Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Непонятные траблы со звуком
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Russian
View previous topic :: View next topic  
Author Message
shannon70
n00b
n00b


Joined: 21 Mar 2005
Posts: 10

PostPosted: Fri Mar 25, 2005 7:30 am    Post subject: Непонятные траблы со звуком Reply with quote

Добрый день господа.
Помогите пожалуйста кто сможет,никак не могу решить проблемы со звуком:
Стоит Gentoo 2004.3,ядро 2.6.11-gentoo-r4,материнка Intel на 815 чипсете,звук 0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801BA/BAM AC'97 Audio (rev 11).Все делал как описано в доках и на форуме,в ядре отключил OSS,
ALSA,sound card support подключил модулем,прописал в маке.conf ALSA_CARDS="intel8x0",установил alsa-driver,в
/etc/modules.d/alsa прописал alias snd-card-0 snd-intel8x0 ,modules-update,cделал unmute каналов,rc-update add alsasound boot,/etc/init.d/alsasound start но звука нет,не знаю что и делать ,буду благодарен за любую помощь
Back to top
View user's profile Send private message
FDK
n00b
n00b


Joined: 23 Mar 2005
Posts: 60
Location: ru

PostPosted: Fri Mar 25, 2005 8:59 am    Post subject: Reply with quote

dmesg ?
Back to top
View user's profile Send private message
shannon70
n00b
n00b


Joined: 21 Mar 2005
Posts: 10

PostPosted: Fri Mar 25, 2005 10:04 am    Post subject: Reply with quote

Mar 25 11:45:38 Shannon syslog-ng[6116]: syslog-ng version 1.6.5 starting
Mar 25 11:45:38 Shannon syslog-ng[6116]: Changing permissions on special file /dev/tty12
Mar 25 11:45:38 Shannon Linux version 2.6.11-gentoo-r4 (root@Shannon) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #6 SMP Thu Mar 24 19:17:05 EET 2005
Mar 25 11:45:38 Shannon BIOS-provided physical RAM map:
Mar 25 11:45:38 Shannon BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 25 11:45:38 Shannon BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 25 11:45:38 Shannon BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Mar 25 11:45:38 Shannon BIOS-e820: 0000000000100000 - 000000000ffc0000 (usable)
Mar 25 11:45:38 Shannon BIOS-e820: 000000000ffc0000 - 000000000fff8000 (ACPI data)
Mar 25 11:45:38 Shannon BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
Mar 25 11:45:38 Shannon BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
Mar 25 11:45:38 Shannon BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Mar 25 11:45:38 Shannon 255MB LOWMEM available.
Mar 25 11:45:38 Shannon On node 0 totalpages: 65472
Mar 25 11:45:38 Shannon DMA zone: 4096 pages, LIFO batch:1
Mar 25 11:45:38 Shannon Normal zone: 61376 pages, LIFO batch:14
Mar 25 11:45:38 Shannon HighMem zone: 0 pages, LIFO batch:1
Mar 25 11:45:38 Shannon DMI 2.3 present.
Mar 25 11:45:38 Shannon ACPI: RSDP (v000 AMI ) @ 0x000ff980
Mar 25 11:45:38 Shannon ACPI: RSDT (v001 D815EA D815EPFV 0x20010918 MSFT 0x00001011) @ 0x0fff0000
Mar 25 11:45:38 Shannon ACPI: FADT (v001 D815EA EA81510A 0x20010918 MSFT 0x00001011) @ 0x0fff1000
Mar 25 11:45:38 Shannon ACPI: MADT (v001 D815EA EA81510A 0x20010918 MSFT 0x00001011) @ 0x0ffe30e4
Mar 25 11:45:38 Shannon ACPI: DSDT (v001 D815E2 EA81520A 0x00000023 MSFT 0x0100000b) @ 0x00000000
Mar 25 11:45:38 Shannon ACPI: Local APIC address 0xfee00000
Mar 25 11:45:38 Shannon ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar 25 11:45:38 Shannon Processor #0 6:11 APIC version 17
Mar 25 11:45:38 Shannon ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Mar 25 11:45:38 Shannon IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Mar 25 11:45:38 Shannon ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 25 11:45:38 Shannon ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 25 11:45:38 Shannon ACPI: IRQ0 used by override.
Mar 25 11:45:38 Shannon ACPI: IRQ2 used by override.
Mar 25 11:45:38 Shannon ACPI: IRQ9 used by override.
Mar 25 11:45:38 Shannon Enabling APIC mode: Flat. Using 1 I/O APICs
Mar 25 11:45:38 Shannon Using ACPI (MADT) for SMP configuration information
Mar 25 11:45:38 Shannon Allocating PCI resources starting at 10000000 (gap: 10000000:efb80000)
Mar 25 11:45:38 Shannon Built 1 zonelists
Mar 25 11:45:38 Shannon Kernel command line: root=/dev/hda4
Mar 25 11:45:38 Shannon mapped APIC to ffffd000 (fee00000)
Mar 25 11:45:38 Shannon mapped IOAPIC to ffffc000 (fec00000)
Mar 25 11:45:38 Shannon Initializing CPU#0
Mar 25 11:45:38 Shannon CPU 0 irqstacks, hard=c05b4000 soft=c05ac000
Mar 25 11:45:38 Shannon PID hash table entries: 1024 (order: 10, 16384 bytes)
Mar 25 11:45:38 Shannon Detected 996.555 MHz processor.
Mar 25 11:45:38 Shannon Using tsc for high-res timesource
Mar 25 11:45:38 Shannon Console: colour VGA+ 80x25
Mar 25 11:45:38 Shannon Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar 25 11:45:38 Shannon Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 25 11:45:38 Shannon Memory: 253592k/261888k available (3422k kernel code, 7784k reserved, 1118k data, 216k init, 0k highmem)
Mar 25 11:45:38 Shannon Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar 25 11:45:38 Shannon Calibrating delay loop... 1966.08 BogoMIPS (lpj=983040)
Mar 25 11:45:38 Shannon Security Framework v1.0.0 initialized
Mar 25 11:45:38 Shannon SELinux: Initializing.
Mar 25 11:45:38 Shannon SELinux: Starting in permissive mode
Mar 25 11:45:38 Shannon Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Mar 25 11:45:38 Shannon CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 25 11:45:38 Shannon CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
Mar 25 11:45:38 Shannon CPU: L1 I cache: 16K, L1 D cache: 16K
Mar 25 11:45:38 Shannon CPU: L2 cache: 256K
Mar 25 11:45:38 Shannon CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Mar 25 11:45:38 Shannon Intel machine check architecture supported.
Mar 25 11:45:38 Shannon Intel machine check reporting enabled on CPU#0.
Mar 25 11:45:38 Shannon Enabling fast FPU save and restore... done.
Mar 25 11:45:38 Shannon Enabling unmasked SIMD FPU exception support... done.
Mar 25 11:45:38 Shannon Checking 'hlt' instruction... OK.
Mar 25 11:45:38 Shannon CPU0: Intel(R) Celeron(TM) CPU 1000MHz stepping 01
Mar 25 11:45:38 Shannon per-CPU timeslice cutoff: 731.68 usecs.
Mar 25 11:45:38 Shannon task migration cache decay timeout: 1 msecs.
Mar 25 11:45:38 Shannon Total of 1 processors activated (1966.08 BogoMIPS).
Mar 25 11:45:38 Shannon ENABLING IO-APIC IRQs
Mar 25 11:45:38 Shannon ..TIMER: vector=0x31 pin1=2 pin2=-1
Mar 25 11:45:38 Shannon Brought up 1 CPUs
Mar 25 11:45:38 Shannon CPU0 attaching sched-domain:
Mar 25 11:45:38 Shannon domain 0: span 01
Mar 25 11:45:38 Shannon groups: 01
Mar 25 11:45:38 Shannon domain 1: span 01
Mar 25 11:45:38 Shannon groups: 01
Mar 25 11:45:38 Shannon NET: Registered protocol family 16
Mar 25 11:45:38 Shannon PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
Mar 25 11:45:38 Shannon PCI: Using configuration type 1
Mar 25 11:45:38 Shannon mtrr: v2.0 (20020519)
Mar 25 11:45:38 Shannon ACPI: Subsystem revision 20050211
Mar 25 11:45:38 Shannon ACPI: Interpreter enabled
Mar 25 11:45:38 Shannon ACPI: Using IOAPIC for interrupt routing
Mar 25 11:45:38 Shannon ACPI: PCI Root Bridge [PCI0] (00:00)
Mar 25 11:45:38 Shannon PCI: Probing PCI hardware (bus 00)
Mar 25 11:45:38 Shannon PCI: Transparent bridge - 0000:00:1e.0
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Mar 25 11:45:38 Shannon ACPI: Power Resource [FDDP] (off)
Mar 25 11:45:38 Shannon ACPI: Power Resource [URP1] (off)
Mar 25 11:45:38 Shannon ACPI: Power Resource [URP2] (off)
Mar 25 11:45:38 Shannon ACPI: Power Resource [LPTP] (off)
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12)
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Mar 25 11:45:38 Shannon ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12)
Mar 25 11:45:38 Shannon Linux Plug and Play Support v0.97 (c) Adam Belay
Mar 25 11:45:38 Shannon pnp: PnP ACPI init
Mar 25 11:45:38 Shannon pnp: PnP ACPI: found 11 devices
Mar 25 11:45:38 Shannon SCSI subsystem initialized
Mar 25 11:45:38 Shannon usbcore: registered new driver usbfs
Mar 25 11:45:38 Shannon usbcore: registered new driver hub
Mar 25 11:45:38 Shannon PCI: Using ACPI for IRQ routing
Mar 25 11:45:38 Shannon ** PCI interrupts are no longer routed automatically. If this
Mar 25 11:45:38 Shannon ** causes a device to stop working, it is probably because the
Mar 25 11:45:38 Shannon ** driver failed to call pci_enable_device(). As a temporary
Mar 25 11:45:38 Shannon ** workaround, the "pci=routeirq" argument restores the old
Mar 25 11:45:38 Shannon ** behavior. If this argument makes the device work again,
Mar 25 11:45:38 Shannon ** please email the output of "lspci" to bjorn.helgaas@hp.com
Mar 25 11:45:38 Shannon ** so I can fix the driver.
Mar 25 11:45:38 Shannon Machine check exception polling timer started.
Mar 25 11:45:38 Shannon audit: initializing netlink socket (disabled)
Mar 25 11:45:38 Shannon audit(1111743912.714:0): initialized
Mar 25 11:45:38 Shannon inotify device minor=63
Mar 25 11:45:38 Shannon devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Mar 25 11:45:38 Shannon devfs: boot_options: 0x1
Mar 25 11:45:38 Shannon Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Mar 25 11:45:38 Shannon SGI XFS with large block numbers, no debug enabled
Mar 25 11:45:38 Shannon Initializing Cryptographic API
Mar 25 11:45:38 Shannon lp: driver loaded but no devices found
Mar 25 11:45:38 Shannon Linux agpgart interface v0.100 (c) Dave Jones
Mar 25 11:45:38 Shannon agpgart: Detected an Intel i815 Chipset.
Mar 25 11:45:38 Shannon agpgart: Maximum main memory to use for agp memory: 203M
Mar 25 11:45:38 Shannon agpgart: AGP aperture is 64M @ 0xf8000000
Mar 25 11:45:38 Shannon [drm] Initialized drm 1.0.0 20040925
Mar 25 11:45:38 Shannon ACPI: Power Button (FF) [PWRF]
Mar 25 11:45:38 Shannon serio: i8042 AUX port at 0x60,0x64 irq 12
Mar 25 11:45:38 Shannon serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 25 11:45:38 Shannon Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Mar 25 11:45:38 Shannon ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 25 11:45:38 Shannon ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 25 11:45:38 Shannon mice: PS/2 mouse device common for all mice
Mar 25 11:45:38 Shannon input: AT Translated Set 2 keyboard on isa0060/serio0
Mar 25 11:45:38 Shannon input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Mar 25 11:45:38 Shannon parport: PnPBIOS parport detected.
Mar 25 11:45:38 Shannon parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
Mar 25 11:45:38 Shannon lp0: using parport0 (interrupt-driven).
Mar 25 11:45:38 Shannon io scheduler noop registered
Mar 25 11:45:38 Shannon io scheduler anticipatory registered
Mar 25 11:45:38 Shannon io scheduler deadline registered
Mar 25 11:45:38 Shannon io scheduler cfq registered
Mar 25 11:45:38 Shannon Floppy drive(s): fd0 is 1.44M
Mar 25 11:45:38 Shannon FDC 0 is a post-1991 82077
Mar 25 11:45:38 Shannon e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
Mar 25 11:45:38 Shannon e100: Copyright(c) 1999-2004 Intel Corporation
Mar 25 11:45:38 Shannon ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 20
Mar 25 11:45:38 Shannon e100: eth0: e100_probe: addr 0xff8ff000, irq 20, MAC addr 00:03:47:D4:90:41
Mar 25 11:45:38 Shannon PPP generic driver version 2.4.2
Mar 25 11:45:38 Shannon NET: Registered protocol family 24
Mar 25 11:45:38 Shannon tun: Universal TUN/TAP device driver, 1.6
Mar 25 11:45:38 Shannon tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Mar 25 11:45:38 Shannon netconsole: not configured, aborting
Mar 25 11:45:38 Shannon Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Mar 25 11:45:38 Shannon ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 25 11:45:38 Shannon ICH2: IDE controller at PCI slot 0000:00:1f.1
Mar 25 11:45:38 Shannon ICH2: chipset revision 17
Mar 25 11:45:38 Shannon ICH2: not 100% native mode: will probe irqs later
Mar 25 11:45:38 Shannon ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Mar 25 11:45:38 Shannon ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Mar 25 11:45:38 Shannon Probing IDE interface ide0...
Mar 25 11:45:38 Shannon hda: SAMSUNG SV4002H, ATA DISK drive
Mar 25 11:45:38 Shannon ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 25 11:45:38 Shannon Probing IDE interface ide1...
Mar 25 11:45:38 Shannon hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
Mar 25 11:45:38 Shannon ide1 at 0x170-0x177,0x376 on irq 15
Mar 25 11:45:38 Shannon Probing IDE interface ide2...
Mar 25 11:45:38 Shannon Probing IDE interface ide3...
Mar 25 11:45:38 Shannon Probing IDE interface ide4...
Mar 25 11:45:38 Shannon Probing IDE interface ide5...
Mar 25 11:45:38 Shannon hda: max request size: 128KiB
Mar 25 11:45:38 Shannon hda: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=65535/16/63, UDMA(100)
Mar 25 11:45:38 Shannon hda: cache flushes supported
Mar 25 11:45:38 Shannon /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
Mar 25 11:45:38 Shannon hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Mar 25 11:45:38 Shannon Uniform CD-ROM driver Revision: 3.20
Mar 25 11:45:38 Shannon libata version 1.10 loaded.
Mar 25 11:45:38 Shannon USB Universal Host Controller Interface driver v2.2
Mar 25 11:45:38 Shannon ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
Mar 25 11:45:38 Shannon uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
Mar 25 11:45:38 Shannon PCI: Setting latency timer of device 0000:00:1f.2 to 64
Mar 25 11:45:38 Shannon uhci_hcd 0000:00:1f.2: irq 19, io base 0xef40
Mar 25 11:45:38 Shannon uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
Mar 25 11:45:38 Shannon hub 1-0:1.0: USB hub found
Mar 25 11:45:38 Shannon hub 1-0:1.0: 2 ports detected
Mar 25 11:45:38 Shannon ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
Mar 25 11:45:38 Shannon uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
Mar 25 11:45:38 Shannon PCI: Setting latency timer of device 0000:00:1f.4 to 64
Mar 25 11:45:38 Shannon uhci_hcd 0000:00:1f.4: irq 23, io base 0xef80
Mar 25 11:45:38 Shannon uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
Mar 25 11:45:38 Shannon hub 2-0:1.0: USB hub found
Mar 25 11:45:38 Shannon hub 2-0:1.0: 2 ports detected
Mar 25 11:45:38 Shannon usbcore: registered new driver usblp
Mar 25 11:45:38 Shannon drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Mar 25 11:45:38 Shannon Initializing USB Mass Storage driver...
Mar 25 11:45:38 Shannon usb 2-2: new full speed USB device using uhci_hcd and address 2
Mar 25 11:45:38 Shannon hub 2-2:1.0: USB hub found
Mar 25 11:45:38 Shannon hub 2-2:1.0: 4 ports detected
Mar 25 11:45:38 Shannon usbcore: registered new driver usb-storage
Mar 25 11:45:38 Shannon USB Mass Storage support registered.
Mar 25 11:45:38 Shannon usbcore: registered new driver usbhid
Mar 25 11:45:38 Shannon drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Mar 25 11:45:38 Shannon oprofile: using NMI interrupt.
Mar 25 11:45:38 Shannon NET: Registered protocol family 2
Mar 25 11:45:38 Shannon IP: routing cache hash table of 1024 buckets, 16Kbytes
Mar 25 11:45:38 Shannon TCP established hash table entries: 16384 (order: 6, 262144 bytes)
Mar 25 11:45:38 Shannon TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
Mar 25 11:45:38 Shannon TCP: Hash tables configured (established 16384 bind 16384)
Mar 25 11:45:38 Shannon ip_conntrack version 2.1 (2046 buckets, 16368 max) - 220 bytes per conntrack
Mar 25 11:45:38 Shannon ip_tables: (C) 2000-2002 Netfilter core team
Mar 25 11:45:38 Shannon ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Mar 25 11:45:38 Shannon arp_tables: (C) 2002 David S. Miller
Mar 25 11:45:38 Shannon NET: Registered protocol family 1
Mar 25 11:45:38 Shannon NET: Registered protocol family 17
Mar 25 11:45:38 Shannon ACPI wakeup devices:
Mar 25 11:45:38 Shannon PBTN PCI1 UAR1 USB USB2 AC9 SMB
Mar 25 11:45:38 Shannon ACPI: (supports S0 S1 S4 S5)
Mar 25 11:45:38 Shannon ReiserFS: hda4: found reiserfs format "3.6" with standard journal
Mar 25 11:45:38 Shannon ReiserFS: hda4: using ordered data mode
Mar 25 11:45:38 Shannon ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024,max batch 900, max commit age 30, max trans age 30
Mar 25 11:45:38 Shannon ReiserFS: hda4: checking transaction log (hda4)
Mar 25 11:45:38 Shannon ReiserFS: hda4: Using r5 hash to sort names
Mar 25 11:45:38 Shannon VFS: Mounted root (reiserfs filesystem) readonly.
Mar 25 11:45:38 Shannon Mounted devfs on /dev
Mar 25 11:45:38 Shannon Freeing unused kernel memory: 216k freed
Mar 25 11:45:38 Shannon Adding 522104k swap on /dev/hda3. Priority:-1 extents:1
Mar 25 11:45:38 Shannon kjournald starting. Commit interval 5 seconds
Mar 25 11:45:38 Shannon EXT3 FS on hda2, internal journal
Mar 25 11:45:38 Shannon EXT3-fs: mounted filesystem with ordered data mode.
Mar 25 11:45:38 Shannon ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
Mar 25 11:45:38 Shannon PCI: Setting latency timer of device 0000:00:1f.5 to 64
Mar 25 11:45:38 Shannon intel8x0_measure_ac97_clock: measured 50011 usecs
Mar 25 11:45:38 Shannon intel8x0: clocking to 41152
Mar 25 11:45:39 Shannon e100: eth0: e100_watchdog: link up, 100Mbps, half-duplex
Mar 25 11:45:39 Shannon init: Activating demand-procedures for 'A'
Mar 25 11:45:52 Shannon kdm_greet[6403]: Can't open default user face
Mar 25 11:45:57 Shannon kde(pam_unix)[6392]: session opened for user root by (uid=0)
Back to top
View user's profile Send private message
fank
l33t
l33t


Joined: 16 Oct 2004
Posts: 794
Location: Minsk, Belarus

PostPosted: Sun Mar 27, 2005 9:16 am    Post subject: Reply with quote

у меня 8RDA3+
поставил nitro2 и получил неработающий звук, не загружается модуль
похоже, в 11-х ядрах засада для модуля i8x0, потому как кучу сообщений подобного рода уже успел прочитать
ошибка у меня такая:
Code:
/etc/init.d/alsasound restart
 * WARNING:  you are stopping a boot service.
 * ALSA is not loaded
 * Loading ALSA modules ...
 *   Loading: snd-card-0 ...
WARNING: Error inserting snd (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd.ko): Unknown symbol i
n module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd-timer.ko): Unkn
own symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd-pcm.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_ac97_codec (/lib/modules/2.6.11-nitro2/alsa-driver/pci/ac97/snd-ac97-co
dec.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_intel8x0 (/lib/modules/2.6.11-nitro2/alsa-driver/pci/snd-intel8x0.ko): Un
known symbol in module, or unknown parameter (see dmesg)                                      [ !! ]
 *   Loading: snd-seq-oss ...
WARNING: Error inserting snd (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd.ko): Unknown symbol i
n module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.11-nitro2/alsa-driver/acore/seq/snd-seq-de
vice.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd-timer.ko): Unkn
own symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq (/lib/modules/2.6.11-nitro2/alsa-driver/acore/seq/snd-seq.ko): Unkn
own symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_midi_event (/lib/modules/2.6.11-nitro2/alsa-driver/acore/seq/snd-se
q-midi-event.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq_oss (/lib/modules/2.6.11-nitro2/alsa-driver/acore/seq/oss/snd-seq-oss
.ko): Unknown symbol in module, or unknown parameter (see dmesg)                              [ !! ]
 *   Loading: snd-pcm-oss ...
WARNING: Error inserting snd (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd.ko): Unknown symbol i
n module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mixer_oss (/lib/modules/2.6.11-nitro2/alsa-driver/acore/oss/snd-mixer-o
ss.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd-timer.ko): Unkn
own symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_pcm (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd-pcm.ko): Unknown
symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm_oss (/lib/modules/2.6.11-nitro2/alsa-driver/acore/oss/snd-pcm-oss.ko)
: Unknown symbol in module, or unknown parameter (see dmesg)                                  [ !! ]
 *   Loading: snd-mixer-oss ...
WARNING: Error inserting snd (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd.ko): Unknown symbol i
n module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_mixer_oss (/lib/modules/2.6.11-nitro2/alsa-driver/acore/oss/snd-mixer-oss
.ko): Unknown symbol in module, or unknown parameter (see dmesg)                              [ !! ]
 *   Loading: snd-seq ...
WARNING: Error inserting snd (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd.ko): Unknown symbol i
n module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.11-nitro2/alsa-driver/acore/seq/snd-seq-de
vice.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.11-nitro2/alsa-driver/acore/snd-timer.ko): Unkn
own symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_seq (/lib/modules/2.6.11-nitro2/alsa-driver/acore/seq/snd-seq.ko): Unknow
n symbol in module, or unknown parameter (see dmesg)                                          [ !! ]
 * ERROR: Failed to load necessary drivers                                                    [ ok ]
 * Restoring Mixer Levels ...
cat: /proc/asound/cards: No such file or directory                                            [ ok ]


чё бум делать?

Добавлено:
а делать бум вот что - ставить nforce-audio, забывать про альсу и ждать решения траблы (или не ждать)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Russian All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum