Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Keyboard repeat rate on VTs slows after starting X
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
splutz
n00b
n00b


Joined: 25 Feb 2006
Posts: 6

PostPosted: Sat Feb 25, 2006 1:41 pm    Post subject: Keyboard repeat rate on VTs slows after starting X Reply with quote

Hi,

After I launch X, the keyboard repeat rate on virtual terminals slows to a crawl. It stays that way even after X is shut down, and it has to be reset with kbdrate.

Version of X installed: xorg-x11-6.8.2-r6

What in X might be resetting this and how can I fix it?

Thanks.

Xorg log output is below:

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/localhost:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.15-gentoo-r1 i686 [ELF]
Current Operating System: Linux localhost 2.6.15-gentoo-r1 #3 PREEMPT Tue Feb 21 18:57:44 CST 2006 i686
Build Date: 12 February 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 24 17:46:38 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Main Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Optiquest"
(**) | |-->Device "ATI Rage 128 Pro"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 5"
(**) Option "XLeds" "1 2 3"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/share/fonts/misc:unscaled,/usr/share/fonts/Type1,/usr/share/fonts/TTF,/usr/share/fonts/corefonts,/usr/share/fonts/freefont,/usr/share/fonts/sharefonts,/usr/share/fonts/terminus,/usr/share/fonts/ttf-bitstream-vera,/usr/share/fonts/unifont,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/artwiz"
(==) RgbPath set to "/usr/lib/X11/rgb"
(**) ModulePath set to "/usr/lib/modules"
(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "20"
(**) Option "SuspendTime" "30"
(**) Option "OffTime" "60"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0d:0: chip 1274,1371 card 1274,1371 rev 08 class 04,01,00 hdr 00
(II) PCI: 00:0f:0: chip 1186,1300 card 1186,1301 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5046 card 1002,0404 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf0100000 - 0xf01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS rev 0, Mem @ 0xf8000000/26, 0xf0100000/14, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf4000000 from 0xf7ffffff to 0xf3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[1] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[2] -1 0 0xf0100000 - 0xf0103fff (0x4000) MX[B](B)
[3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[5] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[6] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[7] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[8] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[1] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[2] -1 0 0xf0100000 - 0xf0103fff (0x4000) MX[B](B)
[3] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[4] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[5] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[6] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[7] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[8] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[7] -1 0 0xf0100000 - 0xf0103fff (0x4000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[13] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[14] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[15] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "record"
(II) Loading /usr/lib/modules/extensions/librecord.a
(II) Module record: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "r128"
(II) Loading /usr/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9200PRO 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE),
ATI Radeon Mobility X600 (M24) 3150 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireGL D1100 (RV370) 5B65 (PCIE),
ATI Radeon Mobility M300 (M22) 5460 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI FireGL V7200 (R423) UQ (PCIE), ATI FireGL V5100 (R423) UR (PCIE),
ATI FireGL V7100 (R423) UT (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro GL PF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[7] -1 0 0xf0100000 - 0xf0103fff (0x4000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[12] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[13] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[14] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[15] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[6] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[7] -1 0 0xf0100000 - 0xf0103fff (0x4000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[15] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[16] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[17] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[18] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) R128(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/modules/linux/libint10.a
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro GL PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0xf8000000
(--) R128(0): MMIO registers at 0xf0100000
(--) R128(0): VideoRAM: 16384 kByte (64-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(WW) R128(0): Can't determine panel dimensions, and none specified. Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=40000; xclk=14300
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/modules/libvbe.a
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 16384 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level 2
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read successfully
(II) R128(0): Manufacturer: OQI Model: 4a32 Serial#: 646
(II) R128(0): Year: 1998 Week: 49
(II) R128(0): EDID Version: 1.0
(II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) R128(0): Sync: Separate Composite SyncOnGreen
(II) R128(0): Max H-Image Size [cm]: horiz.: 37 vert.: 28
(II) R128(0): Gamma: 2.98
(II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) R128(0): redX: 0.626 redY: 0.340 greenX: 0.310 greenY: 0.592
(II) R128(0): blueX: 0.150 blueY: 0.063 whiteX: 0.281 whiteY: 0.311
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 720x400@70Hz
(II) R128(0): 720x400@88Hz
(II) R128(0): 640x480@60Hz
(II) R128(0): 640x480@67Hz
(II) R128(0): 640x480@72Hz
(II) R128(0): 640x480@75Hz
(II) R128(0): 800x600@56Hz
(II) R128(0): 800x600@60Hz
(II) R128(0): 800x600@72Hz
(II) R128(0): 800x600@75Hz
(II) R128(0): 832x624@75Hz
(II) R128(0): 1024x768@87Hz (interlaced)
(II) R128(0): 1024x768@60Hz
(II) R128(0): 1024x768@70Hz
(II) R128(0): 1024x768@75Hz
(II) R128(0): 1280x1024@75Hz
(II) R128(0): 1152x870@75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) R128(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) R128(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) R128(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) R128(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) R128(0): #5: hsize: 1280 vsize 960 refresh: 85 vid: 22913
(II) R128(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) R128(0): #7: hsize: 1600 vsize 1200 refresh: 70 vid: 19113
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 157.5 MHz Image Size: 360 x 270 mm
(II) R128(0): h_active: 1280 h_sync: 1348 h_sync_end 1508 h_blank_end 1728 h_border: 0
(II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 157.5 MHz Image Size: 360 x 270 mm
(II) R128(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 175.5 MHz Image Size: 360 x 270 mm
(II) R128(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) R128(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 202.5 MHz Image Size: 360 x 270 mm
(II) R128(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) R128(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(==) R128(0): Write-combining range (0xf8000000,0x1000000)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(WW) R128(0): config file hsync range 30-95kHz not within DDC hsync ranges.
(WW) R128(0): config file vrefresh range 50-150Hz not within DDC vrefresh ranges.
(II) R128(0): Optiquest: Using hsync range of 30.00-95.00 kHz
(II) R128(0): Optiquest: Using vrefresh range of 50.00-150.00 Hz
(II) R128(0): Clock range: 12.50 to 400.00 MHz
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) R128(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) R128(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) R128(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) R128(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) R128(0): Virtual size is 1528x1146 (pitch 1528)
(**) R128(0): *Mode "1528x1146": 193.6 MHz, 94.9 kHz, 78.7 Hz
(II) R128(0): Modeline "1528x1146" 193.55 1528 1592 1912 2040 1146 1148 1160 1206
(**) R128(0): *Mode "1400x1050": 181.3 MHz, 94.8 kHz, 87.0 Hz
(II) R128(0): Modeline "1400x1050" 181.31 1400 1464 1784 1912 1050 1052 1064 1090
(**) R128(0): *Mode "1280x1024": 157.5 MHz, 91.8 kHz, 85.0 Hz
(II) R128(0): Modeline "1280x1024" 157.50 1280 1348 1508 1716 1024 1025 1028 1080 +hsync +vsync
(**) R128(0): *Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) R128(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
(**) R128(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) R128(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) R128(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) R128(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) R128(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) R128(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) R128(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) R128(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) R128(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "1024x768" 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync
(**) R128(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) R128(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) R128(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) R128(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) R128(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync
(**) R128(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync
(**) R128(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync
(**) R128(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) R128(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) R128(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) R128(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) R128(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "800x600" 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) R128(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) R128(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) R128(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(II) R128(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) R128(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(II) R128(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) R128(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) R128(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) R128(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) R128(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(II) R128(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync
(**) R128(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) R128(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(II) R128(0): Modeline "640x512" 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync
(**) R128(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
(**) R128(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) R128(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) R128(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync
(**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) R128(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) R128(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) R128(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) R128(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) R128(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) R128(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) R128(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) R128(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) R128(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) R128(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) R128(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) R128(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) R128(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) R128(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) R128(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) R128(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) R128(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) R128(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) R128(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) R128(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) R128(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) R128(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) R128(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) R128(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) R128(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) R128(0): Modeline "512x384" 22.45 512 516 604 632 384 384 388 409 interlace doublescan +hsync +vsync
(**) R128(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) R128(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) R128(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) R128(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync
(**) R128(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) R128(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) R128(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) R128(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) R128(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) R128(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) R128(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) R128(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) R128(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) R128(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync
(**) R128(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) R128(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) R128(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) R128(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) R128(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) R128(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(**) R128(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) R128(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync
(**) R128(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) R128(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync
(**) R128(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) R128(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync
(--) R128(0): Display dimensions: (370, 280) mm
(--) R128(0): DPI set to (104, 103)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf0100000 - 0xf0103fff (0x4000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf0000000 - 0xf00000ff (0x100) MX[B]
[8] -1 0 0xf4000000 - 0xf3ffffff (0x0) MX[B]O
[9] -1 0 0xf0100000 - 0xf0103fff (0x4000) MX[B](B)
[10] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[14] 0 0 0x00009000 - 0x000090ff (0x100) IS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[18] -1 0 0x00001400 - 0x0000143f (0x40) IX[B]
[19] -1 0 0x00001440 - 0x0000145f (0x20) IX[B]
[20] -1 0 0x00001460 - 0x0000146f (0x10) IX[B]
[21] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) R128(0): Write-combining range (0xf8000000,0x1000000)
(WW) R128(0): Static buffer allocation failed -- need at least 20521 kB video memory
(II) R128(0): Memory manager initialized to (0,0) (1528,2744)
(II) R128(0): Reserved area from (0,1146) to (1528,1148)
(II) R128(0): Largest offscreen area available: 1528 x 1596
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
9 256x256 slots
4 512x512 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 4592)
(II) R128(0): Largest offscreen area available: 1528 x 1594
(**) Option "dpms"
(**) R128(0): DPMS enabled
(II) R128(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "PS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "XLeds" "1 2 3"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
SetClientVersion: 0 8
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
Back to top
View user's profile Send private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy

PostPosted: Sun Feb 26, 2006 5:43 am    Post subject: Reply with quote

Quote:
SetClientVersion: 0 8
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0

It looks like either you have an AutoRepeat option line in your keyboard input device setion of xorg.conf, or it is defaulting to these values. i.e. repeat the key at 30 chars/sec after a 500milisecond delay

You can change this by putting an AutoRepeat option of your own there and adjusting the settings as you like. Example:
Code:
    Option      "AutoRepeat"    "250 35"


This would repeat the key at 35 chars/sec after a 250milisecond delay.

If you are running Gnome or KDE, they also have their own settings that can change this.
_________________
Bones McCracker wrote:
On the other hand, regex is popular with the ladies.
Back to top
View user's profile Send private message
splutz
n00b
n00b


Joined: 25 Feb 2006
Posts: 6

PostPosted: Sun Feb 26, 2006 11:48 am    Post subject: Reply with quote

Thanks. Under X these settings are fine. E.g. repeat rate in an xterm is very fast. But if I switch out of X to a virtual console, the rate is much, much slower, just about unusable. Also, it stays that way even if I exit X.

I'm running Xfce v4.2.
Back to top
View user's profile Send private message
yabbadabbadont
Advocate
Advocate


Joined: 14 Mar 2003
Posts: 4791
Location: 2 exits past crazy

PostPosted: Sun Feb 26, 2006 6:15 pm    Post subject: Reply with quote

I think "man kbdrate" is what you need. The console keyboard repeat delay and rate are seperate settings from X. I should have realized what you were asking sooner. Sorry.
_________________
Bones McCracker wrote:
On the other hand, regex is popular with the ladies.
Back to top
View user's profile Send private message
splutz
n00b
n00b


Joined: 25 Feb 2006
Posts: 6

PostPosted: Mon Feb 27, 2006 9:45 am    Post subject: Reply with quote

I have been using kbdrate to reset the keyboard rate on the virtual consoles after X screws it up (see my original post). What I don't understand is why this repeat rate on the vc's is altered by starting X. Why should I have to reset it each time?
Back to top
View user's profile Send private message
splutz
n00b
n00b


Joined: 25 Feb 2006
Posts: 6

PostPosted: Sat Mar 04, 2006 1:10 pm    Post subject: Reply with quote

The solution was to comment the following line from the keyboard section of xorg.conf:

#Option "AutoRepeat" "500 5"

Keyboard rate in ttys is back to normal with X running.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum