View previous topic :: View next topic |
Author |
Message |
flaifel n00b
Joined: 04 May 2005 Posts: 7
|
Posted: Wed May 04, 2005 10:38 am Post subject: Running Xserver over sparc ultra 60 |
|
|
Dears,
Finally i was able to install Gentoo-2.4.30 on sparc64 ultra 60 machine.
I referred to the provided document "http://www.gentoo.org/doc/en/handbook/handbook-sparc.xml" for this and it was really agood help. i did just till step 12 in Installing Gentoo [thus this is a basic installation for Gentoo]
Now ....
I want now to configure and run the Xserver.
I referred to the the document "http://www.gentoo.org/doc/en/xorg-config.xml"
i did :
# emerge xorg-x11
# env-update
# source /etc/profile
and all went ok
I tried the automatic generation for the /etc/X11/xorg.conf file using "Xorg -configure" and didnt work
then i tried the semi-automatic generation using xorgconfig and xorgcfg and also didnt work. most probably because i dont know enough information about the machine and i dont know how to extract these info, like mouse, keyboard, monitor, and video card.
can anyone help me in this please.
appreciate your help,
flaifel |
|
Back to top |
|
|
jbwillia Tux's lil' helper
Joined: 07 May 2004 Posts: 108 Location: TN, USA
|
Posted: Wed May 04, 2005 6:25 pm Post subject: |
|
|
I have an Ultra 60 that I used to run gentoo on (I actually need to install it again - it's currently dead and unplugged). Anyways, I'm posting my xorg.conf file from that time; keep in mind that mine was a dual head system so there are two video cards (creator3d) and two monitors. You'll also notice the server layout is setup to take advantage of xinerama; you can easily change that and take out the xinerama module to get it up and going single headed.
Code: | # Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
Section "Files"
FontPath "unix/localhost:-1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/freefont"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/ukr"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "DefaultServerLayout" "ServerLayout0"
Option "BlankTime" "30"
Option "StandbyTime" "40"
Option "SuspendTime" "50"
Option "OffTime" "60"
Option "Pixmap" "32"
Option "Xinerama" "true"
EndSection
Section "Module"
Load "dbe" # double buffering
Load "GLcore" # openGL support
Load "dri" # direct rendering infrastructure
Load "glx" # openGL X interface
Load "extmod" # misc required extensions
Load "record" # X event recorder
# the following two are only necessary if not running xfs
Load "freetype" # freetype font handler
Load "type1" # adobe type 1 font handler
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "type5"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Card0"
Driver "sunffb"
BusID "SBUS:fb0"
VendorName "Sun Microsystems"
BoardName "Sun|FFB2+ Vertical Creator 3d (ffb)"
EndSection
Section "Device"
Identifier "Card1"
Driver "sunffb"
BusID "SBUS:fb1"
VendorName "Sun Microsystems"
BoardName "Sun|FFB2+ Vertical Creator 3d (ffb)"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Dell Computer"
ModelName "P990"
HorizSync 30-96
VertRefresh 48-120
DisplaySize 368 273
Option "DPMS" "on"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Sun Microsystems"
ModelName "GDM-5410 (Sony)"
HorizSync 30-121
VertRefresh 48-160
DisplaySize 400 300
Option "DPMS" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1600x1200"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1600x1200"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "ServerLayout"
Identifier "ServerLayout0"
Screen "Screen0"
Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "HandleSpecialKeys" "Always"
EndSection
|
_________________
Code: | #!/bin/bash
for everyexe in $(find /home/you -name "*.exe" | egrep -i ".*exe$")
do
kill $(pgrep you)
done |
|
|
Back to top |
|
|
flaifel n00b
Joined: 04 May 2005 Posts: 7
|
Posted: Thu May 05, 2005 10:02 am Post subject: |
|
|
Thanks for your answer jbwillia,
sorry for sending this thread more that one time.
I customised the xorg.conf file you sent as i believe is for my system but still im having a problem in loading the card module driver.
here is the xorg.conf as i customised it:
Code: |
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
Section "Files"
FontPath "unix/localhost:-1"
FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/freefont"
# FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/share/fonts/Speedo"
# FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/util"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/ukr"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "DefaultServerLayout" "ServerLayout0"
Option "BlankTime" "30"
Option "StandbyTime" "40"
Option "SuspendTime" "50"
Option "OffTime" "60"
Option "Pixmap" "32"
# Option "Xinerama" "true"
EndSection
#Section "Module"
# Load "dbe" # double buffering
# Load "GLcore" # openGL support
# Load "dri" # direct rendering infrastructure
# Load "glx" # openGL X interface
# Load "extmod" # misc required extensions
# Load "record" # X event recorder
# the following two are only necessary if not running xfs
# Load "freetype" # freetype font handler
# Load "type1" # adobe type 1 font handler
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "type5"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Card0"
Driver "sunffb"
BusID "SBUS:fb0"
VendorName "Sun Microsystems"
BoardName "Sun|FFB2+ Vertical Creator 3d (ffb)"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Sun Microsystems"
ModelName "GDM-5410 (Sony)"
HorizSync 30-121
VertRefresh 48-160
DisplaySize 400 300
Option "DPMS" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1600x1200"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Section "ServerLayout"
Identifier "ServerLayout0"
Screen "Screen0"
# Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "HandleSpecialKeys" "Always"
EndSection
|
can you see any error here ?
this is what i get in the log file:
Code: |
root # more /var/log/Xorg.0.log
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.4.30-sparc sparc64 [ELF]
Current Operating System: Linux flaifel 2.4.30-sparc #2 SMP Mon May 2 18:17:47 GMT 2005 sparc64
Build Date: 04 May 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 5 12:47:51 2005
(==) Using config file: "/etc/X11/xorg.conf"
(**) Option "defaultserverlayout" "ServerLayout0"
(**) ServerLayout "ServerLayout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "unix/localhost:-1,/usr/share/fonts/TTF,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/misc,/usr/share/fonts/Type1,/usr/
share/fonts/util,/usr/share/fonts/local,/usr/share/fonts/cyrillic,/usr/share/fonts/ukr"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(**) Option "BlankTime" "30"
(**) Option "StandbyTime" "40"
(**) Option "SuspendTime" "50"
(**) Option "OffTime" "60"
(**) Option "Pixmap" "32"
(**) Option "HandleSpecialKeys" "Always"
(**) Always handling special keys in DDX
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 108e,8000 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 108e,1000 card 0000,0000 rev 01 class 06,80,00 hdr 80
(II) PCI: 00:01:1: chip 108e,1001 card 0000,0000 rev 01 class 02,00,00 hdr 80
(II) PCI: 00:03:0: chip 1000,000f card 0000,0000 rev 14 class 01,00,00 hdr 80
(II) PCI: 00:03:1: chip 1000,000f card 0000,0000 rev 14 class 01,00,00 hdr 80
(II) PCI: 01:00:0: chip 108e,8000 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 2 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 2 0x00000000 - 0x7fffffff (0x80000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 2 0x00000000 - 0x7fffffff (0x80000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 1: bridge is at (1:0:0), (1,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 1 0x00000000 - 0x7fffffff (0x80000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 1 0x00000000 - 0x7fffffff (0x80000000) MX[B]
(--) SBUS:(0xf006e274) Sun FFB2+ Vertical Creator 3D at /SUNW,ffb@1e,0
(II) Addressable bus resource ranges are
[0] -1 1 0x00000000 - 0x7fffffff (0x80000000) MX[B]
[1] -1 2 0x00000000 - 0x7fffffff (0x80000000) MX[B]
[2] -1 1 0x00000000 - 0x0000ffff (0x10000) IX[B]
[3] -1 2 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 1 0x7fffffff - 0x7fffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 2 0x7fffffff - 0x7fffffff (0x1) MX[B]
[5] -1 2 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 2 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 2 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[10] -1 2 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 2 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 2 0x00016000 - 0x00016fff (0x1000) MX[B]
[1] -1 2 0x00014000 - 0x000140ff (0x100) MX[B]
[2] -1 2 0x00012000 - 0x00012fff (0x1000) MX[B]
[3] -1 2 0x00010000 - 0x000100ff (0x100) MX[B]
[4] -1 2 0x00008000 - 0x0000ffff (0x8000) MX[B]
[5] -1 2 0x71000000 - 0x717fffff (0x800000) MX[B]
[6] -1 2 0x70000000 - 0x70ffffff (0x1000000) MX[B]
[7] -1 2 0x00000800 - 0x000008ff (0x100) IX[B]
[8] -1 2 0x00000400 - 0x000004ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 2 0x00016000 - 0x00016fff (0x1000) MX[B]
[1] -1 2 0x00014000 - 0x000140ff (0x100) MX[B]
[2] -1 2 0x00012000 - 0x00012fff (0x1000) MX[B]
[3] -1 2 0x00010000 - 0x000100ff (0x100) MX[B]
[4] -1 2 0x00008000 - 0x0000ffff (0x8000) MX[B]
[5] -1 2 0x71000000 - 0x717fffff (0x800000) MX[B]
[6] -1 2 0x70000000 - 0x70ffffff (0x1000000) MX[B]
[7] -1 2 0x00000800 - 0x000008ff (0x100) IX[B]
[8] -1 2 0x00000400 - 0x000004ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 1 0x7fffffff - 0x7fffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 2 0x7fffffff - 0x7fffffff (0x1) MX[B]
[5] -1 2 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 2 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 2 0x00000000 - 0x00007fff (0x8000) MX[B]
[8] -1 1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[10] -1 2 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 2 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 1 0x7fffffff - 0x7fffffff (0x1) MX[B]
[1] -1 1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 1 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 2 0x7fffffff - 0x7fffffff (0x1) MX[B]
[5] -1 2 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 2 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 2 0x00000000 - 0x00007fff (0x8000) MX[B]
[8] -1 2 0x00016000 - 0x00016fff (0x1000) MX[B]
[9] -1 2 0x00014000 - 0x000140ff (0x100) MX[B]
[10] -1 2 0x00012000 - 0x00012fff (0x1000) MX[B]
[11] -1 2 0x00010000 - 0x000100ff (0x100) MX[B]
[12] -1 2 0x00008000 - 0x0000ffff (0x8000) MX[B]
[13] -1 2 0x71000000 - 0x717fffff (0x800000) MX[B]
[14] -1 2 0x70000000 - 0x70ffffff (0x1000000) MX[B]
[15] -1 1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 1 0x00000000 - 0x00000000 (0x1) IX[B]
[17] -1 2 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 2 0x00000000 - 0x00000000 (0x1) IX[B]
[19] -1 2 0x00000800 - 0x000008ff (0x100) IX[B]
[20] -1 2 0x00000400 - 0x000004ff (0x100) IX[B]
(II) LoadModule: "sunffb"
(II) Loading /usr/lib/modules/drivers/sunffb_drv.so
dlopen: /usr/lib/modules/drivers/sunffb_drv.so: undefined symbol: cfbCopyPlane8to1
(EE) Failed to load /usr/lib/modules/drivers/sunffb_drv.so
(II) UnloadModule: "sunffb"
(EE) Failed to load module "sunffb" (loader failed, 7)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.X.Org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
|
as u can see there is error in loading card driver and also i think error for the keyboard driver, right?
what do you think ?
regards,
Flaifel |
|
Back to top |
|
|
Ferris Retired Dev
Joined: 13 Jan 2003 Posts: 426 Location: N. Virginia (USA)
|
Posted: Thu May 05, 2005 12:03 pm Post subject: |
|
|
You are not loading any modules at all (module section is all comments). At the least, you need:
Code: |
Load "cfb"
Load "cfb32"
|
Or, there is a working xorg.conf for U60+Creator at http://dev.gentoo.org/~fmccor/docs/xorg/xorg.conf/xorg.conf.html (and at other places, too, if you don't like that one.)
Hope this helps,
Regards. |
|
Back to top |
|
|
flaifel n00b
Joined: 04 May 2005 Posts: 7
|
Posted: Thu May 05, 2005 1:41 pm Post subject: |
|
|
thanks,
now I see the display and twm
but now i still have a problem with the mouse and keyboard, both are not working !!!
how can i know the path for mouse device or keyboad module ...
im using also sun mouse and keyboard (the one where the mouse is plugged to the keyboard) |
|
Back to top |
|
|
flaifel n00b
Joined: 04 May 2005 Posts: 7
|
Posted: Thu May 05, 2005 4:04 pm Post subject: |
|
|
its ok
now all works well ..
it seems i was mixing between different xorg.conf files i found on the net
thanks all for your help
flaifel |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|