godzilla n00b
Joined: 26 Aug 2005 Posts: 29
|
Posted: Wed Aug 23, 2006 1:36 am Post subject: Ultra 5 + type 5C + 2.4.32 + xorg 6.8.2 |
|
|
Finally, I got xorg working so now I can use mozilla to browse for help
I am completely new to Sun/Sparc, so I do have a few [more] questions:
1. Keyboard seems to be working good, except I cannot get out of X into text terminals (control+alt+F1-6)
keyboard section of xorg.conf:
Code: |
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "Protocol" "Standard"
Option "XkbKeycodes" "sun(type5)"
Option "XkbModel" "type5"
Option "XkbRules" "sun"
Option "XkbLayout" "en_US"
Option "XkbTypes" "types/complete"
Option "XkbCompat" "compat/complete"
Option "XkbGeometry" "sun(type5unix)"
EndSection
|
In some forums people suggested to use
Code: |
Option "HandleSpecialKeys" "Always"
|
in Section "ServerLayout", but this did not help.
2. My Ultra 5 has onboard ATI 3D Rage Pro with 4MB RAM (at least this is what xorg says)
Code: |
(--) ATI(0): ATI 3D Rage Pro graphics controller detected.
(--) ATI(0): Chip type 4750 "GP", version 4, foundry UMC, class 0, revision 0x01.
(--) ATI(0): PCI bus interface detected.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(II) ATI(0): Storing hardware cursor image at 0xE13FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0xE1800000.
(!!) ATI(0): Virtual resolutions will be limited to 4095 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0xE2000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xE2000000.
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 4096 kB of SGRAM (1:1) detected (using 4095 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 99.765 MHz; Refresh rate code 7.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
|
Is there a way to make it work in 1280x1024 x24bpp?
In theory, 3 bytes per pixel at that resolution should fit in 4 MB. On practice, only 1024x768 is available in 24bpp...
3. is it possible to use 2D/3D hardware acceleration on this card on sparc?
4. In text console (no X), "Del" works as "Back Space", and it drives me nuts!
5. if I would put another PCI video card in this box, is it possible to use it as a primary video for the box (or just disable onboard)?
Is there an equivalent for BIOS SETUP where I could look at all the goods under the hood and tweak them?
6. how can I find out my CPU cache size? (cat /proc/cpuinfo does not say it)
Thanks ! |
|