| View previous topic :: View next topic |
| Author |
Message |
Remillard
Apprentice
Joined: 07 Mar 2003
Posts: 200
Location: Irvine, CA
|
 Posted: Tue Jul 27, 2004 5:33 am Post subject: Apache and VHOST |
 |
|
Hello,
I reviewed the information in a forum search on this, and even after implementing it, I'm still getting something wrong.
I'm trying to set up some virtual hosts just for local development and testing. I have localhost and I'd like that to remain a more or less pristine environment (it still has all the international Apache index.html files in it currently). I have a second virtual host document root that just consists of htdocs and an index.html file that says "Hi, Mom!"
So, onto the gory details.
In /etc/apache2/conf/vhosts/vhosts.conf:
| Code: |
NameVirtualHost *:80
<VirtualHost *>
ServerName localhost
DocumentRoot /var/www/localhost
</VirtualHost>
<VirtualHost *>
ServerName gyldenholt
DocumentRoot /var/www/gyldenholt
</VirtualHost>
|
I have gyldenholt in my /etc/hosts file resolving to 127.0.0.1, otherwise Firefox does a search and resolves to www.gyldenholt.org, which is not what I want.
In commonapache2.conf, I verified that I have "UseCanonicalName Off" set.
In apache2.conf, I have the line that includes conf/vhosts/vhosts.conf uncommented.
If I UNCOMMENT this line, everything resolves to /var/www/localhost/htdocs/index.html, even the gyldenholt address. So I'm relatively sure the basic setup is working alright.
I do not have ./htdocs listed in the VirtualHosts up above, because as far as I can tell, from /etc/vhosts/webapp-config, the server EXPECTS htdocs automatically, so I didn't add it.
Currently for localhost and gyldenholt, I get a 403 Forbidden error.
Any ideas out there? Like I said, the stuff in the forums had good info, and is probably preventing other problems, but I haven't figured this one out yet.
Regards,
Remillard
_________________
This signature is printed with 100% post-consumer recycled electrons. |
|
| Back to top |
|
 |
nobspangle
Veteran
Joined: 23 Mar 2004
Posts: 1318
Location: Manchester, UK
|
| Posted: Tue Jul 27, 2004 9:37 am Post subject: |
|
|
you need to set permissions in commonapache2.conf like this
| Code: | <Directory /var/www/localhost/>
Options -Indexes FollowSymLinks MultiViews
AllowOverride All
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /var/www/gyldenholt/>
Options -Indexes FollowSymLinks MultiViews
AllowOverride All
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory> |
Also make sure your files and directories have the right permissions, files need to be at least r-- and directories need r-x for the apache user |
|
| Back to top |
|
|
HydroSan
l33t
Joined: 04 Mar 2004
Posts: 764
Location: The Kremlin (aka Canada)
|
| Posted: Tue Jul 27, 2004 10:16 am Post subject: Re: Apache and VHOST |
|
|
| Remillard wrote: | | I do not have ./htdocs listed in the VirtualHosts up above, because as far as I can tell, from /etc/vhosts/webapp-config, the server EXPECTS htdocs automatically, so I didn't add it. |
I don't know, but try adding /htdocs anyhow and see if that works.
_________________
I was a Gangster for Capitalism, by Major General Smedley Butler.
Server status: Currently down, being replaced with fresh install - 20% completed. |
|
| Back to top |
|
|
placeholder
Advocate
Joined: 07 Feb 2004
Posts: 2500
|
| Posted: Tue Jul 27, 2004 10:28 am Post subject: |
|
|
Try...
| Code: | | chmod a+r /var/www/gyldenholt/ -R |
...and see if that does any good. |
|
| Back to top |
|
|
Remillard
Apprentice
Joined: 07 Mar 2003
Posts: 200
Location: Irvine, CA
|
| Posted: Tue Jul 27, 2004 5:35 pm Post subject: |
|
|
Alright. I've tried the things suggested, but haven't had any luck. I still get incorrect behavior. Here's what I did.
1) I modified commonapache2.conf as nobspangle recommended.
2) I verified the /var/www directories all had read access ("chmod -R a+r *" at /var/www)
At this point, http://localhost/ and http://gyldenholt/ would both bring up a 403 Forbidden error.
3) I went into vhosts.conf and added /htdocs to the direcotory names.
At this point, both http://localhost and http://gyldenholt now serve the index.html file that is in /var/www/localhost/htdocs. I get no differentiation between them.
I will post the totality of apache2.conf, commonapache2.conf, vhosts.conf, and webapps-config and maybe something will jump out at a reader (a code mugging if you will.)
apache2.conf
| Code: |
### /etc/apache2/conf/apache2.conf
### $Id: apache2.conf,v 1.1 2004/03/22 21:17:57 stuart Exp $
###
### Main Configuration Section
### You really shouldn't change these settings unless you're a guru
###
ServerRoot /usr/lib/apache2
#ServerName localhost
#LockFile /etc/apache2/apache2.lock
PidFile /var/run/apache2.pid
ErrorLog logs/error_log
LogLevel warn
DocumentRoot /var/www/localhost/htdocs |
I just noticed this reviewing the post. Is it possible that this DocumentRoot is overriding all the others??
apache2.conf continued
| Code: |
### Dynamic Shared Object (DSO) Support
###
### You should always leave these three, as they are needed for normal use.
### mod_access (Order, Allow, etc..)
### mod_log_config (Transferlog, etc..)
### mod_mime (AddType, etc...)
###
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule mime_module modules/mod_mime.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
###
### New Modules for 2.0 (some are experimental)
###
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule echo_module modules/mod_echo.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule case_filter_module modules/mod_case_filter.so
LoadModule case_filter_in_module modules/mod_case_filter_in.so
LoadModule deflate_module modules/mod_deflate.so
#LoadModule optional_hook_export_module modules/mod_optional_hook_export.so
#LoadModule optional_hook_import_module modules/mod_optional_hook_import.so
#LoadModule optional_fn_import_module modules/mod_optional_fn_import.so
#LoadModule optional_fn_export_module modules/mod_optional_fn_export.so
#LoadModule bucketeer_module modules/mod_bucketeer.so
LoadModule logio_module modules/mod_logio.so
###
### Global Configuration
###
# Splitting up apache2.conf into two files makes it easier to support
# multiple configurations on the same serer. In commonapache2.conf
# you keep directives that apply to all implementations and in this
# file you keep server-specific directives. While we don't yet have
# multiple configurations out-of-the-box, this allows us to do that
# in the future easily. (PERLPROXIED *ahem*)
#
# For Apache2 we load all conf files in conf/modules.d
Include conf/modules.d/*.conf
Include conf/commonapache2.conf
###
### IP Address/Port
###
#BindAddress *
Listen 80
###
### Log configuration Section
###
<IfModule mod_log_config.c>
#Single logfile with access, agent and referer information
#This is the default, if vlogs are not defined for the main server
CustomLog logs/access_log combined env=!VLOG
#If VLOG is defined in conf/vhosts/vhosts.conf, we use this entry
#CustomLog "|/usr/sbin/apache2splitlogfile" vhost env=VLOG
</IfModule>
###
### Virtual Hosts
###
# We include different templates for Virtual Hosting. Have a look in the
# vhosts directory and modify to suit your needs.
Include conf/vhosts/vhosts.conf
#Include conf/vhosts/dynamic-vhosts.conf
#Include conf/vhosts/virtual-homepages.conf
###
# Including this as a way to tinker with user html files
UserDir public_html
###
### Performance settings Section
###
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
# prefork MPM [THIS IS THE DEFAULT]
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule prefork.c>
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestsPerChild 0
</IfModule>
# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
# perchild MPM
# NumServers: constant number of server processes
# StartThreads: initial number of worker threads in each server process
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# MaxThreadsPerChild: maximum number of worker threads in each server process
# MaxRequestsPerChild: maximum number of connections per server process
<IfModule perchild.c>
NumServers 5
StartThreads 5
MinSpareThreads 5
MaxSpareThreads 10
MaxThreadsPerChild 20
MaxRequestsPerChild 0
</IfModule>
|
commonapache2.conf
| Code: |
### /etc/apache2/conf/commonapache2.conf
### $Id: commonapache2.conf,v 1.5 2004/07/08 16:27:12 zul Exp $
###
### Common server configuration.
###
User apache
Group apache
###
### ServerAdmin: Your address, where problems with the server should be
### e-mailed. This address appears on some server-generated pages, such
### as error documents.
###
ServerAdmin root@localhost
###
### DocumentRoot: The directory out of which you will serve your
### documents. By default, all requests are taken from this directory, but
### symbolic links and aliases may be used to point to other locations.
### DO NOT MODIFY THIS ONE, USE apache2.conf.
###
#DocumentRoot /var/www/localhost/htdocs
###
### Each directory to which Apache has access, can be configured with respect
### to which services and features are allowed and/or disabled in that
### directory (and its subdirectories).
###
### First, we configure the "default" to be a very restrictive set of
### permissions. Also, for security, we disable indexes globally.
###
### Restricted set of options:
###
<Directory />
Options -All -Multiviews
AllowOverride None
<IfModule mod_access.c>
Order deny,allow
Deny from all
</IfModule>
</Directory>
###
### Note that from this point forward you must specifically allow
### particular features to be enabled - so if something's not working as
### you might expect, make sure that you have specifically enabled it
### below.
###
<Directory /var/www/localhost/htdocs>
Options -Indexes FollowSymLinks MultiViews
AllowOverride All
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /var/www/gyldenholt/htdocs>
Options -Indexes FollowSymLinks MultiViews
AllowOverride All
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
###
### UserDir: The name of the directory which is appended onto a user's home
### directory if a ~user request is received.
###
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
###
### DirectoryIndex: Name of the file or files to use as a pre-written HTML
### directory index. Separate multiple entries with spaces.
###
<IfModule mod_dir.c>
DirectoryIndex index.html index.html.var index.php index.php3 index.shtml index.cgi index.pl index.htm Default.htm default.htm
</IfModule>
###
### AccessFileName: The name of the file to look for in each directory
### for access control information.
###
AccessFileName .htaccess
###
### The following lines prevent .htaccess files from being viewed by
### Web clients. Since .htaccess files often contain authorization
### information, access is disallowed for security reasons. Comment
### these lines out if you want Web visitors to see the contents of
### .htaccess files. If you change the AccessFileName directive above,
### be sure to make the corresponding changes here.
###
### Also, folks tend to use names such as .htpasswd for password
### files, so this will protect those as well.
###
<IfModule mod_access.c>
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
</IfModule>
###
### CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
### document that was negotiated on the basis of content. This asks proxy
### servers not to cache the document. Uncommenting the following line disables
### this behavior, and proxies will be allowed to cache the documents.
###
#CacheNegotiatedDocs
###
### UseCanonicalName: (new for 1.3) With this setting turned on, whenever
### Apache needs to construct a self-referencing URL (a URL that refers back
### to the server the response is coming from) it will use ServerName and
### Port to form a "canonical" name. With this setting off, Apache will
### use the hostname:port that the client supplied, when possible. This
### also affects SERVER_NAME and SERVER_PORT in CGI scripts.
###
UseCanonicalName Off
###
### TypesConfig describes where the mime.types file (or equivalent) is
### to be found.
###
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
###
### DefaultType is the default MIME type the server will use for a document
### if it cannot otherwise determine one, such as from filename extensions.
### If your server contains mostly text or HTML documents, "text/plain" is
### a good value. If most of your content is binary, such as applications
### or images, you may want to use "application/octet-stream" instead to
### keep browsers from trying to display binary files as text.
###
DefaultType text/plain
###
### The mod_mime_magic module allows the server to use various hints from the
### contents of the file itself to determine its type. The MIMEMagicFile
### directive tells the module where the hint definitions are located.
### mod_mime_magic is not part of the default server (you have to add
### it yourself with a LoadModule [see the DSO paragraph in the 'Global
### Environment' section], or recompile the server and include mod_mime_magic
### as part of the configuration), so it's enclosed in an <IfModule> container.
### This means that the MIMEMagicFile directive will only be processed if the
### module is part of the server.
###
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
###
### HostnameLookups: Log the names of clients or just their IP addresses
### e.g., www.apache.org (on) or 204.62.129.132 (off).
### The default is off because it'd be overall better for the net if people
### had to knowingly turn this feature on, since enabling it means that
### each client request will result in AT LEAST one lookup request to the
### nameserver.
###
HostnameLookups Off
###
### EnableMMAP: Control whether memory-mapping is used to deliver
### files (assuming that the underlying OS supports it).
### The default is on; turn this off if you serve from NFS-mounted
### filesystems. On some systems, turning it off (regardless of
### filesystem) can improve performance; for details, please see
### http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
###
EnableMMAP on
###
### The following directives define some format nicknames for use with
### a CustomLog directive (see below).
###
<IfModule mod_log_config.c>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
LogFormat "%v %h %l %u %t \"%r\" %>s %b %T" script
LogFormat "%v %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" VLOG=%{VLOG}e" vhost
<IfModule mod_logio.c>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
#CustomLog logs/access_log common
#
# If you would like to have agent and referer logfiles, uncomment these
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent
#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access_log combined
#
</IfModule>
# End of Log directives.
###
### ServerTokens
### This directive configures what you return as the Server HTTP response
### Header. The default is 'Full' which sends information about the OS-Type
### and compiled in modules.
### Set to one of: Full | OS | Minor | Minimal | Major | Prod
### where Full conveys the most information, and Prod the least.
###
ServerTokens Full
###
### Optionally add a line containing the server version and virtual host
### name to server-generated pages (error documents, FTP directory listings,
### mod_status and mod_info output etc., but not CGI generated documents).
### Set to "EMail" to also include a mailto: link to the ServerAdmin.
### Set to one of: On | Off | EMail
###
ServerSignature On
###
### Aliases: Add here as many aliases as you need (with no limit). The format is
### Alias fakename realname
###
<IfModule mod_alias.c>
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
#
Alias /icons/ /var/www/localhost/icons/
Alias /doc /usr/share/doc
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ /var/www/localhost/cgi-bin/
ScriptAlias /protected-cgi-bin/ /var/www/localhost/protected-cgi-bin/
ScriptAliasMatch ^/~([^/]*)/cgi-bin/(.*) /home/$1/public_html/cgi-bin/$2
<IfModule mod_perl.c>
#Provide two aliases to the same cgi-bin directory,
#to see the effects of the 2 different mod_perl modes
#for Apache::Registry Mode
Alias /perl/ /var/www/localhost/perl/
#for Apache::Perlrun Mode
Alias /cgi-perl/ /var/www/localhost/perl/
</IfModule>
</IfModule>
# End of Alias directives.
###
### Redirect allows you to tell clients about documents which used to exist in
### your server's namespace, but do not anymore. This allows you to tell the
### clients where to look for the relocated document.
### Format: Redirect old-URI new-URL
###
#Redirect old-URI new-URL
###
### Directives controlling the display of server-generated directory listings.
###
<IfModule mod_autoindex.c>
#
# FancyIndexing is whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing VersionSort NameWidth=*
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.png) x-compress x-gzip
AddIconByType (TXT,/icons/text.png) text/*
AddIconByType (IMG,/icons/image2.png) image/*
AddIconByType (SND,/icons/sound2.png) audio/*
AddIconByType (VID,/icons/movie.png) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip .bz2
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py .php .php3
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
#
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
###
### Document types.
###
<IfModule mod_mime.c>
#
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
#
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage ca .ca
AddLanguage cz .cz
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage es .es
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage kr .kr
AddLanguage ltz .ltz
AddLanguage ltz .lu
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt-br .pt-br
AddLanguage pt .pt
AddLanguage ru .ru
AddLanguage sv .se
AddLanguage tw .tw
AddLanguage zh-tw .tw
#
# Specify a default charset for all pages sent out. This is
# always a good idea and opens the door for future internationalisation
# of your web site, should you ever want it. Specifying it as
# a default does little harm; as the standard dictates that a page
# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
# are merely stating the obvious. There are also some security
# reasons in browsers, related to javascript and URL parsing
# which encourage you to always set a default char set.
#
AddDefaultCharset ISO-8859-1
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
#
<IfModule mod_negotiation.c>
LanguagePriority en fr de es it da nl et el ja kr no pl pt pt-br ru ltz ca sv tw
</IfModule>
#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
<IfModule mod_negotiation.c>
ForceLanguagePriority Prefer Fallback
</IfModule>
#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
# the official list of charset names and their respective RFCs
#
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For russian, more than one charset is used (depends on client, mostly):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
#
# The set below does not map to a specific (iso) standard
# but works on a fairly wide range of browsers. Note that
# capitalization actually matters (it should not, but it
# does for some browsers).
#
# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
# for a list of sorts. But browsers support few.
#
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
#
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
#
AddType application/x-tar .tgz
AddType image/x-icon .ico
#
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi
#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var
#
# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddType text/html .shtml
AddOutputFilter INCLUDES .shtml
#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
#
# If you wish to use server-parsed imagemap files, use
#
AddHandler imap-file map
#
# To enable type maps, you might want to use
#
#AddHandler type-map var
</IfModule>
# End of document types.
###
### Action lets you define media types that will execute a script whenever
### a matching file is called. This eliminates the need for repeated URL
### pathnames for oft-used CGI file processors.
###
#Action media/type /cgi-script/location
#Action handler-name /cgi-script/location
###
### Putting this all together, we can internationalize error responses.
###
### We use Alias to redirect any /error/HTTP_<error>.html.var response to
### our collection of by-error message multi-language collections. We use
### includes to substitute the appropriate text.
###
### You can modify the messages' appearance without changing any of the
### default HTTP_<error>.html.var files by adding the line:
###
### Alias /error/include/ "/your/include/path/"
###
### which allows you to create your own set of files by starting with the
### /include/ files and copying them to /your/include/path/,
### even on a per-VirtualHost basis. The default include files will display
### your Apache version number and your ServerAdmin email address regardless
### of the setting of ServerSignature.
###
### The internationalized error documents require mod_alias, mod_include
### and mod_negotiation. To activate them, uncomment the following 30 lines.
###
# Alias /error/ "/var/www/localhost/error/"
#
# <Directory "/var/www/localhost/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en es de fr sv
# ForceLanguagePriority Prefer Fallback
# </Directory>
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
###
### Customizable error responses come in three flavors:
###
# 1) plain text
#ErrorDocument 500 "The server made a boo boo."
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
# N.B.: You can redirect to a script or a document using server-side-includes.
#
# 3) external redirects
#ErrorDocument 402 http://www.example.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will *not* be available to such a script.
<Location /manual>
Options Multiviews
ErrorDocument 404 "The document you requested has not been installed on your system."
</Location>
###
### Customize behaviour based on the browser
###
<IfModule mod_setenvif.c>
#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
BrowserMatch "^WebDAVFS" redirect-carefully
</IfModule>
# End of browser customization directives
###
### Allow server status reports, with the URL of http://servername/server-status
### Change the ".your_domain.com" to match your domain to enable.
###
<IfModule mod_status.c>
<Location /server-status>
SetHandler server-status
<IfModule mod_access.c>
Order deny,allow
Deny from all
allow from 127.0.0.1
#Allow from .your_domain.com
</IfModule>
</Location>
#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
</IfModule>
###
### Allow remote server configuration reports, with the URL of
### http://servername/server-info (requires that mod_info.c be loaded).
### Change the ".your_domain.com" to match your domain to enable.
###
<IfModule mod_info.c>
<Location /server-info>
SetHandler server-info
<IfModule mod_access.c>
Order deny,allow
Deny from all
allow from 127.0.0.1
#Allow from .your_domain.com
</IfModule>
</Location>
</IfModule>
###
### Allow remote mod_perl configuration reports, with the URL of
### http://servername/perl-status (requires that mod_perl.c be loaded).
### Change the ".your_domain.com" to match your domain to enable.
###
<IfModule mod_perl.c>
<Location /perl-status>
SetHandler perl-script
<IfDefine MODPERL2>
PerlResponseHandler Apache::Status
</IfDefine>
<IfDefine !MODPERL2>
PerlResponseHandler ModPerl::Status
</IfDefine>
<IfModule mod_access.c>
Order deny,allow
Deny from all
Allow from 127.0.0.1
</IfModule>
</Location>
</IfModule>
###
### Proxy Server directives. Uncomment the following lines to
### enable the proxy server:
###
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
# ProxyVia On
#
# To enable the cache as well, edit and uncomment the following lines:
# (no caching without CacheRoot)
#
# <IfModule mod_disk_cache.c>
# CacheRoot "/var/cache/apache2"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# #NoCache a-domain.com another-domain.edu joes.garage-sale.com
# </IfModule>
#</IfModule>
# End of proxy directives.
###
### Comment me :)
###
<IfModule mod_include.c>
# XBitHack on
</IfModule>
###
### The mod_deflate module provides the DEFLATE output filter.
### It allows output from your server to be compressed before
### being sent to the client over the network.
###
<IfModule mod_deflate.c>
<Directory "/var/www/localhost/htdocs/manual">
AddOutputFilterByType DEFLATE text/html
</Directory>
# DeflateFilterNote - Set a note to report on compression ratio
# DeflateFilterNote deflate_ratio
# LogFormat "%h %l %u %t \"%r\" %>s %b mod_deflate: %{deflate_ratio}n pct." common_with_deflate_info
# CustomLog logs/deflate.log common_with_deflate_info
# # Set the Deflate window size (1-15)
# DeflateWindowSize 10
# # Set the Deflate Memory Level (1-9)
# DeflateMemLevel 6
</IfModule>
###
### This should be changed to whatever you set DocumentRoot to.
###
<Directory /var/www/localhost/htdocs>
#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options -Indexes FollowSymLinks MultiViews
#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride All
#
# Controls who can get stuff from this server.
#
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
###
### Comment me :)
###
<Directory /var/www/localhost/perl>
AllowOverride All
Options -Indexes FollowSymLinks MultiViews ExecCGI
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
###
### Additional mod_cgid.c settings; mod_cgid has Scriptsock <path>
### for setting UNIX socket for communicating with cgid.
###
<IfModule mod_cgid.c>
# Scriptsock /cgisock
</IfModule>
###
### This is intended for your world-accessible CGI programs.
###
<Directory /var/www/localhost/cgi-bin>
AllowOverride All
Options ExecCGI
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
###
### Access to these CGI programs will be restricted.
###
<Directory /var/www/localhost/protected-cgi-bin>
AllowOverride All
Options ExecCGI
<IfModule mod_access.c>
Order deny,allow
Deny from all
Allow from 127.0.0.1
#allow from .your_domain.com
</IfModule>
</Directory>
###
### Control access to UserDir directories. The following is an example
### for a site where these directories are restricted to read-only.
###
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
###
### These settings are pretty flexible, and allow for Frontpage and XSSI
###
<Directory /home/*/public_html>
AllowOverride All
Options MultiViews -Indexes Includes FollowSymLinks
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /home/*/public_html/cgi-bin>
Options +ExecCGI -Includes -Indexes
SetHandler cgi-script
</Directory>
<IfModule mod_perl.c>
<Directory /home/*/public_html/perl>
SetHandler perl-script
PerlResponseHandler ModPerl::PerlRun
Options -Indexes ExecCGI
<IfDefine MODPERL2>
PerlOptions +ParseHeaders
</IfDefine>
<IfDefine !MODPERL2>
PerlSendHeader On
</IfDefine>
</Directory>
</IfModule>
<Directory /var/www/localhost/icons>
Options -Indexes MultiViews
AllowOverride None
<IfModule mod_access.c>
Order allow,deny
Allow from all
</IfModule>
</Directory>
<Directory /usr/share/doc>
<IfModule mod_deflate.c>
AddOutputFilterByType DEFLATE text/html
</IfModule>
Options Indexes FollowSymLinks
<IfModule mod_access.c>
Order deny,allow
Deny from all
Allow from 127.0.0.1
#allow from .your_domain.com
</IfModule>
</Directory>
<Location /index.shtml>
Options +Includes
</Location>
<IfModule mod_perl.c>
PerlModule Apache2::ModPerl::Registry
#set Apache::Registry Mode for /perl Alias
# To set subdirectories to use perl set the following
# and comment the orignial:
# <Location ~ "^/perl/.*\.pl$">
<Location "^/perl/*.pl>
SetHandler perl-script
<IfDefine MODPERL2>
PerlResponseHandler Apache2::ModPerl::Registry
</IfDefine>
<IfDefine !MODPERL2>
PerlResponseHandler ModPerl::Registry
</IfDefine>
Options -Indexes ExecCGI
PerlSendHeader On
</Location>
#set Apache::PerlRun Mode for /cgi-perl Alias
<Location /cgi-perl/*.pl>
SetHandler perl-script
PerlResponseHandler ModPerl::PerlRun
Options -Indexes ExecCGI
PerlSendHeader On
</Location>
</IfModule>
<IfModule mod_alias.c>
AliasMatch ^/manual(?:/(?:de|en|fr|ja|ko|ru))?(/.*)?$ "/var/www/localhost/htdocs/manual/$1"
</IfModule>
<Directory "/var/www/localhost/htdocs/manual">
Options Indexes
AllowOverride None
Order allow,deny
Allow from all
<Files *.html>
SetHandler type-map
</Files>
SetEnvIf Request_URI ^/manual/de/ prefer-language=de
SetEnvIf Request_URI ^/manual/en/ prefer-language=en
SetEnvIf Request_URI ^/manual/fr/ prefer-language=fr
SetEnvIf Request_URI ^/manual/ja/ prefer-language=ja
SetEnvIf Request_URI ^/manual/ko/ prefer-language=ko
SetEnvIf Request_URI ^/manual/ru/ prefer-language=ru
RedirectMatch 301 ^/manual(?:/(de|en|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
|
vhosts.conf
| Code: |
################# vhosts.conf
#This is where we store the VirtualHosts configuration.
#
#Since Apache 1.3.19, we modified the setup to include some nice tricks:
#
#- Added SuExecUserGroup [user] [group] directive so VirtualHosts now work with
# suexec directive. If set, Apache will run all cgi scripts under that
# user and group (provided the uid and gid are > 1000 for security). The
# directories and cgi files *must* belong to that user/group for the
# feature to work
#- We added the Setenv VLOG directive. This works in conjunction with
# the CustomLog in commonapache2.conf. When Setenv VLOG is set, apache will
# create a /var/log/apache2/VLOG-YYYY-MM-<ServerName>.log instead of logging
# to access_log. Use this instead of defining a special logfile for
# each vhost, otherwise you eat up file descriptors.
#- You can also specify a path for the VLOG for each Vhost, for example,
# to place the logs in each user's directory. However, if you want to
# use the file for accounting, place it in a directory owned by root,
# otherwise the user will be able to erase it.
#- I suggest only including the ErrorLog *only* if the vhost will use
# cgi scripts. Again, it saves file descriptors!
################# IP-based Virtual Hosts
#<VirtualHost 192.168.2.100>
#SuExecUserGroup jmdault jmdault
#DocumentRoot /home/jmdault/public_html
#ServerName test2.com
#Setenv VLOG /home/jmdault/logs
#ErrorLogs /home/jmdault/test2-error_log
#RewriteEngine On
#RewriteOptions inherit
#</VirtualHost>
################# Named VirtualHosts
#NameVirtualHost 111.222.33.44
#<VirtualHost 111.222.33.44>
#ServerName www.domain.tld
#ServerPath /domain
#DocumentRoot /web/domain
#</VirtualHost>
NameVirtualHost *:80
<VirtualHost *>
ServerName localhost
DocumentRoot /var/www/localhost/htdocs
</VirtualHost>
<VirtualHost *>
ServerName gyldenholt
DocumentRoot /var/www/gyldenholt/htdocs
</VirtualHost>
|
webapps_config
| Code: |
# -*- mode: sh -*-
#
# /etc/vhosts/webapp-config
# Some default variables that are shared between the
# webapp-config utility, and the webapp eclass
#
# Part of the Gentoo Linux distribution
#
# Copyright (c) 1999-2004 Gentoo Technologies, Inc
# Released under v2 of the GNU GPL
#
# Author(s) Stuart Herbert <stuart@gentoo.org>
#
# ========================================================================
# ========================================================================
# IMPORTANT:
#
# You MUST set $PVR before source'ing this file. This is automatically
# taken care of for ebuilds ... other scripts must remember to do this too!
#
# The SAME warning goes for setting $PN.
#
# See ebuild(5) for details on what $PN and $PVR are for.
#
# ========================================================================
# ========================================================================
#
# USER-EDITABLE SETTINGS
#
# Feel free to edit these settings to suit your local needs
#
# ========================================================================
# VHOST_ROOT is the directory where virtual host websites are added
# so, if your server is hosting (say)
#
# www.gentoo.org
# bugs.gentoo.org
#
# then the htdocs directory for each of these would be
#
# /var/www/www.gentoo.org/htdocs
# /var/www/bugs.gentoo.org/htdocs
#
# Change this setting *only* if you need your websites installed in
# a different physical location
#
# If you perfer to use Gentoo's optional support for the /srv service
# home file hierarchy, uncomment the second version of VHOST_ROOT
# (this should have been done for you if you installed webapp-config
# with the srvdir USE flag enabled)
VHOST_ROOT="/var/www/${G_HOSTNAME}"
# VHOST_ROOT="/srv/${G_HOSTNAME}/www"
# some web applications need to know what host they are serving up pages
# for. this information is configured when the application is installed
# by the webapp-config script
#
# changing this value *after* the application has been installed has
# no effect!!
#
# you can override this setting by using the -h switch to webapp-config
VHOST_HOSTNAME="localhost"
# VHOST_HOSTNAME="`hostname --fqdn 2>/dev/null || echo localhost`"
# what web server are you using?
# your choices are:
#
# apache-basic
#
# you can override this setting by using the -s switch to webapp-config
VHOST_SERVER="apache-basic"
# which user should own config files?
# the default is 'id -nu', which is normally the root user
#
# IMPORTANT: never set this to a numerial uid. always use the username
# or else webapp-config *will* complain that the user does not exist
#
# you can override this setting by using the -u switch to webapp-config
VHOST_CONFIG_UID="`id -nu`"
# which group should own config files?
# the default is 'id -ng', which is normally the root group
#
# IMPORTANT: never set this to a numerical gid. always use the group name
# or else webapp-config *will* complain that the group does not exist
#
# you can override this setting by using the -g switch to webapp-config
VHOST_CONFIG_GID="`id -ng`"
# what type of shared directories should be created?
# the default is 'virtual', which means that each install of the app
# does NOT get a unique copy of the directory, or the files beneath it
#
# permitted values are: server-owned, config-owned, virtual, root-owned
#
# you can override this setting by using the --virtual-dirs switch to
# webapp-config
VHOST_CONFIG_VIRTUAL_DIRS="virtual"
# what type of shared files should be created?
# the default is 'virtual', which means that each install of the app
# does NOT get a unique copy of the files
#
# permitted values are: server-owned, config-owned, virtual
#
# you can override this setting by using the --virtual-files switch to
# webapp-config
VHOST_CONFIG_VIRTUAL_FILES="virtual"
# where should drop-in config files for Apache et al go?
#
# these files will be called <server>-<app>.conf. They are quite rare,
# but are needed from time to time by the odd application or two
VHOST_CONFIG_DIR="${VHOST_ROOT}/conf"
# which user & group should own the files by default?
#
# the default is for files to be owned by the superuser root, so that
# they cannot be tampered with by other users
#
# this setting affects the files and directories installed by the ebuild,
# and it affects some directories created by webapp-config. It does not
# affect any of the files installed by webapp-config at this time.
VHOST_DEFAULT_UID="root"
VHOST_DEFAULT_GID="root"
# what type of links do you want to use?
#
# starting with webapp-config v1.10, the default behaviour is to attempt
# to hardlink a file from /usr/share/webapps/* first. If the hardlink
# fails (normally because /usr and /var | /srv are on different filesystems)
# webapp-config will fall back to making a physical copy of the file
# instead
#
# NOTE:
# we have moved to hardlinks because not all web-based packages work
# when their files are symlinked in
#
# please do not raise bugs about packages that do not work when
# symlinked
#
# VHOST_LINK_TYPE="soft"
# what are the names of your document directories?
#
# by default, your website lives in /var/www/<hostname>/htdocs. If you
# run webapp-config with the --secure switch, your website instead lives
# in /var/www/<hostname>/htdocs-secure.
#
# you can change the default names of 'htdocs' and 'htdocs-secure' by
# editing these two variables
VHOST_HTDOCS_INSECURE="htdocs"
VHOST_HTDOCS_SECURE="htdocs-secure"
# ========================================================================
# END OF USER-EDITABLE SETTINGS
# ========================================================================
# ========================================================================
# EDIT THE VARIABLES BELOW THIS LINE AT YOUR OWN RISK
#
# These variables are used by the webapp.eclass component of Portage,
# and by /usr/sbin/webapp-config.
#
# If you break your Gentoo installation by changing these settings, then
# re-emerge the webapps-config package to restore the default values
#
# When webapp-config is upgraded, it may add to and/or change the value of
# variables listed here. If you do not merge in these changes, you will
# probably find that webapp-config will break in horrible ways.
#
# etc-update is NOT optional ;-)
#
# ========================================================================
MY_APPSUFFIX="${PN}/${PVR}"
MY_APPROOT="/usr/share/webapps"
MY_APPDIR="${MY_APPROOT}/${MY_APPSUFFIX}"
MY_PERSISTROOT="/var/db/webapps"
MY_PERSISTDIR="${MY_PERSISTROOT}/${MY_APPSUFFIX}"
MY_HTDOCSBASE="htdocs"
MY_HTDOCSDIR="${MY_APPDIR}/${MY_HTDOCSBASE}"
G_HTDOCSDIR="${VHOST_ROOT}/${G_HTDOCSBASE:-$MY_HTDOCSBASE}"
MY_HOSTROOTBASE="hostroot"
MY_HOSTROOTDIR="${MY_APPDIR}/${MY_HOSTROOTBASE}"
MY_CGIBINBASE="cgi-bin"
MY_CGIBINDIR="${MY_HOSTROOTDIR}/${MY_CGIBINBASE}"
MY_ICONSBASE="icons"
MY_ICONSDIR="${MY_HOSTROOTDIR}/${MY_ICONSBASE}"
MY_ERRORSBASE="error"
MY_ERRORSDIR="${MY_HOSTROOTDIR}/${MY_ERRORSBASE}"
MY_SQLSCRIPTSDIR="${MY_APPDIR}/sqlscripts"
MY_HOOKSCRIPTSDIR="${MY_APPDIR}/hooks"
MY_SERVERCONFIGDIR="${MY_APPDIR}/conf"
WA_CONFIGLIST="${MY_APPDIR}/config-files"
WA_SOLIST="${MY_APPDIR}/server-owned-files"
WA_POSTINSTALLINFO="${MY_APPDIR}/post-install-instructions.txt"
WA_RUNBYCGIBINLIST="${MY_APPDIR}/run-by-cgi-bin"
WA_VIRTUALLIST="${MY_APPDIR}/virtuals"
WA_INSTALLSBASE="installs"
WA_INSTALLS="${MY_PERSISTDIR}/${WA_INSTALLSBASE}"
# when problems are detected, where should the user report bugs to?
MY_BUGSURL="http://bugs.gentoo.org/"
# which version of webapp-config is this file for?
#
# we have a problem when users upgrade webapp-config. It turns out that
# they don't explicitly upgrade webapp-config ... instead, webapp-config
# gets because it is a dependency for a web-based package.
#
# unfortunately, this means that any changes to this config file do not
# get installed (through etc-update or equivalent) until after the web-
# based package has been installed. We end up trying to install the
# package using a partial install of webapp-config
#
# how can we work around this?
#
# the only way to work around this is to put some sort of version-control
# marker in this config file. webapp-config and this file must agree on
# what this marker is, otherwise webapp-config will refuse to work
WA_CONF_VERSION=2
# ========================================================================
# END OF CONFIG FILE
# ========================================================================
|
Thanks for all the help so far. This is truly confusing.
Regards,
Remillard
_________________
This signature is printed with 100% post-consumer recycled electrons. |
|
| Back to top |
|
|
Remillard
Apprentice
Joined: 07 Mar 2003
Posts: 200
Location: Irvine, CA
|
| Posted: Wed Jul 28, 2004 5:32 pm Post subject: |
|
|
I thought I'd throw this out there at the top of the list again, in case someone had some ideas. I put the whole of apache2.conf and others up in the previous post. Is there something quirky about them?
Remillard
_________________
This signature is printed with 100% post-consumer recycled electrons. |
|
| Back to top |
|
|
Jazzer
n00b
Joined: 28 Apr 2003
Posts: 8
|
| Posted: Fri Jul 30, 2004 8:29 pm Post subject: |
|
|
Maybe it's just me, but why would you put "localhost" in the virtual host file? "localhost" is defined by default (ie. root level DocumentRoot directive), try removing the localhost definition from your virtual host file. Also, try adding a real IP address (instead of 127.0.0.1) for your virtual domain in the /etc/hosts file, I don't think virtual domains will work off the loopback interface.
On The Jazz
 |
|
| Back to top |
|
|
intgr
Apprentice
Joined: 23 Jun 2004
Posts: 225
Location: Earth, Sol, Milky Way
|
| Posted: Fri Jul 30, 2004 8:44 pm Post subject: |
|
|
| Jazzer wrote: | | Maybe it's just me, but why would you put "localhost" in the virtual host file? "localhost" is defined by default (ie. root level DocumentRoot directive), try removing the localhost definition from your virtual host file. |
All hosts are, if they aren't explicitly defined in a VirtualHost directive. And just to be a safe side, there shouldn't be any root level DocumentRoot directives on a VirtualHost server.
| Jazzer wrote: | | Also, try adding a real IP address (instead of 127.0.0.1) for your virtual domain in the /etc/hosts file, I don't think virtual domains will work off the loopback interface. |
Yes, they do work.
To Remillard:
Btw, didn't I solve this problem yesterday? Did Jazzer just bring up an old thread?  |
|
| Back to top |
|
|
Remillard
Apprentice
Joined: 07 Mar 2003
Posts: 200
Location: Irvine, CA
|
| Posted: Sat Jul 31, 2004 3:38 am Post subject: |
|
|
Yeah, this was my original thread. While it was growing stale I was doing more debug and came up with the 2nd post .
_________________
This signature is printed with 100% post-consumer recycled electrons. |
|
| Back to top |
|
|
toniocartonio
n00b
Joined: 04 Mar 2004
Posts: 38
Location: Malmö - Skåne
|
| Posted: Fri Sep 03, 2004 10:11 am Post subject: |
|
|
just a quick observation... (and maybe i am saying a lot of bullshit  )
you are trying to create a virtual host on /var/www/domain, but on apache2.conf you tell apache that the document root is /var/www/localhost/htdocs ... maybe it is related to that? maybe you need to put the document root to /var/www for that to work...
_________________
http://www.francescoinsvezia.net - la mia vita fra la gnokka (powered by gentoo linux!) |
|
| Back to top |
|
|
intgr
Apprentice
Joined: 23 Jun 2004
Posts: 225
Location: Earth, Sol, Milky Way
|
| Posted: Fri Sep 03, 2004 12:08 pm Post subject: |
|
|
To: toniocartonio
Sorry, this problem has already been solved in this thread. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
