| View previous topic :: View next topic |
| Author |
Message |
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
 Posted: Sun Nov 10, 2002 8:54 pm Post subject: Probleme mit der XF86config |
 |
|
Hallo zusammen.
Ich habe versucht, die X-Configuration gemäs der Anleitung http://www.gentoo.org/doc/de/desktop.xml zu machen. Ich bin aber mit diesem Konfigurationstool nicht zurechtgekommen. Jetzt habe ich einfach die Konfigurationsdatei meines (auf dem gleichen Rechner installierten) Mandrake genommen. Ich habe angenommen, dass das nicht sofort funktionieren würde  Nun werde ich aber aus der Fehlermeldung | Code: | Data incomplete in file: "/etc/X11/XF86Config
Device Section "device1" must have a Driver line. |
nicht schlau.
Bei mir sieht das so aus in der XF86Config: | Code: | ...
Section "Device"
Identifier "device1"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce2 DDR (generic)"
Chipset "GeForce DDR"
Option "power_saver"
EndSection
Section "Screen"
Driver "svga"
Device "device1"
Monitor "moitor1"
... |
Kann mir jemand helfen und sagen, wo der Fehler liegt?
Vielen Dank
MFG Thomas |
|
| Back to top |
|
 |
kl@us
n00b
Joined: 21 Aug 2002
Posts: 45
Location: Germany / Schwerte
|
| Posted: Sun Nov 10, 2002 9:20 pm Post subject: |
|
|
Hi,
lies das:
>>Section "Device"
Identifier "NVIDIA GeForce4"
Driver "nvidia"
#Option "IgnoreEDID" "1"
#Option "ConnectedMonitor" "crt"
#Option "NoLogo" "1"
Option "CursorShadow" "true"
Option "CursorShadowAlpha" "60"
Option "CursorShadowXOffset" "2"
Option "CursorShadowYOffset" "2"
#VideoRam 131072
# Insert Clocks lines here if appropriate <<
Du hast keine "Driver Zeile" Driver "nvidia"
Gruß Klaus
_________________
"warum heissen eigentlich alle frauen mit nachnamen jpg ?" [Frage an das Internet Orakel] |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Sun Nov 10, 2002 9:25 pm Post subject: |
|
|
ok soweit gut: | Code: | | Failed to load module "nvidia" (module does not exist, 0) |
Woher krieg ich das Modul? Muss ich das in der Kernelkonfiguration machen, oder muss ich da was emergen? |
|
| Back to top |
|
|
kl@us
n00b
Joined: 21 Aug 2002
Posts: 45
Location: Germany / Schwerte
|
| Posted: Sun Nov 10, 2002 9:32 pm Post subject: |
|
|
| KillaChief wrote: | ok soweit gut: | Code: | | Failed to load module "nvidia" (module does not exist, 0) |
Woher krieg ich das Modul? Muss ich das in der Kernelkonfiguration machen, oder muss ich da was emergen? |
folgendes:
cd /usr/portage
emerge nvidia-kernel
emerge nvidia-glx
Klaus
_________________
"warum heissen eigentlich alle frauen mit nachnamen jpg ?" [Frage an das Internet Orakel] |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Sun Nov 10, 2002 9:33 pm Post subject: |
|
|
| und anschliessend? |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Sun Nov 10, 2002 9:38 pm Post subject: |
|
|
sory rtfm ich weiss
In der oben erwähnten nleitung steht: | Code: | # emerge media-video/nvidia-kernel media-video/nvidia-glx
# nano -w /etc/X11/XF86Config
# echo NVdriver >> /etc/modules.autoload
|
GLX in /etc/X11/XF86Config einschalten | Code: |
Section "Module"
# This loads the GLX module
# Load "glx" (Das # in dieser Zeile entfernen)
|
stimmt doch so oder? |
|
| Back to top |
|
|
ajordan
Guru
Joined: 10 Sep 2002
Posts: 320
Location: Hannover / Germany
|
|
| Back to top |
|
|
kl@us
n00b
Joined: 21 Aug 2002
Posts: 45
Location: Germany / Schwerte
|
| Posted: Sun Nov 10, 2002 9:43 pm Post subject: |
|
|
nano -w /etc/modules.autoload
#nur eine weitere Zeile
NVdriver
speichern, Neustart.
Eventuell musst Du Deinen Kernel noch einmal compilieren.
Klaus
_________________
"warum heissen eigentlich alle frauen mit nachnamen jpg ?" [Frage an das Internet Orakel] |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Sun Nov 10, 2002 9:45 pm Post subject: |
|
|
Der Fontpath stimmt bei mir noch nicht. | Code: | Section "Files"
FontPath "?"
EndSection |
Was muss da hin? |
|
| Back to top |
|
|
kl@us
n00b
Joined: 21 Aug 2002
Posts: 45
Location: Germany / Schwerte
|
| Posted: Sun Nov 10, 2002 9:52 pm Post subject: |
|
|
| KillaChief wrote: | Der Fontpath stimmt bei mir noch nicht. | Code: | Section "Files"
FontPath "?"
EndSection |
Was muss da hin? |
Ok, hier ist meine; nimm was Du brauchst
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
# Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc102"
Option "XkbLayout" "de"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Resolution" "900"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Samtron95P"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "NVIDIA GeForce4"
Driver "nvidia"
#Option "IgnoreEDID" "1"
#Option "ConnectedMonitor" "crt"
#Option "NoLogo" "1"
Option "CursorShadow" "true"
Option "CursorShadowAlpha" "60"
Option "CursorShadowXOffset" "2"
Option "CursorShadowYOffset" "2"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce4"
Monitor "Samtron95P"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1400x1050" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "14000x1050" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
_________________
"warum heissen eigentlich alle frauen mit nachnamen jpg ?" [Frage an das Internet Orakel] |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Sun Nov 10, 2002 10:22 pm Post subject: |
|
|
Vielen Dank. Du bist sehr spendabel 
 Es hat aber genütz.
Vielen Dank  |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Sun Nov 10, 2002 10:42 pm Post subject: |
|
|
Tja... Ich weiss, langsam werd ich lästig
Aber: Wie krieg ich unter KDE die Auflösung von 800x600 auf 1024x768? |
|
| Back to top |
|
|
Gekko
l33t
Joined: 29 Oct 2002
Posts: 773
|
| Posted: Mon Nov 11, 2002 2:09 am Post subject: |
|
|
Editiere einfach deine XF86Config so, dass default 1024x768 ist
| Code: | Subsection "Display"
Depth 8
Modes "1400x1050" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "14000x1050" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600"
ViewPort 0 0
EndSubsection |
Bei ihm ist z.B. 1400x1050 default
Du musst dort 1024x768 reinsetzten, falls Du das als Standardwert haben willst.
Andere Möglichkeit: mittels ich glaub strg+alt & + oder - (vom nummernblock) zum durchswitchen der Auflösungen. |
|
| Back to top |
|
|
KillaChief
n00b
Joined: 08 Nov 2002
Posts: 37
Location: Bern / Switzerland
|
| Posted: Mon Nov 11, 2002 5:01 pm Post subject: |
|
|
Sorry, Falscher Alarm. Es war schon 1024x768. Es waren unter KDE einfach die Icons zu gross eingestellt. Dadurch erschien das ganze als 800x600  |
|
| Back to top |
|
|
|
Deutsches Forum (German)
