| View previous topic :: View next topic |
| Author |
Message |
gakula
n00b
Joined: 05 Jan 2004
Posts: 72
|
 Posted: Tue Feb 15, 2005 6:38 pm Post subject: ati-drivers-8.8.25-r3 any OpenGL apps freeze |
 |
|
hello everybody,
I've got a new laptop with P4M 3.2, ATI Radeon 9100 IGP and ATI-IXP chipset. Native Xorg-6.8.* Radeon drivers work but give me about 650 fps running glxgears in 24bpp mode/default window size. I tried to run my son's favorites like AAO or NWN and it's totally unplatable.
Even my old laptop with P4M 1.8 and ATI Radeon Mobility 7500 gives me about 540 fps and acceptable frame rate playing those games.
Ok. I've installed ati-drivers-8.8.25-r3 along with Xorg-6.8.2. Everything seems to be just fine beside a couple complains
| Code: |
No matching visual for __GLcontextMode with visual class = 3 (32772), nplanes = 8
No matching visual for __GLcontextMode with visual class = 3 (32772), nplanes = 8
|
BUT, whenever i start any OpenGL programm, including glxgeatr or fgl_glxgears, my computer gets frozen and requires power off/on cycle.
Yes:
1) I don't have any DRI related stuff in my kernel (2.6.10-gentoo-r7)
2) I do have my AGP support modules (agpgart + ati_agp)
3) I ran opengl-update ati after building ati-drivers and few time later
4) I tried both "yes" and "no" for "UseInternalAGPGART" option (when it was "no" i loaded ati_agp&agpgart modules before flgrx one)
Here is what I get when I start X
| Code: |
(II) Primary Device is: PCI 01:05:0
(--) Assigning device section with no busID to primary device
(--) Chipset MOBILITY RADEON 9000/9100 IGP (RS300M 5835) found
.
.
.
(**) fglrx(0): Option "mtrr" "on"
(--) fglrx(0): Chipset: "MOBILITY RADEON 9000/9100 IGP (RS300M 5835)" (Chipset = 0x5835)
(--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xff02)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xe8100000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x01
(--) fglrx(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is supported
.
.
.
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector0: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type NONE
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- LVDS
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): Secondary head:
Monitor -- NONE
Connector -- None
DAC Type -- Unknown
TMDS Type -- NONE
DDC Type -- NONE
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: CPT
(II) fglrx(0): Panel Size from BIOS: 1280x800
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Overlay disabled
(**) fglrx(0): OpenGL Overlay enabled
(II) fglrx(0): PLL parameters: rf=1432 rd=6 min=20000 max=35000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): No valid mode specified, force to native mdoe
(II) fglrx(0): Total 1 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 48.8 kHz, 59.5 Hz
(II) fglrx(0): Modeline "1280x800" 71.00 1280 1312 1344 1456 800 801 804 820
(==) fglrx(0): DPI set to (75, 75)
.
.
.
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 4.3.99.902, module version = 8.8.25
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x00000000
(**) fglrx(0): cpuSpeedMHz: 0x00000c81
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
.
.
.
(II) fglrx(0): UMM area: 0xf05e9000 (size=0x03a17000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(WW) fglrx(0): could not detect XFree86 version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:5:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
.
.
.
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:5:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xdca13000
(II) fglrx(0): [drm] mapped SAREA 0xdca13000 to 0xb7cfe000
(II) fglrx(0): [drm] framebuffer handle = 0xf0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.8.25
(II) fglrx(0): Date: Jan 14 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.10-gentoo-r7-nodri
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xe8100000
(II) fglrx(0): [agp] Mode=0x1f00021b bridge: 0x1002/0x5831
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f00031a
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000312)
(II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xe0c81000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): front overlay: 0xf09d1000
(II) fglrx(0): back overlay: 0xf0acb000
(II) fglrx(0): video overlay: 0xf0bc5000
(II) fglrx(0): FBADPhys: 0x1c000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xf0000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xf0400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xf0500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xf0580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xf05c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xf05e0000, size: 0x9000
(**) fglrx(0): Write-combining range (0xf05e8000,0x1000)
(**) fglrx(0): Write-combining range (0xf05e0000,0x9000)
(**) fglrx(0): Write-combining range (0xf05c0000,0x29000)
(**) fglrx(0): Write-combining range (0xf0580000,0x69000)
(**) fglrx(0): Write-combining range (0xf0500000,0xe9000)
(**) fglrx(0): Write-combining range (0xf0400000,0x1e9000)
(**) fglrx(0): Write-combining range (0xf0000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 800)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Dashed Lines
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
No matching visual for __GLcontextMode with visual class = 3 (32772), nplanes = 8
No matching visual for __GLcontextMode with visual class = 3 (32772), nplanes = 8
.
.
.
|
Here is glxinfo output
| Code: |
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_ATI_pixel_format_float,
GLX_ATI_render_texture
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9000/9100 IGP Series DDR Generic
OpenGL version string: 1.3.4769 (X4.3.0-8.8.25)
OpenGL extensions:
.
.
.
|
Any idea what could cause that problem?
Thanks in advance for any help/suggestions |
|
| Back to top |
|
 |
steve_d555
Guru
Joined: 07 Nov 2004
Posts: 458
Location: Belmont, Massachusetts
|
| Posted: Thu Feb 17, 2005 2:19 am Post subject: |
|
|
If you enable composite that disables DRI, but I dont see how that accounts for GLX apps failing. Try disabling composite and trying it. Also try upgrading to the newest ATI Drivers.
--Steve |
|
| Back to top |
|
|
gakula
n00b
Joined: 05 Jan 2004
Posts: 72
|
| Posted: Thu Feb 17, 2005 4:15 am Post subject: |
|
|
Steve,
Thanks for reply! I belive 8.8.25 is the latest ATI driver and it is installed. And I don't have COMPOSITE extension enabled. Well, nothing has changed when I explicitly disabled it by adding "Extensions" section to my xorg.conf.
Looks like proprietary ATI driver doesn't support mobile version of this chipset 
Unfortunately, DRI Radeon driver from Xorg-6.8.2 gives me very low performance. All OpenGL games work even slower than on another laptop with ATI Mobility Radeon 7500.
| steve_d555 wrote: | If you enable composite that disables DRI, but I dont see how that accounts for GLX apps failing. Try disabling composite and trying it. Also try upgrading to the newest ATI Drivers.
--Steve |
|
|
| Back to top |
|
|
gakula
n00b
Joined: 05 Jan 2004
Posts: 72
|
| Posted: Thu Feb 17, 2005 4:22 am Post subject: |
|
|
Wow! Newest ATI driver is 8.10.19 now. Unfortunately, according to ATI web site
| Quote: | | Caution: This software driver provides 2D support only for the ATI RADEON™ 9100 IGP and ATI RADEON 9100 PRO IGP. |
End of story |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
