| View previous topic :: View next topic |
| Author |
Message |
chiapil
n00b
Joined: 11 Oct 2004
Posts: 27
Location: Oristano
|
 Posted: Sun Nov 14, 2004 2:11 pm Post subject: problems with Xorg |
 |
|
Ciao!
When I start X, the screen is divided in 3 sections:
| =======================|====|
|...................................................... |.......|
|...................................................... |.......|
|...................................................... |.......|
|............ A..................................... |..C..|
|...................................................... |.......|
|...................................................... |.......|
|========================|.......|
|..............B......................................|....... |
|======================= |====|
In A there is fluxbox that seems work perfectly.
In B there is the taller part of A, and in C there are many coloured vertical lines.
The mouse can't work on B and C because A is considered as the maximum size of screen.
I think there is no hardware problem because when I'm not on X all works fine.
I've re-installed Gentoo yesterday (but the problem there was also here), therefore I've the newest version of all is needed.
this is my xorg.conf | Code: |
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
# FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbModel" "dell101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
Option "ZAxis Mapping" "4 5"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Generic Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
#31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50 - 70
#50-70
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
#Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
#EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
Option "NoLogo" "true"
Option "NvAGP" "3"
Option "RenderAccel" "true"
#VideoRam 32768
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
#Virtual 1600 1200
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection |
What's happened???
is this a new feature to give me a pretty free space to put post-it ????
Someone can help me?
Thanks! |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 55454
Location: 56N 3W
|
| Posted: Sun Nov 14, 2004 4:25 pm Post subject: |
|
|
chiapil,
What display do you have (make and part number)?
Where did you get | Quote: | HorizSync 31.5 - 64.3
VertRefresh 50 - 70 |
from?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
chiapil
n00b
Joined: 11 Oct 2004
Posts: 27
Location: Oristano
|
| Posted: Sun Nov 14, 2004 6:58 pm Post subject: |
|
|
Really, I dont'know....but I 've not changed it and before the update of nvidia-kernel 1.06629 and nvidia-glx 1.06629 all worked fine.
Where I can found the exactly value?
What do you mean for make and part number?
My laptop is a dell inspiron 8200
monitor:
Type (active-matrix TFT) UXGA
Height 228.1 mm (9.0 inches)
Width 304.1 mm (12.0 inches)
Diagonal 308.1 mm ( 15 inches)
Maximum resolution 1600x1200 at 16.8 million colors
Refresh rate 60 Hz
thanks a lot! |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 55454
Location: 56N 3W
|
| Posted: Sun Nov 14, 2004 8:32 pm Post subject: |
|
|
chiapil,
OK I didn't know you had a laptop.
Can you post the xorg startup log /var/log/Xorg.0.log please.
For a TFT, your HorizSync and VertRefresh look a bit strange.
You log will tell the story.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
chiapil
n00b
Joined: 11 Oct 2004
Posts: 27
Location: Oristano
|
| Posted: Sun Nov 14, 2004 8:38 pm Post subject: |
|
|
this is the Xorg.0.log
| Code: | X Window System Version 6.8.0
Release Date: 8 September 2004
X Protocol Version 11, Revision 0, Release 6.8
Build Operating System: Linux 2.6.9-gentoo-r3 i686 [ELF]
Current Operating System: Linux gargamella 2.6.9-gentoo-r3 #5 SMP Sun Nov 14 15:42:24 CET 2004 i686
Build Date: 14 November 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 14 21:34:17 2004
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2482 card 8086,4541 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:2: chip 8086,2487 card 8086,4541 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 8086,4541 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 1013,5959 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2486 card 14f1,5421 rev 02 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0174 card 1028,00d4 rev a3 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 10b7,9200 card 1028,00d4 rev 78 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 104c,ac42 card 4000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 104c,ac42 card 4800,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 02:01:2: chip 104c,8027 card 1028,00d4 rev 00 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,16), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[B]
[1] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[2] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[3] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[4] -1 0 0x0000f000 - 0x0000f0ff (0x100) IX[B]
[5] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[6] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[7] -1 0 0x0000fc00 - 0x0000fcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf4000000 - 0xfbffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:1:1), (2,7,10), BCTRL: 0x05c0 (VGA_EN is cleared)
(--) PCI:*(1:0:0) nVidia Corporation NV17 [GeForce4 440 Go] rev 163, Mem @ 0xfc000000/24, 0xe0000000/27, 0xdff80000/19, BIOS @ 0x80000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe8000000 from 0xebffffff to 0xe7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[2] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[3] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[4] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[5] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[6] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[10] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[12] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[14] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[15] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[16] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[17] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[20] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[1] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[2] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[3] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[4] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[5] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[6] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[7] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[8] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[9] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[10] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[11] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[12] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[14] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[15] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[16] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[17] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[19] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[20] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[7] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[8] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[10] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[11] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[18] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[19] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[21] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[23] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[27] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[7] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[8] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[10] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[11] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[18] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[19] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[21] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[22] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[23] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[24] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[26] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[27] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[6] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[7] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[8] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[9] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[10] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[11] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[20] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[21] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[22] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[25] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[26] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[29] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[30] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "NvAGP" "3"
(**) NVIDIA(0): Option "RenderAccel" "true"
(**) NVIDIA(0): Enabling experimental RENDER acceleration
(--) NVIDIA(0): Linear framebuffer at 0xE0000000
(--) NVIDIA(0): MMIO registers at 0xFC000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 440 Go
(--) NVIDIA(0): VideoBIOS: 04.17.00.55.b2
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) NVIDIA(0): Generic Monitor: Using hsync range of 30.00-64.00 kHz
(II) NVIDIA(0): Generic Monitor: Using vrefresh value of 60.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "416x312" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using mode "1600x1200" (no mode of this name)
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (320, 240) mm
(--) NVIDIA(0): DPI set to (101, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xdff80000 - 0xdfffffff (0x80000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xf8ff8000 - 0xf8ffbfff (0x4000) MX[B]
[9] -1 0 0xf8fff000 - 0xf8fff7ff (0x800) MX[B]
[10] -1 0 0xf8fffc00 - 0xf8fffc7f (0x80) MX[B]
[11] -1 0 0x20000000 - 0x200003ff (0x400) MX[B]
[12] -1 0 0xe8000000 - 0xe7ffffff (0x0) MX[B]O
[13] -1 0 0x80000000 - 0x8001ffff (0x20000) MX[B](B)
[14] -1 0 0xdff80000 - 0xdfffffff (0x80000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000ec80 - 0x0000ecff (0x80) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[24] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[25] -1 0 0x0000dc80 - 0x0000dcbf (0x40) IX[B]
[26] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[27] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[B]
[28] -1 0 0x00000374 - 0x00000374 (0x1) IX[B]
[29] -1 0 0x00000170 - 0x00000170 (0x1) IX[B]
[30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[B]
[31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
[32] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[B]
[33] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[B]
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "dell101"
(**) Keyboard1: XkbModel: "dell101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Kernel Input Handler" (type: Other)
(II) Mouse1: ps2EnableDataReporting: succeeded
|
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 55454
Location: 56N 3W
|
| Posted: Sun Nov 14, 2004 9:21 pm Post subject: |
|
|
chiapil,
It says that its not using 1600 x 1200 then lists all the modes it is using. Its defaulting to "1280x1024". Its also taking care of your strange refresh rates (not quoted).
| Quote: | (II) NVIDIA(0): Not using mode "1600x1200" (no mode of this name)
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 |
1600X1200 is a VESA standard mode, so it doesn't need a special mode line and should be used if your hardware is capable of it.
Have you got a typo in the | Quote: | | Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480" |
line in your xorg.conf, in the "1600x1200" bit?
e.g. letter O not numeral 0.
You can also try removing (commenting out) the HorizSync and VertRefresh lines. X will ask the hardware what it can do.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
chiapil
n00b
Joined: 11 Oct 2004
Posts: 27
Location: Oristano
|
| Posted: Sun Nov 14, 2004 9:43 pm Post subject: |
|
|
I've tried to comment these lines but it's the same.
My card support 1600x1200 resolution in fact i've not a line called typo.
i've remove from kernel the vesafb settings (1600x1200) because with this problem when I launch X move between tty take a long time (about 5 sec)....
Another idea....pleaseeeeee! |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
