View previous topic :: View next topic |
Author |
Message |
AlbertoSSj Tux's lil' helper
Joined: 21 Nov 2004 Posts: 135
|
Posted: Wed Nov 24, 2004 9:08 am Post subject: [Risolto] Please help a poor noob. X non vuole partire :( |
|
|
La scheda video è una ati radeon 9800pro
Non so più che fare per far girare X sulla Gentoo (sono alla prima installazione, quindi magari è colpa mia... ma ho veramente finito le idee)
Prima si piantava su questo errore
Code: |
Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices.
|
Eliminando il supporto framebuffer dal kernel e ricompilando ottengo questo (prima però si vede che X fa un tentativo di partire, si vede un pezzetto di schermo grigio)
Code: |
xinit
Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.6.9-gentoo-r4 i686 [ELF]
Current Operating System: Linux themaster 2.6.9-gentoo-r4 #8 SMP Wed Nov 24 09:59:37 CET 2004 i686
Build Date: 23 November 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 24 10:02:55 2004
(EE) Unable to locate/open config file
Using vt 7
xf86AutoConfig: Primary PCI is 2:0:0
Running "/usr/X11R6/bin/getconfig -X 60700000 -I /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig -v 0x1002 -d 0x4e48 -r 0x00 -s 0x1002 -b 0x0002 -c 0x0300"
getconfig.pl: Version 1.0.
getconfig.pl: Xorg Version: 6.7.0.0.
getconfig.pl: 23 built-in rules.
getconfig.pl: rules file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has version 1.0.
getconfig.pl: 1 rule added from file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
getconfig.pl: Evaluated 24 rules with 0 errors.
getconfig.pl: Weight of result is 500.
New driver is "ati"
(==) Using default built-in configuration (53 lines)
(WW) RADEON: No matching Device section for instance (BusID PCI:2:0:1) found
(EE) open /dev/fb0: No such file or directory
Symbol drmGetClient from module /usr/X11R6/lib/modules/drivers/radeon_drv.o is unresolved!
Could not init font path element /usr/share/fonts/Speedo/, removing from list!
Could not init font path element /usr/share/fonts/CID/, removing from list!
xterm: error while loading shared libraries: libXaw.so.8: cannot open shared object file: No such file or directory
xterm: error while loading shared libraries: libXaw.so.8: cannot open shared object file: No such file or directory
xterm: error while loading shared libraries: libXaw.so.8: cannot open shared object file: No such file or directory
waiting for X server to shut down
|
Last edited by AlbertoSSj on Wed Nov 24, 2004 9:51 am; edited 1 time in total |
|
Back to top |
|
|
randomaze Bodhisattva
Joined: 21 Oct 2003 Posts: 9985
|
Posted: Wed Nov 24, 2004 9:17 am Post subject: Re: Please help a poor noob. X non vuole partire :( |
|
|
AlbertoSSj wrote: | xterm: error while loading shared libraries: libXaw.so.8: cannot open shared object file: No such file or directory |
Ti mancano le Athena Widgets. Ma non cpaisco come mai... hai fatto un installazione GRP o da sorgenti?
Puoi fare un:
e scrivere l'output nel forum? _________________ Ciao da me! |
|
Back to top |
|
|
AlbertoSSj Tux's lil' helper
Joined: 21 Nov 2004 Posts: 135
|
Posted: Wed Nov 24, 2004 9:20 am Post subject: |
|
|
Veramente ho fatto emerge ati-driver, e si è anche installato x, posso vedere da emerge se sono già installate? |
|
Back to top |
|
|
gutter Bodhisattva
Joined: 13 Mar 2004 Posts: 7162 Location: Aarau, Aargau, Switzerland
|
Posted: Wed Nov 24, 2004 9:24 am Post subject: |
|
|
AlbertoSSj wrote: | Veramente ho fatto emerge ati-driver, e si è anche installato x, posso vedere da emerge se sono già installate? |
Con il comando che ti ha postato prima randomaze _________________ Registered as User #281564 and Machines #163761 |
|
Back to top |
|
|
AlbertoSSj Tux's lil' helper
Joined: 21 Nov 2004 Posts: 135
|
Posted: Wed Nov 24, 2004 9:29 am Post subject: |
|
|
FUNZIONA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
GRAZIE GRAZIE GRAZIE GRAZIE
Sono comosso
Si vede una schifezza ma va bene cosi per ora
Posso abusaredella vostra pazienza ancora un po?
Ecco, quando ho fatto lspci dal cd di installazione di gentoo mi è venuta fuori questa schermata (che avevo salvato per configurare il kernel)
Code: |
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:0b.0 RAID bus controller: CMD Technology Inc Silicon Image SiI 3112 SATARaid Controller (rev 02)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800]
0000:02:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800] (Secondary)
|
Con le informazioni tutte corrette.
Adesso quando faccio lspci ottengo questo
Code: |
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 01e0 (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation: Unknown device 01eb (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation: Unknown device 01ee (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation: Unknown device 01ed (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation: Unknown device 01ec (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation: Unknown device 01ef (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 0060 (rev a4)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 0067 (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 0067 (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 0068 (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation: Unknown device 0066 (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation: Unknown device 006c (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation: Unknown device 0065 (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation: Unknown device 006e (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation: Unknown device 01e8 (rev c1)
0000:01:0b.0 RAID bus controller: CMD Technology Inc: Unknown device 3112 (rev 02)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 4e48
0000:02:00.1 Display controller: ATI Technologies Inc: Unknown device 4e68
|
Posso sopravvivere se il resto funziona, ma xchè lo fa? |
|
Back to top |
|
|
gutter Bodhisattva
Joined: 13 Mar 2004 Posts: 7162 Location: Aarau, Aargau, Switzerland
|
Posted: Wed Nov 24, 2004 9:44 am Post subject: |
|
|
Altra domanda altro topic
Metti il tag risolto e aprine uno nuovo. _________________ Registered as User #281564 and Machines #163761 |
|
Back to top |
|
|
randomaze Bodhisattva
Joined: 21 Oct 2003 Posts: 9985
|
Posted: Wed Nov 24, 2004 10:03 am Post subject: |
|
|
AlbertoSSj wrote: | FUNZIONA!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
Bene, magari se posti il procedimento seguito sei di aiuto ad altri che, in futuro potrebbero incontrare un problema simile al tuo
Poi, come ha detto gutter, altra domanda altro topic _________________ Ciao da me! |
|
Back to top |
|
|
gutter Bodhisattva
Joined: 13 Mar 2004 Posts: 7162 Location: Aarau, Aargau, Switzerland
|
Posted: Wed Nov 24, 2004 10:06 am Post subject: |
|
|
randomaze wrote: |
[CUT]
Bene, magari se posti il procedimento seguito sei di aiuto ad altri che, in futuro potrebbero incontrare un problema simile al tuo
[CUT]
|
Penso che abbia emerso le librerie che gli hai consigliato tu. Vediamo se ce lo conferma.
randomaze wrote: |
[CUT]
Poi, come ha detto gutter, altra domanda altro topic |
Cerco di essere d'aiuto per mantenere un certo ordine _________________ Registered as User #281564 and Machines #163761 |
|
Back to top |
|
|
AlbertoSSj Tux's lil' helper
Joined: 21 Nov 2004 Posts: 135
|
Posted: Wed Nov 24, 2004 10:24 am Post subject: |
|
|
Si, ho emerso le librerie
Credo che ci sia qualche problema con X però, nfati ora partte ma lo schermo viene disegnato fuori dallo "schermo", diciamo che il 60% si vede il resto scompare in basso a sinistra, nemmeno provando coi comandi del monitor si riesce a rendere tutto visibile.
In più lo schermo segnala che la risoluzione attiva è "NESSUNA RISOLUZIONE".
Ho provato a modificare i paramentri dello schermo prendendo ddcxinfo-knoppix
Code: |
emerge sys-apps/ddcxinfo-knoppix
|
e con
Code: |
ddcxinfo-knoppix -monitor
|
Ma mettendoli dentro /etc/X11/XF86Config-4 non è cambiato nulla, a questo punto mi chiedo se X si sia installato completamente, oppure mi sono perso dei pezzi nel download? |
|
Back to top |
|
|
AlbertoSSj Tux's lil' helper
Joined: 21 Nov 2004 Posts: 135
|
Posted: Wed Nov 24, 2004 10:45 am Post subject: |
|
|
Risolto anche questo, era una stupidagine.
i settaggi di X non vanno in
/etc/X11/XF86Config-4
ma in
/etc/X11/xorg.conf
Il tool dell'ati per configurare X però è sbagliato..... |
|
Back to top |
|
|
randomaze Bodhisattva
Joined: 21 Oct 2003 Posts: 9985
|
Posted: Wed Nov 24, 2004 10:47 am Post subject: |
|
|
AlbertoSSj wrote: | il resto scompare in basso a sinistra, nemmeno provando coi comandi del monitor si riesce a rendere tutto visibile.
|
Hai provato ad andare con il mouse nella parte di schermo che non si vede? Se suppongo giusto dovrebbe muovere la zona visibile.
Se é così posta la sezione monitor del tuo Xorg.conf.... _________________ Ciao da me! |
|
Back to top |
|
|
AlbertoSSj Tux's lil' helper
Joined: 21 Nov 2004 Posts: 135
|
Posted: Wed Nov 24, 2004 11:12 am Post subject: |
|
|
Adesso funziona.
La configurazione corretta del monitor lo presa come ho detto prima col comando
ddcxinfo-knoppix -monitor
Era laconfigurazione base di xorg.conf che dave errore
Una nota a chi volesse usare ddcxinfo-knoppix, questo fa il probe corretto di TUTTE le modalità dello schermo, mettendole tutte X potrebbe metterci davvero tanto a partire.
Io per esempio alla fine ho messo solo
Code: |
Section "Monitor"
Identifier "Monitor0"
VendorName "PHL"
ModelName "PHL000e"
HorizSync 30 - 92 # DDC-probed
VertRefresh 50 - 160 # DDC-probed
Option "dpms"
# These are the DDC-probed settings reported by your monitor.
# 1600x1200, 70.0Hz; hfreq=87.50, vfreq=70.00
ModeLine "1600x1200" 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1280x1024, 85.0Hz; hfreq=91.15, vfreq=85.02
ModeLine "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1280x960, 85.0Hz; hfreq=85.40, vfreq=85.00
ModeLine "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1600x1200, 70.0Hz; hfreq=87.50, vfreq=70.00
ModeLine "1600x1200" 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1280x1024, 85.0Hz; hfreq=91.15, vfreq=85.02
ModeLine "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1280x960, 85.0Hz; hfreq=85.40, vfreq=85.00
ModeLine "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 800x600, 85.0Hz; hfreq=53.67, vfreq=85.06
ModeLine "800x600" 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
#EndSection
|
In questo modo parte subito con lo schermo sempre a 85Hz |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|