| View previous topic :: View next topic |
| Author |
Message |
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
 Posted: Fri Nov 04, 2005 8:01 am Post subject: |
 |
|
| bkunlimited wrote: | Thanks a lot VinzC!! You made my day  |
You're welcome 
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
 |
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Fri Nov 04, 2005 8:39 am Post subject: |
|
|
| gothis wrote: | Hi all!
I've been reading this thread from the first message to the last and I still can't get dri to work properly 
I get X to run and all that, but no dri |
You just had to look at the second post on page 10...
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
gothis
n00b
Joined: 04 Nov 2005
Posts: 5
|
| Posted: Fri Nov 04, 2005 6:12 pm Post subject: |
|
|
| Quote: |
You just had to look at the second post on page 10...
|
This doesn't seem to work with the current version: xorg-x11-6.8.99.15-r4.ebuild
i emerged sync yesterday and have no xorg-x11-6.8.99.15
when i try to apply the patch there anyway, X freezes on startup.
I've recompiled xorg so many times now i'm about to throw the computer out of the window.
i have /dev/dri/card0 up and all that but no direct render in glxinfo. + slow fps |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Fri Nov 04, 2005 9:50 pm Post subject: |
|
|
| gothis wrote: | | This doesn't seem to work with the current version: xorg-x11-6.8.99.15-r4.ebuild |
It should. I have successfully applied the patch on my laptop, which runs xorg 6.8.99.15-r4. I got the same increase ratio as before: from 800 FPS to 1300 FPS.
| gothis wrote: | i emerged sync yesterday and have no xorg-x11-6.8.99.15
when i try to apply the patch there anyway, X freezes on startup. |
What do you mean with that? Versions 6.8.99.xxx are masked (with ~arch and with package.mask).
Also note that xorg-drm from portage does apply only to ATI cards. You don't need that.
Xorg freezes have been largely discussed too in this forum. You should find useful info by searching xorg+freeze+i915.
| gothis wrote: | | i have /dev/dri/card0 up and all that but no direct render in glxinfo. + slow fps |
Since i915 support is included in recent kernels drm is enabled; so having the node you indicated is expected. The lnx_agp patch does force Xorg to use it properly.
And one last thing that has to be often repeated: don't use DRI snapshots.
Again:
--- 1. Please: don't use DRI snapshots with i915 ---
--- 2. Please: read before posting! ---
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739!
Last edited by VinzC on Thu Nov 10, 2005 11:26 am; edited 2 times in total |
|
| Back to top |
|
|
evinay
n00b
Joined: 05 Nov 2005
Posts: 7
Location: Kanpur,India
|
| Posted: Sat Nov 05, 2005 10:11 am Post subject: xorg.conf |
|
|
Hi i am using the intel915gav graphics card.I tried to use xorgconfig which does not work.
it says fatal error.unable to load root pointer and mouse not detected etc...
Can anyone tell me how to write xorg.conf for this chipset?
_________________
pain is good |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Sat Nov 05, 2005 10:25 am Post subject: Re: xorg.conf |
|
|
| evinay wrote: | Hi i am using the intel915gav graphics card.I tried to use xorgconfig which does not work.
it says fatal error.unable to load root pointer and mouse not detected etc...
Can anyone tell me how to write xorg.conf for this chipset? |
Could you post an excerpt of /var/log/Xorg.0.log where those error messages appear? For example you can post the results of the following command:
| Code: | | grep -C 5 "(EE)" /var/log/Xorg.0.log |
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739!
Last edited by VinzC on Sun Nov 06, 2005 9:57 am; edited 1 time in total |
|
| Back to top |
|
|
evinay
n00b
Joined: 05 Nov 2005
Posts: 7
Location: Kanpur,India
|
| Posted: Sat Nov 05, 2005 3:22 pm Post subject: intel 915gav Xorg.0.log |
|
|
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13-gentoo-r5 i686 [ELF]
Current Operating System: Linux evinay 2.6.13-gentoo-r5 #1 SMP Sat Nov 5 09:18:41 UTC 2005 i686
Build Date: 05 November 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 5 14:11:08 2005
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2580 card 8086,4156 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2581 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 8086,2582 card 8086,4156 rev 04 class 03,00,00 hdr 00
(II) PCI: 00:1b:0: chip 8086,2668 card 8086,e203 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2662 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,2664 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:3: chip 8086,2666 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 8086,4156 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 8086,4156 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 8086,4156 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 8086,4156 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 8086,4156 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev d3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2640 card 8086,4156 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 8086,4156 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2651 card 8086,4156 rev 03 class 01,01,8f hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 8086,4156 rev 03 class 0c,05,00 hdr 00
(II) PCI: 06:01:0: chip 10ec,8139 card 11f6,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xffa00000 - 0xffafffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xcff00000 - 0xcfffffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:28:0), (0,5,5), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xff600000 - 0xff6fffff (0x100000) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xcfb00000 - 0xcfbfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:1), (0,4,4), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xff700000 - 0xff7fffff (0x100000) MX[B]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xcfc00000 - 0xcfcfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:2), (0,3,3), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xff800000 - 0xff8fffff (0x100000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xcfd00000 - 0xcfdfffff (0x100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:3), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xff900000 - 0xff9fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xcfe00000 - 0xcfefffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 6: bridge is at (0:30:0), (0,6,6), BCTRL: 0x0206 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0xff500000 - 0xff5fffff (0x100000) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0xcfa00000 - 0xcfafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:2:0) Intel Corp. unknown chipset (0x2582) rev 4, Mem @ 0xff480000/19, 0xd0000000/28, 0xff440000/18, I/O @ 0xec00/3
List of video drivers:
atimisc
r128
radeon
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
i128
nsc
i810
ati
ark
cyrix
siliconmotion
via
vesa
vga
dummy
fbdev
v4l
(II) LoadModule: "atimisc"
(II) Loading /usr/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "r128"
(II) Loading /usr/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "radeon"
(II) Loading /usr/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mga"
(II) Loading /usr/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "glint"
(II) Loading /usr/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nv"
(II) Loading /usr/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tga"
(II) Loading /usr/lib/modules/drivers/tga_drv.o
(II) Module tga: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3"
(II) Loading /usr/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.3.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "s3virge"
(II) Loading /usr/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.8.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "sis"
(II) Loading /usr/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.7.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "rendition"
(II) Loading /usr/lib/modules/drivers/rendition_drv.o
(II) Module rendition: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "neomagic"
(II) Loading /usr/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i740"
(II) Loading /usr/lib/modules/drivers/i740_drv.o
(II) Module i740: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tdfx"
(II) Loading /usr/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "savage"
(II) Loading /usr/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.27
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vmware"
(II) Loading /usr/lib/modules/drivers/vmware_drv.o
(II) Module vmware: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 10.10.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "tseng"
(II) Loading /usr/lib/modules/drivers/tseng_drv.o
(II) Module tseng: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "trident"
(II) Loading /usr/lib/modules/drivers/trident_drv.o
(II) Module trident: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "chips"
(II) Loading /usr/lib/modules/drivers/chips_drv.o
(II) Module chips: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "apm"
(II) Loading /usr/lib/modules/drivers/apm_drv.o
(II) Module apm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i128"
(II) Loading /usr/lib/modules/drivers/i128_drv.o
(II) Module i128: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "nsc"
(II) Loading /usr/lib/modules/drivers/nsc_drv.o
(II) Module nsc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 2.7.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "i810"
(II) Loading /usr/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ati"
(II) Loading /usr/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 6.5.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "ark"
(II) Loading /usr/lib/modules/drivers/ark_drv.o
(II) Module ark: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.5.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "cyrix"
(II) Loading /usr/lib/modules/drivers/cyrix_drv.o
(II) Module cyrix: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.3.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "via"
(II) Loading /usr/lib/modules/drivers/via_drv.o
(II) Module via: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 4.1.30
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vesa"
(II) Loading /usr/lib/modules/drivers/vesa_drv.o
(II) Module vesa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "vga"
(II) Loading /usr/lib/modules/drivers/vga_drv.o
(II) Module vga: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 4.0.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "dummy"
(II) Loading /usr/lib/modules/drivers/dummy_drv.o
(II) Module dummy: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/modules/drivers/fbdev_drv.o
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "v4l"
(II) Loading /usr/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.0.1
ABI class: X.Org Video Driver, version 0.7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xff510000 - 0xff5100ff (0x100) MX[B]
[1] -1 0 0xff43bc00 - 0xff43bfff (0x400) MX[B]
[2] -1 0 0xff43c000 - 0xff43ffff (0x4000) MX[B]
[3] -1 0 0xff440000 - 0xff47ffff (0x40000) MX[B](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[5] -1 0 0xff480000 - 0xff4fffff (0x80000) MX[B](B)
[6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[7] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[8] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[10] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[11] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[12] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B]
[13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[16] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[17] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xff510000 - 0xff5100ff (0x100) MX[B]
[1] -1 0 0xff43bc00 - 0xff43bfff (0x400) MX[B]
[2] -1 0 0xff43c000 - 0xff43ffff (0x4000) MX[B]
[3] -1 0 0xff440000 - 0xff47ffff (0x40000) MX[B](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[5] -1 0 0xff480000 - 0xff4fffff (0x80000) MX[B](B)
[6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[7] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[8] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[9] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[10] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[11] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[12] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B]
[13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[14] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[16] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[17] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff510000 - 0xff5100ff (0x100) MX[B]
[6] -1 0 0xff43bc00 - 0xff43bfff (0x400) MX[B]
[7] -1 0 0xff43c000 - 0xff43ffff (0x4000) MX[B]
[8] -1 0 0xff440000 - 0xff47ffff (0x40000) MX[B](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xff480000 - 0xff4fffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[17] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[18] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[19] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B]
[20] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[23] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[24] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) Primary Device is: PCI 00:02:0
(II) Loading sub module "cirrus_laguna"
(II) LoadModule: "cirrus_laguna"
(II) Loading /usr/lib/modules/drivers/cirrus_laguna.o
(II) Module cirrus_laguna: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "cirrus_alpine"
(II) LoadModule: "cirrus_alpine"
(II) Loading /usr/lib/modules/drivers/cirrus_alpine.o
(II) Module cirrus_alpine: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) ATI: Shared non-ATI VGA in PCI/AGP slot 0:2:0 detected.
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) v4l driver for Video4Linux
(++) Using config file: "/root/xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/share/fonts/CID/" does not exist.
Entry deleted from font path.
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/lib/X11/rgb"
(**) ModulePath set to "/usr/lib/modules"
(--) Chipset 915G found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff510000 - 0xff5100ff (0x100) MX[B]
[6] -1 0 0xff43bc00 - 0xff43bfff (0x400) MX[B]
[7] -1 0 0xff43c000 - 0xff43ffff (0x4000) MX[B]
[8] -1 0 0xff440000 - 0xff47ffff (0x40000) MX[B](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xff480000 - 0xff4fffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[14] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[15] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[17] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[18] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[19] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B]
[20] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[21] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[22] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[23] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[24] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[25] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff510000 - 0xff5100ff (0x100) MX[B]
[6] -1 0 0xff43bc00 - 0xff43bfff (0x400) MX[B]
[7] -1 0 0xff43c000 - 0xff43ffff (0x4000) MX[B]
[8] -1 0 0xff440000 - 0xff47ffff (0x40000) MX[B](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[10] -1 0 0xff480000 - 0xff4fffff (0x80000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[17] -1 0 0x0000c400 - 0x0000c41f (0x20) IX[B]
[18] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[19] -1 0 0x0000dc00 - 0x0000dc03 (0x4) IX[B]
[20] -1 0 0x0000e000 - 0x0000e007 (0x8) IX[B]
[21] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[22] -1 0 0x0000e800 - 0x0000e807 (0x8) IX[B]
[23] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[24] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[25] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[26] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[27] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[28] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B](B)
[29] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[30] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/modules/libvbe.a
(II) Module vbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915G/915GV/910GL Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915G/915GV/910GL Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
Xorg is not able to detect your mouse.
Edit the file and correct the Device.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new'
_________________
pain is good |
|
| Back to top |
|
|
evinay
n00b
Joined: 05 Nov 2005
Posts: 7
Location: Kanpur,India
|
| Posted: Sun Nov 06, 2005 3:28 am Post subject: setting up x windows |
|
|
Hi
I finished installing gentoo on my pc., an Intel 915 gav chipset.Now i would like to set up
x windows so that i can have a desktop environment.I followed the handbook,but it failed.
Can you please explain me in detail how to setup xwindows,write xorg.conf etc...
A detailed explanation would be appreciated
Thanking you in advance
Vinay E
_________________
pain is good |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Sun Nov 06, 2005 9:51 am Post subject: Re: setting up x windows |
|
|
| evinay wrote: | Hi
I finished installing gentoo on my pc., an Intel 915 gav chipset.Now i would like to set up
x windows so that i can have a desktop environment.I followed the handbook,but it failed.
Can you please explain me in detail how to setup xwindows,write xorg.conf etc...
A detailed explanation would be appreciated
Thanking you in advance
Vinay E |
From your previous post only the first and last few lines are useful.
| evinay wrote: | X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.13-gentoo-r5 i686 [ELF]
Current Operating System: Linux evinay 2.6.13-gentoo-r5 #1 SMP Sat Nov 5 09:18:41 UTC 2005 i686
Build Date: 05 November 2005
... |
Which means your using Xorg 6.8.2 (r4?) but you didn't specify which release. You're using Gentoo Sources 2.6.13-r5 appearently.
The end of your Xorg log file says:
| evinay wrote: | Xorg is not able to detect your mouse.
Edit the file and correct the Device.
Your xorg.conf file is /root/xorg.conf.new
To test the server, run 'X -config /root/xorg.conf.new' |
Xorg was not able to detect your mouse. This is probably because you didn't enable mouse support in your kernel or because the appropriate module was not loaded. Reasons why the module was not loaded can be
- You didn't emerge coldplug/hotplug
- You didn't add mouse support in your kernel (are you using PS2 or USB mouse?)
- You didn't put the module name in /etc/modules.autoload.d/kernel-2.6
- You didn't add coldplug to the default runlevel
- The "Device" option in your Xorg's config InputDevice section is wrong or missing.
Did you run X -config /root/xorg.conf.new? If yes, did you have an error message? If yes what was the error message exactly?
You said you followed Gentoo Handbook but it failed.
- What were the exact steps that you followed?
- What were the instructions you typed and what service/command/step exactly failed?
- What desktop environment do you want exactly? Gnome? KDE? Fluxbox? Enlightenment? XFCE4?...
If you want accurate help, please, provide a detailed explanation on what you have and what you want too.
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
evinay
n00b
Joined: 05 Nov 2005
Posts: 7
Location: Kanpur,India
|
| Posted: Mon Nov 07, 2005 8:05 am Post subject: i guess i solved |
|
|
Hi
I guess i solved the problem.Actually xorgconfigure could not detect my mouse device.
i used xorgcfg to select the device.Then i installed kde-3.4.2.
till now kde seems good,no problems.
_________________
pain is good |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Mon Nov 07, 2005 9:24 am Post subject: Re: i guess i solved |
|
|
| evinay wrote: | Hi
I guess i solved the problem.Actually xorgconfigure could not detect my mouse device.
i used xorgcfg to select the device.Then i installed kde-3.4.2.
till now kde seems good,no problems. |
Fine. Would you mind shortening a bit your post with Xorg's log and leave only the relevant parts? Enclose it also in [code] brackets. Thanks.
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
cradlebin
n00b
Joined: 18 Sep 2004
Posts: 32
|
| Posted: Thu Nov 10, 2005 9:13 am Post subject: |
|
|
Hi,
I don't know how you guys did it, but I'm still having problems getting my intel 915GM videocard to work with xorg.
What I did is as follows:
Installed xorg-6.8.2
Installed the dri-snapshots
Put the Driver "i810" in xorg.conf
but still xorg complains about:
| Code: | "(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(EE) No devices detected. |
And I don't find any way to make it work :/
Some more info you might need to help me:
- The module i915 is loaded without problems
- The dmesg output about agpgart is as follows:
| Code: | Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Detected 16124K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
|
- Then the output of dmesg | grep drm (don't know if you need this, just to be a bit verbose)
| Code: | [drm] Initialized drm 1.0.1 20051102
[drm:fill_in_dev] *ERROR Cannot initialize the agpgart module.
DRM: drm_get_dev failed.
|
Note: this is before modprobe'ing i915, here is the output after:
| Code: |
[drm] Initialized i915 1.2.0 20041217 on minor 0:
[drm] Used old pci detect: framebuffer loaded
|
- So that leads us to the output of lspci:
| Code: |
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Expess GRaphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) |
- And last but not least, some relevant xorg.conf details:
| Code: |
Section "Device"
Identifier "My Video Card"
Driver "i810"
EndSection |
I've tried specifying the BusID to PCI:0:2:0, but xorg still complains about device on PCI:0:2:1, if I change BusID to PCI:0:3:0, he seems to check both 0:2:0 and 0:2:1, but they both fail with the no Devices found error.
I hope someone will be able to help, if more info is needed, just ask (as there's a good chance I have forgotten something). |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Thu Nov 10, 2005 11:20 am Post subject: |
|
|
That's humour, isn't it? 
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
bkunlimited
l33t
Joined: 18 Jun 2004
Posts: 672
|
| Posted: Thu Nov 10, 2005 12:51 pm Post subject: |
|
|
i followed your howto for DRI and it works perfect!! i also get ~1300 fps with glxgears!
Thanks for the hint!! |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Thu Nov 10, 2005 1:30 pm Post subject: |
|
|
| bkunlimited wrote: | i followed your howto for DRI and it works perfect!! i also get ~1300 fps with glxgears!
Thanks for the hint!! |
Glad I could help. As seppelrockt explained in another thread, switching to Xorg 7.0 might simply solve everything (DRI with i915 support).
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
cradlebin
n00b
Joined: 18 Sep 2004
Posts: 32
|
| Posted: Thu Nov 10, 2005 1:50 pm Post subject: |
|
|
| VinzC wrote: |
That's humour, isn't it? |
No ...  |
|
| Back to top |
|
|
bkunlimited
l33t
Joined: 18 Jun 2004
Posts: 672
|
| Posted: Thu Nov 10, 2005 2:03 pm Post subject: |
|
|
| cradlebin wrote: | ...
Installed xorg-6.8.2
|
better try xorg-x11-6.8.99.15-r4. After i switched to it all my problems were gone. |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Thu Nov 10, 2005 3:06 pm Post subject: |
|
|
| cradlebin wrote: | | VinzC wrote: |
That's humour, isn't it? |
No ... |
Well, I can understand reading a long thread is a bit boring but there are posts no further than the top of this page that explain not to use DRI snapshots and to migrate to xorg 6.8.99.15. Please read and/or search before you post. There are so many places where people who have tried DRI snapshots advise *not* to use them with i915. Just go to the search page and type "i915 dri snapshots", for an overview.
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
cradlebin
n00b
Joined: 18 Sep 2004
Posts: 32
|
| Posted: Thu Nov 10, 2005 3:24 pm Post subject: |
|
|
Yeah, well, normally I try to read everything as much as possible, in this case my time was a bit limited so I apparently didn't see that post of yours about not using the dri snapshots. Problem is my search query (intel 915GM xorg) on the forums brought up a lot of threads with lots of different info that conflicted in one way or another with each other so I was a bit overwhelmed with info and didn't really know what to believe.
But ok, I shall do as suggested now.
Thanks for the help (you edited that one post so the DRI-thing is in a bigger font now, didn't you? :p). |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Thu Nov 10, 2005 3:43 pm Post subject: |
|
|
| cradlebin wrote: | Yeah, well, normally I try to read everything as much as possible, in this case my time was a bit limited so I apparently didn't see that post of yours about not using the dri snapshots. Problem is my search query (intel 915GM xorg) on the forums brought up a lot of threads with lots of different info that conflicted in one way or another with each other so I was a bit overwhelmed with info and didn't really know what to believe.
But ok, I shall do as suggested now. |
You can display results as posts not as topics to get directly to the messages of interrest. Keyword for Intel 915 here is i915.
| cradlebin wrote: | | Thanks for the help (you edited that one post so the DRI-thing is in a bigger font now, didn't you? :p). |
Yup. But don't worry, I have to do that regularly as the thread grows
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
nelchael
Retired Dev
Joined: 20 Mar 2004
Posts: 1948
Location: /dev/drzewo
|
| Posted: Thu Nov 10, 2005 8:56 pm Post subject: |
|
|
[ sorry if this was already said, I don't like to read 9 pages of thread ]
I've got i915 too, all I needed to do is described here: http://dev.gentoo.org/~nelchael/A3E-5018.html
Notebook is Asus A3E-5018 (as link says ).
_________________
[color=gray:17697d0166]http://dev.gentoo.org/~nelchael/[/color:17697d0166]
[size=14:17697d0166]>> [b:17697d0166]Zasady na f.g.o->Polish[/b:17697d0166] <<[/size:17697d0166] |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Sun Nov 13, 2005 11:01 am Post subject: |
|
|
| nelchael wrote: | [ sorry if this was already said, I don't like to read 9 pages of thread ]
I've got i915 too, all I needed to do is described here: http://dev.gentoo.org/~nelchael/A3E-5018.html
Notebook is Asus A3E-5018 (as link says ). |
Right, but you don't have DRI working :p
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
nelchael
Retired Dev
Joined: 20 Mar 2004
Posts: 1948
Location: /dev/drzewo
|
| Posted: Sun Nov 13, 2005 11:17 am Post subject: |
|
|
| VinzC wrote: | | nelchael wrote: | [ sorry if this was already said, I don't like to read 9 pages of thread ]
I've got i915 too, all I needed to do is described here: http://dev.gentoo.org/~nelchael/A3E-5018.html
Notebook is Asus A3E-5018 (as link says ). |
Right, but you don't have DRI working :p |
No?
| Code: | nelchael@nelchael ~$ glxinfo | head -n 3
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
nelchael@nelchael ~$ |
So what does "direct rendering: Yes" mean?
_________________
[color=gray:17697d0166]http://dev.gentoo.org/~nelchael/[/color:17697d0166]
[size=14:17697d0166]>> [b:17697d0166]Zasady na f.g.o->Polish[/b:17697d0166] <<[/size:17697d0166] |
|
| Back to top |
|
|
VinzC
Watchman
Joined: 17 Apr 2004
Posts: 5098
Location: Dark side of the mood
|
| Posted: Sun Nov 13, 2005 12:07 pm Post subject: |
|
|
| nelchael wrote: | | VinzC wrote: | | Right, but you don't have DRI working :p |
No?
| Code: | nelchael@nelchael ~$ glxinfo | head -n 3
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
nelchael@nelchael ~$ |
So what does "direct rendering: Yes" mean? |
Well, as per your document it doesn't hit in the face... I was looking at the figure. About 800 FPS is what we get when DRI is *not* enabled . After the patch it gets to almost 1300. Would ASUS implement i915 in a different manner than Dell?
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739! |
|
| Back to top |
|
|
nelchael
Retired Dev
Joined: 20 Mar 2004
Posts: 1948
Location: /dev/drzewo
|
| Posted: Sun Nov 13, 2005 12:17 pm Post subject: |
|
|
| VinzC wrote: | | Well, as per your document it doesn't hit in the face... I was looking at the figure. About 800 FPS is what we get when DRI is *not* enabled . After the patch it gets to almost 1300. Would ASUS implement i915 in a different manner than Dell? |
I get over 1300 FPS in 16 bit color, in 24 (which I need more than speed) I get ~800.
_________________
[color=gray:17697d0166]http://dev.gentoo.org/~nelchael/[/color:17697d0166]
[size=14:17697d0166]>> [b:17697d0166]Zasady na f.g.o->Polish[/b:17697d0166] <<[/size:17697d0166] |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
