| View previous topic :: View next topic |
| Author |
Message |
Deepline
n00b
Joined: 30 Jun 2005
Posts: 2
|
 Posted: Thu Jun 30, 2005 8:33 am Post subject: народ помогите с траблой!!!!! |
 |
|
немогу запустит lt_serial
все сделал по инфе:
emerge ltmodem
******
попросил 2 пакета:
ltmodem-2.6-alk-6.tar.bz2
ltmodem-8.31a10.tar.gz
написал что ништяк можно юзить
modprobe lt_modem стартует
modprobe lt_serial и все машина повисла (((
перезагрузился через reset,потому что ни одна кнопка не работала....
********пропущу строки загрузки*******
start pci hotplug ----и опять висим..
в файле *.autoload.module
lt_modem
#lt_serial
все тогда система стартует
народ что не так..?????подскажите!!!!!
kernel-2.6.11-gentoo-r3
И еще не могу сделать Grub так чтоб Windows XP грузился.Grub установлен на /dev/hda в MBR
у меня 2 винта SATA и ATA
=>/dev/hda -ATA
=>/dev/sda -SATA
на /dev/hda стоит Gentoo
/dev/hda1 /boot
/dev/hda6 /
/dev/hda5 swap
на /dev/sda WinXP
на разделе /dev/sda1 --сам win
на /dev/sda5 фильмы,музыка и др
вот сам Grub.conf:
default 0
timeout 30
splashimage=(hd0,0)/grub/splash.xpm.gz
title=Gentoo Linux 2.6.11-r3
root (hd0,0)
kernel /kernel-2.6.11-gentoo-r3 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda6
initrd /initrd-2.6.11-gentoo-r3
title=Windows XP
rootnoverify (hd1,0)
makeactive
chainloader +1
где я облажался..????
Все заранее спасиб...!!!!
distrib Gentoo x86 2005.0 |
|
| Back to top |
|
 |
4le
Tux's lil' helper
Joined: 17 Feb 2005
Posts: 96
Location: СПб
|
| Posted: Fri Jul 01, 2005 4:57 pm Post subject: |
|
|
Может оно, а может и нет.
Начиная с какой-то версии ядра (~2.6.10) мой люцент перестал коннектиться. В инете нашёл лекарство: что-то вроде pci-route как аргумент ядра в lilo.conf. Возможно, что тебе это поможет.
P.S.: лоадить надо именно лтсериал. Лтмодем он сам подгрузит. |
|
| Back to top |
|
|
Deepline
n00b
Joined: 30 Jun 2005
Posts: 2
|
| Posted: Fri Jul 01, 2005 8:03 pm Post subject: |
|
|
ne podskazhesh' kak eto voobshe dolzhno viglyadet'..????
i gde eto iskat'..???? |
|
| Back to top |
|
|
4le
Tux's lil' helper
Joined: 17 Feb 2005
Posts: 96
Location: СПб
|
| Posted: Mon Jul 04, 2005 12:17 pm Post subject: |
|
|
| Deepline wrote: | ne podskazhesh' kak eto voobshe dolzhno viglyadet'..????
i gde eto iskat'..???? |
Что-то вроде этого.
http://ubuntuforums.org/archive/index.php/t-21312.html
| Quote: |
SOLVED!
Just briefly, for anyone interested, this is what I did to get the Lucent winmodem up and running without recompiling drivers. I have condensed what I did here, drawing on different posts to these forums, the linmodems.org forums and the debian lists. Thanks to everyone!
1. make sure that you have the restricted-modules installed. This was done by default in the install of Kubuntu Hoary preview.
2. put lt_serial and lt_modem in /etc/modules in order to get the modules loaded on boot. The modem device will appear as /dev/ttLTM0 (that is a zero at the end).
3. since udev rewrites /dev on each boot, and since kppp doesn't like to use /dev/ttLTM0, you need to have a symlink created on boot (from /dev/ttLTM0 to /dev/modem is easiest, I think). To do this, create the file /etc/udev/rules.d/10-local.rules, and put these lines in it:
#ltmodem
KERNEL="ttLTM0", SYMLINK="modem"
4. since the 2.6.10 kernels have some problems with these modules, put the following in the grub boot commands (at the place where it will get updated!):
pci=routeirq
5. run grub-update to update grub
6. If you are going to use kppp, edit the file /etc/ppp/options and comment out the line that says "auth" (ie., make it "#auth").
7. reboot and configure your dial-up service, and it should be good to go!
Wonderful, wonderful Ubuntu and other Linux forums -- yet another reason to avoid closed source operating systems!
-- hogweed
|
Я так понимаю, тебе нужен четвёртый пункт. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Russian
