Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
2.6.10-bk3-ck1-nitro2 "cd / && rm -rf *"
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6  Next  
Reply to topic    Gentoo Forums Forum Index Unsupported Software
View previous topic :: View next topic  
Author Message
FastXSLT
n00b
n00b


Joined: 09 Mar 2004
Posts: 12
Location: Cambridge, MA, USA

PostPosted: Wed Jan 05, 2005 12:47 am    Post subject: Reply with quote

I must be doing something wrong... my nitro powered rig crawls :cry:
It is Athlon64 3200+ w/ 1GB RAM + 3 Fujitsu SCSI disks on 29160.
Being somewhat of a speed entusiast :) I wanted to give nitro o shot.
The good news is -- no crashes/surprises on installation;
the bad news: the system works, but is hopelessly slow -- every function:
disk (and bad hdparm too), net, app start.
I went back to gentoo-dev-sources 2.6.10 and the machine started
flying again (so I am happy; pehaps this was the point :) )

But seriously: "something went wrong" (as in the famous
newspaper headline
"Something went wrong in the plane crash, expert says.")

Anybody experienced anything similar?
-------------------------------------------------
On a similar note: I noticed people ridiculing Fedora for slugishness,
is is really that slow, or is it autosuggestion? If it is slow, what is the
cause?
Back to top
View user's profile Send private message
landon
Apprentice
Apprentice


Joined: 09 Mar 2004
Posts: 159

PostPosted: Wed Jan 05, 2005 12:55 am    Post subject: Reply with quote

From exp, no. It doesn't seem to be the case with the majority of posters on this thread either.

How did you go about configuring your nitro .config?
Back to top
View user's profile Send private message
FastXSLT
n00b
n00b


Joined: 09 Mar 2004
Posts: 12
Location: Cambridge, MA, USA

PostPosted: Wed Jan 05, 2005 1:01 am    Post subject: Reply with quote

Nothing special; stuff I usually do for my gentoo-dev-sources.
No SMP, ext2 + reiserfs (which I use throughout, except on /boot);
I was happy about 1Gig RAM lowmem option, SCSI driver, etc.

(To fully answer I'd have to quote the .config; not sure how to attach...)
Back to top
View user's profile Send private message
hck333
n00b
n00b


Joined: 07 Jun 2004
Posts: 10
Location: Czech Republic / Brno

PostPosted: Wed Jan 05, 2005 2:45 pm    Post subject: Reply with quote

I must report the same problem:(
Switching from 2.6.9-nitro4 now everything is sloooow, even the boot of the system..I compiled the kernel the same as usual, I think..
It must be some config option, I'll look at it
Back to top
View user's profile Send private message
hck333
n00b
n00b


Joined: 07 Jun 2004
Posts: 10
Location: Czech Republic / Brno

PostPosted: Wed Jan 05, 2005 3:03 pm    Post subject: Reply with quote

here is my .config:
Code:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-nitro2
# Wed Jan  5 11:45:40 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_HZ=1000
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_1GLOWMEM is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# NeTraverse Win4Lin Support
#
# CONFIG_MKI is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# Software Suspend 2
#
# CONFIG_SOFTWARE_SUSPEND2 is not set
# CONFIG_SOFTWARE_SUSPEND2_BUILTIN is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_IOPRIO_WRITE is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8212 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SK98LIN=y
CONFIG_SK98LIN_NAPI=y
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
CONFIG_SND_ICE1724=y
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VX222 is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HID_CHMP is not set
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_CFLAGS_EDIT is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
CONFIG_4KSTACKS=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y
Back to top
View user's profile Send private message
steve_d555
Guru
Guru


Joined: 07 Nov 2004
Posts: 458
Location: Belmont, Massachusetts

PostPosted: Wed Jan 05, 2005 9:49 pm    Post subject: Reply with quote

Hi,
I love Nitro Sources they are just awesome and have been using the latest 2.6.9 Nitro Kernel, but when I tryed to configure the new 2.6.10 one it seems that there are no options for Reiser4 even though I know the patch is included and there is a folder in /usr/src/linux/fs/reiser4.
I dont know. I tried xconfig Show All Options and then it shows up, but I cant seem to enable it.
Please help as my whole distfiles folder is on a reiser4 partition.
Thank you
--Steve
Back to top
View user's profile Send private message
Evil Dark Archon
Guru
Guru


Joined: 21 Dec 2002
Posts: 562
Location: Santa Rosa, CA

PostPosted: Wed Jan 05, 2005 9:54 pm    Post subject: Reply with quote

under kernel hacking, check and make sure that 4k stacks is not enabled.
_________________
This post has been over explained for newb-informing purposes.

Registered Linux user 347334
Abit AV8-3rd eye, AMD Athlon64 3500+ 90nm, ATI Radeon x850 pro
Back to top
View user's profile Send private message
steve_d555
Guru
Guru


Joined: 07 Nov 2004
Posts: 458
Location: Belmont, Massachusetts

PostPosted: Wed Jan 05, 2005 9:54 pm    Post subject: Reply with quote

yep, just found it, thanks alot

--Steve
Back to top
View user's profile Send private message
Pink
Veteran
Veteran


Joined: 24 Jul 2003
Posts: 1062

PostPosted: Wed Jan 05, 2005 10:04 pm    Post subject: Reply with quote

Evil Dark Archon wrote:
under kernel hacking, check and make sure that 4k stacks is not enabled.


Can we start putting that on the first post of each new Nitro - it jst get asked at least five times a page :lol:
Back to top
View user's profile Send private message
steve_d555
Guru
Guru


Joined: 07 Nov 2004
Posts: 458
Location: Belmont, Massachusetts

PostPosted: Wed Jan 05, 2005 10:09 pm    Post subject: Reply with quote

Lol, I had it enabled under the old 2.6.9 Nitro Kernel and I was just using that config. O well another day, another thing learned.
Thanks again
--Steve
Back to top
View user's profile Send private message
discomfitor
l33t
l33t


Joined: 21 Feb 2003
Posts: 927
Location: None

PostPosted: Thu Jan 06, 2005 1:18 am    Post subject: Reply with quote

PickledOnion wrote:
Can we start putting that on the first post of each new Nitro - it jst get asked at least five times a page :lol:


Yeah, it's definitely going there. Almost done with the new nitro (damn win4lin is being a whiny little bitch again). This will most likely be the largest nitro I've ever made or seen, and there's probably several hundred patches on it. Haven't booted into it because I'm not quite finished with the ironing, but I think it will be quite spectacular.

Things to look forward to:

alsa-1.0.8_rc1
ck2
ac4
bk7
the "usual" patches
AND
a mystery group of patches

Bonus points to anyone who can guess what the last group actually is before I release it.
_________________
There is no substitute for experience.
Imperfection indicates a lack of effort.
Back to top
View user's profile Send private message
Xithix
Apprentice
Apprentice


Joined: 31 Dec 2004
Posts: 228

PostPosted: Thu Jan 06, 2005 1:41 am    Post subject: Reply with quote

Clock Tick Rate (1000)

Should this be messed with?
Back to top
View user's profile Send private message
miseiler
Tux's lil' helper
Tux's lil' helper


Joined: 17 Mar 2003
Posts: 118

PostPosted: Thu Jan 06, 2005 1:53 am    Post subject: Reply with quote

Quote:
Clock Tick Rate (1000)


Not unless you're running a server or for some other reason desperately need to reduce kernel CPU overhead. Otherwise it'll needlessly slow down system response.
_________________
Cthulhu for president.
Back to top
View user's profile Send private message
Lepaca Kliffoth
l33t
l33t


Joined: 28 Apr 2004
Posts: 737
Location: Florence, Italy

PostPosted: Thu Jan 06, 2005 9:54 am    Post subject: Reply with quote

Code:
Linux Gamebox 2.6.10-nitro2 #1 Thu Jan 6 11:33:21 CET 2005 i686 Intel(R) Pentium(R) 4 CPU 2.66GHz GenuineIntel GNU/Linux


Thanks!!

edit: OUCH I've got a BIG problem here :( Using the "nv" driver, when I go back to the console from X the computer hangs. I can't even log in with ssh from my laptop :( Besides, if I use the nvidia binary drivers I can't even start X. Anyone knows what kind of problem this is? I'll experiment a bit while I wait for your answer. Thanks.
_________________
It isn't enough to win - everyone else must lose, and you also have to rub it in their face (maybe chop off an arm too for good measure).
Animebox!
Back to top
View user's profile Send private message
Arek75
n00b
n00b


Joined: 11 Nov 2004
Posts: 25

PostPosted: Thu Jan 06, 2005 3:00 pm    Post subject: Reply with quote

As a quick-fix, you could try enabling vesafb(-tng) in the kernel, and using the framebuffer X driver (fbdev). I have no idea what's causing X to hang on nv and/or not run on nvidia, tho. One thing to check: Make sure that the nvidia framebuffer is NOT enabled in the kernel (vesafb/vesafb-tng is OK, I use it myself right alongside nvidia). Last I knew, this could cause all sorts of problems.

Hope this helps. :D

--Arek75
Back to top
View user's profile Send private message
discomfitor
l33t
l33t


Joined: 21 Feb 2003
Posts: 927
Location: None

PostPosted: Thu Jan 06, 2005 5:21 pm    Post subject: Reply with quote

New nitro is out. Please use that unless you need win4lin (but I have a feeling that nitro3's win4lin will be fixed soon anyway :wink:).
_________________
There is no substitute for experience.
Imperfection indicates a lack of effort.
Back to top
View user's profile Send private message
Lepaca Kliffoth
l33t
l33t


Joined: 28 Apr 2004
Posts: 737
Location: Florence, Italy

PostPosted: Thu Jan 06, 2005 6:21 pm    Post subject: Reply with quote

I'll try the new nitro asap. I knew about framebuffers and the fact that the nvidia framebuffer tends to create problems so I tried disabling framebuffer entirely (I was already using vesafb-tng) or using vesafb but it simply seems this kernel won't work. I experienced the same problem long ago when vesafb-tng first came out. Disabling it, though, didn't get me anywhere, not then, not now. Since the other 2.6.10 based kernel I'm using works fine the problem's probably in one of the patches but as things are now I can't make any kind of bug search (nothing in the logs etc, I'm sure you know the story). Thanks anyway.
_________________
It isn't enough to win - everyone else must lose, and you also have to rub it in their face (maybe chop off an arm too for good measure).
Animebox!
Back to top
View user's profile Send private message
samonli
n00b
n00b


Joined: 06 Nov 2004
Posts: 29

PostPosted: Thu Jan 06, 2005 6:34 pm    Post subject: Win4lin error Reply with quote

I can't compile win4lin,what's wrong.Pls help me.thx!

if [ -r System.map ]; then /sbin/depmod -ae -F System.map 2.6.10-nitro3; fi
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol handle_mm_fault
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol sys_munmap
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol cpu_gdt_descr
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol sys_ftruncate
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol per_cpu__init_tss
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol mhi_void_hook
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol do_exit
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol pte_alloc_map
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol idt_descr
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol mhi_hooks
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol sys_mprotect
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol make_pages_present
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol idt_table
WARNING: /lib/modules/2.6.10-nitro3/kernel/arch/i386/mki-adapter26/mki-adapter.ko needs unknown symbol search_exception_tables
Back to top
View user's profile Send private message
Pink
Veteran
Veteran


Joined: 24 Jul 2003
Posts: 1062

PostPosted: Thu Jan 06, 2005 7:28 pm    Post subject: Reply with quote

samonli:

You may want to post that in the correct thread (this is for 2.6.10-nitro2, you are using 2.6.10-nitro3).

Also, when you go to the new nitro thread you will see that win4lin is broken (for whatever reason, you will have speak to Darkness about that).

HTH

edit: Just in case you are unable to search for it, here is the link.
Back to top
View user's profile Send private message
bollucks
l33t
l33t


Joined: 27 Oct 2004
Posts: 606

PostPosted: Fri Jan 07, 2005 8:52 am    Post subject: Reply with quote

feld wrote:
bollucks wrote:
yardbird wrote:
AFAIK Con Kolivas is aware of the problems and working to resolve them. There were some bugreports on the -ck mailing list too.

I follow the ck mailing list and as far as he knows the problem is limited to wine and cedega games or people renicing X to -ve values.


well someone should clue him in. I dont run Wine or Cedega nor do I renice X. Every kernel I've used that has all his stuff in breaks my sound in OpenAL games.


Something like this perhaps? Seems openAL uses OSS by default.

http://article.gmane.org/gmane.linux.kernel.ck/1805
Back to top
View user's profile Send private message
taipan67
l33t
l33t


Joined: 04 Dec 2004
Posts: 866
Location: England (i'm told...)

PostPosted: Sat Jan 08, 2005 9:25 am    Post subject: Reply with quote

Following on from my last post, which doesn't seem to have generated any feedback, i can now report that i've got a system running satisfactorily on a reiser4 root (/) partition.

Unfortunately, i did it by patching a gentoo-dev-sources kernel with the relevant patch from the namesys website. :oops:

I'd still like to get this nitro-kernel up & running, so the new question is:- Do i have to build the entire system with
Code:
ACCEPT_KEYWORDS="~x86"
...in order to avoid any package-incompatibilities?
_________________
"Anyone who goes to see a psychiatrist should have their head examined!"
Back to top
View user's profile Send private message
Benson
Apprentice
Apprentice


Joined: 23 Feb 2004
Posts: 156
Location: Switzerland

PostPosted: Sat Jan 08, 2005 11:34 am    Post subject: Reply with quote

taipan67 wrote:
I'd still like to get this nitro-kernel up & running, so the new question is:- Do i have to build the entire system with
Code:
ACCEPT_KEYWORDS="~x86"
...in order to avoid any package-incompatibilities?


If you want a stable system, don't emerge your system with ACCEPT_KEYWORDS="~x86, it'll mostly brake your system! Besides that, don't use that ACCEPT_KEYWORDS again, it's depreciated! Make a file called package.keywords in your /etc/portage/, and add packages (e.g.sys-kernel/gentoo-dev-sources ~x86 to unmask a package).

And what has your kernel to do with emerging the rest of the system? I don't see your problem. The kernel is a thing for itself, that's actually what you really can call Linux, and the other things are "Bonus"-Software - possibly they have some dependancies, but portage solves it for you!

rgds
Benson
Back to top
View user's profile Send private message
taipan67
l33t
l33t


Joined: 04 Dec 2004
Posts: 866
Location: England (i'm told...)

PostPosted: Sat Jan 08, 2005 11:48 am    Post subject: Reply with quote

As the earlier post that i linked to states, when i build a nitro2-kernel, udev (stable-release) no longer plays nice.

What with the patched dev-sources kernel working with udev as it ought to, i was trying to seek your collective insight into how to get nitro2 to work with the "bonus software" i build around it.

I'm unsure about portage handling the dependancies, as nitro-sources aren't part of the official tree. Any rule-of-thumb would be greatly appreciated, as this kernel sounds well worth the effort!
_________________
"Anyone who goes to see a psychiatrist should have their head examined!"
Back to top
View user's profile Send private message
Benson
Apprentice
Apprentice


Joined: 23 Feb 2004
Posts: 156
Location: Switzerland

PostPosted: Sat Jan 08, 2005 12:29 pm    Post subject: Reply with quote

Did you use udev before? Do you have sys-fs/udev emerged? Maybe you get some advices in the Documentation, Tipps & Tricks-Forum?!

Sorry, can't help at the moment further, since i don't use udev. As i'm very interessted in it, i may have a look at this udev thing later, maintainly because i want to give ivman a try...

rgds
Benson
Back to top
View user's profile Send private message
taipan67
l33t
l33t


Joined: 04 Dec 2004
Posts: 866
Location: England (i'm told...)

PostPosted: Sat Jan 08, 2005 1:27 pm    Post subject: Reply with quote

My initial installation was based on this 2.6 migration guide. Having had no end of fun with devfsd in the past, i absolutely love udev to bits. Everything just works!

If my last post sounded overly frustrated, it's because i've got 2 kernels that i can run in my reiser4 partition, 1 a patched 2.6.9-dev-sources that works just as the non-reiser4 one did. The other, a 2.6.10-nitro2, under which the same udev ceases to function as expected.

I'm assuming i've got an incompatibility issue, & am hoping to gain some insight from those on this thread who've got a happily-running system under nitro2.

For what it's worth, the installed version of udev is 045, but as i said earlier, some sort of guideline applicable to all packages would be my ideal... :D
_________________
"Anyone who goes to see a psychiatrist should have their head examined!"
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Unsupported Software All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6  Next
Page 5 of 6

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum