] -1   0   0xec000000 - 0xebffffff (0x0) MX[B]O
   [10] -1   0   0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
   [11] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [12] 0   0   0x000003c0 - 0x000003df (0x20) IX[B]
   [13] 0   0   0x000003b0 - 0x000003bb (0xc) IX[B]
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x00001400 - 0x0000143f (0x40) IX[B]
   [17] -1   0   0x00001080 - 0x000010ff (0x80) IX[B]
   [18] -1   0   0x00001440 - 0x0000145f (0x20) IX[B]
   [19] -1   0   0x00001060 - 0x0000107f (0x20) IX[B]
   [20] -1   0   0x00001470 - 0x0000147f (0x10) IX[B]
   [21] -1   0   0x00001460 - 0x0000146f (0x10) IX[B](B)
(II) Setting vga for screen 0.
(--) VMWARE(0): VMware SVGA regs at (0x1460, 0x1461)
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(--) VMWARE(0): caps:  0x000083E2
(--) VMWARE(0): depth: 24
(--) VMWARE(0): bpp:   32
(--) VMWARE(0): vram:  16777216
(--) VMWARE(0): pbase: 0xf0000000
(--) VMWARE(0): mwidt: 2360
(--) VMWARE(0): mheig: 1770
(--) VMWARE(0): depth: 24
(--) VMWARE(0): bpp:   32
(--) VMWARE(0): w.red: 8
(--) VMWARE(0): w.grn: 8
(--) VMWARE(0): w.blu: 8
(--) VMWARE(0): vis:   4
(**) VMWARE(0): Depth 24, (**) framebuffer bpp 32
(==) VMWARE(0): RGB weight 888
(==) VMWARE(0): Default visual is TrueColor
(==) VMWARE(0): Using HW cursor
(==) VMWARE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VMWARE(0): vmware: Using hsync range of 1.00-1000.00 kHz
(II) VMWARE(0): vmware: Using vrefresh range of 1.00-1000.00 Hz
(II) VMWARE(0): Clock range:   0.00 to 400000.00 MHz
(II) VMWARE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) VMWARE(0): Not using mode "1600x1200" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) VMWARE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) VMWARE(0): Virtual size is 1280x1024 (pitch 1280)
(**) VMWARE(0): *Mode "1280x1024": 100.0 MHz, 66.7 kHz, 51.3 Hz
(II) VMWARE(0): Modeline "1280x1024"  100.00  1280 1300 1400 1500  1024 1100 1200 1300
(**) VMWARE(0):  Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) VMWARE(0): Modeline "1280x960"  148.50  1280 1344 1504 1728  960 961 964 1011 +hsync +vsync
(**) VMWARE(0):  Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) VMWARE(0):  Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) VMWARE(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) VMWARE(0):  Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) VMWARE(0): Modeline "1152x768"   65.00  1152 1178 1314 1472  768 771 777 806 +hsync +vsync
(**) VMWARE(0):  Mode "1024x768": 100.0 MHz, 76.9 kHz, 76.9 Hz
(II) VMWARE(0): Modeline "1024x768"  100.00  1024 1100 1200 1300  768 800 900 1000
(**) VMWARE(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) VMWARE(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) VMWARE(0):  Mode "800x600": 100.0 MHz, 90.9 kHz, 101.0 Hz
(II) VMWARE(0): Modeline "800x600"  100.00  800 900 1000 1100  600 700 800 900
(**) VMWARE(0):  Mode "640x480": 100.0 MHz, 111.1 kHz, 158.7 Hz
(II) VMWARE(0): Modeline "640x480"  100.00  640 700 800 900  480 500 600 700
(**) VMWARE(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) VMWARE(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) VMWARE(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) VMWARE(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) VMWARE(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) VMWARE(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(==) VMWARE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 0.1.0
   ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
   compiled for 6.8.2, module version = 1.2.0
   ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] 0   0   0x000b8000 - 0x000bffff (0x8000) MX[B]
   [1] 0   0   0x000b0000 - 0x000b7fff (0x8000) MX[B]
   [2] 0   0   0x000a0000 - 0x000affff (0x10000) MX[B]
   [3] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [4] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [5] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [6] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [7] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [8] -1   0   0xe8800000 - 0xe880001f (0x20) MX[B]
   [9] -1   0   0xec000000 - 0xebffffff (0x0) MX[B]O
   [10] -1   0   0xe8000000 - 0xe87fffff (0x800000) MX[B](B)
   [11] -1   0   0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
   [12] 0   0   0x000003c0 - 0x000003df (0x20) IX[B]
   [13] 0   0   0x000003b0 - 0x000003bb (0xc) IX[B]
   [14] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [15] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [16] -1   0   0x00001400 - 0x0000143f (0x40) IX[B]
   [17] -1   0   0x00001080 - 0x000010ff (0x80) IX[B]
   [18] -1   0   0x00001440 - 0x0000145f (0x20) IX[B]
   [19] -1   0   0x00001060 - 0x0000107f (0x20) IX[B]
   [20] -1   0   0x00001470 - 0x0000147f (0x10) IX[B]
   [21] -1   0   0x00001460 - 0x0000146f (0x10) IX[B](B)
(II) VMWARE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000)
(II) VMWARE(0): Using XFree86 Acceleration Architecture (XAA)
   Screen to screen bit blits
(==) VMWARE(0): Backing store disabled
(==) VMWARE(0): Silken mouse enabled
(WW) VMWARE(0): Option "AGPMode" is not used
(WW) VMWARE(0): Option "AGPFastWrite" is not used
(WW) VMWARE(0): Option "EnablePageFlip" is not used
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) VMWARE(0): vmmouse is available
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/input/mouse0"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Keyboard0: XkbModel: "dell101"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) VMWARE(0): VMMOUSE DEVICE_INIT
(II) VMWARE(0): VMMOUSE DEVICE_ON
(II) VMWARE(0): vmmouse enabled
AUDIT: Mon Oct 31 15:14:54 2005: 11825 X: client 4 rejected from local host


xorg.conf:

Code:

# VMware SVGA

Section "ServerLayout"
   Identifier     "Simple Layout"
   Screen         "Screen 1" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
EndSection

Section "Module"
   Load  "freetype"
   # Load "xtt"
   Load  "extmod"
   Load  "glx"
   Load  "dri"
   Load  "dbe"
   Load  "record"
   Load  "xtrap"
   Load  "type1"
#   Load  "speedo"
EndSection

Section "dri"
     Mode 0666
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "keyboard"
   Option       "XkbModel" "dell101"
   Option       "XkbLayout" "us"
EndSection

Section "InputDevice"

#     Option "Emulate3Timeout"    "50"
#     Option "ChordMiddle"
   Identifier  "Mouse0"
   Driver      "vmmouse"
   Option       "Protocol" "IMPS/2"
   Option       "Device" "/dev/input/mouse0"
   Option       "ZAxisMapping" "4 5"
#    Option "Emulate3Buttons"
EndSection

Section "Monitor"
   Identifier   "vmware"
   VendorName   "VMware, Inc"
   HorizSync    1.0 - 1000.0
   VertRefresh  1.0 - 1000.0
   ModeLine     "640x480" 100.0 640 700 800 900 480 500 600 700
   ModeLine     "800x600" 100.0 800 900 1000 1100 600 700 800 900
   ModeLine     "1024x768" 100.0 1024 1100 1200 1300 768 800 900 1000
   #odeLine     "1152x864" 100.0 1152 1200 1300 1400 864 900 1000 1100
   #odeLine     "1152x900" 100.0 1152 1200 1300 1400 900 1000 1100 1200
   ModeLine     "1280x1024" 100.0 1280 1300 1400 1500 1024 1100 1200 1300
   #odeLine     "1376x1032" 100.0 1376 1400 1500 1600 1032 1100 1200 1300
   ModeLine     "1600x1200" 100.0 1600 1700 1800 1900 1200 1300 1400 1500
   #odeLine     "2364x1773" 100.0 2364 2400 2500 2600 1773 1800 1900 2000
EndSection

Section "Device"
   Identifier  "VMware SVGA"
   Driver      "vmware"
   Option       "AGPMode"    "4"
   Option       "AGPFastWrite"    "True"
   Option       "EnablePageFlip"    "True"
   #Option       "ForcePCIMode"    "True"
EndSection

Section "Screen"

    # Don't specify DefaultColorDepth unless you know what you're
    # doing. It will override the driver's preferences which can
    # cause the X server not to run if the host doesn't support the
    # depth.
   Identifier "Screen 1"
   Device     "VMware SVGA"
   Monitor    "vmware"
   DefaultDepth     24
   DefaultFbBpp    32
   SubSection "Display"

        # VGA mode: better left untouched
      Viewport   0 0
      Depth     4
      Modes    "640x480"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
      Modes    "1280x1024"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
      Modes    "1280x1024"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16
      Modes    "1280x1024"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes    "1280x1024"
   EndSubSection
EndSection


glxinfo:

Code:
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
    GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
    GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
    GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
    GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
    GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
    GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
    GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
    GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x22 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  0  0  0  0  0  0 0 None
0x23 24 tc  0 24  0 r  y  .  8  8  8  0  0 16  8 16 16 16  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None
0x25 24 tc  0 32  0 r  .  .  8  8  8  8  0 16  8 16 16 16 16  0 0 None


sorry for such a long post wasn't sure exactly what was relevant so posted everything 8O
Back to top
View user's profile Send private message
satanskin
Guru
Guru


Joined: 25 Apr 2005
Posts: 353

PostPosted: Mon Oct 31, 2005 11:46 pm    Post subject: Reply with quote

I don't think vmware supports 3D accel. Or if it does, it was a real bitch to setup for poor performance. Let us know if you get it working though.
Back to top
View user's profile Send private message
mnxAlpha
Apprentice
Apprentice


Joined: 15 Sep 2004
Posts: 210

PostPosted: Tue Nov 01, 2005 6:30 am    Post subject: Reply with quote

VMWare only supports 3D acceleration using a Windows host, a Windows guest, in Direct3D only, and even then only if you run through all kinds of hoops to get it working.
Back to top
View user's profile Send private message
Birtz
Apprentice
Apprentice


Joined: 09 Feb 2005
Posts: 272
Location: Osijek / Croatia

PostPosted: Tue Nov 01, 2005 9:00 pm    Post subject: Reply with quote

mnxAlpha wrote:
VMWare only supports 3D acceleration using a Windows host, a Windows guest, in Direct3D only, and even then only if you run through all kinds of hoops to get it working.


Not really ;-) The VmWare Workstation 5 supports OpenGL backend Direct3D rendering on Linux or Windows host, using ofcourse Windows (Win2k or WinXP) guest providing it with Direct3D acceleration (not full and not too fast though). 3DMark2001 works, but stencil things are not implemented nor are any kind of shaders (pixel or vertex). Haven't tried any games, but my GeForce 6800GT is getting GeForce 2 MX scores in 3DMark, so I wouldn't hold my horses.

To enable this acceleration you have to do following;
1. Add following lines to your *.vmx guest file
Code:

mks.enable3d = "TRUE"
svga.vramSize = 134217728

2. Second line is optional and it shows how much "memory" your virtual card has/reports (128MB is maximum allowed).

So, it is not really that hard to enable it ;-)

Regards

Edit

Correction, vertex shaders 1.0 *are* supported. If they would get the stencil buffers to work correctly it would be quite playable for some older games IMHO.
_________________
It is not enough to have a good mind. The main thing is to use it well.
-- Rene Descartes

Don't have a childhood hero? How about Rob Hubbard http://www.freenetpages.co.uk/hp/tcworh/profile.htm
Back to top
View user's profile Send private message
wolf31o2
Retired Dev
Retired Dev


Joined: 31 Jan 2003
Posts: 628
Location: Mountain View, CA

PostPosted: Tue Nov 01, 2005 9:36 pm    Post subject: Reply with quote

I was about to say, who ever said that VMWare supported Direct Rendering?

I'm the maintainer of the package and I can tell you that it surely does not.
_________________
Ex-Gentoo Developer
Catalyst/Genkernel Development Lead
http://wolf31o2.org
Back to top
View user's profile Send private message
Birtz
Apprentice
Apprentice


Joined: 09 Feb 2005
Posts: 272
Location: Osijek / Croatia

PostPosted: Tue Nov 01, 2005 9:47 pm    Post subject: Reply with quote

wolf31o2 wrote:
I was about to say, who ever said that VMWare supported Direct Rendering?

I'm the maintainer of the package and I can tell you that it surely does not.


http://www.vmware.com/support/ws5/doc/ws_vidsound_d3d_enabling_vm.html

Check your arguments and drop elitist attitude if you please ...

Regards
_________________
It is not enough to have a good mind. The main thing is to use it well.
-- Rene Descartes

Don't have a childhood hero? How about Rob Hubbard http://www.freenetpages.co.uk/hp/tcworh/profile.htm
Back to top
View user's profile Send private message
RaZoR1394
Guru
Guru


Joined: 09 Jan 2005
Posts: 356

PostPosted: Tue Nov 01, 2005 9:58 pm    Post subject: Reply with quote

I've heard that the machine can easily crash with this enabled and that only older directx games work so It's nothing I would keep hanging on too. Go with Cedega or Wine instead or even a native Windows installation if you want to game. Vmware 5.5 seems to be coming at the end of the year but I can't see any new info on the Direct3d feature. Have they putten it on ice?
_________________
http://en.wikipedia.org/wiki/Cell_(microprocessor)
Back to top
View user's profile Send private message
Birtz
Apprentice
Apprentice


Joined: 09 Feb 2005
Posts: 272
Location: Osijek / Croatia

PostPosted: Tue Nov 01, 2005 10:07 pm    Post subject: Reply with quote

RaZoR1394 wrote:
I've heard that the machine can easily crash with this enabled and that only older directx games work so It's nothing I would keep hanging on too. Go with Cedega or Wine instead or even a native Windows installation if you want to game. Vmware 5.5 seems to be coming at the end of the year but I can't see any new info on the Direct3d feature. Have they putten it on ice?


I agree, and was surprised to see *any* kind of 3D acceleration implemented in VmWare anyway. As for the 5.5 version, the beta version I have does support this in the same way 5.0 does, so nothing new and no improvements. Hopefully they are going to put some work into this, but since the deadline for release is close I seriously doubt it.
_________________
It is not enough to have a good mind. The main thing is to use it well.
-- Rene Descartes

Don't have a childhood hero? How about Rob Hubbard http://www.freenetpages.co.uk/hp/tcworh/profile.htm
Back to top
View user's profile Send private message
wolf31o2
Retired Dev
Retired Dev


Joined: 31 Jan 2003
Posts: 628
Location: Mountain View, CA

PostPosted: Wed Nov 02, 2005 3:58 pm    Post subject: Reply with quote

Birtz wrote:
Check your arguments and drop elitist attitude if you please ...

I'm sorry, but what attitude?

Do you take that sort of offensive stance with anyone that happens to be a developer, or were you just being an asshole with your panties in a bunch this once?

There is no direct rendering support. Enabling DirectX support is using software to do the rendering, which is why you are getting such low scores. Everything is being done in the CPU. In the future, perhaps you could take the 5 seconds to think over what you're saying, rather than being a pompous asshole who immediately attacks someone with a differing opinion. It is people like you that give the rest of us Linux users a bad name. Try being a little bit nicer next time.
_________________
Ex-Gentoo Developer
Catalyst/Genkernel Development Lead
http://wolf31o2.org
Back to top
View user's profile Send private message
Birtz
Apprentice
Apprentice


Joined: 09 Feb 2005
Posts: 272
Location: Osijek / Croatia

PostPosted: Wed Nov 02, 2005 4:55 pm    Post subject: Reply with quote

I am sorry, but I think you are the offending side here. There is no way to reach 70 FPS on software rendering in 3DMark2001 on my processor, if you still think I am full of B/S, here are some real logs from VmWare itself:
Code:

.... snip ....
Oct 30 09:03:18: vmx| SVGA: Advertising 3D acceleration.
Oct 30 09:03:18: vmx| USB: Initializing UHCI host controller
Oct 30 09:03:18: vmx| USB: Initializing USB Generic backend
Oct 30 09:03:18: vmx| Unexpected error received 22 from USBDEVFS_CONNECTINFO
Oct 30 09:03:18: vmx| VMMon_GetkHzEstimate: Calculated 2209744 kHz
Oct 30 09:03:18: vmx| VLANCE: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks
Oct 30 09:03:18: vmx| Ethernet0 MAC Address: 00:0c:29:83:19:ef
Oct 30 09:03:18: vmx| VMXNET: send cluster threshold is 80, size = 2 recalcInterval is 2 ticks, dontClusterSize is 128
Oct 30 09:03:18: vmx| Using system libcrypto, version 90705F
Oct 30 09:03:18: vmx| VMX_PowerOn: ModuleTable_PowerOn = 1
Oct 30 09:03:18: mks| VTHREAD thread 1 "mks" pid 22321 started
Oct 30 09:03:18: vmx| VTHREAD create thread 1 "mks"
Oct 30 09:03:18: mks| Async MKS thread is alive
Oct 30 09:03:18: vcpu-0| VTHREAD thread 4 "vcpu-0" pid 22322 started
Oct 30 09:03:18: vmx| VTHREAD create thread 4 "vcpu-0"
Oct 30 09:03:18: mks| Connecting to window system.
Oct 30 09:03:18: mks| XINFO X fd is 42
Oct 30 09:03:18: mks| XINFO WARNING: XF86MISC version 0.8
Oct 30 09:03:18: mks| VT redirected kernel output to /dev/tty1
Oct 30 09:03:18: mks| rasterops MMXEXT accelerations enabled
Oct 30 09:03:18: mks| XINFO unsupported XF86VidMode version: 2.2
Oct 30 09:03:18: mks| XINFO XFree86 VidMode 0: 2304x1024 flags: 0x0
Oct 30 09:03:18: mks| XINFO XFree86 VidMode 1: 2176x864 flags: 0x0
Oct 30 09:03:18: mks| XINFO XFree86 VidMode 2: 2048x768 flags: 0x0
Oct 30 09:03:18: mks| XINFO XFree86 VidMode 3: 1600x600 flags: 0x0
Oct 30 09:03:18: mks| XINFO XFree86 VidMode 4: 1280x480 flags: 0x0
Oct 30 09:03:19: mks| KHBKL: Unable to parse keystring at: ''
Oct 30 09:03:19: mks| Supported OpenGL Extensions:
Oct 30 09:03:19: mks| GL_ARB_color_buffer_float GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_half_float_pixel GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shadow GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_object GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_vertex_array GL_HP_occlusion_test GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_copy_depth_to_color GL_NV_depth_clamp GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_texgen_reflection GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum
Oct 30 09:03:19: mks| Current OpenGL Version: 2.0.0 NVIDIA 76.76 major: 2, minor: 0, release: 0
Oct 30 09:03:19: mks| GlBackend: Using GL_ARB_texture_non_power_of_two textures
Oct 30 09:03:19: vcpu-0| APIC: version = 0x10, max LVT = 4
Oct 30 09:03:19: vcpu-0| APIC: LDR = 0x1000000, DFR = 0xffffffff
Oct 30 09:03:19: vcpu-0| PShare: enabled 1, scanRate 32, checkRate 16
.... snip ....
Oct 30 09:03:59: vcpu-0| Guest: vmx_fb: DirectX Runtime Version: 9.02 (00000902).
Oct 30 09:04:00: vcpu-0| Guest: vmx_fb: DirectX Runtime Version: 8.02 (00000802).
Oct 30 09:04:00: vcpu-0| Guest: vmx_fb: DirectX Runtime Version: 9.02 (00000902).
Oct 30 09:04:01: vcpu-0| Guest: vmx_fb: DirectX Runtime Version: 8.02 (00000802).
Oct 30 09:04:01: vcpu-0| Guest: vmx_fb: DirectX Runtime Version: 9.02 (00000902).
Oct 30 09:04:10: vcpu-0| Guest: vmx_fb: DirectX Runtime Version: 8.02 (00000802).
Oct 30 09:04:10: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:04:10: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:10: mks| Trying to upload/download stencil buffer
Oct 30 09:04:10: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:10: mks| Trying to upload/download stencil buffer
Oct 30 09:04:40: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:04:40: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:40: mks| Trying to upload/download stencil buffer
Oct 30 09:04:41: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:41: mks| Trying to upload/download stencil buffer
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:48: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:50: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:52: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:52: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:52: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:04:57: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:07: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:07: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:15: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:05:16: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:16: mks| Trying to upload/download stencil buffer
Oct 30 09:05:16: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:16: mks| Trying to upload/download stencil buffer
Oct 30 09:05:50: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:05:50: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:50: mks| Trying to upload/download stencil buffer
Oct 30 09:05:51: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:51: mks| Trying to upload/download stencil buffer
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:05:56: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:06:03: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:06:09: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:06:28: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:06:28: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:06:28: mks| Trying to upload/download stencil buffer
Oct 30 09:06:29: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:06:29: mks| Trying to upload/download stencil buffer
Oct 30 09:07:11: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:07:11: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:11: mks| Trying to upload/download stencil buffer
Oct 30 09:07:11: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:11: mks| Trying to upload/download stencil buffer
Oct 30 09:07:16: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:17: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:17: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:17: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:17: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:17: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:17: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:54: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:07:55: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:55: mks| Trying to upload/download stencil buffer
Oct 30 09:07:55: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:07:55: mks| Trying to upload/download stencil buffer
Oct 30 09:08:00: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:08:00: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:00: mks| Trying to upload/download stencil buffer
Oct 30 09:08:00: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:00: mks| Trying to upload/download stencil buffer
Oct 30 09:08:16: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:08:16: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:16: mks| Trying to upload/download stencil buffer
Oct 30 09:08:16: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:16: mks| Trying to upload/download stencil buffer
Oct 30 09:08:31: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:08:31: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:31: mks| Trying to upload/download stencil buffer
Oct 30 09:08:31: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:31: mks| Trying to upload/download stencil buffer
Oct 30 09:08:46: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:08:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:46: mks| Trying to upload/download stencil buffer
Oct 30 09:08:46: mks| GlBackendHostCreatePbuffer: Rendering is direct.
Oct 30 09:08:46: mks| Trying to upload/download stencil buffer
Oct 30 09:09:01: vcpu-0| Guest: vmx_fb: Application Version: DirectX 8.
Oct 30 09:09:02: mks| GlBackendHostCreatePbuffer: Rendering is direct.
..... snip .....


The point is that I am too polite a developer to call you an asshole, but with your post you didn't only prove to have elitist attitude but also ignorance.

Regards
_________________
It is not enough to have a good mind. The main thing is to use it well.
-- Rene Descartes

Don't have a childhood hero? How about Rob Hubbard http://www.freenetpages.co.uk/hp/tcworh/profile.htm
Back to top
View user's profile Send private message
Lord Spector
Guru
Guru


Joined: 28 Oct 2003
Posts: 304

PostPosted: Wed Nov 02, 2005 11:36 pm    Post subject: Reply with quote

hm... http://www.vmware.com/support/ws5/doc/ws_vidsound_d3d_limitations.html
_________________
It's all about open source
Back to top
View user's profile Send private message
shadowknight
Tux's lil' helper
Tux's lil' helper


Joined: 03 Aug 2002
Posts: 142

PostPosted: Thu Nov 03, 2005 7:18 am    Post subject: Reply with quote

Wow, I didn't know I was starting something here..............was just wondering if perhaps there was a way, I stumbled across something about it and thought I'd give it a try. I also read something about "mesag3" I think not mesa3d that's is software rendering I think but it's late and past my bed time so maybe I'll look at it tomorrow............or maybe not new hd arriived :twisted: Might be playing for few days. Anyway, thanks for the responses and try to take it easy on each other. Life's stressful enough without having to drag it into here. I don't know about the rest of you, but personally I started learning linux because it made computers fun again.........that being said, I'll just slide back into the shadows now.......
Back to top
View user's profile Send private message
uncleben
n00b
n00b


Joined: 21 May 2004
Posts: 23

PostPosted: Sun Nov 06, 2005 2:13 pm    Post subject: Reply with quote

Direct3D rendering in VMWare 5.5 Beta sure has some improvements over 5.0, in Unreal Tournament there are much less render artifacts and errors.
Back to top
View user's profile Send private message
Birtz
Apprentice
Apprentice


Joined: 09 Feb 2005
Posts: 272
Location: Osijek / Croatia

PostPosted: Sun Nov 06, 2005 6:32 pm    Post subject: Reply with quote

uncleben wrote:
Direct3D rendering in VMWare 5.5 Beta sure has some improvements over 5.0, in Unreal Tournament there are much less render artifacts and errors.


This is great news. Care to tell us what beta build are you using, and did you have to do something different to enable it? I had a build from August this year where I didn't notice any improvements.

Thanks
_________________
It is not enough to have a good mind. The main thing is to use it well.
-- Rene Descartes

Don't have a childhood hero? How about Rob Hubbard http://www.freenetpages.co.uk/hp/tcworh/profile.htm
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gamers & Players All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum