| View previous topic :: View next topic |
| Author |
Message |
()
l33t
Joined: 25 Nov 2002
Posts: 610
|
 Posted: Sat Jul 10, 2004 7:19 pm Post subject: Kernel (2.6.7) oops with USB2/nForce2 |
 |
|
Are anyone having success with enabling support for their nVidia USB2 controller, in 2.6.x kernels? If I compile EHCI (USB 2) support statically into the 2.6.7-ck5 kernel, everything freezes after the nVidia controller is discovered at bootup. With kernel 2.6.7-mm6 I got a little further, but the kernel oopsed when I plugged in the device (a Western Digital external harddrive). Currently I have it working with a 2.6.6 vanilla kernel, but the kernel oopses if I don't unmount the drive before rebooting. The motherboard is Asus A7N8X to be specific, I also have an nVidia graphics card (I understand this combination can be problematic).
_________________
to be concerned is good |
|
| Back to top |
|
 |
jknutson
n00b
Joined: 30 Apr 2004
Posts: 63
|
| Posted: Sat Jul 10, 2004 9:56 pm Post subject: |
|
|
| I don't have any usb2.0 devices to test, but I don't have any problems booting with EHCI support on my nforce2 board with both gentoo-dev and ck-sources. I've got OCHI and EHCI built-in with usbhid and usb-storage as modules (autoloaded). I've had a little trouble with HID and usb-storage in the past and this setup seemed to work best for my board. |
|
| Back to top |
|
|
()
l33t
Joined: 25 Nov 2002
Posts: 610
|
| Posted: Sat Jul 10, 2004 10:11 pm Post subject: |
|
|
I got usbhid and usb-storage built-in, maybe I should modularize those to see if it makes a difference .. You're using 2.6.7 kernels (ck and gentoo)? Do you have an nVidia graphics card btw?
_________________
to be concerned is good |
|
| Back to top |
|
|
jknutson
n00b
Joined: 30 Apr 2004
Posts: 63
|
| Posted: Sat Jul 10, 2004 10:41 pm Post subject: |
|
|
| Yeah, it's worked with 2.6.7-ck5 and 2.6.7-gentoo-r8. I've got an ATi card (R8500). |
|
| Back to top |
|
|
adelante
Tux's lil' helper
Joined: 19 Apr 2003
Posts: 133
Location: South Africa - Johannesburg
|
| Posted: Thu Jul 15, 2004 10:51 am Post subject: |
|
|
I got the same problem with the 2.6.7 kernel....
I have tried it on 3 different systems and I get the same problem everytime...
It boots up to:
| Quote: |
hdd: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 > p4
hdc: ATAPI 40X CD-ROM CD-R/RW CD-MRW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
ieee1394: raw1394: /dev/raw1394 device initialized
|
it gets up the ieee1394 and just hangs there. |
|
| Back to top |
|
|
|
Kernel & Hardware
