yuzan
n00b
Joined: 15 Apr 2004
Posts: 4
|
 Posted: Tue Apr 19, 2005 5:01 am Post subject: Experimental tftpboot images issue on SunFire v240 |
 |
|
Hi
I try use the new Experimental tftpboot images on my SunFire V240.
Most look is fine,except the memory size wrong.
My SunFire v240 have 1024M*8 = 8GB memory.
But only can be detect 7434432k.
Below is dmesg messages.
| Code: |
gentoo / # dmesg
PROMLIB: Sun IEEE Boot Prom 4.16.2 2004/10/04 18:22
Linux version 2.4.30 (root@titan) (gcc version 3.3.5 (Gentoo Linux 3.3.5)) #1 Wed Apr 13 18:48:24 MDT 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:ad:14:7b
On node 0 totalpages: 1047588
zone(0): 10092419 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f0065270,mid=0)
Found CPU 1 (node=f0065af0,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line:
Calibrating delay loop... 999.42 BogoMIPS
Memory: [color=red]7434432k[/color] available (2248k kernel code, 544k data, 160k init) [fffff80000000000,000000133ff06000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 262144 (order: 9, 4194304 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 524288 (order: 9, 4194304 bytes)
Page-cache hash table entries: 524288 (order: 9, 4194304 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
TOMATILLO0 PBMB: ver[4:0], portid 1f, cregs[4000fc00000] pregs[4000ff00000]
TOMATILLO0 PBMB: PCI CFG[7f600000000] IO[7f601000000] MEM[7f700000000]
TOMATILLO0 PBMA: ver[4:0], portid 1e, cregs[4000f400000] pregs[4000f600000]
TOMATILLO0 PBMA: PCI CFG[7fe00000000] IO[7fe01000000] MEM[7ff00000000]
TOMATILLO1 PBMA: ver[4:0], portid 1c, cregs[4000e400000] pregs[4000e600000]
TOMATILLO1 PBMA: PCI CFG[7ce00000000] IO[7ce01000000] MEM[7cf00000000]
TOMATILLO1 PBMB: ver[4:0], portid 1d, cregs[4000ec00000] pregs[4000ef00000]
TOMATILLO1 PBMB: PCI CFG[7c600000000] IO[7c601000000] MEM[7c700000000]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[1d]
PCI1(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[29]
PCI-IRQ: Routing bus[ 1] slot[ 2] map[0] to INO[28]
PCI1(PBMA): Bus running at 66MHz
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[08]
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[09]
PCI0(PBMB): Bus running at 66MHz
PCI-IRQ: Routing bus[ 3] slot[ a] map[0] to INO[27]
PCI-IRQ: Routing bus[ 3] slot[ d] map[0] to INO[18]
PCI0(PBMA): Bus running at 33MHz
isa0: [flashprom] [rtc] [i2c -> (i2c-bridge) (i2c-bridge) (motherboard-fru-prom) (chassis-fru-prom) (power-supply-fru-prom) (power-supply-fru-prom) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (rscrtc) (nvram) (idprom) (gpio) (gpio) (gpio) (gpio) (gpio) (gpio)] [power] [serial] [serial] [rmc-comm]
ebus: No EBus's found.
PCIO serial driver version 1.54
su(serial) at 0x7fe010003f8 (tty 0 irq 4,7ac) is a 16550A
su(serial) at 0x7fe010002e8 (tty 1 irq 4,7ac) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
tg3.c:v3.25 (March 24, 2005)
eth0: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:ad:14:7d
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth1: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:ad:14:7e
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth2: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:ad:14:7b
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
eth3: Tigon3 [partno(Sun 570X) rev 2003 PHY(5704)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:03:ba:ad:14:7c
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0]
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 03:0d.0
ALI15X3: chipset revision 196
ALI15X3: 100% native mode on irq 4,798
ide0: BM-DMA at 0x7fe01000920-0x7fe01000927, BIOS settings: hda:pio, hdb:pio
ALI15X3: simplex device: DMA forced
ide1: BM-DMA at 0x7fe01000928-0x7fe0100092f, BIOS settings: hdc:DMA, hdd:DMA
hda: CD-224E, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x7fe01000900-0x7fe01000907,0x7fe0100091a on irq 4,798
hda: attached ide-cdrom driver.
hda: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
sym.1.2.0: setting PCI_COMMAND_INVALIDATE.
sym.1.2.1: setting PCI_COMMAND_INVALIDATE.
sym0: <1010-66> rev 0x1 on pci bus 1 device 2 function 0 irq 4,729
sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: SCSI BUS has been reset.
sym1: <1010-66> rev 0x1 on pci bus 1 device 2 function 1 irq 4,728
sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
scsi1 : sym-2.1.17a
Vendor: FUJITSU Model: MAP3735N SUN72G Rev: 0401
Type: Direct-Access ANSI SCSI revision: 04
Vendor: FUJITSU Model: MAP3735N SUN72G Rev: 0401
Type: Direct-Access ANSI SCSI revision: 04
sym0:0:0: tagged command queuing enabled, command queue depth 16.
sym0:1:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
sym0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p7
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 18:52:10 Apr 13 2005
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0x7ff01000000, IRQ 10,7a7
host/usb-ohci.c: usb-03:0a.0, PCI device 10b9:5237
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 131072 buckets, 1024Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1570k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
sys32_ioctl(busybox:103): Unknown cmd fd(5) cmd(40081272) arg(effff8a0)
sys32_ioctl(busybox:103): Unknown cmd fd(6) cmd(40081272) arg(effff8a0)
tg3: eth2: Link is up at 100 Mbps, full duplex.
tg3: eth2: Flow control is on for TX and on for RX.
|
|
|
Gentoo on Sparc
