| View previous topic :: View next topic |
| Author |
Message |
dudesinmexico
n00b
Joined: 02 Jan 2003
Posts: 6
|
 Posted: Wed Jan 15, 2003 5:45 am Post subject: System with Geforce MX440 and SCSI hangs at boot |
 |
|
This is weird. My system has an ASUS P4PE mobo with an Adaptec SCSI controller and it runs Gentoo Linux 1.4_rc2.
I recenlty switched graphics card from a Matrox G550 to an MSI MX440-T8X (Geforce mx440 chipset), and now I have a problem booting. I did not have any problem like this with the Matrox. The kernel is loaded from the SCSI disk, but it hangs after printing:
| Code: |
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Unknown @ 0xf8000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 7 for device 02:0c.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 19160B Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
|
The full dmesg is below. I have already tried changing the slot of the SCSI controller, but nothing changed.
please help!
-dudesinmexico
| Code: |
Linux version 2.4.19-gentoo-r10 (root@project.caltech.edu) (gcc version 3.2.1 20021207 (Gentoo Linux 3.2.1-20021207)) #4 SMP Tue Jan 14 06:44:10 PST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffec000 (usable)
BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data)
BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Advanced speculative caching feature not present
On node 0 totalpages: 131052
zone(0): 4096 pages.
zone(1): 126956 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/sda3 hdc=scsi
ide_setup: hdc=scsi
Found and enabled local APIC!
Initializing CPU#0
Detected 2539.169 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5059.37 BogoMIPS
Memory: 511628k/524208k available (1805k kernel code, 10016k reserved, 716k data, 116k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04
per-CPU timeslice cutoff: 1462.56 usecs.
task migration cache decay timeout: 10 msecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2539.0957 MHz.
..... host bus clock speed is 133.6364 MHz.
cpu: 0, clocks: 1336364, slice: 668182
CPU0<T0:1336352,T1:668160,D:10,S:668182,C:1336364>
migration_task 0 on cpu=0
PCI: PCI BIOS revision 2.10 entry at 0xf1e40, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Found IRQ 4 for device 00:1f.1
PCI: Sharing IRQ 4 with 00:1d.2
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaio, hdbio
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Intel i845G chipset
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Unknown @ 0xf8000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 7 for device 02:0c.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 19160B Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
|
[/quote] |
|
| Back to top |
|
 |
drakonite
l33t
Joined: 02 Nov 2002
Posts: 768
Location: Lincoln, NE
|
| Posted: Wed Jan 15, 2003 10:21 am Post subject: |
|
|
| Have you tried removing all the Matrox drivers from the kernel? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
