| View previous topic :: View next topic |
| Author |
Message |
TheCableMan
n00b
Joined: 19 Nov 2004
Posts: 32
|
 Posted: Wed Dec 01, 2004 6:46 pm Post subject: cdrecord |
 |
|
Jag kan inte bränna m.h.a cdrecord vad är fel?
| Code: | bash-2.05b# cdrecord -v dev=ATAPI:0,0,0 install-x86-minimal-2004.3-r1.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent default s.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
cdrecord: Warning: Running on Linux-2.6.9-gentoo-r6
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
cdrecord: Warning: SCSI transport does no longer work for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MSI '
Identifikation : 'CD-RW MS-8348 '
Revision : '140D'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
cdrecord: Input/output error. read buffer: scsi sendcmd: no error
CDB: 3C 00 00 00 00 00 00 FC 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
FIFO size : 4194304 = 4096 KB
Track 01: data 50 MB
Total size: 58 MB (05:45.02) = 25877 sectors
Lout start: 58 MB (05:47/02) = 25877 sectors
|
Scanbus säger:
| Code: | bash-2.05b# cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
cdrecord: Warning: Running on Linux-2.6.9-gentoo-r6
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes.
cdrecord: Warning: SCSI transport does no longer work for suid root programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'MSI ' 'CD-RW MS-8348 ' '140D' Removable CD-ROM
0,1,0 1) 'HL-DT-ST' 'DVD-ROM GDR8161B' '0100' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
bash-2.05b# |
|
|
| Back to top |
|
 |
keyson
l33t
Joined: 10 Jun 2003
Posts: 830
Location: Sweden
|
| Posted: Wed Dec 01, 2004 9:19 pm Post subject: |
|
|
Hej.
Det är lite förändringar när det gäller 2.6 kärnan.
Det är det som programmet säger
| Quote: |
cdrecord: There are unsettled issues with Linux-2.5 and newer.
|
Du får ta bort sudo biten på programmet samt sätta
dig i cdrw gruppen och se till att din cdrw device tillhör gruppen
cdrw.
Se detta forum.
https://forums.gentoo.org/viewtopic.php?t=247459
-Kjell |
|
| Back to top |
|
|
Fanatic
Apprentice
Joined: 02 May 2004
Posts: 173
Location: Stocktown
|
| Posted: Thu Dec 02, 2004 2:00 am Post subject: |
|
|
| Man behöver inte längre köra med dev=ATAPI:0,0,0 med ide-cd längre, nu är det dev=/dev/hdc (eller vad din cd-brännare nu ligger) som gäller. |
|
| Back to top |
|
|
TheCableMan
n00b
Joined: 19 Nov 2004
Posts: 32
|
| Posted: Thu Dec 02, 2004 6:24 pm Post subject: |
|
|
Ser vad det kan vara nu
bash-2.05b# ls -l /dev/hdc
lr-xr-xr-x 1 root cdrw 30 2 dec 19.15 /dev/hdc -> ide/host0/bus1/target0/lun0/cd
hur ändrar jag till
# ls -l /dev/hdc
brw-rw---- 1 root cdrw 22, 0 Nov 3 22:36 /dev/hdc ??? |
|
| Back to top |
|
|
Highlands
Guru
Joined: 22 Apr 2003
Posts: 366
Location: Sundsvall, Sweden
|
|
| Back to top |
|
|
TheCableMan
n00b
Joined: 19 Nov 2004
Posts: 32
|
| Posted: Fri Dec 03, 2004 5:34 pm Post subject: |
|
|
men det är ju det som inte funkar
| Code: | ls -l /dev/hdc
lr-xr-xr-x 1 root root 30 2 dec 21.31 /dev/hdc -> ide/host0/bus1/target0/lun0/cd |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Scandinavian
