| View previous topic :: View next topic |
| Author |
Message |
arkaine
n00b
Joined: 23 Jun 2004
Posts: 62
Location: Ohio
|
 Posted: Sat Sep 24, 2005 1:48 am Post subject: |
 |
|
| Cinder6 wrote: | | arkaine wrote: | | 1U wrote: |
| arkaine wrote: | argh.... "kernel BUG at fs/reiser4/block_alloc.c: 154"
anybody happen to know why this is happening? |
Does this prevent you from using reiser4 or the kernel? Because I often get errors and just about every kernel is bound to give some, but the thing that matters is if they are warnings or serious ones which prevent you from using it. Can you post a bit more details? |
Everything goes fine, it looks like the everything is working until it gets down to around the part where it runs fsck.reiser4, then mr. error decides to join the party... then i get a ton of lines of gibberish and have to reboot. Now that I think of it...I upgraded to libaal-1.0.5 and reiser4progs-1.0.5 so maybe that has something to do with it...or not. |
Maybe try to update your reiser4 partition to 1.05? |
How do I manage that? I've been meaning to, but you can't rebuild the fs unless it's not mounted ...and this being my root partition, I'm not quite sure. I have a couple Reiser4 LiveCDs but they all have outdated reiser4progs. |
|
| Back to top |
|
 |
Fleta
n00b
Joined: 12 Dec 2004
Posts: 68
|
| Posted: Sat Sep 24, 2005 5:11 am Post subject: |
|
|
ipw2200 failed to compile: | Code: | mkdir -p /var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/tmp/.tmp_versions
cp /usr/include/*.mod /var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/tmp/.tmp_versions
cp: cannot stat `/usr/include/*.mod': No such file or directory
make: [modules] Error 1 (ignored)
make -C /usr/src/linux M=/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6 MODVERDIR=/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/tmp/.tmp_versions modules
make[1]: Entering directory `/usr/src/linux-2.6.13.2-nitro1'
CC [M] /var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.o
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150:48: macro "create_workqueue" passed 2 arguments, but takes just 1
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c: In function `ipw_setup_deferred_work':
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150: error: `create_workqueue' undeclared (first use in this function)
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150: error: (Each undeclared identifier is reported only once
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150: error: for each function it appears in.)
make[2]: *** [/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.o] Error 1
make[1]: *** [_module_/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.13.2-nitro1'
make: *** [modules] Error 2
!!! ERROR: net-wireless/ipw2200-1.0.6 failed.
!!! Function linux-mod_src_compile, Line 491, Exitcode 2
!!! Unable to make KSRC=/usr/src/linux KSRC_OUTPUT=/usr/src/linux IEEE80211_INC=/usr/include all.
!!! If you need support, post the topmost build error, NOT this status message.
|
ieee80211 and ipw2200-firmware compiled successfully though.  |
|
| Back to top |
|
|
iphitus
Apprentice
Joined: 03 Aug 2005
Posts: 226
|
| Posted: Sat Sep 24, 2005 5:30 am Post subject: |
|
|
| Fleta wrote: | ipw2200 failed to compile: | Code: | mkdir -p /var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/tmp/.tmp_versions
cp /usr/include/*.mod /var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/tmp/.tmp_versions
cp: cannot stat `/usr/include/*.mod': No such file or directory
make: [modules] Error 1 (ignored)
make -C /usr/src/linux M=/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6 MODVERDIR=/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/tmp/.tmp_versions modules
make[1]: Entering directory `/usr/src/linux-2.6.13.2-nitro1'
CC [M] /var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.o
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150:48: macro "create_workqueue" passed 2 arguments, but takes just 1
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c: In function `ipw_setup_deferred_work':
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150: error: `create_workqueue' undeclared (first use in this function)
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150: error: (Each undeclared identifier is reported only once
/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.c:10150: error: for each function it appears in.)
make[2]: *** [/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6/ipw2200.o] Error 1
make[1]: *** [_module_/var/tmp/portage/ipw2200-1.0.6/work/ipw2200-1.0.6] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.13.2-nitro1'
make: *** [modules] Error 2
!!! ERROR: net-wireless/ipw2200-1.0.6 failed.
!!! Function linux-mod_src_compile, Line 491, Exitcode 2
!!! Unable to make KSRC=/usr/src/linux KSRC_OUTPUT=/usr/src/linux IEEE80211_INC=/usr/include all.
!!! If you need support, post the topmost build error, NOT this status message.
|
ieee80211 and ipw2200-firmware compiled successfully though. |
I released patches to fix this on the archck webpage as the same problem occurs on archck. The patches apply to the module not the kernel.
http://iphitus.loudas.com/archck.php |
|
| Back to top |
|
|
Cinder6
l33t
Joined: 05 Aug 2004
Posts: 767
Location: California
|
| Posted: Sat Sep 24, 2005 5:40 am Post subject: |
|
|
| arkaine wrote: | | How do I manage that? I've been meaning to, but you can't rebuild the fs unless it's not mounted ...and this being my root partition, I'm not quite sure. I have a couple Reiser4 LiveCDs but they all have outdated reiser4progs. |
Check out the RIP Linux LiveCD. The Gentoo Wiki has an entry on updating reiser4 partitions.
_________________
Knowledge is power.
Power corrupts.
Study hard.
Be evil.
Ugly Overload |
|
| Back to top |
|
|
Fleta
n00b
Joined: 12 Dec 2004
Posts: 68
|
| Posted: Sat Sep 24, 2005 5:56 am Post subject: |
|
|
| iphitus wrote: | | Fleta wrote: | | ipw2200 failed to compile:... |
I released patches to fix this on the archck webpage as the same problem occurs on archck. The patches apply to the module not the kernel.
http://iphitus.loudas.com/archck.php |
How do I apply the patch?  |
|
| Back to top |
|
|
iphitus
Apprentice
Joined: 03 Aug 2005
Posts: 226
|
| Posted: Sat Sep 24, 2005 7:24 am Post subject: |
|
|
| Fleta wrote: | | iphitus wrote: | | Fleta wrote: | | ipw2200 failed to compile:... |
I released patches to fix this on the archck webpage as the same problem occurs on archck. The patches apply to the module not the kernel.
http://iphitus.loudas.com/archck.php |
How do I apply the patch? |
I have no idea how to do it the gentoo way, but if you wish to do it manually...
download the driver's source (http://unc.dl.sourceforge.net/sourceforge/ipw2200/ipw2200-1.0.6.tgz)
extract it. cd into the driver's source directory,
patch -p1 < path/to/patch/ipw2200-fix.diff
then 'make', and as root, 'make install'
will patch and install the driver. |
|
| Back to top |
|
|
tagwar
Tux's lil' helper
Joined: 11 Aug 2004
Posts: 147
Location: Karlsruhe
|
| Posted: Sat Sep 24, 2005 8:30 am Post subject: sata and smart |
|
|
Hi,
just installed on my home machine, which has two sata discs. Now I want to do SMART-readings of my discs from time to time to ensure that everything is OK. For this to work I had to apply a patch that can be found here:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/
the rc7 patch worked for me.
Besides that, everything works as it should, even known problems with additional modules i need (zaptel i.e.) seem to be fixed... great!
greets Tom |
|
| Back to top |
|
|
crazycat
l33t
Joined: 26 Aug 2003
Posts: 838
Location: Hamburg, Germany
|
| Posted: Sat Sep 24, 2005 10:33 pm Post subject: |
|
|
I beg you to include this patch:
| Quote: |
This implementation gives the ability to (really) force unmount a file system. It closes all the open files, flushes their contents, releases file locks and tears down memory maps for the files. The util-linux patch is needed to add the -F option to the mount command.
|
http://developer.osdl.org/dev/fumount/
I think this will greatly improve usability and replaces a fake mount -f option. Also #define NO_DOOR_LOCKING 1 in /usr/src/linux/drivers/block/ide-cd.c will actually make that eject button usefull again. |
|
| Back to top |
|
|
miedo95
n00b
Joined: 21 Apr 2005
Posts: 9
Location: Mexicali, Mexico
|
| Posted: Sat Sep 24, 2005 11:45 pm Post subject: Problem resolved!!! |
|
|
| a13x wrote: | Yeah it works well without the logo.
| Code: |
CC drivers/video/logo/logo.o
drivers/video/logo/logo.c: In function `fb_find_logo':
drivers/video/logo/logo.c:84: error: `logo_nitro_clut224' undeclared (first use in this function)
drivers/video/logo/logo.c:84: error: (Each undeclared identifier is reported only once
drivers/video/logo/logo.c:84: error: for each function it appears in.)
make[3]: *** [drivers/video/logo/logo.o] Error 1
make[2]: *** [drivers/video/logo] Error 2
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2
|
x2 |
step for resolved problem
first:
go to
/usr/src/linux/drivers/video/
edit logo.c
| Code: |
extern const struct linux_logo logo_linux_mono;
extern const struct linux_logo logo_linux_vga16;
extern const struct linux_logo logo_linux_clut224;
extern const struct linux_logo logo_dec_clut224;
extern const struct linux_logo logo_mac_clut224;
extern const struct linux_logo logo_parisc_clut224;
extern const struct linux_logo logo_sgi_clut224;
extern const struct linux_logo logo_sun_clut224;
extern const struct linux_logo logo_superh_mono;
extern const struct linux_logo logo_superh_vga16;
extern const struct linux_logo logo_superh_clut224;
extern const struct linux_logo logo_m32r_clut224;
extern const struct linux_logo logo_nitro_clut224; <---------------- add line the code
|
save an close edit
second:
backup
mv logo_nitro_clut224.ppm logo_nitro_clut224.ppm_old
write
pnmnoraw logo_nitro_clut224.ppm_old > logo_nitro_clut224.ppm
edit Makeconfig
| Code: |
obj-$(CONFIG_LOGO_NITRI_CLUT224) += logo_nitro_clut224.o
for
obj-$(CONFIG_LOGO_NITRO_CLUT224) += logo_nitro_clut224.o
|
finish:
compile the kernel 
make clean
make
ok!!!!
_________________
La informacion es poder!!! |
|
| Back to top |
|
|
|cub|
n00b
Joined: 12 Feb 2005
Posts: 59
Location: UA
|
| Posted: Sun Sep 25, 2005 1:11 pm Post subject: Re: Problem resolved!!! |
|
|
i was following instrucions and get | Code: | CC drivers/video/logo/logo.o
LOGO drivers/video/logo/logo_linux_mono.c
CC drivers/video/logo/logo_linux_mono.o
LOGO drivers/video/logo/logo_linux_vga16.c
CC drivers/video/logo/logo_linux_vga16.o
LOGO drivers/video/logo/logo_linux_clut224.c
CC drivers/video/logo/logo_linux_clut224.o
LOGO drivers/video/logo/logo_nitro_clut224.c
drivers/video/logo/logo_nitro_clut224.ppm: Binary PNM is not supported
Use pnmnoraw(1) to convert it to ASCII PNM
make[3]: *** [drivers/video/logo/logo_nitro_clut224.c] Error 1
make[2]: *** [drivers/video/logo] Error 2
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2
|
Last edited by |cub| on Sun Sep 25, 2005 1:48 pm; edited 1 time in total |
|
| Back to top |
|
|
owtput
n00b
Joined: 29 Aug 2005
Posts: 1
|
| Posted: Sun Sep 25, 2005 1:34 pm Post subject: Re: Problem resolved!!! |
|
|
| miedo95 wrote: |
step for resolved problem
first:
...
finish:
ok!!!! |
It works perfectly here. It requires a very small amount of hacking, but it's all worth while. |
|
| Back to top |
|
|
Guinpen
Guru
Joined: 08 Dec 2004
Posts: 393
|
| Posted: Sun Sep 25, 2005 1:59 pm Post subject: |
|
|
Hello,
First of all thanks for the hard work that went into nitro-sources.
I used to have a very nicely working 2.6.12-morph7 which I replaced with this release, running make oldconfig over the morph config file. I've noticed a substantial performance decrease: it feels like the computer is swapping more than it needs to. It's a Dell laptop with PM1.3/512RAM and has another 512 swap. In the configuration posted below, you'll notice I've turned off the patch that deals with keeping some stuff both in swap and RAM in order to prevent unnecessary swapping; when I had it enabled the performance decrease was even larger for some reason. I'm not sure what to do about it.
Also, if I compile more than one IO scheduler, how can I choose which one is used? Can I switch them while the system is running?
I'll be very grateful for any advice.
| Code: |
Portage 2.0.52-r1 (default-linux/x86/2005.1, gcc-3.4.4, glibc-2.3.5-r1, 2.6.13.2-nitro1 i686)
=================================================================
System uname: 2.6.13.2-nitro1 i686 Intel(R) Pentium(R) M processor 1300MHz
Gentoo Base System version 1.12.0_pre8
dev-lang/python: 2.4.1-r1
sys-apps/sandbox: 1.2.13
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6
sys-devel/binutils: 2.16.1
sys-devel/libtool: 1.5.20
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=pentium-m -mtune=pentium-m -pipe -ftracer -fomit-frame-pointer -ffast-math -momit-leaf-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo /etc/texmf/web2c /etc/env.d"
CXXFLAGS="-O2 -march=pentium-m -mtune=pentium-m -pipe -ftracer -fomit-frame-pointer -ffast-math -momit-leaf-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks sandbox sfperms strict"
GENTOO_MIRRORS="ftp://mirror.iu-bremen.de/gentoo/mirror/ http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/"
LDFLAGS="-Wl,-O1"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="X a52 aac aalib acpi alsa apache2 arts atlas audiofile avi bash-completion bindist bitmap-fonts bzlib calendar cdparanoia cdr cpdflib crypt ctype cups dedicated dga dio directfb divx4linux doc dv dvd dvdr dvdread encode exif fbcon ffmpeg firefox flac flash fortran ftp gd ggi gif glut gphoto2 gtk gtk2 gtkhtml hal howl iconv icq ieee1394 imagemagick imap imlib ithreads java javascript jikes jpeg junit kde kdeenablefinal lame libcaca libwww live mad matroska mcal ming mmx mmx2 mono monodoc mp3 mpeg mpi msn mysql ncurses nis nocd nptl nptlonly nsplugin nvidia offensive ogg oggvorbis openal opengl pam pcmcia pdf pdflib perl php pic pie plotutils png portaudio posix ppds prelude python qt quicktime readline real samba scanner sdl session sharedext simplexml slang sndfile sockets spell spl sse sse2 ssl subversion svg svga symlink tcltk tcpd tetex theora threads tiff tokenizer truetype truetype-fonts trusted type1-fonts unicode usb userlocales v4l vcd video videos vidix-voodoo3 vorbis vorbix wifi win32codecs wmf wxwindows x86 xine xml xml2 xsl xv xvid zlib video_cards_nvidia userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LINGUAS
|
.config:
| Code: |
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.13.2-nitro1 "Down with latency!"
# Fri Sep 23 15:45:32 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
# CONFIG_SWAP_PREFETCH is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_1GLOWMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set
#
# Win4Lin 9x Support
#
# CONFIG_MKI is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_SUSPEND2 is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
CONFIG_PCCARD_NONSTATIC=y
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=y
CONFIG_AIRO_CS=y
# CONFIG_PCMCIA_WL3501 is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_NR_TTY_DEVICES=63
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_VIA is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_SENSOR is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VESA_STD is not set
CONFIG_FB_VESA_TNG=y
CONFIG_FB_VESA_DEFAULT_MODE="1024x768-32@60"
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y
CONFIG_FB_SPLASH=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HID_MOUSE_POLLING_INTERVAL=2
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
CONFIG_XFS_FS=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_UNIONFS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_SH_FS=y
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZF is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_GENETIC_LIB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
|
|
|
| Back to top |
|
|
bollucks
l33t
Joined: 27 Oct 2004
Posts: 606
|
| Posted: Sun Sep 25, 2005 2:09 pm Post subject: |
|
|
| Swap prefetching is still experimental and in heavy development if you check the -ck mailing list there are real regressions noted prior to versions 10 (like in this nitro kernel). We're currently up to version 11 which is in 2.6.13-ck6. Of course this doesn't answer your question exactly... |
|
| Back to top |
|
|
Guinpen
Guru
Joined: 08 Dec 2004
Posts: 393
|
| Posted: Sun Sep 25, 2005 3:22 pm Post subject: |
|
|
| Just to make sure I said it clearly enough: even without that patch performance is significantly lower than with 2.6.12-morph7. Turning off swap makes the system fly but with swap, it's really bad. |
|
| Back to top |
|
|
ingvarr
n00b
Joined: 25 Sep 2005
Posts: 1
|
| Posted: Sun Sep 25, 2005 7:20 pm Post subject: |
|
|
| Godji wrote: | | Just to make sure I said it clearly enough: even without that patch performance is significantly lower than with 2.6.12-morph7. Turning off swap makes the system fly but with swap, it's really bad. |
http://ck.kolivas.org/patches/swap-prefetch/ck5_sp11.patch over 2.6.13.2-nitro1 helps. I'm happy now. |
|
| Back to top |
|
|
1U
Guru
Joined: 21 Jul 2005
Posts: 319
|
| Posted: Sun Sep 25, 2005 8:22 pm Post subject: |
|
|
Is it ok to have no swap? I'd like to disable mine and I have a gig of ram which I've never even fully used yet. If it's ok, which options do I have to disable in the kernel and are there any other changes that are required?
Thanks |
|
| Back to top |
|
|
tagwar
Tux's lil' helper
Joined: 11 Aug 2004
Posts: 147
Location: Karlsruhe
|
| Posted: Sun Sep 25, 2005 8:44 pm Post subject: |
|
|
Correct me if I'm wrong please...
| 1U wrote: | | Is it ok to have no swap? |
Well, it should be possible. I don't think its a good idea though. If you're not realy low on harddisc-space, what would be the benefit of not using swap? I mean, since you say you never completely use your 1gig of ram, you never use swap anyway. But should you ever happen to need more that your 1 gig, you might be happy for the extra. In the end it's meant to speed things up, so i'd rather leave some space for swap....
that said, you can "disable" swap by just not mounting a swap partition (i.e. remove the swap line from fstab). Once again, I dont think its a good idea.
You can try it out by doing a
this will disable all swap. To reenable it, do a
|
|
| Back to top |
|
|
TheAlamo
n00b
Joined: 14 Nov 2004
Posts: 38
Location: Frankfurt/Germany
|
| Posted: Sun Sep 25, 2005 9:03 pm Post subject: Re: sata and smart |
|
|
| tagwar wrote: | Hi,
just installed on my home machine, which has two sata discs. Now I want to do SMART-readings of my discs from time to time to ensure that everything is OK. For this to work I had to apply a patch that can be found here:
http://www.kernel.org/pub/linux/kernel/people/jgarzik/libata/
the rc7 patch worked for me.
Besides that, everything works as it should, even known problems with additional modules i need (zaptel i.e.) seem to be fixed... great!
greets Tom |
I've made a similar posting in the 2.6.13.1-nitro1 thread. Everyone who uses libata needs this patch in order to make hdparm, hddtemp, smartctl and stuff like that work.
Please seppe, hear our begging. |
|
| Back to top |
|
|
tagwar
Tux's lil' helper
Joined: 11 Aug 2004
Posts: 147
Location: Karlsruhe
|
| Posted: Sun Sep 25, 2005 9:09 pm Post subject: |
|
|
thanks for posting this. I'm not sure if it is just a placebo effect, but I realy think my system is way more responsive now, whereas without this patch, it was often unresponsive for a second or so... |
|
| Back to top |
|
|
Cinder6
l33t
Joined: 05 Aug 2004
Posts: 767
Location: California
|
| Posted: Sun Sep 25, 2005 9:20 pm Post subject: |
|
|
| ingvarr wrote: | | Godji wrote: | | Just to make sure I said it clearly enough: even without that patch performance is significantly lower than with 2.6.12-morph7. Turning off swap makes the system fly but with swap, it's really bad. |
http://ck.kolivas.org/patches/swap-prefetch/ck5_sp11.patch over 2.6.13.2-nitro1 helps. I'm happy now. |
Isn't ck5 included in nitro?
_________________
Knowledge is power.
Power corrupts.
Study hard.
Be evil.
Ugly Overload |
|
| Back to top |
|
|
bollucks
l33t
Joined: 27 Oct 2004
Posts: 606
|
| Posted: Mon Sep 26, 2005 12:28 am Post subject: |
|
|
| Yeah but that patch upgrades the sp code to that in -ck6. Also there was apparently a bug in the write throttling patch in -ck5 (gone in -ck6) causing stalls so maybe that's the problem and it has nothing to do with swap. |
|
| Back to top |
|
|
Cinder6
l33t
Joined: 05 Aug 2004
Posts: 767
Location: California
|
| Posted: Mon Sep 26, 2005 2:52 am Post subject: |
|
|
k, thanks. I applied the patch, but I don't think I notice anything different (it might be slightly more responsive, but I still sometimes get lag).
nitro2, seppe? 
_________________
Knowledge is power.
Power corrupts.
Study hard.
Be evil.
Ugly Overload |
|
| Back to top |
|
|
1U
Guru
Joined: 21 Jul 2005
Posts: 319
|
| Posted: Mon Sep 26, 2005 4:04 am Post subject: |
|
|
| Cinder6 wrote: | | nitro2, seppe? |
That would be great, especially if the second would have the logo problem resolved along with any other easy problems. This one is running great so far, but there's always room for improvement  . |
|
| Back to top |
|
|
tagwar
Tux's lil' helper
Joined: 11 Aug 2004
Posts: 147
Location: Karlsruhe
|
| Posted: Mon Sep 26, 2005 5:21 am Post subject: |
|
|
| 1U wrote: | | That would be great, especially if the second would have the logo problem resolved along with any other easy problems. This one is running great so far, but there's always room for improvement . |
Well, I don't think I want to install a new kernel just because of a nice logo (I use gensplash, so I don't see it anyway)...
So we already got the update to ck6 (if I understood that right), what else should be different in a 2.6.13-nitro2 ?
On my wishlist, there is
- LIRC integration
- IPW2X00 integration
- Any speedups (as always)
- and the "I need a coffee module".. damn it's too early here to think of a list like this..
Got to get a coffee... |
|
| Back to top |
|
|
Cinder6
l33t
Joined: 05 Aug 2004
Posts: 767
Location: California
|
| Posted: Mon Sep 26, 2005 5:42 am Post subject: |
|
|
No, we don't have ck6 yet, which is why I want a nitro2 All that the previous patch is for is the prefetching of swappy stuff.
_________________
Knowledge is power.
Power corrupts.
Study hard.
Be evil.
Ugly Overload |
|
| Back to top |
|
|
|
Unsupported Software
