Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ошибк&
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Russian
View previous topic :: View next topic  
Author Message
zubator
Apprentice
Apprentice


Joined: 16 Sep 2004
Posts: 174
Location: Moscow

PostPosted: Tue May 03, 2005 4:53 pm    Post subject: ошибк& Reply with quote

тут у меня файловая система почему-то стала падать часто и я решил посмотреть логи ядра на наличие ошибок и вот что я увидел

May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana ide0: reset: success
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
May 3 20:30:06 Nirvana hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
May 3 20:30:06 Nirvana ide: failed opcode was: unknown
May 3 20:30:06 Nirvana ide0: reset: success

все это меня достаточно напрягает, не пойму что это за штука, как я понимаю это у меня жестком диске появились сбойные блоки?

Использую ядро 2.6.11-gentoo-r5

характеристики жесткого диска

ATA device, with non-removable media
Model Number: HTS548080M9AT00
Serial Number: MRL442L4GX48ZB
Firmware Revision: MG4OA53A
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 3a
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128 (0x80)
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 *udma0 udma1 udma2 udma3 udma4 udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* NOP cmd
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
* Automatic Acoustic Management feature set
SET MAX security extension
Address Offset Reserved Area Boot
* SET FEATURES subcommand required to spinup after power up
Power-Up In Standby feature set
* Advanced Power Management feature set
* General Purpose Logging feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
not supported: enhanced erase
52min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
Back to top
View user's profile Send private message
Zoltan
Guru
Guru


Joined: 27 Aug 2003
Posts: 394
Location: Moscow, Russia

PostPosted: Tue May 03, 2005 9:29 pm    Post subject: Reply with quote

Похоже что диск умирает. Чтобы в этом убедиться есть команда badblocks (sys-fs/e2fsprogs), для ее использования лучше всего отмонтировать диск целиком, то есть лучше всего загрузить что-то типа livecd или knoppix.
_________________
Light travels faster than sound. That's why some people appear bright before you hear them speak.
Back to top
View user's profile Send private message
rusxakep
Guru
Guru


Joined: 09 Jul 2004
Posts: 458
Location: Moscow, Russia

PostPosted: Wed May 04, 2005 9:18 am    Post subject: Reply with quote

У Хитачи дисков такое случается достаточно часто .....
Back to top
View user's profile Send private message
norguhtar
n00b
n00b


Joined: 17 May 2003
Posts: 46
Location: Russia

PostPosted: Wed May 04, 2005 10:14 am    Post subject: Reply with quote

2zubator: попробуй сменить шлейф. Дело может быть и не в винте.
Back to top
View user's profile Send private message
zubator
Apprentice
Apprentice


Joined: 16 Sep 2004
Posts: 174
Location: Moscow

PostPosted: Wed May 04, 2005 12:44 pm    Post subject: Reply with quote

:D tolko y menya notebook.....
Back to top
View user's profile Send private message
046
Apprentice
Apprentice


Joined: 21 Jul 2004
Posts: 231
Location: Yaroslavl, Russia

PostPosted: Mon May 09, 2005 8:57 am    Post subject: Reply with quote

Включи
Device Drivers->ATA/ATAPI/MFM/RLL->Include IDE/ATA-2 DISK support->Use multi-mode by default

Мне помогло.
Back to top
View user's profile Send private message
zubator
Apprentice
Apprentice


Joined: 16 Sep 2004
Posts: 174
Location: Moscow

PostPosted: Tue May 10, 2005 6:06 am    Post subject: Reply with quote

у меня это уже стояло, но сейчас вроде стало опять все нормально, все забэкапил, надо бы будет форматнуть его полностью заново
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Russian All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum