Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Gentoo non mi si spegne...
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page Previous  1, 2  
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian)
View previous topic :: View next topic  
Author Message
pava_rulez
Guru
Guru


Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe

PostPosted: Fri Mar 18, 2005 7:44 pm    Post subject: Reply with quote

randomaze wrote:
pava_rulez wrote:
CODE: 7a b2 e6 e9 75 fa ff ff e8 e4 7a b2 ...
/SBIN/RC: line 123: 18693 segmentation fault umount ${x}>&/dev/null

INIT:NO MORE PROCESS LEFT IN THIS RUNLEVEL


E poi si blocca su sta schermata. Aiuto!!!!!!


Niente panico :-P

Potresti postare il tuo fstab?
...e magari anche l'output del comando 'mount' poco prima di dare l'halt



Se può essere uitle..: dmesg
Linux version 2.6.9-gentoo-r1 (root@livecd) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2,pie-8.7.6)) #1 Sun Feb 27 03:27:45 GMT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000018000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
384MB LOWMEM available.
On node 0 totalpages: 98304
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 94208 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: Unable to locate RSDP
Built 1 zonelists
Kernel command line: BOOT_IMAGE=gentoo ro root=100 init=/linuxrc ramdisk=8192 real_root=/dev/hda8
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 900.328 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Oct 20 14:26:13 EDT 2004 : initialized
Speakup: loading module "speakup_n"
request_module: runaway loop modprobe speakup_n
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 383432k/393216k available (2879k kernel code, 9308k reserved, 1001k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1773.56 BogoMIPS (lpj=886784)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1487k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Disabling VIA memory write queue (PCI ID 0305, rev 02): [55] 89 & 1f -> 09
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
Machine check exception polling timer started.
gx-suspmod: error: no MediaGX/Geode processor found!
speedstep-smi: No Intel CPU detected.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
Applying VIA southbridge workaround.
inotify init: minor=63
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
vesafb: NVidia Corporation, NV10 Reference Board, Chip Rev A1 (OEM: NVidia)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:0eb9
vesafb: pmi: set display start = c00c0ef2, set palette = c00c0f68
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: hardware supports DCC2 transfers
vesafb: monitor limits: vf = 150 Hz, hf = 70 kHz, clk = 110 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
vesafb: framebuffer at 0xd0000000, mapped to 0xd8880000, size 16384k
fb0: VESA VGA frame buffer device
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD200BB-00AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-107D, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
st: Version 20040403, fixed bufsize 32768, s/g segs 256
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 642 not supported
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 176k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
ReiserFS: hda8: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda8
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 771080k swap on /dev/hda7. Priority:-1 extents:1
EXT3 FS on hda8, internal journal
PCI: Found IRQ 5 for device 0000:00:09.0
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 322M
agpgart: AGP aperture is 64M @ 0xd8000000
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:0b.0
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:07.3
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0b.0
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: irq 11, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Corega Model: Rev:
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI error: host 0 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
/dev/scsi/host0/bus0/target0/lun0: unknown partition table
SCSI error: host 0 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 2
usb 1-2: new full speed USB device using address 3
scsi1 : SCSI emulation for USB Mass Storage devices
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
PCI: Found IRQ 11 for device 0000:00:0b.0
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:07.3
eth0: VIA Rhine III at 0xe000, 00:20:ed:6b:23:47, IRQ 11.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Vendor: WDC Model: WD800BB-00FRA0 Rev: 77.0
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
sdb: assuming drive cache: write through
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
USB Mass Storage device found at 3
mtrr: 0xd0000000,0x2000000 overlaps existing 0xd0000000,0x1000000


Mount da terminale di Kde:
mount
/dev/hda8 on / type ext3 (rw,noatime)
devfs on /dev type devfs (rw)
none on /proc type proc (rw)
none on /sys type sysfs (rw)
none on /dev/pts type devpts (rw)
/dev/hda5 on /mnt/fat32 type vfat (rw,umask=000)
none on /dev/shm type tmpfs (rw)
none on /proc/bus/usb type usbfs (rw)


Fstab:more /etc/fstab
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13 20:03:38 azarah Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.

# <fs> <mountpoint> <type> <opts> <dump/pass>

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda6 /boot ext2 noauto,noatime 1 2
/dev/hda8 / ext3 noatime 0 1
/dev/hda7 none swap sw 0 0
/dev/hda5 /mnt/fat32 vfat defaults,umask=000 0 0
/dev/cdroms/cdrom0 /mnt/cdrom0 iso9660 noauto,rw,user 0 0
/dev/cdroms/cdrom1 /mnt/cdrom1 iso9660 noauto,ro,user 0 0

/dev/sdb1 /mnt/lacie auto rw,user,auto,async 0 0
/dev/sda /mnt/usb_pen auto rw,user,noauto,async 0 0
#/dev/sda1 /mnt/lacie vfat noatime 0 0
#/dev/fd0 /mnt/floppy auto noauto 0 0

# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:

none /dev/shm tmpfs defaults 0 0


Ma cosi non mi riesce a montare all'avvio l'hd esterno usb (lacie) e devo montarlo a mano...

X il momento mi fermo qui che se no mi serve 1 papiro... :D
Back to top
View user's profile Send private message
pava_rulez
Guru
Guru


Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe

PostPosted: Fri Mar 18, 2005 7:51 pm    Post subject: Reply with quote

Tùrin_Mormegil wrote:
hai provato a dare uno
Code:
shutdown -h now
senza aver aperto X?
se X ti si apre da solo quando avvii premi ctrl+alt+backspace, oppure (da root)
Code:
pidof X
e poi
Code:
kill "il pid di X"
e poi spegni...

p.s. appena puoi posta anche un (sempre da root)
Code:
cat /var/log/messages | grep "3 lettere iniziali del mese (in inglese) con la prima maiuscola e il giorno in cifre" (per esempio "Mar 18")
così vediamo cosa ne pensa il kernel dello shutdown :-)


shutdown -h mi sono dimenticato, ci provo dopo. X mi si avvia da console facendo startx. sai che non esiste da me /var/log/messages? Com'è possibile?

ls -lah /var/log
total 1.4M
drwxr-xr-x 10 root root 4.0K Mar 18 20:24 .
drwxr-xr-x 13 root root 4.0K Mar 14 23:18 ..
-rw-r--r-- 1 root root 32K Mar 18 20:24 Xorg.0.log
-rw-r--r-- 1 root root 33K Mar 18 06:30 Xorg.0.log.old
-rw-r--r-- 1 root root 1.2K Mar 3 00:19 Xorg.8.log
-rw-r--r-- 1 root root 22K Mar 3 00:19 Xorg.8.log.old
drwxr-xr-x 2 root root 4.0K Mar 14 23:27 apache2
drwx------ 2 root root 4.0K Mar 6 17:22 critical
drwxr-xr-x 2 root root 4.0K Feb 27 18:38 cups
-rw-rw---- 1 portage portage 178K Mar 18 01:09 emerge.log
drwx------ 2 root root 4.0K Mar 18 07:10 everything
-rw-r--r-- 1 root root 427K Feb 27 03:52 genkernel.log
drwx------ 2 root root 4.0K Mar 17 23:15 kernel
-rw-r--r-- 1 root root 286K Mar 18 20:23 lastlog
drwxr-xr-x 2 root root 4.0K Oct 27 21:38 news
drwx------ 2 root root 4.0K Mar 1 20:42 pwdfail
drwx------ 2 root root 4.0K Feb 27 14:20 telnet
-rw-rw-r-- 1 root utmp 587K Mar 18 20:25 wtmp
Back to top
View user's profile Send private message
fedeliallalinea
Administrator
Administrator


Joined: 08 Mar 2003
Posts: 30822
Location: here

PostPosted: Fri Mar 18, 2005 7:53 pm    Post subject: Reply with quote

@pava_rulez: perche' usi il testo italico e non racchiudi il codice tra i tag [code][/code]?
_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
Cazzantonio
Bodhisattva
Bodhisattva


Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world

PostPosted: Fri Mar 18, 2005 7:59 pm    Post subject: Reply with quote

pava_rulez wrote:
sai che non esiste da me /var/log/messages? Com'è possibile?


Semplice... sei sicuro di aver emerso
Code:
app-admin/syslog-ng

come riportato alla fine (mi pare... è tanto che non lo leggo tutto) del manuale d'installazione?
una volta emerso va aggiunto al runlevel che vuoi (non so che nome gli hai dato ma probabilmente, se non hai cambiato i nomi, parti nel runlevel "default") con questo comando:
Code:
rc-update add syslog-ng default
(eventualmente sostituisci "default" con il nome del tuo runlevel)
Se hai altre domande mandami un pm che evitiamo di aggiungere altra roba su qusto topic

installa un logger e poi, una volta provato a fare shutdown e compagnia bella, postaci eventuali errori all'interno di /var/log/messages
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne
Back to top
View user's profile Send private message
pava_rulez
Guru
Guru


Joined: 02 Mar 2005
Posts: 339
Location: Bologna -> Italy -> Europe

PostPosted: Fri Mar 18, 2005 8:43 pm    Post subject: Reply with quote

Cazzantonio wrote:

Semplice... sei sicuro di aver emerso
Code:
app-admin/syslog-ng


No, ho metalog ed evidentemente i file di log sono in 1 altra cartellla...

Cazzantonio wrote:
installa un logger e poi, una volta provato a fare shutdown e compagnia bella, postaci eventuali errori all'interno di /var/log/messages


Facendo kill pid _di _kde mi si chiude dando 1 serie di errori che faccio in tempo a segnarmi solo in parte, ma poi da console con
Code:
 shutdown -h now
mi si spegne perfettamente e velocemente il pc.

In /var/log/everything ho fra gli altri log:

Code:
- Last output repeated 3 times -
Mar 17 07:10:19 [init] Switching to runlevel: 6
Mar 17 23:15:28 [kernel] Linux version 2.6.9-gentoo-r1 (root@livecd) (gcc version 3.3.4 20040623 (Gentoo Linu
x 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Sun Feb 27 03:27:45 GMT 2005
Mar 17 23:15:28 [kernel] Linux agpgart interface v0.100 (c) Dave Jones
Mar 17 23:15:28 [kernel] agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
Mar 17 23:15:29 [kernel] parport0: PC-style at 0x378 [PCSPP,EPP]
Mar 17 23:15:29 [kernel] parport_pc: Via 686A parallel port: io=0x378
Mar 17 23:15:29 [kernel] USB Universal Host Controller Interface driver v2.2
Mar 17 23:15:29 [kernel] uhci_hcd 0000:00:07.2: irq 11, io base 0000d400
Mar 17 23:15:29 [kernel] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
Mar 17 23:15:29 [kernel] hub 1-0:1.0: USB hub found
Mar 17 23:15:29 [kernel] PCI: Found IRQ 11 for device 0000:00:07.3
Mar 17 23:15:29 [kernel] uhci_hcd 0000:00:07.3: irq 11, io base 0000d800
Mar 17 23:15:29 [kernel] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
Mar 17 23:15:29 [kernel] hub 2-0:1.0: USB hub found
Mar 17 23:15:30 [kernel] usb 1-1: new full speed USB device using address 2
Mar 17 23:15:30 [kernel] scsi0 : SCSI emulation for USB Mass Storage devices
Mar 17 23:15:30 [kernel]   Vendor: Corega    Model:                   Rev:
Mar 17 23:15:30 [kernel] SCSI device sda: 256000 512-byte hdwr sectors (131 MB)
Mar 17 23:15:30 [kernel] SCSI error: host 0 id 0 lun 0 return code = 8000002
                - Last output repeated twice -
Mar 17 23:15:30 [kernel] Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
Mar 17 23:15:30 [kernel] usb 1-2: new full speed USB device using address 3
Mar 17 23:15:31 [kernel] scsi1 : SCSI emulation for USB Mass Storage devices
Mar 17 23:15:31 [kernel] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
Mar 17 23:15:31 [kernel] eth0: VIA Rhine III at 0xe000, 00:20:ed:6b:23:47, IRQ 11.
Mar 17 23:15:31 [kernel]   Vendor: WDC       Model: WD800BB-00FRA0    Rev: 77.0
Mar 17 23:15:31 [kernel] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
Mar 17 23:15:31 [scsi.agent] disk at /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/host0/0:0:0:0
Mar 17 23:15:31 [kernel] eth0: link up, 10Mbps, half-duplex, lpa 0x0021
Mar 17 23:15:31 [kernel]  p1
Mar 17 23:15:31 [kernel] Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Mar 17 23:15:32 [scsi.agent] disk at /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0/host1/1:0:0:0
Mar 17 23:15:41 [login(pam_unix)] session opened for user root by (uid=0)
Mar 17 23:15:46 [kernel] mtrr: 0xd0000000,0x2000000 overlaps existing 0xd0000000,0x1000000
Mar 17 23:16:14 [gconfd (root-7922)] starting (version 2.6.2), pid 7922 user 'root'
Mar 17 23:16:14 [gconfd (root-7922)] Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read
-only config source at position 0
Mar 17 23:16:14 [gconfd (root-7922)] Resolved address "xml:readwrite:/root/.gconf" to a writable config sourc
e at position 1
Mar 17 23:16:14 [gconfd (root-7922)] Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-
only config source at position 2
Mar 17 23:43:44 [gconfd (root-7922)] GConf server is not in use, shutting down.
Mar 17 23:43:44 [gconfd (root-7922)] Exiting
Mar 17 23:45:21 [gconfd (root-9060)] starting (version 2.6.2), pid 9060 user 'root'
Mar 17 23:45:21 [gconfd (root-9060)] Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read
-only config source at position 0
Mar 17 23:45:21 [gconfd (root-9060)] Resolved address "xml:readwrite:/root/.gconf" to a writable config sourc
e at position 1
Mar 17 23:45:21 [gconfd (root-9060)] Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-
only config source at position 2
Mar 18 00:57:51 [gconfd (root-9060)] GConf server is not in use, shutting down.
Mar 18 00:57:51 [gconfd (root-9060)] Exiting
Mar 18 06:55:23 [gconfd (root-15163)] starting (version 2.6.2), pid 15163 user 'root'
Mar 18 06:55:23 [gconfd (root-15163)] Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a rea
d-only config source at position 0
Mar 18 06:55:23 [gconfd (root-15163)] Resolved address "xml:readwrite:/root/.gconf" to a writable config sour
ce at position 1
Mar 18 06:55:23 [gconfd (root-15163)] Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read
-only config source at position 2
Mar 18 07:06:23 [gconfd (root-15163)] GConf server is not in use, shutting down.
Mar 18 07:06:23 [gconfd (root-15163)] Exiting


Per Cazzantonio, prima ti ho mandato 1 pm ma non eri in linea, magari in sti giorni ci riprovo...
Back to top
View user's profile Send private message
Cazzantonio
Bodhisattva
Bodhisattva


Joined: 20 Mar 2004
Posts: 4514
Location: Somewere around the world

PostPosted: Fri Mar 18, 2005 8:55 pm    Post subject: Reply with quote

Non ho mai usato metalog ma penso che il tuo /var/logeverything corrisponda a /var/log/messages di syslog...

da quanto hai postato non riesco a capire il tuo problema... comunque non ci hai ancora detto 2 cose mi pare (o forse me le sono perse io):
1) che succede se dai shutdown a manina? prova da dentro X, fuori da X (da console ma con X acceso), e con X spento
2) hai provato ad usare altri wm? che so... gnome?
_________________
Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne
Back to top
View user's profile Send private message
nggtony
n00b
n00b


Joined: 27 Sep 2005
Posts: 27
Location: Messina - Sicily - Italy

PostPosted: Wed Feb 08, 2006 11:35 pm    Post subject: Reply with quote

anch'io ho lo stesso problema, il mio desktop environment è gnome, se voglio spegnere il pc lo devo fare da Desktop -> Termina sesione -> Arresta sistema , se invece da terminale (come root) digito halt o reboot, il computer non si spegne o non si riavvia, spariscono le icone di gnome dal desktop, rimane solo il wallpaper, ma non si spegne.... premetto che io non avvio X con il comando startx ma direttamente con gdm.
P.S. il kernel che uso è il genkernel
Back to top
View user's profile Send private message
lucapost
Veteran
Veteran


Joined: 24 Nov 2005
Posts: 1419
Location: <ud|me|ts> - Italy

PostPosted: Fri Dec 08, 2006 3:31 pm    Post subject: Reply with quote

Ho sempre avuto questo problema sul desktop.
Per spegne il computer utilizzo da root:
Code:
shutdown -h now

quindi sembra partire tutto regolarmente fino a quando non rimane la schermata:
Code:
...
...
Remounting remaing filesystems readonly [OK]
System halted.

e qui fino a quando non spengo il pc con il pulsante di accensione, la ventola continua a girare, lo schermo rimane acceso....
Sul desk tengo tutto in ~x86. Il processore è un amd-k6.
Non penso sia un problema di bios visto che da winzoz tutto ok.
Mi aiutate a risolvere?
_________________
LP
Back to top
View user's profile Send private message
Ic3M4n
Advocate
Advocate


Joined: 02 Nov 2004
Posts: 3489
Location: Bergamo.

PostPosted: Fri Dec 08, 2006 3:42 pm    Post subject: Reply with quote

io avevo questo problema quando non avevo l'acpi compilato nel kernel... dopotutto il pc utilizzava l'apm. ho provato a compilare l'acpi e tutto fungeva.
Back to top
View user's profile Send private message
lucapost
Veteran
Veteran


Joined: 24 Nov 2005
Posts: 1419
Location: <ud|me|ts> - Italy

PostPosted: Fri Dec 08, 2006 4:58 pm    Post subject: Reply with quote

grazie mille, ho abilitato acpi, con un pò di moduli forse inutili,e ora funge.
Quando avrò voglia di far un pò di debug vi saprò dire qual'è quello che serve.
_________________
LP
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Forum italiano (Italian) All times are GMT
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum