| View previous topic :: View next topic |
| Author |
Message |
bertaboy
l33t
Joined: 05 Nov 2004
Posts: 604
|
 Posted: Thu Nov 10, 2005 11:41 pm Post subject: Unbelievably slow USB write speeds |
 |
|
| I'm not quite sure what it is, I'm guessing it could be udev, maybe not, but when I plug my USB flash drive in, the write speed is terribly slow. I can read fine and at full speeds, but when I write, it takes forever. This is a USB1.1 drive, but it's going at slower speeds than floppy disks. Anyone experiencing anything similar, or have lately? |
|
| Back to top |
|
 |
i92guboj
Bodhisattva
Joined: 30 Nov 2004
Posts: 10315
Location: Córdoba (Spain)
|
| Posted: Thu Nov 10, 2005 11:51 pm Post subject: Re: Unbelievably slow USB write speeds |
|
|
| bertaboy wrote: | | I'm not quite sure what it is, I'm guessing it could be udev, maybe not, but when I plug my USB flash drive in, the write speed is terribly slow. I can read fine and at full speeds, but when I write, it takes forever. This is a USB1.1 drive, but it's going at slower speeds than floppy disks. Anyone experiencing anything similar, or have lately? |
Just random thought, but who knows... Give these a try:
1.- Filesystem, which fs are you using on that drive? Is the filesystem error free?
2.- USB drivers conflict. What driver do you have into your kernel? You might want to build only one of uhci/ohci, some times, when both are loaded, strange things happens. Also, if you drive is only 1.1 capable, try to unload the ehci module (or load it if it is unloaded) and see if one or another option makes any difference.
3.- Does the thing happens the same as root? |
|
| Back to top |
|
|
widan
Veteran
Joined: 07 Jun 2005
Posts: 1512
Location: Paris, France
|
| Posted: Fri Nov 11, 2005 12:22 am Post subject: Re: Unbelievably slow USB write speeds |
|
|
| bertaboy wrote: | | I can read fine and at full speeds, but when I write, it takes forever. |
Normal reads and really slow writes usually mean it's a FAT filesystem mounted sync... Run "mount /dev/sda -o async,remount" and see if it gets better (replace sda by the device your flash drive is on). If it helps, look at this thread for how to make it permanent. |
|
| Back to top |
|
|
paul555
l33t
Joined: 22 Nov 2004
Posts: 612
Location: Greece
|
| Posted: Fri Nov 11, 2005 10:14 am Post subject: |
|
|
I had a similar problem.Look here
_________________
"LINUX, MS-DOS, Windows : known as the Good, the Bad and the Ugly." 
http://www.gnome.gr |
|
| Back to top |
|
|
bertaboy
l33t
Joined: 05 Nov 2004
Posts: 604
|
| Posted: Fri Nov 11, 2005 6:50 pm Post subject: Re: Unbelievably slow USB write speeds |
|
|
| widan wrote: | | bertaboy wrote: | | I can read fine and at full speeds, but when I write, it takes forever. |
Normal reads and really slow writes usually mean it's a FAT filesystem mounted sync... Run "mount /dev/sda -o async,remount" and see if it gets better (replace sda by the device your flash drive is on). If it helps, look at this thread for how to make it permanent. |
Thanks, the temporary solution works, but unfortunately, I don't know how to apply the advice in the thread you listed. Rather than having /usr/share/hal/fdi/90defaultpolicy/storage-policy.fdi I have /usr/share/hal/fdi/policy/10osvendor/10-storage-policy.fdi
And here's my file:
| Code: | <?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<!-- Default policies merged onto computer root object -->
<device>
<match key="info.udi" string="/org/freedesktop/Hal/devices/computer">
<merge key="storage.policy.default.mount_root" type="string">/media</merge>
<merge key="storage.policy.default.use_managed_keyword" type="bool">true</merge>
<merge key="storage.policy.default.managed_keyword.primary" type="string">managed</merge>
<merge key="storage.policy.default.managed_keyword.secondary" type="string">kudzu</merge>
<merge key="storage.policy.default.mount_option.noauto" type="bool">true</merge>
<merge key="storage.policy.default.mount_option.pamconsole" type="bool">false</merge>
<merge key="storage.policy.default.mount_option.user" type="bool">true</merge>
<merge key="storage.policy.default.mount_option.exec" type="bool">true</merge>
</match>
</device>
<device>
<!-- Whitelist bus types of storage devices we care about -->
<match key="info.category" string="storage">
<match key="storage.bus" string="mmc">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
<match key="storage.bus" string="usb">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
<match key="storage.bus" string="ide">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
<match key="storage.bus" string="ieee1394">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
<match key="storage.bus" string="sata">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
<match key="storage.bus" string="platform">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
</match>
<!-- Also add SCSI optical drives -->
<match key="storage.bus" string="scsi">
<match key="storage.drive_type" string="cdrom">
<merge key="storage.policy.should_mount" type="bool">true</merge>
</match>
</match>
<!-- Handle drives with non-partitioned media -->
<match key="storage.no_partitions_hint" bool="true">
<!-- optical drives -->
<match key="storage.drive_type" string="cdrom">
<merge key="storage.policy.mount_filesystem" type="string">auto</merge>
<merge key="storage.policy.desired_mount_point" type="string">cdrom</merge>
<match key="storage.cdrom.cdr" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
<match key="storage.cdrom.cdrw" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
<match key="storage.cdrom.dvdplusr" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
<match key="storage.cdrom.dvdplusrw" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
<match key="storage.cdrom.dvdram" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
<match key="storage.cdrom.dvdr" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
<match key="storage.cdrom.dvdrw" bool="true">
<merge key="storage.policy.desired_mount_point" type="string">cdrecorder</merge>
</match>
</match>
<!-- floppy drives -->
<match key="storage.drive_type" string="floppy">
<merge key="storage.policy.mount_filesystem" type="string">auto</merge>
<merge key="storage.policy.desired_mount_point" type="string">floppy</merge>
</match>
<!-- zip drives -->
<match key="storage.drive_type" string="zip">
<merge key="storage.policy.mount_filesystem" type="string">auto</merge>
<merge key="storage.policy.desired_mount_point" type="string">zip</merge>
</match>
<!-- jaz drives -->
<match key="storage.drive_type" string="jaz">
<merge key="storage.policy.mount_filesystem" type="string">auto</merge>
<merge key="storage.policy.desired_mount_point" type="string">jaz</merge>
</match>
</match>
<!-- Normal volumes; use volume label, uuid or drive_type -->
<match key="block.is_volume" bool="true">
<match key="volume.fsusage" string="filesystem">
<!-- skip for drives with the no partitions hint (they are handled above) -->
<match key="@block.storage_device:storage.no_partitions_hint" bool="false">
<merge key="volume.policy.should_mount" type="bool">true</merge>
<merge key="volume.policy.mount_filesystem" type="copy_property">volume.fstype</merge>
<!-- Fallback is '<storage.bus>', appended with 'disk', e.g. usbdisk,
idedisk, scsidisk etc. -->
<merge key="volume.policy.desired_mount_point" type="copy_property">@block.storage_device:storage.bus</merge>
<append key="volume.policy.desired_mount_point" type="string">disk</append>
<!-- zip drives -->
<match key="@block.storage_device:storage.drive_type" string="zip">
<merge key="volume.policy.desired_mount_point" type="string">zip</merge>
</match>
<!-- Best: If available use filesystem label -->
<match key="volume.label" empty="false">
<!-- unless it's a path (e.g. /boot, /, /home etc) -->
<match key="volume.label" is_absolute_path="false">
<!-- and only if the label is ascii -->
<match key="volume.label" is_ascii="true">
<merge key="volume.policy.desired_mount_point" type="copy_property">volume.label</merge>
</match>
</match>
</match>
<!-- Should never mount Apple Bootstrap partitions (it would be
a security hole) - should use the bootable flag from the
Mac partition table instead -->
<match key="volume.fstype" string="hfs">
<match key="volume.label" string="bootstrap">
<merge key="volume.policy.should_mount" type="bool">false</merge>
</match>
</match>
<!-- Attempt mount point 'ipod' for iPod's -->
<match key="@block.storage_device:portable_audio_player.type" string="ipod">
<merge key="volume.policy.desired_mount_point" type="string">ipod</merge>
</match>
<!-- whitelist of partition table id's, if from a msdos partition table -->
<match key="volume.partition.msdos_part_table_type" exists="true">
<!-- Default to no mount and punch holes -->
<merge key="volume.policy.should_mount" type="bool">false</merge>
<!-- Linux -->
<match key="volume.partition.msdos_part_table_type" int="0x83">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- FAT12 -->
<match key="volume.partition.msdos_part_table_type" int="0x01">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- FAT16 <32M -->
<match key="volume.partition.msdos_part_table_type" int="0x04">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- FAT16 -->
<match key="volume.partition.msdos_part_table_type" int="0x06">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- HPFS/NTFS -->
<match key="volume.partition.msdos_part_table_type" int="0x07">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- W95 FAT32 -->
<match key="volume.partition.msdos_part_table_type" int="0x0b">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- W95 FAT32 (LBA) -->
<match key="volume.partition.msdos_part_table_type" int="0x0c">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
<!-- W95 FAT16 (LBA) -->
<match key="volume.partition.msdos_part_table_type" int="0x0e">
<merge key="volume.policy.should_mount" type="bool">true</merge>
</match>
</match>
</match>
</match>
</match>
</device>
<!-- Dont want to mount non-hotpluggable fixed disks since ideraid
detection isnt complete as hald wrongly detects e.g. partitions
from some IDE RAID controllers -->
<device>
<match key="storage.hotpluggable" bool="false">
<match key="storage.removable" bool="false">
<merge key="storage.policy.should_mount" type="bool">false</merge>
</match>
</match>
</device>
<device>
<match key="storage.media_check_enabled" bool="true">
<append key="info.addons" type="strlist">hald-addon-storage</append>
</match>
</device>
</deviceinfo>
|
|
|
| Back to top |
|
|
bertaboy
l33t
Joined: 05 Nov 2004
Posts: 604
|
| Posted: Mon Nov 14, 2005 10:09 pm Post subject: |
|
|
| anybody? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
